MSI Z77A-GD65 User Manual

Z77A-GD65 GAMING series

MS-7751 (v5.x) Motherboard

G52-77511XS

Preface

Copyright Notice

The material in this document is the intellectual property of MICRO-STAR INTERNA - TIONAL. We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. Our products are under continual improvement and we reserve the right to make changes without notice.

Trademarks

All trademarks in this manual are properties of their respective owners.

MSI® is registered trademark of Micro-Star Int’l Co.,Ltd.

NVIDIA® is registered trademark of NVIDIA Corporation.

ATI® is registered trademark of AMD Corporation.

AMD® is registered trademarks of AMD Corporation.

Intel® is registered trademarks of Intel Corporation.

Windows® is registered trademarks of Microsoft Corporation.

AMI® is registered trademark of American Megatrends Inc.

Award® is a registered trademark of Phoenix Technologies Ltd.

Sound Blaster® is registered trademark of Creative Technology Ltd.

Realtek® is registered trademark of Realtek Semiconductor Corporation.

JMicron® is registered trademark of JMicron Technology Corporation.

Netware® is registered trademark of Novell, Inc.

Lucid® is trademark of LucidLogix Technologies, Ltd.

VIA® is registered trademark of VIA Technologies, Inc.

ASMedia® is registered trademark of ASMedia Technology Inc.

iPad, iPhone, and iPod are trademarks of Apple Inc.

Qualcomm Atheros and Killer are trademarks of Qualcomm Atheros Inc.

Revision	History
Revision	Revision History	Date
V5.0	First release	2013/02

ii

MS-7751

Technical Support

If a problem arises with your system and no solution can be obtained from the user’s manual, please contact your place of purchase or local distributor. Alternatively, please try the following help resources for further guidance.

Visit the MSI website for technical guide, BIOS updates, driver updates, and other information:

http://www.msi.com/service/download/

Contact our technical staff at:

http://support.msi.com

Safety Instructions

Always read the safety instructions carefully.

Keep this User’s Manual for future reference.

Keep this equipment away from humidity.

Lay this equipment on a reliable flat surface before setting it up.

The openings on the enclosure are for air convection hence protects the equipment from overheating. DO NOT COVER THE OPENINGS.

Make sure the voltage of the power source is at 110/220V before connecting the equipment to the power inlet.

Place the power cord such a way that people can not step on it. Do not place anything over the power cord.

Always Unplug the Power Cord before inserting any add-on card or module.

All cautions and warnings on the equipment should be noted.

Never pour any liquid into the opening that can cause damage or cause electrical shock.

If any of the following situations arises, get the equipment checked by service personnel:

The power cord or plug is damaged.

Liquid has penetrated into the equipment.

The equipment has been exposed to moisture.

The equipment does not work well or you can not get it work according to User’s Manual.

The equipment has been dropped and damaged.

The equipment has obvious sign of breakage.

DONOTLEAVETHISEQUIPMENTINANENVIRONMENTABOVE60oC(140oF), IT MAY DAMAGE THE EQUIPMENT.

Preface

iii

Preface

FCC -B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digi-

tal device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter-

ference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the measures listed below.

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/television technician for help.

Notice 1

The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Notice 2

Shielded interface cables and A.C. power cord, if any, must be used in order to comply with the emission limits.

VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU.

Micro-Star International

MS-7751

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1)this device may not cause harmful interference, and

2)this device must accept any interference received, including interference that may cause undesired operation.

iv

MS-7751

Battery Information

European Union:

Batteries, battery packs, and accumulators should not be disposed of as unsorted household waste. Please use the public collection system to return, recycle, or treat them in compliance with the local regulations.

Taiwan:

For better environmental protection, waste batteries should be collected separately for recycling or special disposal.

California, USA:

The button cell battery may contain perchlorate material and requires special handling when recycled or disposed of in California.

For further information please visit: http://www.dtsc.ca.gov/hazardouswaste/perchlorate/

CAUTION: There is a risk of explosion, if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the manufacturer.

Preface

Chemical Substances Information

In compliance with chemical substances regulations, such as the EU REACH Regulation (Regulation EC No. 1907/2006 of the European Parliament and the Council), MSI provides the information of chemical substances in products at:

http://www.msi.com/html/popup/csr/evmtprtt_pcm.html

BSMI EMI

:

使用者會被要求採取某些適當的對策。

Preface

WEEE (Waste Electrical and Electronic Equipment) Statement

ENGLISH

To protect the global environment and as an environmentalist, MSI must re-

mind you that...

Under the European Union (“EU”) Directive on Waste Electrical and Electron-

ic Equipment, Directive 2002/96/EC, which takes effect on August 13, 2005, products of “electrical and electronic equipment” cannot be discarded as municipal wastes anymore, and manufacturers of covered electronic equipment

will be obligated to take back such products at the end of their useful life. MSI will comply with the product take back requirements at the end of life of MSI-branded products that are sold into the EU. You can return these products to local collection points.

DEUTSCH

Hinweis von MSI zur Erhaltung und Schutz unserer Umwelt

Gemäß der Richtlinie 2002/96/EG über Elektround Elektronik-Altgeräte dürfen Elektro- und Elektronik-Altgeräte nicht mehr als kommunale Abfälle entsorgt werden. MSI hat europaweit verschiedene Sammelund Recyclingunternehmen beauftragt, die in die Europäische Union in Verkehr gebrachten Produkte, am Ende seines Lebenszyklus zurückzunehmen. Bitte entsorgen Sie dieses Produkt zum gegebenen Zeitpunkt ausschliesslich an einer lokalen Altgerätesammelstelle in Ihrer Nähe.

FRANÇAIS

En tant qu’écologiste et afin de protéger l’environnement, MSI tient à rappeler ceci...

Au sujet de la directive européenne (EU) relative aux déchets des équipement électriques et électroniques, directive 2002/96/EC, prenant effet le 13 août 2005, que les produits électriques et électroniques ne peuvent être déposés dans les décharges ou tout simplement mis à la poubelle. Les fabricants de ces équipements seront obligés de récupérer certains produits en fin de vie. MSI prendra en compte cette exigence relative au retour des produits en fin de vie au sein de la communauté européenne. Par conséquent vous pouvez retourner localement ces matériels dans les points de collecte.

РУССКИЙ

Компания MSI предпринимает активные действия по защите окружающей среды, поэтому напоминаем вам, что....

В соответствии с директивой Европейского Союза (ЕС) по предотвращению загрязнения окружающей среды использованным электрическим и электронным оборудованием (директива WEEE 2002/96/EC), вступающей в силу 13

августа 2005 года, изделия, относящиеся к электрическому и электронному оборудованию, не могут рассматриваться как бытовой мусор, поэтому производители вышеперечисленного электронного оборудования обязаны принимать его для переработки по окончании срока службы. MSI обязуется соблюдать требования по приему продукции, проданной под маркой MSI на территории EC, в переработку по окончании срока службы. Вы можете вернуть эти изделия в специализированные пункты приема.

vi

MS-7751

ESPAÑOL

MSI como empresa comprometida con la protección del medio ambiente, recomienda:

Bajo la directiva 2002/96/EC de la Unión Europea en materia de desechos y/o equipos electrónicos, con fecha de rigor desde el 13 de agosto de 2005, los productos clasificados como “eléctricos y equipos electrónicos” no pueden ser depositados en los contenedores habituales de su municipio, los fabricantes de equipos electrónicos, están obligados a hacerse cargo de dichos productos al termino de su período de vida. MSI estará comprometido con los términos de recogida de sus productos vendidos en la Unión Europea al final de su periodo de vida. Usted debe depositar estos productos en el punto limpio establecido por el ayuntamiento de su localidad o entregar a una empresa autorizada para la recogida de estos residuos.

NEDERLANDS

Om het milieu te beschermen, wil MSI u eraan herinneren dat….

De richtlijn van de Europese Unie (EU) met betrekking tot Vervuiling van Electrische en Electronische producten (2002/96/EC), die op 13 Augustus 2005 in zal gaan kunnen niet meer beschouwd worden als vervuiling. Fabrikanten van dit soort producten worden verplicht om producten retour te nemen aan het eind van hun levenscyclus. MSI zal overeenkomstig de richtlijn handelen voor de producten die de merknaam MSI dragen en verkocht zijn in de EU. Deze goederen kunnen geretourneerd worden op lokale inzamelingspunten.

SRPSKI

Da bi zaštitili prirodnu sredinu, i kao preduzeće koje vodi računa o okolini i prirodnoj sredini, MSI mora da vas podesti da…

Po Direktivi Evropske unije (“EU”) o odbačenoj ekektronskoj i električnoj opremi, Direktiva 2002/96/EC, koja stupa na snagu od 13. Avgusta 2005, proizvodi koji spadaju pod “elektronsku i električnu opremu” ne mogu više biti odbačeni kao običan otpad i proizvođači ove opreme biće prinuđeni da uzmu natrag ove proizvode na kraju njihovog uobičajenog veka trajanja. MSI će poštovati zahtev o preuzimanju ovakvih proizvoda kojima je istekao vek trajanja, koji imaju MSI oznaku i koji su prodati u EU. Ove proizvode možete vratiti na lokalnim mestima za prikupljanje.

POLSKI

Aby chronić nasze środowisko naturalne oraz jako firma dbająca o ekologię, MSI przypomina, że...

Zgodnie z Dyrektywą Unii Europejskiej (“UE”) dotyczącą odpadów produktów elektrycznych i elektronicznych (Dyrektywa 2002/96/EC), która wchodzi w życie 13 sierpnia 2005, tzw. “produkty oraz wyposażenie elektryczne i elektroniczne “ nie mogą być traktowane jako śmieci komunalne, tak więc producenci tych produktów będą zobowiązani do odbierania ich w momencie gdy produkt jest wycofywany z użycia. MSI wypełni wymagania UE, przyjmując produkty (sprzedawane na terenie Unii Europejskiej) wycofywane z użycia. Produkty MSI będzie można zwracać w wyznaczonych punktach zbiorczych.

Preface

vii

Preface

TÜRKÇE

Çevreci özelliğiyle bilinen MSI dünyada çevreyi korumak için hatırlatır:

Avrupa Birliği (AB) Kararnamesi Elektrik ve Elektronik Malzeme Atığı, 2002/96/EC Kararnamesi altında 13 Ağustos 2005 tarihinden itibaren geçerli olmak üzere, elektrikli ve elektronik malzemeler diğer atıklar gibi çöpe atılamayacak ve bu elektonik cihazların üreticileri, cihazların kullanım süreleri bittikten sonra ürünleri geri toplamakla yükümlü olacaktır. Avrupa Birliği’ne satılan MSI markalı ürünlerin kullanım süreleri bittiğinde MSI ürünlerin geri alınması isteği ile işbirliği içerisinde olacaktır. Ürünlerinizi yerel toplama noktalarına bırakabilirsiniz.

ČESKY

Záleží nám na ochraně životního prostředí - společnost MSI upozorňuje...

Podle směrnice Evropské unie (“EU”) o likvidaci elektrických a elektronických výrobků 2002/96/EC platné od 13. srpna 2005 je zakázáno likvidovat “elektrické a elektronické výrobky” v běžném komunálním odpadu a výrobci elektronických výrobků, na které se tato směrnice vztahuje, budou povinni odebírat takové výrobky zpět po skončení jejich životnosti. Společnost MSI splní požadavky na odebírání výrobků značky MSI, prodávaných v zemích EU, po skončení jejich životnosti. Tyto výrobky můžete odevzdat v místních sběrnách.

MAGYAR

Annak érdekében, hogy környezetünket megvédjük, illetve környezetvédőként fellépve az MSI emlékezteti Önt, hogy ...

Az Európai Unió („EU”) 2005. augusztus 13-án hatályba lépő, az elektromos és elektronikus berendezések hulladékairól szóló 2002/96/EK irányelve szerint az elektromos és elektronikus berendezések többé nem kezelhetőek lakossági hulladékként, és az ilyen elektronikus berendezések gyártói kötelessé válnak az ilyen termékek visszavételére azok hasznos élettartama végén. Az MSI betartja a termékvisszavétellel kapcsolatos követelményeket az MSI márkanév alatt az EU-n belül értékesített termékek esetében, azok élettartamának végén. Az ilyen termékeket a legközelebbi gyűjtőhelyre viheti.

ITALIANO

Per proteggere l’ambiente, MSI, da sempre amica della natura, ti ricorda che….

In base alla Direttiva dell’Unione Europea (EU) sullo Smaltimento dei Materiali Elettrici ed Elettronici, Direttiva 2002/96/EC in vigore dal 13 Agosto 2005, prodotti appartenenti alla categoria dei Materiali Elettrici ed Elettronici non possono più essere eliminati come rifiuti municipali: i produttori di detti materiali saranno obbligati a ritirare ogni prodotto alla fine del suo ciclo di vita. MSI si adeguerà a tale Direttiva ritirando tutti i prodotti marchiati MSI che sono stati venduti all’interno dell’Unione Europea alla fine del loro ciclo di vita. È possibile portare i prodotti nel più vicino punto di raccolta

viii

MS-7751

Contents

Copyright	Notice	ii
Trademarks		ii
Revision	History	ii
Technical	Support	iii
Safety Instructions		iii
FCC-B Radio Frequency Interference Statement		iv
Battery Information		v
Chemical Substances Information		v
BSMI EMI		v
WEEE (Waste Electrical and Electronic Equipment) Statement		vi
Chapter 1 Getting Started		1-1

Packing Contents 1-2 Optional Accessories 1-2 Assembly Precautions 1-3 Motherboard Specifications 1-4 Connectors Quick Guide 1-6 Back Panel Quick Guide 1-8 CPU (Central Processing Unit) 1-10 Mounting Screw Holes 1-14 Power Supply 1-15 Memory 1-16 Expansion Slots 1-18 Video/ Graphics Cards 1-19 Internal Connectors 1-24 Buttons 1-32 Jumpers 1-34 Switch 1-35 LED Status Indicators 1-36

Chapter 2 BIOS Setup 2-1

Entering 2-2 Overview 2-2 Boot device priority bar 2-3 Operation 2-4 SETTINGS 2-5 OC 2-10 ECO 2-17

ix

Preface

Preface

BROWSER 2-18 Installing Winki 2-18 UTILITIES 2-19 Updating the BIOS with Live Update 2-21 SECURITY 2-22

Appendix A Realtek Audio A-1

Installing the Realtek HD Audio Driver A-2 Software Configuration A-3 Hardware Default Setting A-5

Appendix B Intel RAID B-1

Introduction B-2 Using Intel Rapid Storage Technology Option ROM B-3 Installing Driver B-10 Degraded RAID Array B-12 System Acceleration (optional) B-14 RST Synchronization (optional) B-16

Appendix C Install Windows XP Notes C-1

Installing Windows XP with IDE Mode C-2 Installing Windows XP with AHCI Mode C-3

Chapter1

Getting Started

Thank you for choosing the Z77A-GD65 GAMING Series (MS-7751 v5.X) ATX motherboard. The Series motherboards are based on Intel® Z77 chipset for optimal system efficiency. Designed to fit the advanced Intel® LGA1155 processor, the Z77A-GD65 GAMING Series motherboards deliver a high performance and professional desktop platform solution.

Getting Started

Packing Contents

	Motherboard	Drivers &	User Guide	Backplate
		Utilities Disc

SATA Cable

Optional Accessories

USB 2.0	USB 3.0	eSATA Power	eSATA
Bracket	Bracket	Cable	Bracket

M-Connector	USB3 to USB2	SATA Power	CrossFire
	Connector	Cable	Cable

MSI

SLI Cable MultiConnect

Panel

*These pictures are for reference only and may vary without notice.

*The packing contents may vary according to the model you purchased.

*If you need to purchase the optional accessories or request part numbers, please visit the MSI website at http://www.msi.com/index.php or consult the dealer.

1-2

MS-7751

Assembly Precautions

■ The components included in this package are prone to damage from electrostatic
discharge (ESD). Please adhere to the following instructions to ensure successful
computer assembly.
■ Always turn off the power supply and unplug the power cord from the power outlet
before installing or removing any computer component.	Chapter
■ Ensure that all components are securely connected. Loose connections may cause
the motherboard to prevent electrostatic damage. If an ESD wrist strap is not avail-
the computer to not recognize a component or fail to start.
■ Hold the motherboard by the edges to avoid touching sensitive components.
■ It is recommended to wear an electrostatic discharge (ESD) wrist strap when handling
able, discharge yourself of static electricity by touching another metal object before	1
handling the motherboard.
■ Store the motherboard in an electrostatic shielding container or on an antistatic pad
whenever the motherboard is not installed.
■ Before turning on the computer, ensure that there are no loose screws or metal com-
ponents on the motherboard or anywhere within the computer case.
■ Do not use the computer in a high-temperature environment.
■ Do not boot the computer before installation is completed. This could cause perma-
nent damage to the components as well as injury to the user.
■ If you need help during any installation step, please consult a certified computer tech-
nician.

Important

A screwdriver (not included) may be required for computer assembly.

1-3

Getting Started

Motherboard Specifications

Processor Support

■3rdGenerationIntel® Core™i7/Core™i5/Core™i3/Pentium® /Celeron®processors in an LGA 1155 socket

Chipset

■ Intel® Z77 chipset

Memory Support

■4x DDR3 DIMMs support for DDR3-1066/ 1333/ 1600/ 1866/ 2000/ 2133(OC)/ 2200/ 2400/ 2600/ 2667/ 2800 (OC, 22nm CPU required) MHz up to 32GB max

■Supports Dual-Channel mode

LAN

■Supports LAN 10/100/1000 Fast Ethernet by Killer® E2205 Gigabit*

-*The Killer Network Manager is only available for Windows 7 and Windows 8 currently. The supported drivers for other operating systems would be available on the website if provided by vendor.

Audio

■Integrated HD audio codec by Realtek® ALC898

■Supports Sound Blaster Cinema

SATA

■4x SATA 6Gb/s ports

-(SATA1~2) by Intel® Z77

-(SATA7~8) by Asmedia® ASM1061**

-**If you set external SATA 6Gb/s ports to AHCI mode, we highly recommend that you install Windows 7 or Windows 8.

■4x SATA 3Gb/s ports

-(SATA3~6) by Intel® Z77

RAID

■SATA1~6 support Intel® Rapid Storage Technology enterprise (AHCI/ RAID 0/ 1/ 5/ 10) by Intel® Z77

USB 3.0

■2x USB 3.0 rear IO ports by Intel® Z77

■1x USB 3.0 onboard connector by Intel® Z77

Multi-GPU

■Supports ATI® CrossFireTM Technology

■Supports NVIDIA® SLITM Technology

■Supports Lucid® Virtu Universal MVP

Connectors & Buttons

■Back panel

-1x PS/2 keyboard/ mouse port

-1x Clear CMOS button

-1x Coaxial S/PDIF-out port

-1x Optical S/PDIF-out port

1-4

			MS-7751
- 4x		USB 2.0 ports
- 2x		USB 3.0 ports
- 1x		LAN port
-	6x audio ports
-	1x	HDMI® port***, supporting a maximum resolution of 1920x1200
-	1x	DVI-D port***, supporting a maximum resolution of 1920x1200
-	1x	VGA port***, supporting a maximum resolution of 2048x1536
- ***Thisplatformsupportsdual-displayfunctionbyanytwooutputports(HDMI+DVI,				Chapter
- 1x		USB 3.0 connector
	DVI+VGA or VGA+HDMI).
■ On-Board
- 3x		USB 2.0 connectors
- 1x		IEEE 1394 connector		1
-	1x	Multi BIOS Switch
- 1x		TPM Module connector
-	1x	Front Panel Audio connector
-	1x	Chassis Intrusion connector
- 1x		Debug LED panel
-	1x	Voice Genie connector (optional)
-	1x	MultiConnect Panel connector (optional)
-	1x	V-Check Points Set
- 1x		OC Genie button
-	1x	Reset button
-	1x	Power button
Slots
■ 3x PCIe 3.0 x16 slots
		PCIe x16 slots support table
When installing 3rd Gen Intel® Core™ i7/ Core™ i5/			When installing 2nd Gen Intel® Core™ i7/ Core™ i5/
Core™ i3/ Pentium®/ Celeron® processors			Core™ i3/ Pentium®/ Celeron® processors
16/0/0			16/0/X
		16	16
		0	0
		0	no support
8/8/0			8/8/X
		8	8
		8	8
		0	no support
8/4/4		8
		4
		4

■ 4x PCIe 2.0 x1 slots

Form Factor

■ ATX (30.5 cm X 24.5 cm)

Mounting Screw Holes

■ 9x mounting holes

1-5

Getting Started

Connectors Quick Guide
				DIMM4
			DIMM3
			DIMM2
SYSFAN2		DIMM1		SYSFAN3
JPWR2	CPU	CPUFAN		JTURBO1
				OC1
				RESET1
				POWER1
Back				JPWR1
Panel
				FV1
				SYSFAN1
PCI_E1
PCI_E2
PCI_E3				JUSB4
PCI_E4				SATA1_2
JBAT1				SATA3_4
PCI_E5
				SATA5_6
PCI_E6				SATA7_8
PCI_E7
JAUD1		JCI1		JUSB3
				MULTI_BIOS_SWITCH
SYSFAN4	JFP1			JUSB2
JTPM1	JFP2	J1394_1	JUSB1
JDLED3
1-6

MS-7751

Connectors Reference Guide

Port Name	Port Type	Page
Back Panel		1-8
CPU	LGA1155 CPU Socket	1-10
CPUFAN,SYSFAN1~4	Fan Power Connectors	1-25
DIMM1~4	DDR3 Memory Slots	1-16
FV1	Voltage Checkpoints Connector	1-31
J1394_1	IEEE1394 Expansion Connector	1-30
JAUD1	Front Panel Audio Connector	1-26
JBAT1	Clear CMOS Jumper	1-34
JCI1	Chassis Intrusion Connector	1-28
JDLED3	Voice Genie Connector	1-29
JFP1, JFP2	Front Panel Connectors	1-26
JPWR1	ATX 24-pin Power Connector	1-15
JPWR2	ATX 8-pin Power Connector	1-15
JTPM1	TPM Module connector	1-29
JTURBO1	MultiConnect Panel Connector	1-30
JUSB1~3	USB 2.0 Expansion Connectors	1-27
JUSB4	USB 3.0 Expansion Connector	1-28
MULTI BIOS SWITCH	Multi BIOS Switch	1-35
OC1	OC Genie Button	1-32
PCI_E2, 5, 7	PCIe x16 Expansion Slots	1-18
PCI_E1, 3, 4, 6	PCIe x1 Expansion Slots	1-18
POWER1	Power Button	1-33
RESET1	Reset Button	1-33
SATA1~2, 7~8	SATA 6Gb/s Connectors	1-24
SATA3~6	SATA 3Gb/s Connectors	1-24

1 Chapter

1-7

Getting Started

Back Panel Quick Guide

Mouse/Keyboard	Coaxial	USB 2.0 Port	LAN	VGA Port
	S/PDIF-Out
				Line-In RS-Out
				Line-Out CS-Out
				Mic	SS-Out

USB 2.0 Port	Optical	HDMI Port	USB 3.0 Port	DVI-D Port
	S/PDIF-Out

Clear CMOS Button

Mouse/Keyboard

A combination PS/2® mouse/keyboard DIN connector for a PS/2® mouse/keyboard.Clear CMOS Button

There is CMOS RAM present on board that is powered by an external battery to store system configuration data. Using CMOS RAM, the system can automatically boot into the operating system (OS) every time it is turned on. If you wish to clear the system configuration, press the button to clear the data.

Coaxial S/PDIF-Out

This S/PDIF (Sony & Philips Digital Interconnect Format) connector is provided for digital audio transmission to external speakers through an coaxial cable.

Optical S/PDIF-Out

This S/PDIF (Sony & Philips Digital Interconnect Format) connector is provided for digital audio transmission to external speakers through an optical fiber cable.

USB 2.0 Port

The USB 2.0 port is for attaching USB 2.0 devices such as keyboard, mouse, or other USB 2.0-compatible devices.

USB 3.0 Port

USB 3.0 port is backward-compatible with USB 2.0 devices. It supports data transfer rate up to 5 Gbit/s (SuperSpeed).

Important

In order to use USB 3.0 devices, you must connect to a USB 3.0 port. If a USB cable is used, it must be USB 3.0 compliant.

1-8

				MS-7751
LAN			Yellow	Green/ Orange
The standard RJ-45 LAN jack is for connecting to a
Local Area Network (LAN).
LED	Color	LED State	Condition
Left	Yellow	Off	LAN link is not established.
		On(Steady)	LAN link is established.
		On(flashing)	The computer is communicating with another computer on the
			network.
Right	Green	Off	10 Mbits/sec data rate
		On	100 Mbits/sec data rate
	Orange	On	1000 Mbits/sec data rate

HDMI Port

The High-Definition Multimedia Interface (HDMI) is an all-digital audio-video interface that is capable of transmitting uncompressed streams. HDMI supports all types of TV formats, including standard, enhanced, or high-definition video, plus multi-channel digital audio on a single cable.

VGA Port

The DB15-pin female connector is provided for monitor.

DVI-D Port

The DVI-D (Digital Visual InterfaceDigital) connector can be connected to a LCD monitor, or a CRT monitor with an adapter. To connect a monitor, please refer to the monitor’s manual for more information.

Important

This platform supports dual-display function by any two output ports (HDMI+DVI, DVI+VGA or VGA+HDMI).

		HDMI+DVI	DVI+VGA	VGA+HDMI
	Extend mode
	(Extend the desktop to the second monitor)
	Clone mode
	(Two monitors have the same screen)

Audio Ports

These connectors are used for audio devices. The color of the jack refers to the function of the connector.

■Blue-Line in: Used for connecting external audio outputting devices.

■GreenLine out: Used as a connector for speakers or headphone.

■PinkMic: Used as a connector for a microphone.

■Black- RS-Out: Rear surround sound line out in 4/ 5.1/ 7.1 channel mode.

■Orange- CS-Out: Center/ subwoofer line out in 5.1/ 7.1 channel mode.

■Gray- SS-Out: Side surround sound line out in 7.1 channel mode.

1 Chapter

1-9

Getting Started

CPU (Central Processing Unit)

Introduction to the LGA 1155 CPU

The surface of the LGA 1155 CPU has two alignment keys and a yellow triangle to assist in correctly lining up the CPU for motherboard placement. The yellow triangle is the Pin 1 indicator.

Alignment Key	Alignment Key
Yellow triangle is the
Pin 1 indicator

For the latest information about processors, please visit http://www.msi.com/service/cpu-support/

Important

Overheating

Overheating can seriously damage the CPU and motherboard. Always make sure the cooling fans work properly to protect the CPU from overheating. Be sure to apply an even layer of thermal paste (or thermal tape) between the CPU and the heatsink to enhance heat dissipation.

Replacing the CPU

When replacing the CPU, always turn off the system’s power supply and unplug the power supply’s power cord to ensure the safety of the CPU.

Overclocking

This motherboard is designed to support overclocking. Before attempting to overclock, please make sure that all other system components can tolerate overclocking. Any attempt to operate beyond product specifications is not recommend. MSI does not guarantee the damages or risks caused by inadequate operation beyond product specifications.

1-10

MS-7751

CPU & Cooler Installation

When installing a CPU, always remember to install a CPU cooler. A CPU cooler is necessary to prevent overheating and maintain system stability. Follow the steps below to ensure correct CPU and CPU cooler installation. Wrong installation can damage both the CPU and the motherboard.

1. Unhook and lift the loading lever to	2. The	loading	plate	should
the fully open position.	automatically lift up as the loading
	lever is pushed to the fully open
	position. Do not touch any of the
	CPU socket pins.

1 Chapter

3.Line up the CPU to fit the CPU socket. Be sure to hold the CPU by the base with the metal contacts facing downward. The alignment keys on the CPU will line up with the edges of the CPU socket to ensure a correct fit.

4.Close the loading plate and remove the plastic protective cap.

Alignment Key

1-11

Getting Started

5.Inspect the CPU to check if it is properly seated in the socket. Press the loading lever down and lock it under the retention tab.

7.Locate the CPU fan connector on the motherboard.

6.Evenly spread a thin layer of thermal paste (or thermal tape) on the top of the CPU. This will help in heat dissipation and prevent CPU overheating.

8.Place the heatsink on the motherboard with the fan’s wires facing towards the fan connector and the hooks matching the holes on the motherboard.

1-12

MS-7751

9.Push down on the heatsink until the four clips get wedged into the holes on the motherboard. Press the four hooks down to fasten the cooler. As each hook locks into position a click should be heard.

10.Inspect the motherboard to ensure that the clip-ends have been properly locked in place.

Motherboard

Hook

11.Finally, attach the CPU fan cable to the CPU fan connector on the motherboard.

1 Chapter

Important

•Do not touch the CPU socket pins.

•Confirm that the CPU cooler has formed a tight seal with the CPU before booting your syste.

•Whenever the CPU is not installed, always protect the CPU socket pins by covering the socket with the plastic cap.

•Please refer to the documentation in the CPU cooler package for more details about CPU cooler installation.

1-13

Getting Started

Mounting Screw Holes

When installing the motherboard, first install the necessary mounting stands required for an motherboard on the mounting plate in your computer case. If there is an I/O back plate that camengi with the computer case, please replace it with the I/O backplate that came with the motherboard package. The I/O backplate should snap easily into the

computer case without the need for any screws. Align the mounting plate’s mounting
i		toward
stands with the screw holes on the motherboard and secure the motherboard with the
th
screws provided with your computer case. The locations of the screw holes on the
the
motherboard are shown below. For more information, please refer to the manual that
came with the computer case.
holesnei
thewonup
I/O	the
should		I/OThe
rear l
backplate	of
		ports
	the
.		should
		be
	computer
		fac
	They .case

Important

•Install the motherboard on a flat surface free from unnecessary debris.

•To prevent damage to the motherboard, any contact between the motherboard circuitry and the computer case, except for the mounting stands, is prohibited.

•Please make sure there are no loose metal components on the motherboard or within the computer case that may cause a short circuit of the motherboard.

1-14

MS-7751

Power Supply

JPWR1: ATX 24-pin Power Connector

This connector allows you to connect an ATX 24-pin power supply. To connect the ATX 24-pin power supply, align the power supply cable with the connector and firmly press the cable into the connector. If done correctly, the clip on the power cable should be hooked on the motherboard’s power connector.

								12
							11				.
						7	10		. +3.
										+12V
						9 .						3
						8	.
													V
					6 .
				5 .
1			4		. +5
		3 .			Ground
2			. +5													24
		.GroundV
	.					V
. +3				3
+3
				.											23.
				V
		3																.
																			Ground
															. +5					V
															+5
															+5	V	V
													.Ground
												.		-
										13.			-	ON
											+3 12V				#
													3
													V

JPWR2: ATX 8-pin Power Connector

This connector provides 12V power to the CPU.

1 Chapter

			4
			.
		3	Ground
		.
	2	Ground
	.
1	Ground
.
Ground
						8
			5			.
					7	+12V
					.
				6	+12V
				.
				+12V
			.
			+12V

Important

Make sure that all the power cables are securely connected to a proper ATX power sup-

ply to ensure stable operation of the motherboard.

1-15

Getting Started

Memory

These DIMM slots are used for installing memory modules. For more information on compatible components, please visit http://www.msi.com/service/test-report

DDR3

240-pin, 1.5V

48x2=96 pin

72x2=144 pin

Dual-Channel mode Population Rule

In Dual-Channel mode, the memory modules can transmit and receive data with two data bus channels simultaneously. Enabling Dual-Channel mode can enhance system performance. The following illustrations explain the population rules for Dual-Channel mode.

1	DIMM1
	DIMM2
	DIMM3
	DIMM4

2 DIMM1

DIMM2

DIMM3

DIMM4

Installed

Empty

Important

•DDR3 memory modules are not interchangeable with DDR2, and the DDR3 standard is not backward compatible. Always install DDR3 memory modules in DDR3 DIMM slots.

•To ensure system stability, memory modules must be of the same type and density in Dual-Channel mode.

•Due to chipset resource usage, the system will only detect up to 31+ GB of memory (not full 32 GB) when all DIMM slots have 8GB memory modules installed.

1-16

	MS-7751
Installing Memory Modules
1.	Unlock the DIMM slot by pushing the mounting clips to the side. Vertically insert the
	memory module into the DIMM slot. The memory module has an off-center notch on
	the bottom that will only allow it to fit one way into the DIMM slot.
2.	Push the memory module deep into the DIMM slot. The plastic clips at each side
	of the DIMM slot will automatically close when the memory module is properly seat
	and an audible click should be heard.
3.	1Chapter
	Manually check if the memory module has been locked in place by the DIMM slot’s

side clips.

Notch

Volt

For more information on compatible components, please visit

http://www.msi.com/service/test-report/

1-17

Getting Started

Expansion Slots

This motherboard contains numerous ports for expansion cards, such as discrete graphics or audio cards.

PCIe (Peripheral Component Interconnect Express) Slot

The PCIe slot supports the PCIe interface expansion card.

PCIe 3.0 x16 Slot

PCIe 2.0 x1 Slot

Important

When adding or removing expansion cards, always turn off the power supply and unplug the power supply power cable from the power outlet. Read the expansion card’s documentation to check for any necessary additional hardware or software changes.

1-18

MS-7751

Video/ Graphics Cards

Ifavailable,thismotherboardtakesadvantageoftheCPU’sintegrategraphicsprocessor, but discrete video cards can be installed by way of the motherboard’s expansion slots. Addingononeormorediscretevideocardswillsignificantlyboostthesystem’sgraphics performance. For best compatibility, MSI graphics cards are recommended.

Single Video Card Installation

1.Determine what type of expansion slot(s) the video card will use. Locate the expansion slot(s) on the motherboard. Remove any protective expansion slot covers from the computer case.

2.Line up the video card on top of the expansion slot(s) with the display ports facing out of the computer case. For a single video card installation, using the PCI_E2 slot is recommended.

3.Push the video card into its expansion slot(s). Depending on the expansion slot(s) used, there should be clip(s) on the expansion slot(s) that will lock in place.

4.If needed, screw the edge of the graphics card to the computer case. Some video cards might require a power cable directly from the power supply.

5.Please consult your video card’s manual for further instructions regarding driver installation or other special settings.

1 Chapter

1-19

Getting Started

AMD CrossFire™ (Multi-GPU) Technology

AMD CrossFire™ is a multi-GPU performance gaming platform. By linking together two or more discrete GPUs, CrossFire™ can significant improve system graphics performance. It allows the ability to scale a system’s graphics power as needed, making it the most scalable gaming platform. This motherboard will automatically detect CrossFire™ technology and make changes in the BIOS as needed. Follow the instructions below to ensure a successful two-way CrossFire™ installation.

1.Install two AMD Radeon™ HD graphics cards into the PCI_E2 & PCI_E5 expansion slots.

2.With the two cards installed, two CrossFire™ Video Link cable are required to connect the graphics cards. Attach one side of the cable on each of the cards by way of the metal contacts (please refer to the picture below). Please note that although two graphics cards have been installed, only the display ports on the graphics card installed in the first PCIe x16 slot will work. All displays should be connected to this graphics card.

CrossFireTM Video Link cable

Important

•Please ensure that all graphics cards used in CrossFire™ mode are of the same brand and specifications. For best compatibility with the motherboard, MSI graphics cards are recommended.

•Make sure to connect an adequate power supply to the power connectors on the graphics cards to ensure stable operation.

•Only Windows XP with Service Pack 2 (SP2), Windows XP Professional x64 Edition, Windows Vista, Windows 7 & Windows 8 will support CrossFire mode.

1-20