OLYMPUS C-720 UZ Notice of Modification V1R5
C-720UltraZoom
E. NOTICE OF MODIFICATION
1. VERSION-UP OF FIRMWARE (1) ..........................................................E-2
2. COUTERMEASURE OF TOP PANEL-ASSY .........................................E-3
3. COUTERMEASURE OF THE STATIC ELECTRICITY ON MC-PCA# ...E-4
4. VERSION-UP OF FIRMWARE (2) ..........................................................E-5
5. VERSION-UP OF FIRMWARE (3) ..........................................................E-6
6. VERSION-UP OF FIRMWARE (4) ..........................................................E-7
7. VERSION-UP OF FIRMWARE (5) ..........................................................E-8
8. VERSION-UP OF FIRMWARE (6) ..........................................................E-9
9. VERSION-UP OF FIRMWARE (7) ........................................................E-10
10. VERSION-UP OF FIRMWARE (8) ......................................................E-11
11. CHANGE OF PARTS NUMBER FOR LENS_ASSY ..........................E-12
Rev.5
SERVER_DIS E-1 Ver.1
E. NOTICE OF MODIFICATION C-720UltraZoom
SUBJECT Version-up of Firmware (1) 2002.Jul.09
DESCRIPTION : Version-up of Firmware
OLD NEW
USER: E0031015 E0031016
BOOT: S0031000 S0031000
REASON :
Flash firing defect under the backlight condition.
REMARKS :
<Updating procedure>
Please refer to D-2 of Service manual.
<Change classification>
Running change.
Rev.1
E-2 Ver.1
C-720UltraZoom E. NOTICE OF MODIFICATION
SUBJECT Countermeasure of Top Panel-ASSY 2002.Jul.09
DESCRIPTION : Top Panel-ASSY (VJ349100) has been modified
REASON :
Flash will not fire sometimes.
REMARKS :
<Distinction of the modified part>
Un-Modified part Modified part
No marking Black or White marking
The Parts classified to Inspection are
Black-dot marking.
The Parts by which countermeasure
processing was carried out are Whitedot marking.
<Correspondence>
Replace Top Panel-ASSY(VJ349100) when the customer complains.
Rev.1
Ver.1 E-3
E. NOTICE OF MODIFICATION C-720UltraZoom
SUBJECT Countermeasure of the static electricity on MC-PCA 2002.Jul.09
DESCRIPTION : Custom setting value may be reset by the static electricity
REASON :
The camera may be reset by the static electricity which occurs when the Smartmedia card is
inserted/removed into/from the Card Slot on the MC-PCA.
REMARKS :
<Change classification>
Serial number: The last 5 digits of S/N (Camera body) is greater than 50000.
<Modification method>
Add the Resistance 330ohm(2pcs.) between the write protection pin on the card slot and the
soldering pattern of MC-PCA. (Refer to D-13)
Modification parts 330ohm(KR669400) are supplied free of charge.
<Classification of MC-PCA>
The selected parts
(Screening)
New MC-PCA
The serial number on the card slot
is A12. (The last 3 digits)
New MC-PCA
The silk print on MC-PCA is -04.
(The last 2 digits)
Rev.1
E-4 Ver.1
Loading...