Nuance PDF CREATE! 3-HELP User Manual

ScanSoft®PDF Create! 3

Online Help

ScanSoft®PDF Create! 3 Online Help

ScanSoft, Inc. provides this publication without representation or warranty of any kind. ScanSoft, Inc. reserves the right to revise this publication and to change the information contained in this publication

Without limiting the rights under copyright reserved above, no part of this publication may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means, including, without limitation, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission

of ScanSoft, Inc. ScanSoft and the PDF Create! logo are registered trademarks or trademarks of ScanSoft, Inc. in the United

States and/or other countries. All other company names and product names in this publication may be the trademarks of their respective owners, including the following:

Microsoft, Windows, Microsoft Word, Excel, Explorer and PowerPoint are registered trademarks and/or trademarks of Microsoft Corporation in the U.S. and other countries. Adobe Acrobat and Adobe Reader are

trademarks of Adobe Systems Inc. InstallShield is a registered trademark of InstallShield Software Corporation. Pentium is a trademark of Intel Corporation. Zeon and DocuCom are trademarks of Zeon Corporation or its subsidiaries and may be registered in certain jurisdictions.

A publication of

ScanSoft, Inc. 9 Centennial Drive

Peabody, MA 01960 United States of America

Last modified: February 24, 2005

www.scansoft.com

Using ScanSoft PDF Create!

ScanSoft®PDF Create! 3 enables you to generate PDF files directly from any Microsoft Windows (98, Me, NT, 2000, XP) application using the Print command. In Microsoft Word, Excel and PowerPoint, you can also use the toolbar shortcut to print a PDF file.

The PDF files will be viewable, printable, searchable and editable (they will be “Normal” PDF files) unless the source file came from an imaging application or

security permissions prohibit some of these functions.

Scope of this Help

This Online Help tells you how to create PDF files using the Print dialog box in your print-enabled applications. It tells how to use the ScanSoft PDF Create!

Properties dialog box to control different aspects of PDF creation. This Help does not document the following items:

 PDF Create! Assistant

This Assistant is called from the Windows Start menu. It lets you compile a list of files to be converted. These files may have been created in different applications.

Choose to combine the files in the given order to create a single PDF file or have each file converted separately. Files can also be overlaid for the conversion. Please click the Help button in the Assistant to access its own Help system.

 PDF Links dialog box

This dialog box can be accessed from Microsoft Word, from a toolbar button or an item in the PDF Create! menu. It lets you define settings that are applicable only when creating a PDF from a Word document. Define which paragraph styles

in the Word document should be converted to bookmarks in the PDF, which comments should be transferred and how hyperlinks should appear. Please click the Help button in the PDF Links dialog box to access its own Help system.

System Requirements

The following are the minimum system requirements to install and run ScanSoft PDF Create! 3:

 A computer with an Intel  Microsoft Windows

2000 (SP4), or Windows XP (SP1, SP2)

Pentium®or higher processor

98 (from second edition), Windows Me, Windows

 Microsoft Internet Explorer 5.1 or above  Microsoft Word 97

, Microsoft Word 2000, Microsoft Word XP or Microsoft

Word 2003

 64 MB of memory (RAM), 128 MB recommended  50 MB of free hard disk space for application files plus 5MB working space

during installation

 5 MB for Microsoft Installer (MSI) if not present. (This is present as part of

the operating system in Windows Me, Windows 2000 and Windows XP)

 SVGA monitor with 256 colors, but preferably 16-bit color (called High

Color in Windows 2000 and Medium Color in XP) and 800 x 600 pixel resolution

 Windows-compatible pointing device  CD-ROM drive for installation

Note:Performance and speed will be enhanced if your computer’s processor,

memory, and available disk space exceed minimum requirements.

Note:Disk space and memory requirements may be higher on some operating

systems.

Installation and Activation

Please remove any version of the Zeon DocuCom PDF printer driver utility before the installation. ScanSoft PDF Create! is a customized and updated version of

that utility and it cannot co-exist with other versions.

1. Insert the CD-ROM in your CD-ROM drive

The installation program will start automatically. If it does not, locate your CDROM drive in Windows Explorer and double-click the program’s setup.exe file.

Select a language for installation. The InstallShield®Wizard will appear. (If you have downloaded the program from the ScanSoft web site, double-click its

setup.exe file.)

Supports only File/Print. No ScanSoft PDF toolbar buttons.

2. Follow the on-screen instructions

You must accept the license agreement in order to proceed. You must enter a serial number. You will find this on the CD sleeve or on the

ScanSoft web site at the download location. Be sure to keep the serial number in a safe place; it is fully checked only during product activation and is also needed

for any re-installations. The installer offers a default location for the program. Accept it or define a

different one.

3. Click Finish

Registration runs at the end of installation. Select Register Online to establish a connection to the ScanSoft web site. We provide an easy electronic form that can

be completed in a few moments. When the form is filled, click Submit. If you decide not to register or to be reminded later, you can go to

http://www.scansoft.com/ to register online any time later. Click on Support and

from the main support screen choose Register in the left-hand column. For a statement on the use of your registration data, please see ScanSoft’s

4. Activate

You will be invited to activate the product at the end of installation. Please ensure that web access is available. Provided your serial number is found at its storage

location and has been correctly entered, no user interactionis required and no personal information is transmitted.

If you do not activate the product at installation time, you will be invited to do this each time you invoke the program. PDF Create! can be launched only five times without activation.

Note:The user performing installation or un-installation should have

Administrator rights on the computer. Administrator rights are recommended for activation and de-activation.

Note:You will be allowed to re-install the program a reasonable number of times

without having re-activation problems, because un-installation includes a deactivation step. The serial number is needed for re-installation and web access is

needed for de-activation and re-activation.

Network Installation: The program can be installed on a server and pushed to

local computers in a Local Area Network (LAN). Please contact ScanSoft for license information and separate documentation.

Creating a PDF document

To create a PDF document:

1. Create a new document or open an existing document in any Windows application.

2. On the File menu, select Print. In the Printer dialog box select the ScanSoft PDF Create! as your active

printer if it is not already displayed.

3. Click OK.

4. Specify printing options. Enter the target PDF file name and location in the Save As dialog box.

To view the PDF file, select View Resulting PDF.

5. Click Save.

Note:Your printing options may differ, depending on the settings you specify for

the ScanSoft PDF Create! driver, as described in the next section.

Modifying PDF Create! Behavior

The ScanSoft PDF Create! Properties dialog box includes two tabs, General and PDF Settings, where you can modify driver settings. A third tab, About, provides

version information about the product. You can set printing preferences for the current document only, or for all

subsequent documents.

To set properties for the current document:

1. On the File menu, select Print. In the Printer dialog box, select ScanSoft PDF Create! as your active printer

if it is not already displayed.

2. Click Properties.

3. Select each of the tabs and specify settings for creating PDF files.

+ 11 hidden pages