B. DISASSEMBLY AND ASSEMBLY PROCEDURE C-100/D-370
B. DISASSEMBLY AND ASSEMBLY
PROCEDURE
[1] REMOVAL OF CABINET BACK AND CABINET FRONT....................................... B-2
[2] REMOVAL OF LCD AND TB1 BOARD ..................................................................B-3
[3] REMOVAL OF CP1 BOARD AND LENS ASSEMBLY ........................................... B-4
[4] BOARD LOCATION ................................................................................................ B-4
B-1 Ver.1
B. DISASSEMBLY AND ASSEMBLY PROCEDURE C-100/D-370
[1] REMOVAL OF CABINET BACK AND CABINET FRONT
Disassembly perform as follows and assembly perform by reversing the disassembly steps.
Be sure to discharge the main capacitor, then continue to disassembling.
! Beware of electric shock
Danger of electric shock.
Use a discharging tool to remove
the electrical charge before working.
14
13
1. Open the cover card
2. Open the cover jack
3. Open the cover battery
4. Five screws 1.7 x 4.5
5. Two screws 1.7 x 6.0
6. Cabinet back
7. Cover card
10. Remove the solder
Brown
Yellow
Gray
7
Yellow(Up)
White(Down)
8. Cover battery
9. Discharge both edge of C5412
10. Remove the solder
11. Cabinet front
12. Stand
13. Screw 1.7 x 3.5
14. TB2 board
1
5
4
6
2
3
11
4
9.Discharge both edge
of C5412.
8
12
B-2 Ver.1/Rev.2
B. DISASSEMBLY AND ASSEMBLY PROCEDUREC-100/D-370
[2] REMOVAL OF LCD AND TB1 BOARD
1. LCD
2. Remove the solder
3. FPC
4. Three screws 1.7 x 3.5
5. Holder monitor
6. Two screws 1.7 x 3.5
7. Remove the solder
8. Gray
9. Black
10. Black
11. Red
12. Green
13. Blue
14. Brown
15. Gray
16. Screw 1.7 x 3.5
17. TB1 board
4
1
5
Pink
3
4
2
White
Pink(Up)
White(Down)
8
A
9
B
10
11
12
13
14
C
6
15.Gray
Red(Up)
Green
A
B
Brown
C
Blue
16
17
7
Black(Down)
Blue, brown, green
Black
Red
B-3Ver.1/Rev.2
B. DISASSEMBLY AND ASSEMBLY PROCEDURE C-100/D-370
[3] REMOVAL OF CP1 BOARD AND LENS ASSEMBLY
1. Screw 1.7 x 2.5
2. Two screws 1.7 x 6
3. Connector
4. CP1 board
4
2
1
[4] BOARD LOCATION
Lens
3
TB2 board
CCD
CP1 board
TB1 board
B-4 Ver. 1
Loading...