MITSUBISHI MGS SERIES
Overall dimensions
L : Length
mm
5550
W : Width
mm
2200
Total Weight (Dry)
kg
13450
Total Weight (Wet)
kg
14100
MMGGSS22000000BB
DIESEL GENERATOR SET
50Hz/1500 rpm/380V
POWER RATING (0.8 P.F.) MODEL CODE
STAND-BY 2220 kVA 5S-L51L7
PRIME 2015 kVA 5P-L51L7
MGS2000B with typical options
Voltage Variation
■ Standard Voltage 3Phase 4 Wires
380V
■ Volt ages A vailable 3Phase 4 Wires
380, 400, 415 and 440V
Note: Outputs for optional voltages may differ from standard output mentioned above.
CONDITIONS & DEFINITIONS
Stand-by: Code: S
Applicable for supplying emergency power at varying load in the event of the normal utility power interruption.
Fuel stop power in accordance with ISO15550, IS O3046/1, JISB8002-1, DIN6271 and BS5514.
Overload: not allowed
Prime: Code: P
Applicable for supply ing em erg ency p ower at varying load in t he ev ent of normal utility power inter ruption. + 10% overload
in accordance with ISO3046/1. Overload power in accordance with ISO15550, ISO3046/1, JIS8002-1, DIN6271 and
BS5514.
Conditions:
Engine ratings are based on SAE J1349 standard conditions and also apply at ISO3046/1, DIN6271 & BS5514 standard
conditions.
Fuel rates: based on A ST M D975, BS2869 and on fuel oil of 35° API (16°C or 60° F) gravity hav ing a LH V of 4 2, 78 0 kJ /kg
(18,390 Btu/lb.) when used at 29°C (85° F) and weighing 838.9 g/liter (7.001lbs./U.S. gal.).
Note: * For conditions of pri me power (P.R.P.) and additional ra ting requirements, please consul t your nearest Mitsub ish i
MGS dealer.
DIMENSION (Reference Data)
H : Height mm 2829
MITSUBISHI MGS SERIES
Bore
mm
170
Stroke
mm
180
Displacement L 65.4
Piston speed
m/sec.
9.0
Compression ratio 13.5
Lubricating oil capacity L 230
Coolant capacity without radiator
L
170
Coolant pump external resistance
m water
5.0
Coolant pump flow rate
L/min
1650
Cooling fan airflow rate
m3/min
2040
Cooling fan air flow restriction
kPa
0.1
Allowable exhaust back pressure
kPa
6.0
Exhaust flange size (internal diameter)
mm
350
Gross Engine Power*
kWm
1850
1679
Brake mean effective pressure
MPa
2.3
2.1
Regenerative absorption
kW
140
140
Noise Level at 1 m
dB(A)
112
111
(excluding: intake, exhaust & fan)
Fuel consumption load 100%*
L/hr.
469
426
Fuel consumption load 75%*
L/hr.
355
323
Combustion air inlet flow rate
m3/min
161
146
Exhaust gas flow rate
m3/min
424
385
Heat rejection to coolant
kW
1168
1061
Heat rejection to exhaust
kW
1486
1348
Heat rejection to atmosphere from engine
kW
140
127
Heat rejection to atmosphere from generator
kW
72
65
STAND-BY
2220 kVA
MGS SERIES DIESEL ENGINE: MITSUBISHI S16R-PTA2-S
PRIME
2015 kV A
DIESEL GENERATOR SET
MGS2000B
V-16, 4 stroke-cycle water-cooled, turbocharged and aftercooled
ENGINE SPECIFICATIONS & TECHNICAL DATA
Ambient air temperature
℃
ENGINE OPERATING DATA
Exhaust gas temperature
* WITH FAN basis.
Deration for engine
Note: Please consult with your nearest Mitsubishi MGS dealer
℃
ENGINE STANDARD EQUIPMENT
Aftercooler
Turbocharger filter
Structure ste el bas e
Crankcase breather
Charging alternator
Lubricating oil cooler
Fuel filters, full flow paper element
Fuel transfer pump, gear driven, plunger type
Electronic type governor
Jacket water heater
Jacket water pump, gear driven
Lubricating oil filter, full flow paper element
Lubricating oil pump, gear driven
Exhaust dry manifold
Radiator, blower fan, fan drive
Manual shutoff
24V DC electric starting mot or
40
560 550
Loading...