Page 1
B. DISASSEMBLY AND ASSEMBLY PROCEDURE
C160/D-395
B. DISASSEMBLY AND ASSEMBLY
PROCEDURE
[1] B-2
[2] B-3
[3] B-4
[4] BOARD LOCATION ................................................................................................ B-5
B-1
Ver. 1
Page 2
B. DISASSEMBLY AND ASSEMBLY PROCEDURE C-160/D-395
[1] REMOVAL OF FRONT COVER ASS’Y, INSIDE ASS’Y, AND BACKCOVER ASS’Y
Disassembly perform as follows (1, 2...14) and assembly perform by reversing the disassembly steps (14, 13...1). Be sure to
discharge the main capacitor in procedure 13, then continue to disassembling.
! Beware of electric shock !
Danger of electric shock.
Use a discharging tool to remove
the electrical charge before working.
5
13
11
Discharge
CN1
CN5
2
2
4
2
9
2
3, 8
1, 6
7
2
1. Open XD CARD COVER
2. Six screws 1.7X5
3. Open Battery Cover
4. Open DC IN & USB RUBBER COVER
5. Back Cover
6. xD Card Cover
7. xD CARD COVER AXIS
8. Battery Cover
10
12
9. Screw 1.7X4
10. Spider Seat
11. Connector
12. Front Cover
13. Discharge
B-2 Ver.1
Page 3
B. DISASSEMBLY AND ASSEMBLY PROCEDUREC-160/D-395
[2] REMOVAL OF MAIN BOARD ,POWER BOARD ,AND LCD ASS’Y
10
11
13
12
17
3
4
8
5
1
4
15
14
RED RED
16
WHITE
BLACK
PINK
BLACK
18
8
2
9
6
RED
RED
BLACK
BLACK
2
7
1. Connector
2. Connector (LCD-FPC)
3. LCD
4. Two screws 1.7x4
5. LCD Holder
6. Unsolder (4 wires)
7. Unsolder (FPC)
8. Three Screws 1.7X4
9. MAIN PCB
10. Two screws 1.7x2.5
11. RELEASE SWITCH ESD PLATE
12. RELEASE SWITCH
13. SPEAKER
14. Unsolder (6 wires)
15. Four screws 1.7x4
16. POWER PCB
17. FLASH
18. CAP UNIT
B-3Ver.1
Page 4
B. DISASSEMBLY AND ASSEMBLY PROCEDURE C-160/D-395
[3] REMOVAL OF OVF AND LENS ASSEMBLY
4
1. Unsolder (CCD)
2. Three screws 1.7X4.5
3. Connector
4. MAIN PCB
5. CCDPLATEFOR
6. FIXED PLATEFOR CCD
7. CCD
8. SPACER RUBBER
9. LPF
10. Two screws 1.4x4
11. View Finder
10
11
2
1
5
6
7
8
9
3
B-4 Ver.1
Page 5
[4] BOARD LOCATION
B. DISASSEMBLY AND ASSEMBLY PROCEDUREC-160/D-395
Power Board Main Board
B-5Ver.1
Loading...