How it Works
show menu
Mustek
Loading...
POWERMUST 1060
User Manual
45 pgs4.06 Mb0

Mustek POWERMUST 1060, POWERMUST 1590, POWERMUST 1008 ONLINE LCD, POWERMUST 10800 ONLINE LCD, POWERMUST 1188S NETGUARD User Manual

...
0 (0)
ViewPower
User’s Manual
Management Software for Uninterruptible Power Supply Systems
Table of Contents
1. ViewPower Overview .............................................................................................. 2
1.1. Introduction .............................................................................................................................. 2
1.2. Structure ..................................................................................................................................... 2
1.3. Applications .............................................................................................................................. 2
1.4. Features ...................................................................................................................................... 3
2. ViewPower Install, Quick Start, and Uninstall ........................................ 3
2.1. System Requirement ........................................................................................................... 3
2.2. Software Install ...................................................................................................................... 4
2.3. Software Quick Start ........................................................................................................... 7
2.4. Software Uninstall ................................................................................................................ 8
3. ViewPower GUI Interface .................................................................................... 8
3.1. Refresh ......................................................................................................................................... 9
3.2. UPS Searching ....................................................................................................................... 10
3.3. UPS Navigation ..................................................................................................................... 11
3.3.1.Monitored UPS Information .................................................................................. 11
3.3.2.UPS Remote Control & Monitor .......................................................................... 12
4. ViewPower Function Menu ................................................................................ 14
4.1. ViewPower Configuration ............................................................................................... 14
4.1.1.Password Configuration ......................................................................................... 14
4.1.2.SMS Configuration ...................................................................................................... 15
4.1.3.E-mail Configuration ................................................................................................. 17
4.1.4.Event Action Configuration ................................................................................... 19
4.1.5.Wake on LAN ................................................................................................................. 20
4.1.6. Com.Port Plug And Play Setting ......................................................................... 21
4.1.7.Log Setting...................................................................................................................... 22
4.1.8.ModBus Communication Setting ........................................................................ 23
4.1.9.Certificates management ....................................................................................... 24
4.2. UPS Setting ............................................................................................................................. 25
4.2.1.Local Shutdown ........................................................................................................... 25
4.2.2.Remote Shutdown ...................................................................................................... 27
4.2.3.Parameter Setting ...................................................................................................... 28
4.2.4.Purchasing Information .......................................................................................... 31
4.3. Control ....................................................................................................................................... 31
4.3.1.Real-time Control ........................................................................................................ 31
4.3.2.Scheduled On/Off ....................................................................................................... 33
4.3.3.Scheduled Battery Self-Test ................................................................................. 34
4.4. View ............................................................................................................................................. 35
4.4.1.Status ................................................................................................................................. 35
4.4.2.History ............................................................................................................................... 37
4.5. Format ........................................................................................................................................ 42
4.6. Language .................................................................................................................................. 43
4.7. Help .............................................................................................................................................. 43
Appendix A: Glossary .......................................................................................................... 44
1
1. ViewPower Overview
1.1. Introduction
ViewPower is UPS management software which is perfect for home users and enterprises. It can monitor and mange from one to multiple UPSs in a networked environment, either LAN or INTERNET. It can not only prevent data loss from power outage and safely shutdown systems, but also store programming data and scheduled shutdown UPSs.
1.2. Structure
ViewPower includes ViewPower service, GUI (user interface) and ViewPower icon. ViewPower service is the core of ViewPower software. It’ s a system program running in the back end. It will communicate with UPS, record event, notify users with events, and execute command according to users’ request. GUI is operated in Browser and communicated with back-end program. Users can monitor UPSs for real-time status, information and modify UPS setting parameters via GUI. ViewPower icon is managing tool for ViewPower software. When Vi ewPower is activated, there is an orange plug icon located in taskbar. It also will display pop-up dialog for current UPS status.
NOTE1: Tray icon only exists under Windows OS. NOTE2: Supported browser: Internet Explorer, Mozilla, Firefox, Netscape Navigator, Google chrome, Safari, Opera, Avant Browser, Deepnet Explorer.
1.3. Applications
z Monitor and manage the local UPS connected to local computer z Monitor and manage other UPSs (with software installed) in LAN z Remote monitor and manage other UPSs via INTERNET from remote PC (wit h
software installed)
2
1.4. Features
z Allows control and monitoring of multiple UPSs via LAN and INTERNET z Real-time dynamic graphs of UPS data (voltage, frequency, load level, battery
capacity)
z Safely OS shutdown and protection from data loss during power failure z Warning notifications via audible alarm, pop-up screen, broadcast, mobile
messenger, and e-mail
z Scheduled UPS on/off, battery test, programmable outlet control, and audible
alarm control
z Password security protection and remote access management
2. ViewPower Install, Quick Start, and Uninstall
2.1. System Requirement
z 256 MB physical memory at least (512 MB is recommended) z 200MB hard disk space at least z Administrator authority is required z More than 16-bit colors and 800 x 600 or above resolution display is
recommended
z TCP/IP protocol must be installed for network management z An available communication port (RS232 serial port or USB port) is needed z Platforms supported by software are listed below:
¾ Windows 2000 ¾ Windows 2003 ¾ Windows XP ¾ Windows VISTA ¾ Windows 2008(32-bit & x64-bit) ¾ Windows 7(32-bit & x64-bit) ¾ RedHat Linux 8 and above ¾ RedHat Enterprise AS3 and above
3
¾ Suse Linux 10 and above ¾ Ubuntu 6.10 and above ¾ Fedora 5 and above ¾ Linux Server: RedHat Enterprise Linux AS5, SUSE Linux 10 ¾ Linux Desktop: Ubuntu Linux 8.10 ¾ MacOSX 10.1,10.2,10.3, 10.4, 10.5,10.6 ¾ MacOS 8, 9 ¾ Solaris 8、9、10
2.2. Software Install
Step 1 Insert the software CD into CD ROM. will display the installation menu, or you
can run autorun.exe to start the installation in CD directory. Refer to the diagram 2-1.
Diagram 2-1
Step 2 PC will show the following screen as Diagram 2-2. Then Click “install” button to
start the installation.
Diagram 2-2
Step 1 After clicking install, it will display the installation in process. Refer to the
diagram 2-3.
4
Diagram 2-3
Step 2 Choose wanted language and click “OK” as diagram 2-4.
Diagram 2-4
Step 3 Click “Next” to proceed to the next screen as Diagram 2-5.
5
Diagram 2-5
Step 4 Click “Choose” button to change the default folder. After choosing the installed
folder, click “Next” button. Refer to the following diagram 2-6.
Diagram 2-6
Step 5 Choose the shortcut folder and click “Next” button. Refer to the following
diagram 2-7.
Diagram 2-7
Step 6 It will display the software summary before installation. Click “Install” button to
start the installation and refer to Diagram 2-8.
6
Diagram 2-8
Step 7 Click “Done” button to confirm the installation completely.
Refer to Diagram 2-9.
Diagram 2-9
2.3. Software Quick Start
The Installer will leave a shortcut icon on your desktop. Simply click the shortcut. Then it will start the software and display an orange plug icon located in taskbar . T o launch the
7
GUI, double click the plug icon or choose “open” by clicking right button of the mouse. Refer to below diagram. Or, use the Start Menu method; Start >> All Programs >> Viewpower >> Viewpower
Shortcut icon ViewPower icon
NOTE: After software is installed successfully, it will pop up a plug icon in the tray. If
there is an “X” on the icon, the software service is not activated. Under service inactive situation, if log into windows OS, the software will run normally. If log out windows OS, the software can’t be operated.
2.4. Software Uninstall
Note: Before uninstall software, you must stop all software programs first and then log
in as “Administrator”! Otherwise it can't be uninstalled completely. Please choose Start >> All Programs >> Viewpower >> Uninstall. Then follow the on-screen instruction to uninstall the software.
3. ViewPower GUI Interface
The GUI has five sections as marked in the illustration below:
8
Diagram 3-1
A. Function Menu offers complete tool-set for navigating and setting the GUI. B. Shortcut Menu provides short cuts to more commonly used functions. C. Current Monitoring Information displays user ID and monitored UPS name. D. UPS Navigation indicates all UPS locations in networked environment. E. Main Window contains information and/or controls that change with each function
menu or shortcut menu selected.
3.1. Refresh
Click the Refresh icon to refresh screen (Refer to Diagram 3-2).
9
Diagram 3-2
3.2. UPS Searching
Step 1 Click the UPS Searching icon to search UPS devices in LAN or INTERNET.
Step 2 Click the UPS search icon
(Refer to Diagram 3-3).
10
Diagram 3-3
Step 3 Select LAN band for LAN search or enter IP address for INTERNET search.
Step 4 Click “search” button and the system will start search UPSs. All UPSs found
in LAN or INTERNET will be listed in UPS Navigation section.
3.3. UPS Navigation
It displays all UPSs found through UPS searching function. CURRENT means currently connected PC and UPS device LAN means connected PCs and UPS devices in local area network INTERNET means connected PCs and UPS devices in wide area network
NOTE: The definition of LAN and INTERNET depends on the local PC location.
3.3.1. Monitored UPS Information
Select one UPS from UPS navigation and it will display complete UPS informa tion in main window. Refer to Diagram 3-4.
z UPS rated information includes rated VA, rated output voltage, rated output
frequency, rated output current, and rated battery voltage.
11
z Battery information includes battery group numbers. z Purchasing information means UPS purchasing date, battery purchasing date,
warranty for UPS, and warranty for battery.
Diagram 3-4
NOTE: This display screen may be different for different types of UPS.
3.3.2. UPS Remote Control & Monitor
If you want to control and set up the remote UPS, you must log in as an administrator. There are two ways to remote monitor UPS: ¾ Method one: Double click any UPS from UPS navigation and it will pop up a message
window to confirm the monitoring action. Refer to below diagram 3-5.
12
Diagram 3-5 Select “Yes” and it will open another new window to display remote UPS information. Refer to Diagram 3-6.
Diagram 3-6
NOTE: This display screen may be different for different types of UPS.
13
Loading...
+ 31 hidden pages
Privacy Policy Cookie Policy Terms of Use