Specifications and Main Features
- Denomination: ARK-600.
- Structure of the base: simplified with a dustproof feature; structure of base has flanges.
- Force for the test: For pre-tests of F = 98.07 N (10 kgf).
- Force for the test:
- Ranging from F = 588.4 N(60kgf)
- Ranging from F = 980.7N (100kgf)
- Ranging from F = 1471N (150kgf)
For Switching- test forces control: Test force preliminary tests (fixed); Operating with knobs gives test force on rotation of hand knob.
- Load Control: Manual control to load using the required test force, and automatic control test that includes loaders, rotation durations and unloading.
-Controlled Durations:
- 3-5 seconds for automation.
- Manual, if possible as per demand.
- 4 digits hardness displays: LED displays.
- HR value displayable: Minimum to 0.1HR.
- Selected functions: Loading navi hard, scrolling selector judge, offset value.
- Outlined data: SPC interface out RS-232C.
- Maximum height measurement of the samples: -
- When using apron max height: 0-140mm
- When using table aprons max height: 10-150mm
- The max measurement depth of the samples is 112mm ( the shaft centre of the indentor)
- The approximate dimension for measurement of the cabin size: W=210 D=486 H=680.
- The approximate machine mass is 40 kgs.
- Rated power supply: 100 V AC 110%, 50/60 Hz ( 120 V AC, 220 V AC, or 240 V AC applicable if specified)
- Nominal power: 30 VA or lower
Frequently Asked Questions
Q1: What Is The Maximum Height (In mm) If The Specimen Is To Be Tested Using ARK-600?
A: Applied ARK-600 using flat anvil the max height of the specimen is 140 mm, and while using a table the max height of the specimen is 150mm.
Q2: What Maximum Test Forces Has ARK-600 Been Equipped With?
A: The maximum test forces that has been equipped with ARK-600 is 98.07N (10 kgf),588.4N (60 kgf), 980.7N (100 kgf) and preliminary test force of 1471N (150 kgf).
Q3: The Equipment Is Controlled By, Interims Of Load Limits, How Is This Controlled In The Case Of The ARK-600?
A: In ARK-600 the load control ability incorporates a manual control of the primary test force and an automated control of the test force which consists of loading and unloading durations.
Q4: What Do You Mean By The ARK-600 Being Power Efficient According To Its Power Consumption?
A: With regards to power consumption efficiency, ARK-600 consumes 30VA or less which qualifies it as being power efficient machine.
Q5: If You Were To Compare The ARK-600 And Other Similar Models In In Terms Of Display Features, Which One Is Better?
A: The model i.e. 4 digits digital display (LED) with the least value displayable is 0.1 HR although it does not mean ARK-600 does not possess a range of display options.
User Manual
Loading...