HGE 60, HGE 70
UV Rotisserie
l Tournebroche
s Rostizador
H 4680 B / H 4682 B / H 4688 B
H 4780 B / H 4782 B
H 4780 BP / H 4782 BP
M.-Nr. 06 645 652
UV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
HGE 60: Rotisserie for H 4680 B / H 4682 B / H 4688 B . . . . . . . . . . . . . . . . . . . . . 3
HGE 70: Rotisserie for H 4780 B / H 4782 B / H 4780 BP / H 4782 BP . . . . . . . . . . 6
l . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
HGE 60: Tournebroche pour H 4680 B / H 4682 B / H 4688 B . . . . . . . . . . . . . . . . 8
HGE 70: Tournebroche pour H 4780 B / H 4782 B / H 4780 BP / H 4782 BP . . . . 11
s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
HGE 60: Rostizador para H 4680 B / H 4682 B / H 4688 B. . . . . . . . . . . . . . . . . . 13
HGE 70: Rostizador para H 4780 B / H 4782 B / H 4780 BP / H 4782 BP . . . . . . 16
Contents
2
HGE 60:
Rotisserie for H 4680 B /
H 4682 B / H 4688 B
The rotisserie evenly broils and adds a
finishing touch to items such as stuffed
meat, tied roasts, poultry, and kabobs
by gently turning the skewer during the
broiling function.
The skewer is inserted into the
rotisserie motor in the back panel.
The roast probe cannot be used at
the same time as the rotisserie. The
cable could wind around the
rotisserie and be damaged.
Replacing the retaining spring
(Only in ovens with the serial number
59226538 or lower)
The rotisserie is guided through a
retaining spring into the rotisserie motor
in the rear wall. In some ovens the
spring must be changed before the
rotisserie can be used.
Please see the silver data plate along
the front side of the open oven door for
the oven's serial number.
The retaining spring must be changed
if the serial number is 59226538 or
lower.
If you need help changing the spring,
please call Technical Service at the
phone numbers listed on the back of
this manual.
UV
3
How to replace the retaining spring
^
First remove the runners.
^
Loosen the screws in the back panel
and remove the panel.
^
Using pliers, press the retaining
spring together and remove.
^
Insert the new retaining spring.
^
Insert and secure the back panel.
The oven must not be used without
the back panel in place. This could
lead to injuries.
UV
4
Use
^
Secure meat or poultry on the skewer.
Poultry legs should be tied together to
prevent them from catching on the
heating element or burning.
^
Assemble the rotisserie as shown.
^ Put the rotisserie in the oven, using
the lowest level runner.
^
Insert the skewer into the grill motor
at the back of the oven.
^
Select "ROTISSERIE".
The skewer will rotate.
Cleaning and care
^
Clean the rotisserie by hand with
liquid dish soap and hot water.
UV
5
HGE 70:
Rotisserie for H 4780 B /
H 4782 B / H 4780 BP /
H 4782 BP
The rotisserie evenly broils and adds a
finishing touch to items such as stuffed
meat, tied roasts, poultry, and kabobs
by gently turning the skewers during
the broiling function.
The skewers are inserted into the
rotisserie motors in the back panel.
The roast probe cannot be used at
the same time as the rotisserie. The
cable could wind around the
rotisserie and be damaged.
UV
6