Milton CAT D3K2 User Manual

D3K2
Track-Type Tractor
Engine Weights
Engine Model* Cat Rated Net Power at 2,200 rpm Operating Weight – LGP 8403 kg 18,525 lb SAE J1349 59.7 kW 80 hp Operating Weight – LGP, 762 mm (30 in) 8609 kg 18,980 lb ISO 9249/EEC 80/1269 59.7 kW 80 hp
®
C4.4 ACERT™ Operating Weight – XL 7958 kg 17,544 lb
* Engine meets U.S. EPA Tier 4 Interim/EU Stage IIIB/Japan MLIT Step 4
emission standards.
Simply the smoothest  nish grading tractor in the industry. Period.
Contents
Operator Station..................................................4
Hydrostatic Transmission ..................................6
Engine ...................................................................6
Undercarriage .....................................................7
AccuGrade™ Systems .......................................8
Blade and Attachments .....................................9
Serviceability and Customer Support............10
Speci cations ....................................................11
Standard Equipment.........................................14
Optional Equipment...........................................15
Experience the most intuitive nish grading tractor in the industry. The Cat® D3K2 Track-Type Tractor with Stable Blade delivers a smooth nish grade with less operator effort. Stable Blade senses ground conditions and works with the operator to produce the desired grade. The addition of the integrated AccuGrade™ grade control system helps you get to target grade even faster, with fewer passes and less manpower. Fromthe rst cut to nish grade, the D3K2 sets the standard.
Operator Station
Everyone can get comfortable in this cab.
Seat-Mounted Joystick Controls
Ergonomically designed, seat-mounted controls isolate vibrations from the operator for optimum comfort and precise control.
• New contoured armrest cushion
• Bi-directional transmission shifting
• Easy to grip handles
• New heated control handles (optional)
4
Stable Blade Control
New Stable Blade control makes operating the machine easy forbothnew and experienced operators.
• Stable Blade complements operator input for smooth nish gradingresults
• Handle ts to hand to allow for more precise control and reduce operator fatigue
• Thumb roller for low effort blade angle control
• Blade shake feature for easy removal of material
All Day Comfort
The spacious, comfortable cab helps keep you relaxed and productive throughout the day.
• Quiet environment – 78 dB(A) – ANSI/SAE J1166 OCT98
• Wide door openings for easy entry/exit
• Dash mounted air vents for improved air circulation
• Air suspension seat for a more comfortable ride
• Air conditioning for greater comfort in all climates
• New ventilated seat (optional)
• Heated seat and heated control handles (optional)
Monitoring Package
Easy to read display provides vital system information. Easy to read gauges keep you informed of system conditions. Larger AccuGrade™ CB460 GPS display is available as an option and is mounted in line withblade corners for easy viewing.
Outstanding Visibility
Large door windows provide an unobstructed view to the blade corners and cutting edge which is especially important in ne grading, curbing and working against foundations. Large side windows offer a clear view to the sides of the machine.
5
Hydrostatic Transmission
Responsive to changing loads.
Traction Control
Increase your productivity with the new Traction Control feature:
• Reduces track slippage
• Activated with a button on the transmission control
• Reduces undercarriage wear
• Improves fuel economy
Performance
Quick response to varying loads for shorter cycle times and less operator fatigue.
Maneuverability
• Intuitive control helps you work in tight areas
• Power turn feature provides power to both tracks while working in conned areas
• Counter-rotation provides quick steering corrections during side loading applications
Cat C4.4 Engine
The C4.4 engine responds quickly to changing loads. Eco mode throttle setting can deliver up to 25% improved fuel economy. Engine meets U.S.EPA Tier 4 Interim, EU Stage IIIB and Japan MLIT Step 4 emission standards using a passive regeneration solution:
• Simple…no operator interaction required
• Long life diesel particulate lter (no service required for 8,000 hours)
6
Engine
Increased horsepower, improved fuel economy.
Undercarriage
Solutions to lower your costs per hour.
Choice of Undercarriage Congurations to Meet Your Application
Track frames are available in extra long (XL) or low ground pressure (LGP) congurations:
• XL undercarriage for most applications where otation and side stability are not extreme
• LGP undercarriage for soft underfoot conditions where additional otation is required
• 762 mm (30 in) LGP undercarriage available for extremely soft underfoot conditions
Track Selections
Caterpillar offers a choice of two undercarriages – Sealed and Lubricated Track (SALT) and SystemOne™. Matching the correct undercarriage to the application and soil conditions will deliver the lowest costs per hour.
Sealed and Lubricated Track (SALT) Undercarriage – For applications where the track is not bushing limited – May require pin and bushing turn
SystemOne™ Undercarriage – For applications where track is bushing limited – Bushing rotates continuously – Does not require bushing turn – Designed to maximize the life of all undercarriage components
7
AccuGrade™ Systems
Grade with increased accuracy.
Improve Your Efciency with AccuGrade
AccuGrade is a fast machine grade control system which enables operators to cut and ll to grade with increased accuracy, minimizing the need for traditional stakes and grade checkers. Caterpillar offers a choice of Laser, GNSS or Universal Total Station solutions:
AccuGrade Laser – for two dimensional at type work
AccuGrade GNSS – for three dimensional cut to contour work
Universal Total Station – for ne and nish grade applications
New Larger Displays
Easy to read, large displays let you focus on your work:
• CB450 Laser Display – Larger 109 mm (4.3 in) color display
• CB 460 GNSS Display – Larger 178 mm (7 in) color display – USB data port – 3.7 gig internal disk space
8
Blade and Attachments
Power pitch blade for maximum productivity.
Power Pitch Blade
The power pitch blade feature lets the operator adjust the blade pitch to meet various operating conditions without ever leaving the cab.
• Pitch the blade forward for increased penetration
• Lay the blade back for maximum carrying capacity
• Change the pitch from inside the cab
• Optimize blade pitch for application
• Improves productivity
VPAT Blade
The VPAT blade is specically designed for  nish grading, backlling ditches, cutting V ditches, windrowing, ll spreading, medium land clearing and heavy dozing. Built for rugged strength and durability this 6-way blade allows for maximum angle, tilt and pitch.
Hydrostatic Winch
The Cat hydrostatic winch features:
• Excellent line pull at any speed
• Innitely variable drum speed
• Lower operator effort
• Unmatched load control
Parallelogram Ripper
The aggressive parallelogram ripper lets you do more productive ripper work. The parallel linkage design provides better penetration and maneuverability in tight working areas.
Forestry Options
An easier way to work in the woods. The following features are available forforestry applications:
• Cat hydrostatic winch
• 360 degree guarding, for added protection of the cab
• Heavy-duty rear tank guard
9
Serviceability and Customer Support
Easy service and unmatched support keep you working.
Easy Access
Long service intervals and easy maintenance keep the machine up and running to lower your owning andoperatingcosts.
• Large, hinged door on the left side of the engine compartment for easy access to all regular engine maintenance points
• Grouped pressure taps for quick testing and troubleshooting of the hydraulic system
• Easy ground level access to hydraulic lters located intheleft rear service compartment
Product Link
The optional Product Link system simplies equipment eet tracking. Using satellite or cellular technology, the system automatically reports information such as location, machine hours, active and logged service codes and security alarms.
Renowned Cat Dealer Support
From helping you choose the right machine to knowledgeable ongoing support, Cat dealers provide the best in sales and service.
• Preventive maintenance programs and guaranteed maintenance contracts
• Best-in-class parts availability
• Operator training to help boost your prots
• Genuine Cat Remanufactured parts
• SITECH® dealer support for grade control solutions
10
D3K2 Track-Type Tractor Specications
Engine
Engine model Cat C4.4 ACERT
Rated Net Power @ 2,200 rpm
SAE J1349 59.7 kW 80 hp
ISO 9249/EEC80/1269 59.7 kW 80 hp
Bore 105 mm 4.13 in
Stroke 127 mm 5 in
Displacement 4.4 L 269 in
3
• Ratings at 2,200 rpm.
• Net power advertised is the power available at the  ywheel when engine is equipped with fan, air cleaner, mufer and alternator.
• No derating required up to 3000 m (9,843 ft) altitude.
Weights
Operating weight –XL 7958 kg 17,544 lb
Operating weight –LGP 8403 kg 18,525 lb
Operating Weight – LGP, 8609 kg 18,980 lb 762 mm (30 in)
• Specications shown are for machine equipped with dozer blade, canopy ROPS, back-up alarm, operator, coolant, lubricants and full fuel tank.
Drawbar
Transmission
Drive pumps 2
Track motors 2
Relief valve settings 47 700 kPa 6,918 psi
Maximum travel speed – forward 9 km/h 5.6 mph
Maximum travel speed – reverse 10 km/h 6.2 mph
• Dual-path, closed loop hydrostatic drive provides in nitely variable speeds from 0-9km/h (0-5.6 mph) forward and 0-10km/h (0-6.2 mph) reverse.
• Full- ow ltering of hydrostatic charge system oil.
• Drive pumps: two variable-displacement, slipper-axial piston pumps mounted tandem-style to engine  ywheel housing.
• Track motors: two variable-displacement, link-type piston motors.
Service Re ll Capacities
Fuel tank 195 L 51.5 gal
Crankcase andlter 11 L 2.91 gal
Final drives, XL (each side) 10 L 2.6 gal
Final drives, LGP (each side) 10 L 2.6 gal
Cooling system 22.4 L 5.92 gal
Transmission/hydraulic tank 59.5 L 15.7 gal
Hydraulic Controls
lb N
29.3
24.8
20.3
15.8
11.3
6.8
2.3
Drawbar Pull
140
120
100
80
60
40
20
0
1 3 5 7 9
0
1.2 2.5 3.7 5.0 6.2 mph
Speed
Pump output 73.5 L/min 19.4 gal/min
Relief valve setting 20 600 kPa 2,988 psi
• Pump output ratings at 2,150 rpm and 6895 kPa (1,000 psi).
• Control positions: – Lift cylinders – raise, hold, lower,  oat. – Tilt cylinders – left, hold, right. – Angle cylinders – left, hold, right. – Ripper cylinders – raise, hold, lower.
Final Drive
Features:
• Double-reduction planetary gear set.
• Mounted independently of track frames to isolate them from machine weight and ground-induced shock loads.
km/h
Steering and Braking
Features:
• Full powerturn.
• Counter-rotation.
• Single lever steering, speed and direction control.
• Hydrostatic (dynamic) braking through machine drive system using transmission control lever, center brake pedal or decel pedal.
11
D3K2 Track-Type Tractor Specications
Undercarriage
Number of rollers (each side) 6
Number of shoes (each side) – SALT 43 (Sealed and Lubricated Track) Undercarriage
Number of shoes (each side) – 38 SystemOne Undercarriage
Shoe width – XL 406 mm 16 in
Shoe width – LGP 635 mm 25 in
Shoe width – LGP, 762 mm (30 in) 762 mm 30 in
Length of track onground – XL 2248 mm 89 in
Length of track onground – LGP 2248 mm 89 in
Length of track onground – LGP, 2248 mm 89 in 762mm (30 in)
Track gauge – XL 1495 mm 59 in
Track gauge – LGP 1725 mm 68 in
Track gauge – LGP, 762 mm (30 in) 1860 mm 73 in
2
Ground contact area – XL 18 254 cm
Ground contact area – LGP 28 550 cm2 4,425 in
Ground contact area – LGP, 34 452 cm2 5,340 in 762 mm (30 in)
Ground pressure –XL 42.8 kPa 6.2 psi
Ground pressure –LGP 30.0 kPa 4.2 psi
Ground pressue – LGP, 762 mm (30 in) 24.8 kPa 3.6 psi
• Hydraulic track adjusters.
• Box section track roller frames.
• Bolt-on rear track guiding guards.
• Full length recoil guarding with sprocket guards and wipers.
• Master link – SystemOne and SALT.
• Single-grouser shoes.
• Segmented sprocket (SALT).
• Sealed and lubricated rollers and idlers.
2,829 in
Standards
Sound levels:
ISO 6396:2008 77 dB(A)
SAE J1166 FEB2008 78 dB(A)
ROPS SAE J397-OCT95,
SAEJ1040-MAY94, ISO3471-94, ISO3164-95
FOPS SAE J231-JAN81,
ISO3449-92
Ripper
Type Parallelogram
Number of shanks 3
Maximum diggingdepth 337.5 mm 13.3 in
Maximum reach atground line 766 mm 30.2 in
Maximum ground clearance under tip 448 mm 17.6 in
Overall width 1710 mm 67.3 in
Height 165 mm 6.5 in
Weight 554 kg 1,222 lb
Winch
Weight 610 kg 1,345 lb
Winch drive Hydrostatic
Control Hydraulic
Speed Variable
Winch length 705 mm 27.76 in
2
2
2
Overall width 741 mm 29.2 in
Drum diameter 254 mm 10 in
Drum width 274 mm 10.8 in
Throat clearance 171.5 mm 6.75 in
Rope diameter – recommended 16 mm 0.63 in
Rope diameter – optional 19 mm 0.75 in
Drum capacity – recommended cable 113 m 371 ft
Drum capacity – optional cable
Maximum line pull –bare drum 18 144 kg 40,000 lb
Maximum line pull –full drum 11 340 kg 25,000 lb
Maximum line speed – bare drum 40 m/min 131 ft/min
Maximum line speed – full drum 63 m/min 207 ft/min
• Innitely variable line speed and line pull from 0 to maximum.
• Power in/power out, brake off, free spool (standard equipment).
• Single lever, low effort hydraulic control.
• Precise load control and speed modulation.
• Integral mounted drawbar.
• 3 roller fairlead available. Kit available to add a 4th roller.
78 m 256 ft
12
Dimensions
All dimensions are approximate.
1
2
7 3
Track gauge
1
Width of tractor (standard shoes, no blade)
2
Overall length (with blade)
3
Length of basic tractor (without blade)
4
Tractor height
5
Ground clearance
6
5
8
9
11
10
4
Grouser Height: 47 mm (1.9")
1495 mm
1901 mm
4266 mm
3275 mm
2763 mm
332 mm
XL
58.9 in
74.8 in
168 in
128.9 in
108.8 in
13 in
1725 mm 67.9 in
2360 mm 92.9 in
4255 mm 167.6 in
3275 mm 128.9 in
2763 mm 108.8 in
332 mm 13 in
LGP
2716 mm
(106.9")
6
LGP, 762 mm (30 in)
1860 mm 73 in
2411 mm 94.9 in
4255 mm 167.6 in
3275 mm 128.9 in
2763 mm 108.8 in
332 mm 13 in
BLADE
Blade width
7
Blade height
8
Blade lift height
9
Digging depth
10
Blade cutting edge angle, adjustable
11
Maximum tilt
Maximum angle (either side)
Blade width at maximum angle
Blade capacity (SAE)
XL
2646 mm 104.2 in
910 mm 35.8 in
730 mm 28.7 in
573 mm 22.5 in
52° to 58°
368 mm 14.5 in
25°
2417 mm 95.2 in
3
1.52 m
1.99 yd
Intermediate
2921 mm 115 in
860 mm 33.9 in
743 mm 29.3 in
573 mm 22.5 in
52° to 58°
448 mm 17.7 in
2669 mm 105.1 in
3
1.50 m
3
25°
1.96 yd
3149 mm 124 in
860 mm 33.8 in
730 mm 28.7 in
573 mm 22.5 in
52° to 58°
438 mm 17.2 in
2874 mm 113.1 in
3
1.66 m
3
LGP
25°
2.17 yd
3
13
D3K2 Standard Equipment
Standard equipment may vary. Consult your Cat dealer for details.
ELECTRICAL
• Alternator, 12 volt, 120 Amp, heavy duty
• Alarm, backup
• Batteries, two, heavy duty, maintenance free, 750CCA
• Diagnostic connector
• Horn, electric
• Lights, halogen, 2 front and 2 rear
• Starter, electric, 12 volt
OPERATOR STATION
• ROPS/FOPS canopy
• Seat, air suspension, cloth or vinyl
• Seatbelt, retractable 76 mm (3 in)
• Foot pads, dash
• Electronic Monitoring System with: – Gauges for engine coolant temperature,
hydraulic oil temperature and fuel level – Travel speed limiter, electronic – Engine RPM and gear display – Hour meter, electric – Engine air cleaner service indicator,
electronic – Water-in-fuel indicator, electronic
• Throttle switch, rotary
• Eco mode
• Controls, seat mounted, fore/aft adjustment
• Armrests, adjustable
• Mirror, rearview, inside
• Single pedal combining deceleration andbraking functions
• Independent forward/reverse speed settings
• Power port, 12 volt
• Coat hook
• Storage compartment
• Cup holder
• Floor mat, rubber, heavy duty
HYDRAULICS
• Hydraulics, 3 valve
• Load sensing hydraulics
• Single lever, three function control
• Hydraulic pump and oil
• Stable blade control
POWER TRAIN
• Cat C4.4 ACERT™ diesel engine, turbocharged, U.S. EPA Tier 4 Interim andEU Stage IIIB certi ed with aftertreatment
• Aftercooler, Air-to-Air (ATAAC)
• Aluminum bar plate cooling system (radiator,power train)
• Air cleaner with precleaner, automatic dustejection and under-hood intake
• Dual path, closed-loop hydrostatic transmission
• Electric fuel priming pump
• Fuel/water separator
• Traction Control
UNDERCARRIAGE
• SALT Undercarriage
• 6 roller track frame
• Track rollers, lifetime lubricated
• Carrier rollers
• Track adjusters, hydraulic
• Guards, front/rear guiding
• Master link
OTHER STANDARD EQUIPMENT
• C-Frame, VPAT, hydraulic cylinders andlines
• Lockable engine enclosures
• Front pull device
• Rigid drawbar
• Ecology drains (engine, power train andimplement oil and engine coolant)
• Scheduled oil sampling ports (engine, power train implement oil)
• Vandalism protection
• Heavy duty crankcase guard
ANTIFREEZE
• Extended life coolant, –37° C (–35° F)
14
Optional equipment may vary. Consult your Cat dealer for details.
D3K2 Optional Equipment
ELECTRICAL
• Integrated four front halogen lights, two rear halogen lights
POWER TRAIN
• Drive, auxiliary
• Installation, winch
UNDERCARRIAGE
• Track Pairs, XL: – Track, 406 mm (16 in) MS SystemOne™
• Track Pairs, LGP: – Track, 635 mm (25 in) MS SystemOne™ – Track, 762 mm (30 in) MS SystemOne™
OPERATOR STATION
• Cab with air conditioning
• Cab, polycarbonate windows and air conditioning
• Seat, air suspension, choice of: – Vinyl, heated seat with heated controls – Cloth, heated seat with heated controls – Cloth, heated and ventilated seat
withheated controls
• Radio, AM/FM, CD player
• Sound suppression
HYDRAULICS
• Hydraulics, 4 valve for use with ripper
• Hydraulics, 4 valve for use with winch
GUARDS
• Guard, rear, heavy duty
• Grill, radiator, heavy duty
• Guard, track guiding, center
• Guard, track roller, full length
• Screen, rear, cab
• Screen, side, cab
• Screen, rear, canopy
• Screen, front and doors, canopy
• Sweeps, front
• Sweeps, rear
BLADES
• VPAT XL blade
• VPAT LGP blade
• VPAT Intermediate blade
REAR ATTACHMENTS
• Drawbar, towing
• Mounting, winch
• Ripper, parallelogram, includes three shanks and teeth
REAR ATTACHMENT CONTROL
• Control, ripper
• Control, winch
• Control, ripper and winch
MACHINE CONTROL AND GUIDANCE
• Installation, AccuGrade ready
• Power Pitch blade control
STARTING AIDS
• Heater, engine, coolant, 120 volt
• Starting aid, ether
OTHER ATTACHMENTS
• Machine Security System
• Cat Product Link 321
• Cat Product Link 121
• Cat Product Link 522
ANTIFREEZE
• Extended life coolant, –50° C (–58° F)
FIELD INSTALLED ATTACHMENT
• Winch, hydrostatic
15
D3K2 Track-Type Tractor
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com
© 2012 Caterpillar Inc. All rights reserved
Materials and specications are subject to change without notice. Featured machines in photos may include additional equipment. See your Cat dealer for available options.
CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, “Caterpillar Yellow” and the “Power Edge” trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
AEHQ6685 (03-2012)
Loading...