Native Instruments DDJ-T1, DDJ-PRO User Manual
En
1
Pioneer DDJ-T1
[For Mac] Upgrading from TRAKTOR T1 EDITION to TRAKTOR PRO
! A connection to the Internet is required to perform the procedure below.
! TRAKTOR is a registered trademark of Native Instruments.
Launch TRAKTOR T1 EDITION.
1.
From the TRAKTOR Help menu, select [Upgrade].
2.
TRAKTOR quits, then Service Center launches.
Input your e-mail address and password to log in.
3.
When "All the selected products have been activated." is
5.
displayed, activation is completed.
Input the TRAKTOR PRO/SCRATCH PRO serial number, then
4.
click the activate button.
En
2
[Reference] Flow for launching TRAKTOR PRO the first time
When TRAKTOR PRO is launched the first time, the Setup
1.
Wizard opens.
USB controller is correct, so select [Yes].
2.
Select [Pioneer] and [DDJ-T1].
3.
NOTE:
The preferences are reset after upgrading.
Note that the audio settings below are required at a minimum in order to use the DDJ-T1.
Audio Setup
(1)
! Audio Device : PIONEER DDJ-T1
Output Routing
(2)
! Mixing Mode : Internal
! Output Monitor :
L 3: DDJ-T1 PHONES L
R 4: DDJ-T1 PHONES R
! Output Master :
L 1: DDJ-T1 MASTER L
R 2: DDJ-T1 MASTER R
If not using the NI audio interface, select [No].
4.
This completes the initial setup.
5.
Input Routing
(3)
Below are the initial settings of TRAKTOR PIONEER DDJ-T1 EDITION.
*
If you were using the external inputs with the initial settings, please make the
settings below.
These settings are not required if you will not be using the external inputs.
! Input Channel D :
L 1: DDJ-T1 AUX/MIC L
R 2: DDJ-T1 AUX/MIC R
Loading...