MOTOROLA MC10EP105FA, MC10EP105FAR2 Datasheet
MC10EP105
Product Preview
Quad 2-Input Differential
AND/NAND
The MC10EP105 is a 2–input differential AND/NAND gate. Each
gate is functionally equivalent to a EP05 and LVEL05 devices. With
AC performance much faster than the LVEL05 device, the EP105 is
ideal for applications requiring the fastest AC performance available.
All VCC and VEE pins must be externally connected to power supply to
guarantee proper operation.
• 190ps Typical Propagation Delay
• High Bandwidth to 3 Ghz Typical
• ECL mode: 0V V
• PECL mode: 3.0V to 5.5V V
• Internal Input Pulldown Resistors
• ESD Protection: >2KV HBM, >100V MM
• New Differential Input Common Mode Range
• Moisture Sensitivity Level 2
For Additional Information, See Application Note AND8003/D
• Flammability Rating: UL–94 code V–0 @ 1/8”,
Oxygen Index 28 to 34
• Transistor Count = 444 devices
with VEE = –3.0V to –5.5V
CC
with VEE = 0V
CC
http://onsemi.com
32–LEAD TQFP
FA SUFFIX
CASE 873A
MARKING DIAGRAM*
MC10
EP105
AWLYYWW
32
1
*For additional information, see Application Note
AND8002/D
A = Assembly Location
WL = Wafer Lot
YY = Year
WW = Work Week
D0a
D0a
D0b
D0b
D1a
D1a
D1b
D1b
D2a
D2a
D2b
D2b
D3a
D3a
D3b
D3b
LOGIC DIAGRAM
Q0
Q0
Q1
Q1
Q2
Q2
Q3
Q3
PIN DESCRIPTION
PIN
Dna, Dnb, Dna
Qn, Qn ECL Data Outputs
Dna Dnb Dna Dnb Qn Qn
LLHHLH
LHHLLH
HLLHLH
HHLLHL
Device Package Shipping
MC10EP105FA TQFP 250 Units/Tray
, Dnb
VBB
VCC Positive Supply
VEE Negative, 0 Supply
TRUTH TABLE
ORDERING INFORMATION
FUNCTION
ECL Data Inputs
Reference Voltage Output
This document contains information on a product under development. ON Semiconductor
reserves the right to change or discontinue this product without notice.
Semiconductor Components Industries, LLC, 1999
December, 1999 – Rev. 0
1 Publication Order Number:
MC10EP105FAR2 TQFP 2000 Tape & Reel
MC10EP105/D
D0b
MC10EP105
24 23 22 21 20 19 18 17
25
D2bD2aD2aD1bD1bD1aD0b D1a
16
D2b
D0a
D0a
VEE
26
27
28
15
14
13
D3a
D3a
VCC
MC10EP105
Q0
Q0
VCC
VCC
29
30
31
32
12345678
Q1
Figure 1. 32–Lead TQFP Pinout
(Top View)
Warning: All VCC and VEE pins must be externally connected
to Power Supply to guarantee proper operation.
MAXIMUM RATINGS*
Symbol Parameter Value Unit
V
EE
V
CC
V
I
V
I
I
out
T
A
T
stg
θ
JA
θ
JC
T
sol
* Maximum Ratings are those values beyond which damage to the device may occur.
Power Supply (VCC = 0V) –6.0 to 0 VDC
Power Supply (VEE = 0V) 6.0 to 0 VDC
Input Voltage (VCC = 0V, VI not more negative than VEE) –6.0 to 0 VDC
Input Voltage (VEE = 0V, VI not more positive than VCC) 6.0 to 0 VDC
Output Current Continuous
Surge
Operating Temperature Range –40 to +85 °C
Storage Temperature –65 to +150 °C
Thermal Resistance (Junction–to–Ambient) Still Air
500lfpm
Thermal Resistance (Junction–to–Case) 12 to 17 °C/W
Solder Temperature (<2 to 3 Seconds: 245°C desired) 265 °C
12
11
10
9
VCCQ3Q3Q2Q2Q1VCC
D3b
D3b
VEE
NC
50
100
80
55
mA
°C/W
http://onsemi.com
2
MC10EP105
DC CHARACTERISTICS, ECL/LVECL (VCC = 0V; VEE = –5.5V to –3.0V) (Note 4.)
–40°C 25°C 85°C
Symbol Characteristic Min Typ Max Min Typ Max Min Typ Max Unit
IEE
V
OH
V
OL
V
IH
V
IL
V
IHCMR
I
IH
I
IL
NOTE: 10EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The
1. VCC = 0V, VEE = V
2. All loading with 50 ohms to VCC–2.0 volts.
3. V
4. Input and output parameters vary 1:1 with VCC.
Power Supply Current
(Note 1.)
Output HIGH Voltage
(Note 2.)
Output LOW Voltage
(Note 2.)
Input HIGH Voltage
Single Ended
Input LOW Voltage
Single Ended
Input HIGH Voltage Common Mode
Range (Note 3.)
Input HIGH Current 150 150 150 µA
Input LOW Current D
circuit is in a test socket or mounted on a printed circuit board and transverse airflow greater than 500lfpm is maintained.
min varies 1:1 with VEE, max varies 1:1 with VCC.
IHCMR
EEmin
to V
, all other pins floating.
EEmax
–1135 –1060 –885 –1070 –945 –820 –1010 –885 –760 mV
–1935 –1810 –1685 –1870 –1745 –1620 –1810 –1685 –1560 mV
–1210 –885 –1145 –820 –1085 –760 mV
–1935 –1610 –1870 –1545 –1810 –1485 mV
VEE+2.0 0.0 VEE+2.0 0.0 VEE+2.0 0.0 V
D
0.5
–150
0.5
–150
59 mA
0.5
–150
µA
DC CHARACTERISTICS, LVPECL (VCC = 3.3V ± 0.3V, VEE = 0V) (Note 8.)
–40°C 25°C 85°C
Symbol Characteristic Min Typ Max Min Typ Max Min Typ Max Unit
IEE
V
OH
V
OL
V
IH
V
IL
V
IHCMR
I
IH
I
IL
NOTE: 10EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The
5. VCC = 3.3V, VEE = 0V, all other pins floating.
6. All loading with 50 ohms to VCC–2.0 volts.
7. V
8. Input and output parameters vary 1:1 with VCC.
Power Supply Current
(Note 5.)
Output HIGH Voltage
(Note 6.)
Output LOW Voltage
(Note 6.)
Input HIGH Voltage
Single Ended
Input LOW Voltage
Single Ended
Input HIGH Voltage Common Mode
Range (Note 7.)
Input HIGH Current 150 150 150 µA
Input LOW Current D
circuit is in a test socket or mounted on a printed circuit board and transverse airflow greater than 500lfpm is maintained.
min varies 1:1 with VEE, max varies 1:1 with VCC.
IHCMR
D
2165 2240 2415 2230 2355 2480 2290 2415 2540 mV
1365 1490 1615 1430 1555 1680 1490 1615 1740 mV
2090 2415 2155 2480 2215 2540 mV
1365 1690 1430 1755 1490 1815 mV
2.0 3.3 2.0 3.3 2.0 3.3 V
0.5
–150
0.5
–150
59 mA
0.5
–150
µA
http://onsemi.com
3
Loading...