Mitsubishi 61S-P623 User Manual
MITSUBISHI MGS SERIES
Overall dimensions
L : Length
mm
5185
H : Height
mm
2645
Total Weight (Wet)
kg
12600
MMGGSS11000000HHVV
60Hz/13.8kV
STAND-BY
1060 kW
DIESEL GENERATOR SET
60Hz/1800 rpm/13.8kV
POWER RATING (0.8 P.F.) MODEL CODE
STAND-BY 1060 kW 61S-P623
MGS1000HV with typical options
CONDITIONS & DEFINITIONS
Stand-by: Code: S
Applicable for supplying emergency power at varying load in the event of normal utility power interruption.
Fuel stop power in accordance with ISO15550, IS O3046/1, JISB8002-1, DIN6271 and BS5514.
Conditions:
Engine ratings are based on SAE J1349 standard conditions and also apply at ISO3046/1, DIN6271 & BS5514 standard
conditions.
Fuel rates: based on A STM D975, BS2869 and on fuel oil of 3 5° API (16°C or 60° F) gravity hav ing a LH V of 4 2, 78 0 kJ /kg
(18,390 Btu/lb.) when used at 29°C (85° F) and weighing 838.9 g/liter (7.001 lbs./U.S. gal.).
DIMENSION (Reference Data)
W : Width mm 2020
Total Weight (Dry) kg 12300
MITSUBISHI MGS SERIES
Bore
mm
150
Stroke
mm
175
Displacement L 37.1
Piston speed
m/sec.
10.5
Compression ratio 14
Lubricating oil capacity L 200
Coolant capacity without radiator
L
100
Coolant pump external resistance
m water
5.0
Coolant pump flow rate
L/min
1450
Cooling fan airflow rate
m3/min
1800
Cooling fan air flow restriction
kPa
0.1
Ambient air temperature
°C
40
Allowable exhaust back pressure
kPa
6.0
Exhaust flange size (internal diameter)
mm
200
Gross Engine Power*
kWm
1136
Brake mean effective pressure
MPa
2.1
Regenerative absorption
kW
108
Noise Level at 1 m
dB(A)
113
(excluding: intake, exhaust & fan)
Fuel consumption load 100%*
L/hr.
290
Fuel consumption load 75%*
L/hr.
214
Combustion air inlet flow rate
m3/min
100
Exhaust gas flow rate
m3/min
262
Exhaust gas temperature
°C
510
Heat rejection to coolant
kW
722
Heat rejection to exhaust
kW
926
Heat rejection to atmosphere from engine
kW
87
Heat rejection to atmosphere from generator
kW
53
STAND-BY
1060 kW
MGS SERIES DIESEL ENGINE: MITSUBISHI S12H-PTA-S
DIESEL GENERATOR SET
MGS1000HV
V-12, 4 stroke-cycle water-cooled, turbocharged and aftercooled
ENGINE SPECIFICATIONS & TECHNICAL DATA
ENGINE OPERATING DATA
* WITH FAN basis.
Deration for engine
Altitude: 2.5% per 300m (1000ft) above 1,500m
Temperature: 2% per 5℃ (9° F) above 40℃
ENGINE STANDARD EQUIPMENT
Aftercooler
Turbocharger filter
Structure ste el bas e
Crankcase breather
Charging alternator
Lubricating oil cooler
Fuel filters, full flow paper element
Fuel transfer pump, gear driven, plunger type
Electronic type governor
Jacket water heater
Jacket water pump, gear driven
Lubricating oil filter, full flow paper element
Lubricating oil pump, gear driven
Exhaust dry manifold
Radiator, blower fan, fan drive
Manual shutoff
24V DC electric starting motor
Loading...