Page 1
X-450 / D-535ZOOM / C-370ZOOM
E. NOTICE OF MODIFICATION
[1] Version-up of Firmware 1 ................................................................................ E-2
[2] Version-up of Firmware 2 ................................................................................ E-3
[3] Version-up of Firmware 3 ................................................................................ E-4
Rev.1
E-1 Ver.1
Page 2
E. NOTICE OF MODIFICATION
X-450 / D-535ZOOM / C-370ZOOM
SUBJECT
Version-up of Firmware 1
Jan.13.2005
DESCRIPTION : Change of firmware for X-450 / D-535ZOOM / C-370ZOOM.
OLD NEW
For all destination Ver.1.005 >>> Ver.1.008
REASON : Countermeasure of following items for X-450 / D-535ZOOM / C-370ZOOM.
1) Modification of unstable AWB.
2) When changing the mode from playback mode to self-portrait mode, the icon of macro or super
macro is displayed on the monitor.
3) When changing the mode from menu to self-portrait mode, the flush button doesn’t work.
4) The motion of digital zoom may be slow.
5) While the self-timer is worked, the icon of flash standby is disappeared sometimes.
6) When pressing the Zoom button or Power button during playback, the noise is occurred on the
picture.
REMARKS :
Update procedure
Refer to D-2 of Service manual.
OBJECTS:
All returned units from the market.
Rev.1
E-2 Ver.1
Page 3
X-450 / D-535ZOOM / C-370ZOOM
E. NOTICE OF MODIFICATION
SUBJECT
Version-up of Firmware 2
Jan.13.2005
DESCRIPTION : Change of firmware for X-450 / D-535ZOOM / C-370ZOOM.
OLD NEW
For all destination Ver.1.008 >>> Ver.1.015
REASON : Countermeasure of following items for X-450 / D-535ZOOM / C-370ZOOM.
1) When the language of menu is Deutsch:
While the following operation (backup, pixel mapping, format, all-frame erase, DPOF) is in process,
the word meaning "erase" in Deutsch is displayed on the LCD monitor. The word has been changed
to "ARBEITET" meaning "during processing".
REMARKS :
Update procedure
Refer to D-2 of Service manual.
OBJECTS:
All returned units from the market.
Rev.1
E-3Ver.1
Page 4
E. NOTICE OF MODIFICATION
X-450 / D-535ZOOM / C-370ZOOM
SUBJECT
Version-up of Firmware 3
Jan.13.2005
DESCRIPTION : Change of firmware for X-450 / D-535ZOOM / C-370ZOOM.
OLD NEW
For all destination Ver.1.015 >>> Ver.1.100
REASON : Countermeasure of following items for X-450 / D-535ZOOM / C-370ZOOM.
1) When the camera cannnot record the data by write error, it displays "Write protect" on the monitor.
Change the indication from "Write protect" to "Card error".
2) Modified as follows:
While displaying "Card error" at the time of above-mentioned card error (1), the camera doesn’t
accept the operations other than the switching between shooting mode and playback mode or PW
button.
3) Modified as follows:
When performing PW-OFF/ON after card error occurred, the camera enters the shooting standby.
When the write error occurred again, the operation (1) is performed. Without the write error, the
usual operation is performed.
4) Modified as follows:
When changing to playback mode after card error (1) occurred, "Picture Error" on the write error
picture is displayed.
5) Modified as follows:
When there are 24 more fail block on the card check of power on, shooting the picture is prohibited
displaying "Write Protect" on the monitor.
6) Modified the defect that the camera sometimes hangs up by correcting the AWB at Panorama
shooting.
REMARKS :
Update procedure
Refer to D-2 of Service manual.
OBJECTS:
All returned units from the market.
Rev.1
E-4 Ver.1
Loading...