The information contained within this supplement revises the
TIRE CHAINS information in the ⬙Maintenance and do-it-yourself⬙ section of the
2011 - 2013 Nissan Quest Owner’s Manual.
Read carefully and keep in the vehicle.
Printing: January 2014 (02)
Publication number: SU14E 0E52U1
TIRE CHAINS
CAUTION
● NISSAN recommends using the following tire cables made by Peerless Chain
Company on P235/55R18 size tire due
to limited tire clearance. Call 800-5338056 to order tire chains for your vehicle.
— P235/55R18 - Peerless Chain part
number SC1040
Failure to use the correct traction device will cause damage to the brakes,
suspension or other vehicle parts. Or,
you should install P225/65R16 size tire
on your vehicle.
● Only certain SAE class “S” tire chains
can be used on this vehicle. Using the
wrong Class “S” chains on this vehicle
will cause damage to the vehicle. If you
plan to use tire chains/cables, you
should use a tire chain that meets the
minimum clearances for your vehicle.
Use of tire chains may be prohibited according to
location. Check the local laws before installing tire
chains. When installing tire chains, make sure they
are the proper size for the tires on your vehicle and
are installed according to the chain manufacturer’s
suggestions.
For 18-inch size tire, the tire chain part number and
Peerless Chain Company phone number are correct at the time of printing that is shown on the back
cover of this Owner’s Manual. Always confirm the
correct part numbers with Peerless Chain Company before ordering. Only use other types of traction devices if the traction device manufacturer
recommends it for use on your specific vehicle and
the tire and wheel installed on your vehicle.
JVM0304X
16-inch size tire
For 16-inch size tire, use a tire chain that is de-
A
signed to provide the specified space
the installed tire chain
2
the rim
as shown on the chart.
䊊
1
and where the tire meets
䊊
䊊
between
Wheel sizeMinimum space required
16 in1.8 in (44 mm)
A tire chain that provides the specified amount of
space will provide the necessary clearance between the tire and the closest vehicle suspension
or body component. The minimum clearances are
determined using the factory equipped tires. Other
types may damage your vehicle. Use chain tensioners when recommended by the tire chain manufacturer to ensure a tight fit. Loose end links of the tire
chain must be secured or removed to prevent the
possibility of whipping action damage to the fenders or underbody. If possible, avoid fully loading
your vehicle when using tire chains. In addition,
drive at a reduced speed. Otherwise, your vehicle
may be damaged and/or vehicle handling and performance may be adversely affected.
Tire chains must be installed only on the
front wheels and not on the rear wheels.
Never install tire chains on a TEMPORARY USE
ONLY spare tire.
Do not use tire chains on dry roads. Driving with tire
chains in such conditions can cause damage to the
various mechanisms of the vehicle due to some
overstress.
Foreword
Welcome to the growing family of new NISSAN
owners. This vehicle is delivered to you with
confidence. It was produced using the latest
techniques and strict quality control.
This manual was prepared to help you understand the operation and maintenance of your
vehicle so that you may enjoy many miles of
driving pleasure. Please read through this
manual before operating your vehicle.
A separate Warranty Information Booklet
explains details about the warranties covering your vehicle. The NISSAN Service
and Maintenance Guide explains details
about maintaining and servicing your vehicle. Additionally, a separate Customer
Care/Lemon Law Booklet (U.S. only) will
explain how to resolve any concerns you
may have with your vehicle, as well as
clarify your rights under your state’s lemon
law.
Your NISSAN dealer knows your vehicle best.
When you require any service or have any
questions, we will be glad to assist you with the
extensive resources available to us.
READ FIRST — THEN DRIVE SAFELY
Before driving your vehicle, read your Owner’s
Manual carefully. This will ensure familiarity with
controls and maintenance requirements, assisting you in the safe operation of your vehicle.
WARNING
IMPORTANT SAFETY INFORMA-
TION REMINDERS FOR SAFETY!
Follow these important driving rules to
help ensure a safe and comfortable trip
for you and your passengers!
. NEVER drive under the influence of
alcohol or drugs.
. ALWAYS observe posted speed lim-
its and never drive too fast for
conditions.
. ALWAYS give your full attention to
driving and avoid using vehicle
features or taking other actions that
could distract you.
. ALWAYS use your seat belts and
appropriate child restraint systems.
Pre-teen children should be seated
in the rear seat.
. ALWAYS provide information about
the proper use of vehicle safety
features to all occupants of the
vehicle.
. ALWAYS review this Owner’s Man-
ual for important safety information.
MODIFICATION OF YOUR VEHICLE
This vehicl e should not be modified.
Modification could affect its performance,
safety or durability, and may even violate
governmental regulations. In addition,
damage or performance problems resulting from modification may not be covered
under NISSAN warranties.
WHEN READING THE MANUAL
This manual includes information for all
options available on this model. Therefore,
you may find some information that does
not apply to your vehicle.
All information, specifications and illustrations in
this manual are those in effect at the time of
printing. NISSAN reserves the right to change
specifications or design at any time without
notice.
IMPORTANT INFORMATION ABOUT
THIS MANUAL
You will see various symbols in this manual. They
are used in the following ways:
WARNING
This is used to indicate the presence of
a hazard that could cause death or
serious personal injury. To avoid or
reduce the risk, the procedures must
be followed precisely.
CAUTION
This is used to indicate the presence of
a hazard that could cause minor or
moderate personal injury or damage to
your vehicle. To avoid or reduce the risk,
the procedures must be followed carefully.
SIC0697
If you see the symbol above, it means “Do notdo this” or “Do not let this happen”.
Arrows in an illustration that are similar to those
above call attention to an item in the illustration.
CALIFORNIA PROPOSITION 65
WARNING
WARNING
Engine exhaust, some of its constituents, and certain vehicle components
contain or emit chemicals known to the
State of California to cause cancer and
birth defects or other reprodu ctive
harm. In addition, certain fluids contained in vehicles and certain products
of component wear contain or emit
chemicals known to the State of California to cause cancer and birth defects
or other reproductive harm.
If you see a symbol similar to those above in an
illustration, it means the arrow points to the front
of the vehicle.
Arrows in an illustration that are similar to those
above indicate movement or action.
CALIFORNIA PERCHLORATE ADVISORY
Some vehicle parts, such as lithium batteries, may contain perchlorate material.
The following advisory is provided: “Perchlorate Material - special handling may
apply, see www.dtsc.ca.gov/
hazardouswaste/perchlorate.”
Bluetooth®is a trademark owned
by Bluetooth SIG, Inc., U.S.A.
and lisenced to Visteon Corporation and Clarion Co., Ltd.
Gracenote®is a registered trademark of Gracenote, Inc. The
Gracenote logo and logo type,
and the “Powered by Gracenote”
logo are trademarks of Gracenote.
XM Radio®requires a subscription, sold separately. It is not
available in Alaska, Hawaii or
Guam. For more information, visit
www.xmradio.com.
C
*
2010 NISSAN MOTOR CO., LTD.
All rights reserved. No part of this Owner’s
Manual may be reproduced or stored in a
retrieval system, or transmitted in any form, or
by any means, electronic, mechanical, photocopying, recording or otherwise, without the
prior written permission of Nissan Motor Co.,
Ltd.
NISSAN CUSTOMER CARE
PROGRAM
NISSAN CARES ...
Both NISSAN and your NISSAN dealer are dedicated to serving all your automotive needs. Your satisfaction with your vehicle and your NISSAN dealer are
our primary concerns. Your NISSAN dealer is always available to assist you with all your automobile sales and service needs.
However, if there is something that your
NISSAN dealer cannot assist you with or you
would like to provide NISSAN directly with
comments or questions, please contact the
NISSAN Consumer Affairs Department using
our toll-free number:
For U.S. customers
1-800-NISSAN-1
(1-800-647-7261)
For Canadian customers
1-800-387-0122
We appreciate your interest in NISSAN and thank you for buying a quality NISSAN vehicle.
The Consumer Affairs Department will ask for
the following information:
— Your name, address, and telephone number
— Vehicle identification number (attached to
the top of the instrument panel on the
driver’s side)
— Date of purchase
— Current odometer reading
— Your NISSAN dealer’s name
— Your comments or questions
OR
You can write to NISSAN with the information at:
For U.S. customers
Nissan North America, Inc.
Consumer Affairs Department
P.O. Box 685003
Franklin, TN 37068-5003
For Canadian customers
Nissan Canada Inc.
5290 Orbitor Drive
Mississauga, Ontario L4W 4Z5
Table of
Illustrated table of contents
0
Contents
Safety — Seats, seat belts and supplemental
restraint system
Instruments and controls
Pre-driving checks and adjustments
Monitor, heater, air conditioner, audio, phone and
voice recognition systems
Starting and driving
In case of emergency
Appearance and care
Maintenance and do-it-yourself
Technical and consumer information
1
2
3
4
5
6
7
8
9
Index
10
0 Illustrated table of contents
Seats, seat belts and Supplemental Restraint
System (SRS) ................................................... 0-2
Exterior front ..................................................... 0-3
Front seat-mounted side-impact supplemental
air bag and roof-mounted curtain side-impact
supplemental air bag systems ......................... 1-56
Seat belts with pretensioners (front seats) ......... 1-58
Supplemental air bag warning labels................. 1-59
Supplemental air bag warning light................... 1-59
Repair and replacement procedure................... 1-60
SEATS
. The seatback should not be reclined
any more than needed for comfort.
Seat belts are most effective when
the passenger sits well back and
straight up in the seat. If the seatback is reclined, the risk of sliding
under the lap belt and being injured
is increased.
SSS0133
WARNING
. Do not ride in a moving vehicle
when the seatback is reclined. This
can be dangerous. The shoulder belt
will not be against your body. In an
accident, you could be thrown into it
and receive neck or other serious
injuries. You could also slide under
the lap belt and receive serious
internal injuries.
. For the most effective protection
when the vehicle is in motion, the
seat should be upright. Always sit
well back in the seat with both feet
on the floor and adjust the seat belt
properly. See “PRECAUTIONS ON
SEAT BELT USAGE” later in this
section.
. After adjustment, gently rock in the
seat to make sure it is securely
locked.
. Do not leave children unattended
inside the vehicle. They could unknowingly activate switches or controls. Unattended children could
become in volved in serious accidents.
1-2 Safety — Seats, seat belts and supplemental restraint system
SSS0792
SSS0793
FRONT SEATS
Front manual seat adjustment
Forward and backward:
1
Pull the lever
the seat forward or backward to the desired
position. Release the lever to lock the seat in
position.
Reclining:
To recline the seatback, pull the lever
lean back. To bring the seatback forward, pull
the lever up and lean your body forward. Release
the lever to lock the seatback in position.
up and hold it while you slide
*
*
2
up and
The reclining feature allows adjustment of the
seatback for occupants of different sizes for
added comfort and to help obtain proper seat
belt fit. (See “PRECAUTIONS ON SEAT BELT
USAGE” later in this section.) Also, the seatback
can be reclined to allow occupants to rest when
the vehicle is stopped and the transmission in
the P (Park) position.
Safety — Seats, seat belts and supplemental restraint system 1-3
Seat lifter (if so equipped):
Pull up or push down the adjusting lever to
adjust the seat height until the desired position
is achieved.
Front power seat adjustment
Operating tips:
. The power seat motor has an auto-reset
overload protection circuit. If the motor
stops during operation, wait 30 seconds,
then reactivate the switch.
. Do not operate the power seat switch for a
long period of time when the engine is off.
This will discharge the battery.
See “AUTOMATIC DRIVE POSITIONER” in the
“3. Pre-driving checks and adjustments” section
for the seat position memory function (if so
equipped).
CAUTION
When adjusting the seat positions, be
sure not to contact any moving parts to
avoid possible injuries and/or damages.
1-4 Safety — Seats, seat belts and supplemental restraint system
Forward and backward:
Moving the switch
slide the seat forward or backward to the
desired position.
Reclining:
Move the recline switch
desired angle is obtained. To bring the seatback
forward again, move the switch
The reclining feature allows adjustment of the
seatback for occupants of different sizes for
added comfort and to help obtain proper seat
belt fit. (See “PRECAUTIONS ON SEAT BELT
USAGE” later in this section.) Also, the seatback
can be reclined to allow occupants to rest when
1
forward or backward will
*
2
backward until the
*
2
forward.
*
SSS1051
the vehicle is stopped and the transmission is in
the P (Park) position.
Lumbar support (if so equipped)
The lumbar support feature provides lower back
support to the occupants.
Push the front or back end of the switch to
adjust the seatback lumbar area.
SSS1052
Seat lifter (if so equipped):
1. Pull up or push down the adjusting switch to
adjust the seat height until the desired
position is achieved.
2. Tilt up or down the adjusting switch to adjust
the front angle of the seat until the desired
position is achieved (for driver’s seat).
If so equipped for driver’s seat
Safety — Seats, seat belts and supplemental restraint system 1-5
SSS1053
SSS1176
SSS1158
USAGE” later in this section.) Also, the seatback
can be reclined to allow occupants to rest when
the vehicle is stopped and the transmission in
the P (Park) position.
2ND ROW SEATS
Seat adjustment
WARNING
. The 2nd row seats are heavy. Be
careful when folding and unfolding.
. To avoid injury to y ourself and
others, keep hands and body clear
when folding.
Forward and backward:
Pull the lever
the seat forward or backward to the desired
position. Release the lever to lock the seat in
position.
Reclining:
To recline the seatback, pull the lever
lean back. To bring the seatback forward, pull
the lever up and lean your body forward. Release
the lever to lock the seatback in position.
The reclining feature allows adjustment of the
seatback for occupants of different sizes for
added comfort and to help obtain proper seat
belt fit. (See “PRECAUTIONS ON SEAT BELT
*
1
1-6 Safety — Seats, seat belts and supplemental restraint system
up and hold it while you slide
2
up and
*
SSS1159
Entry to the 3rd row seat
The 2nd row seats can tilt and slide forward for
easy entry/exit to/from the 3rd row seats.
To enter or exit the 3rd row seat, pull up the lever
1
2
or
*
the seat forward.
Return and lock the 2nd row seats by sliding the
seats to the rearmost position and tilting up the
seatback after use.
to tilt down the seatback and slide
*
SSS1149
3RD ROW SEATS
Reclining
Pull the strap on the seatback
back. Release the strap at the desired angle.
The reclining feature allows adjustment of the
seatback for occupants of different sizes to help
obtain proper seat belt fit. (See “PRECAUTIONS ON SEAT BELT USAGE” later in this
section.) The seatback may also be reclined to
allow occupants to rest when the vehicle is
parked.
A
*
and lean
WARNING
. After adjustment, check to be sure
the seat is securely locked.
. Do not ride in a moving vehicle
when the seatback is reclined. This
can be dangerous. The shoulder belt
will not be against your body. In an
accident, you could be thrown into it
and receive neck or other serious
injuries. You could also slide under
the lap belt and receive serious
internal injuries.
. For the most effective protection
when the vehicle is in motion, the
seat should be upright. Always sit
well back in the seat with both feet
on the floor and adjust the seat belt
properly. See “PRECAUTIONS ON
SEAT BELT USAGE” later in this
section.
Safety — Seats, seat belts and supplemental restraint system 1-7
HEAD RESTRAINTS
WARNING
Head restraints supplement the other
vehicle safety systems. They may provide additional protection against injury
in certain rear end collisions. Adjust the
head restraints properly, as specified in
this section. Check the adjustment after
someone else uses the seat. Do not
attach anything to the head restraint
stalks or remove the head restraint. Do
not use the seat if the head restraint
has been removed. If the head restraint
was removed, reinstall and properly
adjust the head restrain t before an
occupant uses the seating position.
Failure to follow these instructions
can reduce the effectiveness of the
head restraints. This may increase the
risk of serious injury or death in a
collision.
SSS1160
The illustration shows the seating positions
equipped with head restraints. The head restraints are adjustable.
Indicates the seating position is equipped
with a head restraint.
SSS0992
Components
1. Head restraint
2. Adjustment notches
3. Lock knob
4. Stalks
1-8 Safety — Seats, seat belts and supplemental restraint system
SSS0997
Adjustment
Adjust the head restraint so the center is level
with the center of your ears.
To raise the head restraint, pull it up.
Safety — Seats, seat belts and supplemental restraint system 1-9
SSS0993
SSS0994
To lower, push and hold the lock knob and push
the head restraint down.
SSS0995
Removal
Use the following procedure to remove the
adjustable head restraints.
1. Pull the head restraint up to the highest
position.
2. Push and hold the lock knob.
3. Remove the head restraint from the seat.
4. Store the head restraint properly in a secure
place so it is not loose in the vehicle.
5. Reinstall and properly adjust the head
restraint before an occupant uses the
seating position.
Install
1. Align the head restraint stalks with the holes
in the seat. Make sure that the head restraint
is facing the correct direction. The stalk with
the adjustment notches
stalled in the hole with the lock knob
2. Push and hold the lock knob and push the
head restraint down.
3. Properly adjust the head restraint before an
occupant uses the seating position.
1-10 Safety — Seats, seat belts and supplemental restraint system
1
must be in-
*
SSS0996
2
*
Front-seat Active Head Restraint
The Active Head Restraint moves forward
utilizing the force that the seatback receives
from the occupant in a rear-end collision. The
movement of the head restraint helps support
.
the occupant’s head by reducing its backward
movement and helping absorb some of the
forces that may lead to whiplash-type injuries.
Active Head Restraints are effective for collisions at low to medium speeds in which it is said
that whiplash injury occurs most.
Active Head Restraints operate only in certain
rear-end collisions. After the collision, the head
restraints return to their original position.
SSS0508
Loading...
+ 447 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.