Miele G 7883, G 7836 User Manual 3

Washing · Disinfection · Drying
A systematic approach to the reprocessing
of laboratory glassware

Washer-disinfectors G 7883 – G 7836 CD

2

3

A systematic approach to the reprocessing
of laboratory glassware

Systematic instrument reprocessing
solutions

With washer-disinfectors, special repro­cessing methods and accessories tailored
to the specific needs of applications, Miele
offers a comprehensive and systematic
approach to the safe and thorough repro­cessing of a wide range of laboratory
glassware. Only a systematic approach
can guarantee reproducible results in both
simple and highly sophisticated applica­tions in organic, inorganic and physical
chemistry, biology, microbiology, in hospi­tal laboratories, and in the pharmaceutical,
food-processing and cosmetics industries.
Miele’s team of specialists is always on
hand to assist laboratory staff in arriving at
tailor-made solutions.

The wide-ranging benefits of the Miele
System

Flexible and economical

• Washer-disinfectors with the capacity to
meet all requirements

• Modular machine concept with basic
features and optional extras

• Efficient single-chamber system for
washing, rinsing, disinfecting and drying

Simple and intelligent

• Tried-and-tested standard programmes,
innovative special programmes and
programme packages

• Electronic controls offering excellent user
convenience

Better be on the safe side!

• Serial interface for process documen­tation and optical interface for servicing

• Machine built to comply with
EN ISO 15883

• Automatic allocation of mobile unit/load
to appropriate programme using sensors

Contents

G 7883, G 7893, G 7883 CD

washer-disinfectors . . . . . . . . . . . . .Page 4

G 7835 CD, G 7836 CD

washer-disinfectors . . . . . . . . . . . .Page 14

NetBox:

Process documentation . . . . . . . .Page 20

Qualification

of cleaning systems . . . . . . . . . . . .Page 22

Upper and lower baskets . . . . . . .Page 26

Inserts and mobile units

for laboratory glassware . . . . . . . .Page 28

Transport trolleys . . . . . . . . . . . . . .Page 36

Plinths . . . . . . . . . . . . . . . . . . . . . .Page 37

Dispenser modules

for liquid detergent . . . . . . . . . . . .Page 38

Demineralisation of water . . . . . . .Page 39

Soft water . . . . . . . . . . . . . . . . . . .Page 42

Technical data

G 7883, G 7893, G 7883 CD . . . . .Page 44

Technical data

G 7835 CD, G 7836 CD . . . . . . . . .Page 46

Sophisticated and innovative

• Intensive R&D and close cooperation
with hygiene experts, scientists and
users

• Trend-setting process development and
technical features

All from a single source

• Miele offers its own advisory services
and after-sales service network

• Qualification (Installation Qualification
and Operation Qualification) of laboratory
glassware cleaning systems

• Service contracts for peace of mind

• Attractive financing

Technical features vary according to the model

4

Practical experience combined with expertise
Typically Miele

Manual v. machine-based reprocessing

Many laboratories have deliberately cho­sen to wash their laboratory glassware,
e.g. beakers, pipettes, volumetrics and
flasks, Erlenmeyer flasks, Petri dishes and
test tubes, in a machine-based process.
One reason for this is to avoid the risk of
exposure to hazardous substances.
Broken glass from manual cleaning, for
instance, can cause serious injuries. Infec­tious and toxic contaminants pose a health
hazard. Cleaning agents often contain
substances that are highly irritant.
Automatic, machine-based processes are
also more easily standardised, validated
and documented. Because washer-disin­fectors operate as a closed system with
programmes that run fully automatically,
the potential risk to laboratory personnel
can be kept to a minimum. This in turn
means that machine preparation provides
personnel with maximum protection.

Laboratories use a wide variety of equip­ment made from glass, ceramic ware and
plastic for testing and analysis, creating
reactions, for isolating or cleaning sub­stances and for taking samples, etc.
Following on from this, cleaning and drying
are essential. The cleaning process must
ensure that equipment, when re-used, is
not affected by its previous use. Require­ments vary widely from one laboratory to
the next. To establish which machines and
accessories, cleaning agents, water quality
and cleaning programmes best suit an
application, the following aspects need to
be considered:

1. Applications

Applications subdivide into general areas
(organic, inorganic or physical chemistry,
biology, microbiology, hospital, pharma­ceutical, food industry or cosmetic industry
laboratories, etc.). The type of application
will also be an important factor in deter­mining the type of machine and acces­sories as well as the cleaning process and
cleaning agents required.

2. Laboratory machines

Laboratory equipment needs to be classi­fied according to its various components
(beakers, conical flasks, measuring flasks
and cylinders, pipettes, Petri dishes, test
tubes, phials, centrifugal test tubes, etc.),
and according to size and volume (1 ml,
500 ml, 1000 ml) and the number of items
requiring processing. This information will
enable us to quote the right system for
your requirements.

5

3. Contamination

An intimate knowledge of the physical and
chemical attributes of the contaminants
the machine will need to deal with is of
particular importance in choosing the most
appropriate cleaning process and deter­gents.
Physical and chemical properties of a con­taminant include, for instance, its solubility
in water in acidic, pH-neutral and alkaline
conditions, the efficacy of hydrolysis or ox­idation, melting and softening points, its
ability to emulsify as well as a substance’s
suspension or dispersing properties.

4. Disinfection

For certain applications laboratory glass­ware has to be disinfected. On the one
hand this protects laboratory personnel
who come into contact with bacterial
contamination at work. And on the other,
disinfection prevents bacterial cross-con­tamination of test samples and instruments
in medical laboratories, hygiene institutes
and pharmaceutical laboratories in the
food and cosmetics industry.

5. Analytical Methods

The results of analyses can be falsified by
contaminants on laboratory glassware.
Knowledge of these factors can help in
selecting the correct cleaning agent.

6. Analytical purity

Each laboratory has its own definition of
“analytical purity”, depending on specifica­tions and the nature and reproducibility of
test methods. The washer-disinfector, in­cluding all its accessories and the cleaning
programme used, must be able to achieve
cleaning results that meet the standards
required by the application.

Miele’s systematic approach covers the
following process stages

• Cleaning, disinfection and drying

• Baskets and inserts

• Water treatment

• Detergent recommendations

• Compilation and analysis of cleaning
programmes

• Machine commissioning by Miele Service

• Qualification package: Installation
Qualification (IQ) and Operation
Qualification (OQ)

• Peace-of-mind package including
maintenance and service contracts

6

The illustration shows: – G 7883 lab washer – O 188/1 upper basket – E 106 insert – AK 12 insert

– U 874/1 lower basket – 2 x E 109 insert

7

G 7883, G 7893, G 7883 CD
washer-disinfectors

G 7883 washer-disinfector

• H 850 (820), W 600, D 600 mm

• MULTITRONIC Novo Plus controls with
10 programmes

• Convertible to single-phase connection

• Integrated dispenser pump for process
chemicals (neutralising agent)

• Capacity per batch: 39 narrow-necked
glasses or 116 pipettes or 1600 test
tubes

G 7893 washer-disinfector

• H 850 (820), W 600, D 600 mm

• MULTITRONIC Novo Plus controls with
10 programmes

• Integrated dispenser pump for process
chemicals (neutralising agent)

• Drying Plus: Integrated hot-air drying

• Throughput per batch:
37 narrow-necked glasses or 96 pipettes
or 1600 test tubes

G 7883 CD washer-disinfector

• H 820 (850), W 900, D 700 mm

• MULTITRONIC Novo Plus controls with
10 programmes

• 2 integrated dispenser pumps for
process chemicals (alkaline
detergent/neutralising agent)

• Drawer with 2 supply containers, 5 l each

• Integrated hot-air drying unit

• Throughput per batch:
37 narrow-necked glasses or 96 pipettes
or 1600 test tubes

• Optional version with oil- and grease-re­sistant gaskets for use in petrochemical,
cosmetics and food-processing indus­tries

NEW:

First 60 cm wide washer-disinfector with
integrated hot-air drying

Miele laboratory glassware washers

Miele lab washers are available both as
freestanding and built-under units. All
machines are complete with supply lead
(without plug), and water inlet and
drainage hoses._Baskets and inserts for
laboratory glassware are configured
individually for the glassware load in hand.
Further useful equipment, e.g. liquid
dispensers for detergents and surfactants,
are listed on Pages 38–42.

Hygiene, Safety, Efficiency

• Thorough cleaning and disinfection in a
closed-circuit system

• Glassware reprocessing for analytical
experiments

• Main wash/rinse cycle optionally with
fully demineralised water

• Reproducible results, validatable and
qualifiable processes

• Thermal disinfection

• Process documentation interface
(depends on model)

• Extensive safety features in accordance
with EN ISO 15883

• Connection option for liquid dispensing
systems

Technical data Page 44/45

Illustration shows machine with lid

8

G 7883, G 7893, G 7883 CD washer-disinfectors

Miele quality – Made in Germany

Dependable lab washers are indispensible
in coping with the glassware used routinely
in analytical experiments. Miele lab wash­ers are uncompromising in terms of quality,
offering users both economical and practi­cal benefits. Each and every machine de­tail is closely geared to the requirements of
laboratories requiring optimised processes,
reproducible results and a high degree of
reliability.

Design

• Freestanding/built-under unit

• Double-skinned design, insulated door
for excellent soundproofing

• Wash cabinet and spray arms in high­grade stainless steel

• Fibre-reinforced hoses

Washing technology

• Hygienic freshwater system with fresh
water intake for each programme stage

• 2 spray arms (third spray arm on upper
basket) for thorough cleaning of laborato­ry glassware

• Optimum arrangement of spray nozzles
and regulatable spray arm speed for best
possible cleaning results

• Thorough cleaning of lumens with
injector system

• Direct docking of upper baskets to water
circuit for maximum utilisation of wash
liquor

Standard features

• Profi-Monobloc water softener;
reactivation internalised into programme
cycle with only low salt consumption;
separate reactivation not required

• Powerful circulation pump, max. through­put 400 l/min

• 4-fold filtration system with surface filter,
coarse filter, glass splinter filter and
micro-fine filter.

• Efficient steam condenser

• Flowmeter to monitor water intake
quantities

• Integrated dispenser pump(s) for liquid
products

• Connection option for liquid dispensing
systems

• Hot-air drying on G 7893 and G 7883 CD

Interfaces

• Serial RS 232 interface for process
documentation (depends on model)

• Optical interface for service and
maintenance

Safety devices

• Electrical door interlock

• Programme safety cut out

• Optical and acoustic signal at end of
programme

• 2 sensors, 1 each for temperature control
and monitoring

• Port for simple positioning of sensors in
the wash cabinet for machine or process
validation

Illustr.: G 7883

9

Quality, inside and out

Door lock

SST (serial interface)

Test port

Temperature sensors

Cleaning system

Liquid
dispensing

Steam condenser
Heat exchanger

Flow meter

Electronic controls

Water softener

Spaceframe construction

Hot-air drying

The illustration shows: – G 7893 lab washer – E 408 insert

10

11

NEW: G 7893 lab washer
with Drying Plus

Miele, innovation leader in glassware
reprocessing, is the first manufacturer to
offer a 60 cm wide washer-disinfector with
integrated “Drying Plus” hot-air drying.
Miele’s new machine concept enables
comprehensive instrument reprocessing
comprising thorough cleaning, safe disin­fection and effective drying. All mobile
units with a drying unit connection (TA)
support the drying of inner surfaces as well
as external drying.

Even intricately shaped glassware is prop­erly reprocessed thanks to Miele’s hot-air
drying. An integrated HEPA filter (S class
EU 12) guarantees the purity of the air
used for drying. Filters are replaced simply
and conveniently by opening the service
hatch at the front of the machine to remove
the filter.

Miele’s new G 7893 washer-disinfector
meets all requirements, offering Miele’s
proverbial quality – Made in Germany.

Air filter replacement

Wash cabinet with 2 wash levels Wash cabinet with 2 spray arms Water filtration system in cabinet

Direct docking onto water circuit Direct docking onto water circuit Hot-air drying

12

Controls · Programmes · Duration
G 7883, G 7893, G 7893 CD

Fully electronic controls, excellent
process security

Programmes and functions on Miele wash­er-disinfectors G 7883 and G 7893 CD are
reliably controlled and monitored by
MULTITRONIC controls. The majority of
routine reprocessing tasks are covered by
standard washing and disinfection pro­grammes. Process parameters, reprogram­mable within the individual blocks that
constitute a programme cycle, allow
further customising to cater for individual
needs. The serial RS 232 interface (de­pends on model) allows all process data to
be ported to a printer or PC for documen­tation. The protocol contains key pro­gramme data such as running times,
temperatures, dispensing and information
on errors and manual intervention.

Excellent user convenience

Self-explanatory symbols on fascia panel.
The machine status is indicated at any
given time via control lamps. A 3-digit
7-segment indicator in the display with its
own toggle switch can be used to display
the remaining programme duration or the
current washing/disinfection temperature.
Status and control indicators monitor the
process and inform of faults and the need
for servicing.

Features and functions

• Electronic controls MULTITRONIC NOVO
PLUS

• 10 standard washing and disinfection
programmes

• Parameters programmable in wash
blocks

• 2 free programme slots for customised
programmes

• Rotary programme selector switch

• Programme sequence indicator and fault
and service indicators

• Temperature and programme duration
indicator

Illustration shows G 7883 CD

13

G 7883/G 7893/G 7883 CD Washing G 7883/G 7893/G 7883 CD Drying G 7893/G 7883 CD

Duration Cold water Hot water AD Energy Duration Energy

[mins.] [l] [l] [l] [kWh] [mins.] [kWh]
SPECIAL 93°C-10´ 39 11.5 14.0 9.5 2.5 35 0.9
VARIO TD 39 21.5 14.0 9.5 2.3 35 0.9
VACANT PROGRAMME SLOT (PRG. A) 32 12.0 24.5 18.5 2.0 30 0.7
ANORGANICA (PRG. B) 35 11.0 19.5 23.5 2.2 30 0.7
ORGANICA (PRG. C) 34 2.0 35.0 18.5 2.1 30 0.7
STANDARD (PRG. D) 28 2.0 19.5 18.5 1.7 30 0.7
UNIVERSAL (PRG. E) 31 12.0 24.5 18.5 2.0 30 0.7
INTENSIVE (PRG. F) 38 12.0 19.5 28.0 2.4 30 0.7
PLASTICS (PRG. G) 26 34.5 0.0 18.5 1.7 40 0.5
Rinse 3 10.0 0.0 0.0 0.02 – –

Heating: 9 kW (3N AC 400 V 9.7 kW),
excl. steam condenser
Connection to cold water (15°C), hot water (65°C) and demineralised water (15°C)

High performance, efficient use of
energy

High performance, economical Miele
washer-disinfectors offer a large inner
cabinet with 2 wash levels (upper and
lower baskets) for laboratory glassware
and accessories. Direct docking of the
upper basket onto the water circulation
system reduces water consumption per
cycle. Even the water entering the machine
is carefully metered. A flowmeter monitors
water intake quantities and thereby
ensures precise detergent concentrations.
Water and effluent costs are therefore
reduced accordingly.

Specifications

Washer-disinfector Inner cabinet Cleaning performance Cleaning performance

dimensions H/W/D [mm] [units] [units]
Inner cabinet volume [l]

G 7883

500/535/Top 474,

116 pipettes 39 narrow-necked

Bottom 516

glasses

125

G 7893

500/535/Top 474,

96 pipettes 37 narrow-necked

Bottom 516

glasses

125

G 7883 CD

500/535/Top 474,

96 pipettes 37 narrow-necked

Bottom 516

glasses

125

G 7835 CD

500/535/Top 474,

96 pipettes 37 narrow-necked

Bottom 516

glasses

125

G 7836 CD

500/535/Top 474,

96 pipettes 66 narrow-necked

Bottom 516

glasses

125

G 7825/G 7826 683/541/610 116 pipettes 72 narrow-necked

225 glasses

PG 8527/PG 8528 675/650/800 232 pipettes 115 narrow-necked

351 glasses

O = Upper basket, U = Lower basket

14

The illustration shows: – G 7835 CD lab washer

– E 405/1 insert

15

G 7835 CD, G 7836 CD
lab washers/washer-disinfectors

Washer-disinfector G 7835 CD

• Width 90 cm

• H 820 (850), W 900, D 700 mm

• Freely programmable Profitronic controls

• 2 bellows-type dispenser pumps for
liquid detergent and neutralising agent

• Drawer with 2 supply containers, 5 l each

• Integrated hot-air drying unit

• Capacity per batch:
37 narrow-necked glasses or 96 pipettes
or 1600 test tubes

G 7836 CD washer-disinfector

• H 1175, W 900, D 700 mm

• Freely programmable Profitronic controls

• High-performance unit with 600 l/min
water throughput

• 2 bellows-type dispenser pumps for
liquid detergent and neutralising agent

• Drawer with 4 supply containers, 5 l each

• Integrated hot-air drying unit

• Batch capacity: 66 narrow-necked
glasses or 96 pipettes or 1600 test tubes

Technical data Page 46/47

Illustration shows machine with lid

Hygiene, Safety, Efficiency

• Thorough cleaning and disinfection in a
closed-circuit system

• Glassware reprocessing for analytical
experiments

• Main wash/rinse cycle optionally with
fully demineralised water

• Reproducible results, validatable and
qualifiable processes

• Thermal disinfection

• Process documentation interface

• Extensive safety features in accordance
with EN ISO 15883

• Connection option for liquid dispensing
systems

• Optional version with oil- and grease-re­sistant gaskets for use in petrochemical,
cosmetics and food-processing industry

16

G 7835 CD, G 7836 CD washer-disinfectors

Miele quality – Made in Germany

Dependable lab washers are indispensible
in coping with glassware used routinely in
analytical experiments. Miele lab washers
are uncompromising in terms of quality, of­fering users both economical and practical
benefits. Each and every machine detail is
closely geared to the requirements of labo­ratories requiring optimised processes,
reproducible results and a high degree of
reliability.

Design

• G 7835 CD = Built-under/freestanding
unit
G 7836 CD = Freestanding unit

• Double-skinned design, insulated door
for excellent soundproofing

• Wash cabinet and spray arms in high­grade stainless steel

• Fibre-reinforced hoses

Washing technology

• Hygienic freshwater system with fresh
water intake for each programme stage

• 2 spray arms (third spray arm on upper
basket) for thorough cleaning of
laboratory glassware

• Optimum arrangement of spray nozzles
and regulatable spray arm speed for best
possible cleaning results

• Thorough cleaning of lumens with
injector system

• Direct docking of upper baskets to water
circuit for maximum utilisation of wash
liquor

Standard accessories

• G 7835 CD = Profi-Monobloc water
softener

• G 7836 CD = High-capacity water
softener

• Powerful circulation pump:
G 7835 CD = Qmax 400 l/min
G 7836 CD = Qmax 600 l/min

• 4-fold filtration system with surface filter,
coarse filter, glass splinter filter and
micro-fine filter.

• Efficient steam condenser

• Flowmeter to monitor water intake
quantities

• Integrated dispenser pumps for liquid
process chemicals

• Connection option for external liquid
dispensing systems

• Hot-air drying for thorough drying of
laboratory glassware

Controls

• 64 programme slots

• Customer-specific programme compila­tion option (cf. Page 18)

Interfaces

• Serial RS 232 interface for process
documentation

• Optical interface for service and
maintenance

Safety devices

• Electrical door interlock

• Programme safety cut out

• Optical and acoustic signal at end of
programme

• 2 sensors, 1 each for temperature control
and monitoring

• Port for simple positioning of sensors in
the wash cabinet for machine or process
validation

Illustration shows G 7835 CD

17

Quality, inside and out

Drawer for 2 supply canisters

Wash cabinet with 2 wash levels Wash cabinet with 2 spray arms Magnetic strip for automatic mobile unit recognition

Filtration system in cabinet Direct docking onto water circuit Hot-air drying

Rear of G 7835 CD

18

Controls · Programmes · Duration
G 7835 CD, G 7836 CD

Fully electronic controls, high degree of
process security

Miele’s G 7835 CD and G 7836 CD wash­er-disinfectors are controlled and moni­tored by fully electronic PROFITRONIC
controls. This set of freely programmable
controls offers 64 programme slots. In
addition to standard and service pro­grammes, up to 40 programme slots are
available for customers’ own programmes.
Depending on the model, machines are
fitted ex works with Miele’s innovative
OXIVARIO programme. OXIVARIO addi­tionally dispenses hydrogen peroxide
during the alkaline main wash cycle. This
optimises results in the fields of organic
chemistry and microbiology.

Excellent user convenience

During programme cycles, a large, user­friendly display provides the user with
information on the programme number,
programme name, programme block and
target/actual process parameters (e.g.
temperature, water intake volume, etc.).
Users can choose from 6 pre-loaded lan­guages and select 1 additional program­mable language. Automatic mobile unit
recognition assigns the correct reprocess­ing programme on the basis of load infor­mation provided by a magnetic strip on the
mobile unit.

A serial RS 232 process documentation in­terface is a standard feature on these units.
The optical interface facilitates service
work.

Features and functions

• Freely programmable PROFITRONIC
controls

• 64 programme slots with 11 standard
washing and disinfection programmes
6 special programmes
7 service programmes
40 vacant programme slots

• User navigation with local-language
display

• Display of programme selection and
programming dialogs, programme
sequence, temperature, countdown time,
faults, operating hours.

• Compilation of new programmes using
machine controls or using PC/laptop via
optical interface

19

G 7836 CD Cleaning Drying*

Duration Cold water Hot water AD Energy Duration Energy

[mins.] [l] [l] [l] [kWh] [mins.] [kWh]

SPECIAL 93°C–10’ 50 21.0 25.5 15.5 4.3 38 0.7
SPECIAL 93/10 AN 58 28.5 34.5 21.0 4.9 54 0.9
DES-VAR-TD 50 41.5 19.0 15.5 3.8 33 0.5
DES-VAR-TD AN 61 49.0 33.5 21.0 4.0 50 0.8
VAR-TD-NR 44 29.5 18.5 15.5 3.6 33 0.5
SHOE-TD-75/2 27 26.5 21.0 15.5 1.3 38 0.4

LAB-STANDARD 36 8.5 38.5 16.0 2.8 34 0.7
LAB-UNIVERSAL 42 7.5 54.0 16.0 2.8 34 0.7
LAB-INTENSIVE 47 7.5 54.0 16.0 3.3 34 0.7
ORGANIC 47 – 63.0 16.0 3.4 34 0.7
INORGANIC 45 – 48.0 46.0 2.7 34 0.7

CHEM-DESIN 37 26.5 52.0 – 1.8 41 0.4
CHEM-DESIN 38 26.5 36.5 – 1.7 41 0.4
CHEM-DES-INTENS 40 26.5 53.0 – 1.6 41 0.4
OXIVARIO 66 43.5 35.5 31.5 4.8 33 0.5
OXIVARIO PLUS 76 32.0 30.0 48.5 5.1 33 0.5

*with 6-minute steam condensation pause (No. 48–50 4.33 mins.)
Heating: 9 kW (3N AC 400 V 10.2 kW)
Connection to cold water (15°C), hot water (65°C) and demineralised water (15°C)

G 7835 CD Cleaning Drying

with steam condenser Duration Cold water Hot water AD Energy Duration* Energy

[mins.] [l] [l] [l] [kWh] [mins.] [kWh]

SPECIAL 93°C–10’ 41 14.0 15.5 9.5 3.1 38 0.8
DES-VAR-TD 39 22.5 14.0 10.5 2.4 33 0.6

SHOE-TD-75/2 24 17.5 22.5 0.0 1.6 38 0.5

LABOR-STANDARD 32 10.5 28.0 9.5 1.8 33 0.7
ORGANIC 37 1.0 38.5 10.5 2.3 33 0.7
INORGANIC 38 1.0 38.5 18.5 1.8 33 0.7

*Programme duration with steam condensation pause and gentle start
Heating: 9 kW (3N AC 400 V 9.6 kW)
Connection to cold water (15°C), hot water (65°C) and demineralised water (15°C)

Note:
The G 7835 CD washer-disinfector features the same programmes as the G 7836 CD.
Further information on programme durations, etc., on request.

20

NetBox:
Process documentation in laboratories

Process documentation principles

A significant aspect of quality assurance in
the reprocessing of laboratory glassware is
the documentation of process data. Wash­ing and disinfection is performed using
validatable processes, whereby validation
includes the need for documentation.
Proof that a validated process can be
replicated with each batch is best achieved
by recording and documenting the most
important programme parameters. To
facilitate process documentation on a PC,
Miele has cooperated with IBH Data
Technology GmbH in designing the NetBox
documentation system, tailored to the
needs of Miele washer-disinfectors.
NetBox is a proprietary and comprehen­sive system consisting of both hard- and
software. It allows process protocols from
up to 4 washer-disinfectors to be
processed and archived.

Effective process documentation
system requirements

• Comprehensive system with high level of
process security, including pre-installed
and configurable software

• Tamper-proof

• Simple operation without knowledge of
PCs

• Simple installation

• Process visualisation

• Batch-related documentation

• Documented batch approval

• Long-term archiving

System components

• NetBox with keypad and mouse
plus cables for connection to
washer-disinfector

Optional:

• Flat screen for process visualisation and
load data capture

• Barcode scanner (with connection lead
or wireless using Bluetooth technology)
to simplify machine operation and load
data capture

• RFID transponder as alternative to
barcode system

• Network cable if documentation is to be
installed in a network

21

Load allocation, data storage and archiving

NetBox protocols:
Safe and convenient

The NetBox is a complete documentation
system including pre-configured software.
The system is connected via an interface
to the washer-disinfector. The NetBox
collects all relevant process data during
washing and disinfection programmes. In
standard mode, the unit harvests data fully
automatically without any involvement on
the part of the user. This means maximum
operating safety as the NetBox provides
considerable protection against operating
errors. Once collated, process data re­mains in memory; the NetBox has the ca­pacity to save up to 1000 batch protocols.
Later, data can be saved to a network or a
storage device.

In network mode, the unit can be moni­tored and operated via a PC interface. A
flat-screen monitor is also available as an
optional extra to plot time/temperature
curves. This also helps visualise the data
contained in the wash protocol. A further
optional extra is a barcode scanner or
RFID transponder to facilitate the fast and
simple identification of loads. The user can
also approve or lock batches, depending
on process cycles.

As soon as data is received from a washer­disinfector a batch number is automatically
allocated and a report generated.
Depending on the machines, protocols can
contain the following parameters:

• Batch no., date and Mach. no.

• Programme name

• Programme starting and ending time and
times of individual programme blocks

• Dispenser pump (ID no.), chemical
concentration, temperature and times

• Target temperature reached

• Disinfection temperature and holding
time

• Faults (e.g. water inlet)

• Manual intervention and outages
(e.g. programme aborted, power failure)

On washer-disinfectors with Profitronic
controls, the intervals at which the
time/temperature profile is plotted
(e.g. every 10 secs.) can be defined by the
user.

Protocol administration

At the end of a programme, a batch proto­col is added to the protocol database. All
protocols can be called up at any time to
check protocol parameters such as Batch
no., Mach. no., user, etc. Data records are
write-protected and cannot be modified.
All persons authorised to access the
process documentation programme are
recorded in master records as authorised
users. Access can also be password-pro­tected. An access code determines the
access rights of a user on the system.

Evaluations

NetBox represents an integrated approach
to statistical programme evaluations.
Saved data can also be made available to
other programmes for further processing
and evaluation.

A key advantage of the NetBox in compari­son to PC-based systems is the opera­tional safety factor. NetBox process docu­mentation also simplifies installation and
operation, requires a minimum of space, is
ventilator-free and low-cost.

The process documentation software is
optionally available as a software-only
solution for installation on a Windows PC.

Clip with barcode attached to inserts Scanning of barcode Scanning of staff barcode after batch approval

22

23

In the pharmaceutical, food-processing
and cosmetics industries, all cleaning
systems used in production, quality
assurance and R&D must be “qualified”.

Qualification involves the following: Design
Qualification (DQ), Installation Qualification
(IQ), Operation Qualification (OQ), Perfor­mance Qualification (PQ) and, in some
cases, process validation. In all cases, re­sponsibility for implementing the necessary
measures lies with the equipment operator.
Miele’s in-house after-sales service opera­tion, though, can provide support by
assuming some of the duties incumbent on
the operator. Miele’s tailored service pack­age covers Installation and Operation
Qualification (IQ/OQ).

Implementation

Before IQ/OQ can be performed by Miele’s
in-house service engineers the necessary
documentation must be compiled,
checked and approved by the operator for
use during the inspection. Miele service
technicians will then perform qualification
on the basis of this documentation. All the
necessary calibrated and certified test
apparatus is provided by Miele.

Training of service engineers

Miele’s own service engineers are given
training covering all aspects of machine
technology (installation, programming, re­pair and maintenance) in regular refresher
courses. This is complemented by spe­cialised training on the qualification of
Miele cleaning systems used in industrial
and laboratory operations. Theory and
practice are not confined to washer-disin­fectors either: they also cover all peripheral
units likely to be encountered in industrial
applications (for example Miele’s Aqua
Purificator to produce demineralised water,
dispensing systems and accessories such
as mobile injector units and inserts).

Installation Qualification (IQ)

The objective of Installation Qualification is
to verify that the cleaning system and its
installation comply with the operator’s and
manufacturer’s requirements. During the IQ
inspection, Miele service engineers docu­ment, check and assess the following:
Compliance of shipment with original
order, unit configuration and condition, in­stallation and connection to on-site utilities
and the calibration of certain measuring
systems.

Operation Qualification (OQ)

The objective of Operation Qualification is
to furnish proof that the cleaning system
meets the requirements of the operator
and equipment manufacturer when in­stalled and connected. Operation Qualifi­cation documentation, inspections and
evaluation cover functions with a relevance
to safety and operation, process-related
messages and warnings, and programme
sequence.

Training of operatives and the documenta­tion of such measures is also carried out
during Operation Qualification. This consti­tutes a comprehensive package compris­ing IQ/OQ paperwork, the services of high­ly skilled and qualified service engineers
and the use of calibrated, certified test
apparatus.

Miele Service Pack:
Qualification of cleaning systems

24

25

Alongside compact freestanding and
undercounter models, Miele also manufac­tures high-performance units for central
reprocessing of large quantities of labora­tory glassware. Large decontamination
units are available as single-door and
2-door (barrier) models. The latter, installed
in a diaphragm wall, allows the segregation
of clean and contaminated operations.
Here, too, the single-chamber principle
adopted by Miele, allowing washing,
rinsing, disinfection and drying in a single
cabinet, has proved to be particularly
flexible and economical.

G 7825 and G 7826 washer-disinfectors

• G 7825: Single-door frontloading version
with bottom-hinged door

• G 7826: Two-door barrier machine with
bottom-hinged doors

• Useable cabinet dimensions:
H 683, W 541, D 610 mm

• Useable cabinet volume: 225 l

• Freely programmable Profitronic controls

• Batch capacity:
72 narrow-necked glasses or
104 pipettes

• External dimensions:
H 2404, W 900, D 750 mm
(including plinth and top-box panelling)

Large-capacity

Miele laboratory glassware washers

For detailed description see the
brochure: Large-capacity lab washers
and washer-disinfectors

G 8527 and G 8528 washer-disinfectors

• PG 8527: Single-door frontloading
version with vertical sliding door

• PG 8528: Two-door barrier machine with
vertical sliding doors

• Useable cabinet dimensions:
H 675, W 650, D 800 mm

• Useable cabinet volume: 351 l

• Freely programmable
PROFITRONIC+ controls

• Batch capacity:
232 narrow-necked glasses or
232 pipettes

• External dimensions: H 2420, W 1150,
D 870 mm (incl. plinth and drying unit)

Perfect Miele

• PERFECT TOUCH CONTROL: User­friendly graphic interface with hygienic
glass display

• PERFECTVISION: All-glass doors and
cabinet lighting

• PERFECTSPEED CONTROL: Spray arm
sensing

• PERFECTPURE SENSOR: Measures
conductivity of wash liquor

• PERFECTFLOW SENSOR: Dispensing
volume control

• PERFECT HEPA DRYING: Optimised air
circuit with HEPA Class EU 13 filter

26

Upper and lower baskets

O 188/1 upper basket/carrier

For use in G 7883, G 7893, G 7883 CD,
G 7835 CD, G 7836 CD

• Open front

• For various inserts

• Clearance 165 mm

• Height adjustment +/– 20 mm

• Built-in spray arm

• H 215, W 531, D 475 mm

O 190/1 upper basket/carrier

• As O 188

• Clearance 215 mm

• H 265, W 531, D 475 mm

• Powder dispensing not possible

U 874/1 lower basket/open front

For use in G 7883, G 7893, G 7883 CD,
G 7835 CD, G 7836 CD

• Open front

• For various inserts

• Clearance in combination with upper
basket:
O 175 TA approx. 230 mm +/– 20 mm
O 187 approx. 225 mm +/– 20 mm
O 184 approx. 205 mm +/– 20 mm
O 188/1 approx. 270 mm +/– 20 mm
O 190/1 approx. 220 mm +/– 20 mm

• With holder for ML/2 magnetic strip for
automatic mobile unit recognition

• H 50, W 534, D 515 mm

27

Upper and lower baskets

O 187 upper basket/injector unit

For use in G 7883, G 7893, G 7883 CD,
G 7835 CD, G 7836 CD

• For narrow-necked laboratory glassware

• Clearance 170 mm*

• H 250, W 531, D 475 mm

• Powder dispensing not possible

Supplied as standard with:

• 34 nozzles (E 351) 4 x 160 mm

• 34 x clips for nozzles, 4 x 160 mm (E 353)

O 175 upper basket/injector unit
(with drying unit conneciton)

For use in G 7893, G 7883 CD, G 7835 CD,
G 7836 CD

• For narrow-necked laboratory glassware

• Clearance 170 mm*

• Connection for hot-air drying unit

• H 250, W 531, D 475 mm,
H with drying unit connection 412 mm

• Powder dispensing not possible

Supplied as standard with:

• 33 nozzles (E 351) 4 x 160 mm

• 33 x clips for nozzles, 4 x 160 mm (E 353)

O 184 upper basket/injector unit
(with drying unit connection)

For use in G 7883, G 7893, G 7883 CD,
G 7835 CD, G 7836 CD

• For items such as centrifuge tubes,
phials, test tubes for fraction collectors or
autosampler tubes

• Clearance 170 mm

• Connection for hot-air drying unit

• H 260, W 531, D 475 mm,
H with drying unit connection 468 mm

• Powder dispensing not possible

Supplied as standard with:

• 96 nozzles 2.5 x 110 mm with plastic
supports

U 175/1 lower basket/mobile injector
unit

For use in G 7836 CD

• For narrow-necked glassware

• Clearance approx. 170 mm*

• Only for use in conjunction with
O 175/O 187/O 184 upper baskets

• H 250, W 531, D 475 mm

Supplied as standard with:

• 33 nozzles (E 351) 4 x 160 mm

• 33 x clips for nozzles (E 353), 4 x 160 mm

• 1 irrigation nozzle

U 184/1 lower basket/mobile injector
unit

For use in G 7836 CD

• For items such as centrifuge tubes,
phials, test tubes for fraction collectors or
autosampler tubes

• Only for use in conjunction with
O 175/O 187/O 184 upper baskets

• Clearance approx. 170 mm

• H 250, W 531, D 515 mm

Supplied as standard with:

• 96 nozzles, 2.5 x 90 mm with plastic
supports

* Clearance may be less, depending on type of laboratory

glassware

28

Inserts for test tubes,
funnels, beakers

A 13 lid

• Replacement for E 103/1, E 104/1,
E 105/1 and E 139/1 inserts

• Stainless steel

• 1 mm wire mesh
8 mm mesh size
4 mm all-round frame

AK 12 insert 1/2

For use in G 7883, G 7893, G 7883 CD,
G 7835 CD, G 7836 CD, upper and lower
baskets

• For funnels, beakers, wide-necked
glassware, etc.

• H 67/127, W 225, D 442 mm

A 14 lid 1/4

• For AK 12 insert

• Stainless steel

• 7 x 7 mm perforations, 3 mm ridge

• H 20, W 210, D 210 mm

E 105/1 insert 1/4

For use in G 7883, G 7893, G 7883 CD,
G 7835 CD, G 7836 CD, lower basket

• As per E 103/1,
but for test tubes, max. 12 x 165 mm

• Mesh size 9 x 9 mm

• H 192 (212), W 200, D 320 mm

E 139/1 insert 1/4

For use in G 7883, G 7893, G 7883 CD,
G 7835 CD, G 7836 CD, lower basket

• As per E 103/1,
but for test tubes, max. 12 x 200 mm

• Mesh size 9 x 9 mm

• H 223 (243), W 200, D 320 mm

E 149 insert 1/4

For use in G 7883, G 7893, G 7883 CD,
G 7835 CD, G 7836 CD, upper and lower
baskets

• For 80 test tubes, max. 16 x 105 mm

• Incl. A 13 cover

• 80 sections 18 x 18 mm

• Base mesh size 8 x 8 mm

E 103/1 insert 1/4

For use in G 7883, G 7893, G 7883 CD,
G 7835 CD, G 7836 CD, upper + lower b.

• For ca. 200 test tubes, max. 12 x 75 mm

• Subdivided into 6 compartments

• Incl. A 13 cover

• Mesh size 8 x 8 mm

• H 102 (122), W 200, D 320 mm

E 104/1 insert 1/4

For use in G 7883, G 7893, G 7883 CD,
G 7835 CD, G 7836 CD, upper + lower b.

• As per E 103/1,
but for test tubes, max. 12 x 105 mm

• H 132 (152), W 200, D 320 mm

29

Inserts for Petri dishes,
watch glasses, etc.

E 118 insert 1/1

For use in G 7883, G 7893, G 7883 CD,
G 7835 CD, G 7836 CD, upper and lower
baskets

• For 38 Petri dishes 100 mm dia.

• 38 holders, Height 70 mm

• Spacing approx. 26 mm

• H 120, W 460, D 445 mm

E 136 insert 1/1

For use in G 7883, G 7893, G 7883 CD,
G 7835 CD, G 7836 CD, lower basket

• For 56 Petri dishes 100 mm dia.

• 56 holders, Height 70 mm

• Spacing approx. 26 mm

• H 145, W 485, D 445 mm

E 137 top insert 1/1 for E 136

• For 56 Petri dishes 100 mm dia.

• 56 holders, Height 70 mm

• Spacing approx. 26 mm

• H 95, W 485, D 445 mm

E 402 insert 1/2

For use in G 7883, G 7893, G 7883 CD,
G 7835 CD, G 7836 CD, upper and lower
baskets

• For 44 Petri dishes
80–125 mm dia.

• 23 holders, spacing 15 mm

• H 53, W 200, D 445 mm

E 134 insert 1/2

For use in G 7883, G 7893, G 7883 CD,
G 7835 CD, G 7836 CD, upper and lower
baskets

• For 210 slides

• 210 compartments, 26 x 11 mm
Wire gauge 3 mm

• H 73, W 200, D 445 mm

E 403 insert 1/2

For use in G 7883, G 7893, G 7883 CD,
G 7835 CD, G 7836 CD, upper and lower
baskets

• For 105 Petri dishes
50–60 mm dia.

• 36 holders, spacing 9 mm

• H 35, W 200, D 445 mm

O = Upper basket
U = Lower basket

30

E 106/2 insert 1/2

For use in G 7883, G 7893, G 7883 CD,
G 7835 CD, G 7836 CD, lower basket

• 13 spring hooks, H 175 mm, spacing
approx. 85 mm

• H 186, W 180, D 420 mm

E 106 insert 1/2

For use in G 7883, G 7893, G 7883 CD,
G 7835 CD, G 7836 CD, lower basket

• For wide-necked glassware, measuring
beakers, etc.

• 10 spring hooks, H 175 mm

• 16 spring clips, H 105 mm,
spacing approx. 60 mm

• H 186, W 195, D 430 mm

E 106/1 insert 1/2

For use in G 7883, G 7893, G 7883 CD,
G 7835 CD, G 7836 CD, upper and lower
baskets

• 26 spring hooks, H 105 mm, spacing
approx. 60 mm

• H 116, W 195, D 410 mm

E 109 insert 1/2 (illustrated)
For use in G 7883, G 7893, G 7883 CD,
G 7835 CD, G 7836 CD, lower basket

• For 21 beakers up to 250 ml

• 21 x 3 spikes

• H 155, W 230, D 460 mm

E 110 insert 1/2

For use in G 7883, G 7893, G 7883 CD,
G 7835 CD, G 7836 CD, lower basket

• For 10 beakers, 250 to 600 ml

• 10 x 3 spikes

• H 175, W 230, D 460 mm

E 111 insert 1/2

For use in G 7883, G 7893, G 7883 CD,
G 7835 CD, G 7836 CD, lower basket

• For 8 beakers, 600 to 1000 ml

• 8 x 3 spikes

• H 205, W 230, D 460 mm

E 144 insert 1/2

For use in G 7883, G 7893, G 7883 CD,
G 7835 CD, G 7836 CD, upper and lower
baskets

• For 18 beakers up to 250 ml

• 18 x 3 spikes

• H 131, W 200, D 445 mm

Inserts for wide-necked glassware

O = Upper basket
U = Lower basket

31

E 493 mobile unit

For use in G 7836 CD

• For 8 x E 494 inserts for micro-titre plates
on 4 levels

• To ensure optimum results, the lower spray
arm must be replaced with the enclosed
flange.

• Clearance from bottom upwards:
Level 1: 70 mm
Level 2: 85 mm
Level 3: 85 mm
Level 4: 90 mm

E 494 insert 1/2

• For 5 micro-titre plates

• H 35, W 205, D 480 mm

E 406 mobile injector unit

For use in G 7883

• For 116 pipettes up to 450 mm

• Compartment size 16 x 16 mm

• Complete with retaining frame, height
150 mm

• H 502, W 533, D 516 mm

E 408 mobile injector unit
(with drying unit connection)

For use in G 7893, G 7883 CD, G 7835 CD,
G 7836 CD

• As E 406 but for 96 pipettes

• Connection for hot-air drying unit

• With holder for ML/2 magnetic strip for
automatic mobile unit recognition

E 405/1 mobile injector unit with drying
connection

For use in G 7893, G 7883 CD, G 7835 CD,
G 7836 CD

• As per E 404/1

• Connection for hot-air drying unit

• With holder for ML/2 magnetic strip for
automatic mobile unit recognition

E 404/1 mobile unit

For use in G 7883

• For 38 pipettes in 3 rows:
Row 1 10 pipettes 100 ml
(length up to 550 mm), spacing 20 mm,
Row 2 14 pipettes 25 ml
Spacing 26 mm, Row 3 14 pipettes
10 ml, Spacing 26 mm

Inserts for micro-titre plates,
Mobile injector unit for pipettes

O = Upper basket
U = Lower basket

32

E 355 mobile injector unit 1/2

For use in G 7883

• For narrow-necked glassware

• One half vacant for other inserts

Supplied as standard with:

• 7 x E 351 nozzles, 4.0 x 160 mm

• 7 x E 353 clips for injector nozzles,

4.0 x 160 mm

• 9 x E 352 nozzles, 6.0 x 220 mm

• 9 x E 354 clips for injector nozzles,

6.0 x 220 mm

• 1 x irrigation nozzle for powder dispenser

E 350 mobile injector unit 1/1

For use in G 7883

• For narrow-necked glassware

Supplied as standard with:

• 15 x E 351 nozzles, 4.0 x 160 mm

• 15 x E 353 clips for injector nozzles,

4.0 x 160 mm

• 18 x E 352 nozzles, 6.0 x 220 mm

• 18 x E 354 clips for injector nozzles,

6.0 x 220 mm

• 1 x irrigation nozzle for powder dispenser

E 380 mobile injector unit 1/1
(with drying unit connection)

For use in G 7893, G 7883 CD, G 7835 CD,
G 7836 CD
As per E 350, but with 32 nozzles/clips

• Connection for hot-air drying unit

• With holder for ML/2 magnetic strip for
automatic mobile unit recognition

Supplied as standard with:

• 14 x E 351 nozzles, 4.0 x 160 mm

• 14 x E 353 clips for injector nozzles,

4.0 x 160 mm

• 18 x E 352 nozzles, 6.0 x 220 mm

• 18 x E 354 clips for injector nozzles,

6.0 x 220 mm

• 1 x irrigation nozzle for powder dispenser

Mobile injector units for narrow-necked glassware

E 385 mobile injector unit 1/2
(with drying unit connection)

For use in G 7893, G 7883 CD, G 7835 CD,
G 7836 CD

• As E 355 universal mobile unit, but with
connection for hot air drying unit

• With holder for ML/2 magnetic strip for
automatic mobile unit recognition

Supplied as standard with:

• 7 x E 351 nozzles, 4.0 x 160 mm

• 7 x E 353 clips for injector nozzles,

4.0 x 160 mm

• 9 x E 352 nozzles, 6.0 x 220 mm

• 9 x E 354 clips for injector nozzles,

6.0 x 220 mm

• 1 x irrigation nozzle for powder dispenser

33

E 340 mobile injector unit 1/2

For use in G 7883

• For narrow-necked glassware

• One half vacant for other inserts

Supplied as standard with:

• 3/3/3 nozzles, 4.0 x 140/160/180 mm

• 3/4/3 nozzles, 6.0 x 200/220/240 mm

• 1 x irrigation nozzle for powder dispenser

E 329 mobile injector unit 1/1

For use in G 7883

• For narrow-necked glassware

Supplied as standard with:

• 4/5 nozzles, 2.5 x 90/110 mm

• 5/5/5 nozzles, 4.0 x 140/160/180 mm

• 5/5/5 nozzles, 6.0 x 200/220/240 mm

• 1 x irrigation nozzle for powder dispenser

E 414 mobile injector unit 1/1
(with drying unit connection)

For use in G 7893, G 7883 CD, G 7835 CD,
G 7836 CD
As E 329 but with 37 nozzles

• Connection for hot-air drying unit

• With holder for ML/2 magnetic strip for
automatic mobile unit recognition

Supplied as standard with:

• 4/3 nozzles, 2.5 x 90/110 mm

• 5/5/5 nozzles, 4.0 x 140/160/180 mm

• 5/5/5 nozzles, 6.0 x 200/220/240 mm

• 1 x irrigation nozzle for powder dispenser

Mobile injector unit for narrow-necked glassware
Mobile unit for butyrometers

E 331 mobile injector unit 1/1

For use in G 7883, G 7893, G 7883 CD,
G 7895 CD, G 7836 CD

• For butyrometers

Supplied as standard with:

• 39 SD-B injector nozzles for
butyrometers

• 1 x irrigation nozzle for powder dispenser

SD-B injector nozzle for butyrometers

• For E 331 mobile injector unit

• L 240 mm incl. thread, 4 x 140 mm plus
welded, compressed nozzle,

1.5 x 100 mm

34

Accessories

E 336 injector sleeve MIBO

• For pipettes (max. length 445 mm) in
injector mobile units

• Plastic, with screw fitting

• Ø 11 mm

• Length 121 mm

E 362 blind stopper

• M 8 x 1 thread, to close connectors on
mobile units

E 352 injector nozzle 

• For mobile injector unit

• In conjunction with E 354

• 6 x 220 mm, screw thread

E 351 injector nozzle 

• For mobile injector unit

• In conjunction with E 353

• 4 x 160 mm, screw thread

E 354 clip for nozzle 

• For E 352 injector nozzle

• Height-adjustable

• 6 x 220 mm

E 353 clip for nozzle 

• For E 351 injector nozzle

• Height-adjustable

• 4 x 160 mm

E 470 injector nozzle with clip 

• For mobile injector unit

• 2.5 x 90 mm, screw thread

Injector nozzle with plastic support

Front row, from left

ID 160 4 x 160 mm
ID 140 4 x 140 mm
ID 110 2.5 x 110 mm
ID 90 2.5 x 90 mm

Rear row, from left

ID 240 6 x 240 mm
ID 220 6 x 220 mm
ID 200 6 x 200 mm
ID 180 4 x 180 mm

35

Accessories

A 2 cover net 1/2

• Plastic-coated metal frame with plastic
netting

• For 1/2 inserts

• 216 x 456 mm

A3 cover net 1/4

• Plastic-coated metal frame with plastic
netting

• For 1/4 inserts

• 206 x 206 mm

A 5 cover

• For O and U 184

• H 8, W 280, D 280 mm

A 11/1 insert 1/1 sub-frame

• With perforations 7 x 7 mm

• For upper or lower basket

• Stainless steel

• W 429, D 429 mm

A 12/1 insert 1/2 sub-frame

• With perforations 7 x 7 mm

• For upper or lower basket

• Stainless steel

• W 429, D 224 mm

A 6 cover net 1/2

• Stainless-steel with polypropylene mesh

• Particularly resilient and durable

• e.g. for mesh tray E 142

• 215 x 460 mm

E 319/3 insert 1/1

• Surface area filter for coarse soiling

• Contains soiling, e.g. labels from labora­tory glassware, glass splinters, etc.

• W 500, D 488 mm

O = Upper basket
U = Lower basket

36

MT Mieltrans trolley

• Trolley for storing and transporting
baskets and inserts

• 4 height-adjustable levels

• Loading dimensions
W 549 x D 599 mm

• Height-adjustment increments 102.5 mm

• 4 lockable wheels

• H 1985, W 616, D 662 mm

MC/1 Mielcar trolley

• For loading washer-disinfectors and
handling baskets and inserts

• 2 levels (sloping towards centre)

• Rail handle and docking plate

• Docking height H 640–885 mm, infinitely
adjustable

• 4 wheels, of which 2 are lockable

• H 1000, W 630, D 814 mm
(D 960 mm with docking plate in vertical
position)

For use on G 7836 CD and washer-disinfec­tors installed on 30 cm plinth

Accessories

37

Plinths

UE 30-30/60-78 plinth (top)

• For use with G 7895/1 and G 7896

• Stainless-steel plinth, bolted to machine

• H 300, W 300, D 600 mm

UE 30-60/60-78 plinth (bottom)

• For use on G 7883 and G 7893 CD

• Stainless-steel plinth, bolted to machine

• H 300, W 600, D 600 mm

UC 30-90/60-78 plinth (illustrated)

• For use with G 7883 and G 7893 in
combination with G 7895/1 or G 7896

• Stainless-steel plinth, bolted to machine

• H 300, W 900, D 600 mm

UC 30-90/70-78 plinth

• For G 7883 CD and G 7835 CD

• Stainless-steel plinth, bolted to machine

• H 300, W 900, D 700 mm

38

Accessories for dispensing liquid products

G 7896 DOS chemical supply unit

• Housing unit for DOS modules and
supply containers

• H 850 (820), W 300, D 600 mm

• Compatible with G 7883/G 7893 and
G 7835 CD

• Freestanding unit, can be built under

• Unit with removable outer door panelling
available in stainless steel or white

• Internal dimensions: H 530, W 249,
D 480 mm

• 3 levels
Level 1: Pull-out drawer on telescopic
runners for max. 3 DOS modules.
Levels 2 and 3: Pull-out drawer on tele­scopic runners with drip tray and retainer
for storage of supply containers.

DOS module G 60

•

For use on G 7883, G 7893 and
G 7835 CD

•

For liquid alkaline detergent

•

Peristaltic pump, adjustable via machine
controls

•

Siphon (333 mm) with magnetic float
switch for level-fill indicator for 5 and 10 l
containers

•

Conversion kit (No. 5 45 80 30) with long
siphon tube (10–30 l container) available
from Spares

DOS G 60/1 dispenser module

•

For use on G 7883, G 7893 and
G 7835 CD

•

Features as per DOS G 60, but with short
siphon (200 mm) for 5 l containers

DOS K 60 dispenser module

• For use on G 7883 and G 7893

• For liquid alkaline detergent

• Peristaltic pump, adjustable via machine
controls

• Integrated dispenser monitoring function
ensuring high level of process security in
compliance with EN ISO 15883

• Siphon (333 mm) with magnetic float
switch for level-fill indicator for 5 and 10 l
containers

• Conversion kit (No. 5 45 80 30) with long
siphon tube (10–30 l container) available
from Spares

DOS K 60/1 dispenser module

• For use on G 7883 and G 7893

• Features as per DOS K 60, but with short
siphon tube (200 mm) for 5 l container

DOS module G 10

• For G 7835 CD

• For liquid acidic products

• Features as per DOS G 60

DOS 2

• For G 7836 CD

• For liquid acidic products (surfactant/
neutralising agent)

• Bellows-type dispenser pump, retrofittable
by Service

DOS 4

• For G 7836 CD

• For liquid products (disinfectants/alkaline
detergents)

• Bellows-type dispenser pump, retrofittable
by Service

• The following canister sizes can be
used, L x H x W:

4 x 5 l: 245 x 145 x 225 mm*
2 x 10 l: 140 x 193 x 307 mm
2 x 10 l: 223 x 203 x 321 mm
2 x 10 l: 229 x 193 x 323 mm
2 x 10 l: 194 x 204 x 353 mm
1 x 20 l: 289 x 233 x 396 mm
1 x 25 l: 288 x 234 x 456 mm

* Only possible with DOS G 60/1 or
DOS K 60/1 dispenser with short
siphon

Illustration shows DOS K 60

Note:

The use of liquid detergent is recommend­ed in the DESIN vario TD programme.

39

RO-190 M2 reverse osmosis system

• For a continuous supply of demineralised
water

• Throughput: max. permeate capacity
190 l/h

• Stand-alone solutions for installation in
neighbouring unit

• Stainless-steel panelling

• External dimensions: H 380, W 543,
D 302 mm

• Further features and technical data as per
RO-160 M2

Optional for RO-190 M2 and RO-190 M1
(VEOLIA accessory list)

• Installation of a pre-filter

• Additional connection, e.g. for connection
of autoclave or water dispenser tap

• Pressure tank to store demineralised
water

• Connection to water softener

Indicator lights

RO-190 M2 reverse osmosis system

• For a continuous supply of demineralised
water

• Throughput: max. permeate capacity
190 l/h

• Reverse osmosis system in stainless-

steel plinth with door and floor tray

Installation of 2 x 5 l supply containers in
plinth

• 2 status LEDs (conductivity/throughflow)

• Max. yield approx. 50%
Salt filtration rate 96–98%
Water quality approx. 5–100 µS/cm
(dependent on raw water supply, typically
5–20 µS/cm)
Water connection to RO 3⁄4"
Permeate outlet 3⁄4"
Concentrate outlet 8 mm water hose
Water supply pressure 2–6 bar
Electrical connection 230 V/50 Hz
Rated load 1 kW, fuse rating 10 A
indicators
Electricity consumption: 0.6 kW/h*

• Cold water max. 28°C
max. raw water hardness 30°dGH,
15°dKH (carbonate hardness)

• Rehingeable door

• External dimensions: H 520, W 600,
D 560 mm

Accessories for reprocessing
with fully demineralised water

Single-source supplier

Water quality plays a key role in instrument
reprocessing. Raw water contains salts
and minerals which can result in deposits
on the load and on machine surfaces. Fully
demineralised water is instrumental in pre­venting instrument corrosion. In installa­tions requiring large volumes of water, re­verse osmosis installations offer an eco­nomical alternative to demineralisation
cartridges (cf. Chart on Page 41). The use
of demineralised water can increase the
economic efficiency of washer-disinfectors.
Filtration protects against deposits likely to
damage the machine, prevents downtimes
and repairs and reduces detergent costs.

The Miele range now includes the
RO-190 M1 and RO-190 M2 reverse
osmosis systems from VEOLIA.

Illustration shows washer-disinfector
with RO-190 M2 unit

Status:

Ready or Stand by

Conductivity and
throughflow
indicators:

Fault

40

LWM Module C conductivity meter

• For E 310/E 318 water demineralisation
cartridges

• H 118, W 235, D 110 mm

• Electrical connection AC 230 V 50 Hz

• 2 hoses, approx. 1.9 m,
3⁄4" threaded union

• Integrated conductivity meter
0–20 µS/cm

1.5 µS/cm = Tri-distilled water

2.5 µS/cm = Bi-distilled water

20.0 µS/cm = Single-distilled water

Accessories for reprocessing
with fully demineralised water

G 7895/1 Aqua Purificator

• For use on G 7883 and G 7893

• Housing unit for two E 310 or E 318 dem­ineralisation cartridges

• Integrated conductivity meter

• Generally recommended quality for the
final rinse < 15 µS/cm

• H 850 (820), W 300, D 600 mm

• Freestanding unit, can be built under

• Outer panelling in stainless steel or white

• Electrical connection AC 230 V 50 Hz

• Water connection:
1 x cold water, 3⁄4" threaded union
for connection of cartridge (hose approx.

1.2 m long)
1 x connection of cartridge to machine with
3⁄4" threaded union (approx. 1.2 m long),

2.5–10 bar flow pressure to cartridge
(pressure loss approx. 1 bar per cartridge)

E 310 water demineralisation cartridge,
pre-charged

• Pressure-proof stainless-steel cartridge

• H 570, Ø 240 mm

• Complete with vent and pressure relief
valve

• Contains 20 l of reusable mixed resin

Delivery capacity in litres depends on the
salt content of the raw water and the max.
acceptable conductivity.

Conductivity levels

5 µS/cm 10 µS/cm
5°dH 4250 4500
10° dH 2125 2250
15°dH 1420 1500
20°dH 1070 1125
25°dH 850 950
30°dH 710 750

The information given in this chart is
intended only as a guide.

E 318 water demineralisation cartridge,
empty

• Charged with 20 l of single-use resin

E 315 disposable resin

• 20 l homogenous, mixed-bed resins for
E 318

• Box with two 10 l bags, vacuum-packed
in plastic sacks

• Replacement filter bag

E 316 refill set

• Plastic barrel with lid and funnel

• For 30 l disposable resin

41

Demineralised water cartridge v. reverse osmosis

E 313 wall valve (above)

• For manual delivery of demineralised
water

• Pressure hose approx. 1.5 m,
pressure-proof to 10 bar

E 314 cabinet mounted valve (below)

• For manual delivery of demineralised
water

• Pressure hose approx. 1.5 m,
pressure-proof to 10 bar

Demineralised water cartridge v. reverse
osmosis

To protect instruments, Miele recommends
the use of fully demineralised water in the
final rinse cycle. Miele offers both water
demineralisation cartridges and reverse
osmosis systems. The relative benefits of
the two systems depend largely on the
number of washing and disinfecting pro­grammes run per day. In general, the high­er the requirements, the greater the likeli­hood of a reverse osmosis system being
more economical than demineralised water
cartridges.

Water demineralisation cartridge versus
reverse osmosis system

Recommend:
Water demineralisation
cartridge

Recommend:
Reverse osmosis system

Water consumption per annum

42

PG 8597 Aqua Soft system,
twin-tank water softener

• For continuous supply of softened water
for supply hardness ranges of up to
approx. 40°d (7.2 mmol/l)

• H 570, W 360, D 360 mm

• Weight (excl. salt) approx. 30 kg

• Freestanding unit on castors. Filled from
top.

• Plastic housing unit

• Throughput: Constant supply 19 l/min,
max. flow 30 l/min

• Level controlled twin-tank system

• No electrical connection required

• Equipped with 2 x 4.5 l resin-filled con­tainers and 1 container for 20 kg of salt

• Water connection:
2 pressure hoses, approx. 1.5 m,
3⁄4" threaded union
1 x cold or hot water, max. 70°C, min.
supply flow pressure 1 bar, max. static
pressure 8 bar

2.5 bar minimum flow pressure on
machines without water softener, 3.5 bar
min. flow pressure on machines with
water softener

1 x connection between system and
machine
2 hoses downstream, approx. 1.5 m
(DN 8 for reactivated water and overflow,
odour trap and non-return valve to be
provided on site.

• Water consumption 19 l/reactivation
cycle

Accessories – Demineralised water

43

44

Technical data
G 7883, G 7893, G 7883 CD

Washer-disinfectors G 7883 G 7893 G 7883 CD

Frontloading unit with bottom-hinged door, excl. baskets • • •
Freestanding unit with lid, can be built under • • –
Built-under/freestanding unit with lid – – •
Freshwater system, max. temperature 93°C • • •
Circulation pump [Qmax. l/min] 400 400 400

Controls/programmes

MULTITRONIC Novo plus/10 programmes • • •
Electric door lock • • •
Buzzer, acoustic signal at end of programme • • •
Programme continuation in event of power outage • • •
Serial interface for process documentation (SST) • (depending on model) • (depending on model) •

Water supply connection

1 x cold water, 0.5–10 bar flow pressure (50–1000 kPa) • • •
1 x cold water for steam condenser, 0.5–10 bar flow pressure (50–1000 kPa) – – •
1 x demineralised water, 0.5-10 bar flow pressure (50–1000 kPa) • (only units without ADP) • (only units without ADP) • (only units without ADP)
1 x hot water, 0.5-10 bar flow pressure (50–1000 kPa) • • •
No. of inlet hoses 1/2" with 3/4" threaded union, length approx. 1.7 m 3 3 4
Drain pump DN 22, head height 100 cm • • •
Steam condenser water drain (DN 22) – – •
Waterproof system (WPS) • • •

Electrical connection, supply lead approx. 1.7 m, 5 x 2.5 mm

2

3 N AC 400 V 50 Hz • • •
Heating [kW] 9.0 9.0 9.0
Circulation pump [kW] 0.7 0.7 0.7
Total rated load [kW] 9.7 9.7 9.7
Fuse rating [A] 3 x 16 3 x 16 3 x 16

Electrical connection for UK only
1 N AC 230 V 50 Hz, connection cable ca. 1.7 m, 3 x 4.0 mm

2

•••
Heater rating [kW] 6 6 6
Circulation pump [kW] 0.7 0.7 0.7
Total connected load [kW] 6.7 6.7 6.7
Fuse rating [A] 30 30 30
3 N AC 400 V 50 Hz, connection cable ca. 1.7 m, 5 x 2.5 mm

2

•••
Heater rating [kW] 8.5 8.5 8.5
Circulation pump [kW] 0.7 0.7 0.7
Total connected load [kW] 9.2 9.2 9.2
Fuse rating [A] 3 x 16 3 x 16 3 x 16

Connection options

DOS K 60 or DOS K 60/1 for liquid detergents/chemicals 1 1 –

G 7883/G 7893

45

Washer-disinfectors G 7883 G 7893 G 7883 CD

Dispenser systems

1 door dispenser for powder detergent • • •
1 door dispenser for liquid surfactant • • •
1 DOS 10/30 dispenser pump for liquid acidic agents • • •
1 DOS 60/30 dispenser pump for liquid detergent – – •
Drawer with 2 supply containers, 5 l each – – •

Water softener

for cold and hot water to max 70°C, Monobloc • • •

Steam condenser

Heat exchanger • (depending on model) – –
Aerosol –••

Drying unit/Radial fan

Fan motor [kW] – 0.3 0.3
Heater bank [kW] – 1.8 1.8
Total rated load [kW] – 2.1 2.1
Air throughput [m3/h] – 63.4 55
Temperature selection in 1° increments [°C] – 50–99 50–99
Time selection in 1-minute increments [min] – 1–99 1–99
Pre-filter EU 4, filter rating >95%, filter life 100 h – – •
Particulate filter/HEPA filter H 12 – • –
Filtration rate >99.5% (DIN EN 1822)/life cycle 100 h
Particulate filter/HEPA filter H 13 –•
Filtration rate >99.992% (DIN EN 1822)/life cycle 500 h

Dimensions, weight

External dimensions H/W/D (excl. lid H 820 mm) [mm] 850/600/600 850/600/600 820/900/700
Cabinet dimensions H/W/D [mm] 500/535/O=473 U=516* 500/535/O=473 U=516* 500/535/O=473 U=516*
Weight [kg] 74 78 101

External casing options

White casing, front with decor frame for decor panel (DER) • – –
Door: H 441–442/W 585–586/Thickness 1 mm,
Service panel: H 116.5–117.5/W 585–586/Thickness 1 mm
White casing, laminate lid (AW) • – –
Stainless steel (AE) • • •

Test certificates

VDE, VDE-EMC, IP X1 • • •
MDD CE 0366 – – –
DVGW •–•
WRAS •••
*O = Upper basket, U = Lower basket/• = standard, - = not available

G 7883 CD

46

Technical data
G 7835 CD, G 7836 CD

Washer-disinfectors G 7835 CD G 7836 CD

Front-loading unit with bottom-hinged door, excl. baskets • •
Built-under/freestanding unit with lid • –
Freestanding unit with lid –•
Freshwater system, max. temperature 93°C • •
Circulation pump [Qmax. l/min] 400 600

Controls/programmes

Freely programmable PROFITRONIC controls • •
Electric door lock ••
Peak-load negotiation ••
Serial interface for process documentation • •
Magnetic strip for automatic mobile unit recognition • •

Water supply connection

1 x cold water, 0.5–10 bar flow pressure (50–1000 kPa) • •
1 x cold water for steam condenser, 0.5–10 bar flow pressure (50–1000 kPa) • •
1 x hot water, 0.5–10 bar flow pressure (50–1000 kPa) • •
1 x demineralised water, 0.5–10 bar flow pressure (50–1000 kPa) • •
Feed pump for demineralised water (depending on model) • •
4 inlet hoses

1

/2" with 3/4" threaded union, length approx. 1.7 m • •
Drain pump DN 22, head height 100 cm • •
Steam condenser water drain (DN 22) • •
Waterproof system (WPS) ••

Electrical connection

3 N AC 400 V 50 Hz, supply lead approx. 1.7 m, 5 x 2.5 mm

2

••
Heating [kW] 9.0 9.0
Circulation pump [kW] 0.7 1.2
Total rated load [kW] 9.7 10.2
Fuse rating [A] 3 x 16 3 x 16

Dispenser systems

1 dispenser pump for liquid acidic agents • (peristaltic pump) • (bellows-type pump)
1 dispenser pump for liquid detergent • (peristaltic pump) • (bellows-type pump)
Drawer for 2 x 5 l supply containers • –
Drawer for 4 x 5 l supply containers – •

Connections

DOS G 10 dispenser for liquid agents (surfactant) • –
DOS G 60 or DOS G 60/1 dispenser for liquid detergent • –
DOS 2 dispenser pump for liquid agents (surfactant), – •
Bellows-type pump, retrofittable by Service
DOS 4 dispenser pump for liquid agents (disinfectant), – •
Bellows-type pump, retrofittable by Service

G 7835 CD

47

Washer-disinfectors G 7835 CD G 7836 CD

Water softener

for cold and hot water to max 70°C, Monobloc • –
for cold and hot water to max 70°C, large-capacity water softener – •

Steam condenser

Aerosol ••

Drying unit/Radial fan

Fan motor [kW] 0.3 0.3
Heater bank [kW] 2.3 2.3
Total rated load [kW] 2.6 2.6
Air throughput [m

3

/h] 55 55
Temperature selection in 1° increments [°C] 60–115 60–115
Time selection in 1-minute increments [min] 1–240 1–240
Pre-filter EU 4, filter rating > 95%, filter life 100 h • •
Particulate filter/HEPA filter H 13, filter rating > 99.992% (DIN EN 1822), filter life 500 h

••

Dimensions, weight

External dimensions H/W/D [mm] 820/900/700 1175/900/700
Cabinet dimensions H/W/D [mm]

500/535/O=473 U=516* 500/535/O=473 U=516*

Weight [kg] 114 192

Outer casing

Stainless steel (AE) ••

Test certificates

VDE, VDE-EMC, DVGW, MDD CE 0366, IP X1 • •

*O = Upper basket, U = Lower basket

• = standard, - = not available

G 7836 CD

© Miele & Cie. KG, Gütersloh / M.-Nr. 7 297 870 / All rights reserved BÖ 0958 (XX) - 03/08

Caring for the environment: this brochure is printed on
paper bleached without the use of chlorine.

Miele & Cie. KG
Carl-Miele-Straße 29, 33332 Gütersloh
Postfach, 33325 Gütersloh

www.miele-professional.com
[e-mail]

Miele worldwide:

AUSTRALIA
Miele Australia Pty. Ltd.
1 Gilbert Park Drive
Knoxfield, VIC, 3180
Tel. [phone]
Telefax +61(0)3/97 64 71 49

AUSTRIA
Miele Gesellschaft mbH.
Mielestraße 1
5071 Wals/Salzburg
Tel. [phone]
Telefax [phone]

BELGIUM
N.V. Miele S.A.

2.5 Mollem 480
Hof te Bollebeeklaan 9
1730 Mollem
Tel. [phone]
Telefax +32(0)2/451.14.14

CANADA
Miele Limited
161 Four Valley Drive
Vaughan, ON L4K 4V8
Toll free: [phone]
Tel. [phone]
Telefax [phone]

CHILE
Miele Electrodomésticos Ltda.
Av. Vitacura 3285
Vitacura
Santiago de Chile
Tel. [phone]
Telefax [phone]

CHINA
Miele Beijing Rep. Office
3W Suite 512, Oriental Plaza,
1 East Chang An Avenue
Dong Cheng District
Beijing 100738, P.R. China
Tel. [phone]
Telefax [phone]

Miele Shanghai Rep. Office
Suite 4105-06, Plaza 66
1266 Nanjing Road West
Shanghai 200040, P.R. China
Tel. [phone]
Telefax [phone]

CROATIA
Miele d.o.o.
Buzinski prilaz 32
10000 Zagreb
Tel. [phone]
Telefax +385/1/66 89 090

CZECH REPUBLIC
Miele spol. s.r.o.
Hneˇvkovského 81B, 61700 Brno
Tel. [phone]
Telefax +420(0)5/4 35 53-1 19

DENMARK
Miele A/S
2600 Glostrup, Erhvervsvej 2
Tel. [phone]
Tel. Salg/Professional
[phone]
Tel. Jylland [phone]
Telefax hovednr. [phone]
Telefax Salg/Professional
[phone]

FINLAND
Miele Oy
Porttikaari 6, 01200 Vantaa
Tel. [phone]
Telefax +358(0)9/87 59 72 99

FRANCE
Miele S.A.S.
9 avenue Albert Einstein
93151-Le Blanc-Mesnil (Paris)
Tel. [phone]
Telefax +33(0)1/49 39 44 37

GERMANY
Miele & Cie. KG
Carl-Miele-Straße 29
33332 Gütersloh
Tel. [phone] (6 ct)*
Telefax 0 800 225 57 55
*Only in Germany

GREAT BRITAIN
Miele Co. Ltd. Fairacres
Marcham Road, Abingdon
Oxon OX14 1TW
Tel. [phone]
Telefax +44(0)12 35/55 44 77

GREECE
Miele Hellas GmbH
Mesogion 257
154 51 N. Psychiko-Athen
Tel. national 01/10 6 79 44 44
international 00 30/2/10 6 79 44 44
Telefax 01/10 6 79 42 09
international 00 30/2/10 6 79 42 09

HUNGARY
Miele Kft.
Alsó Törökvész út 2.
1022 Budapest
Tel. [phone]
Telefax [phone]

HONG KONG
Miele Hong Kong Ltd.
AIA Plaza, 24th Floor,
18 Hysan Avenue,
Causeway Bay, Hong Kong
Tel. [phone]
Telefax +852/26101013

IRELAND
Miele Ireland Ltd.
Broomhill Road
Tallaght, Dublin 24
Tel. [phone]
Telefax +353(0)1/461 07-97

ITALY
Miele Italia S.r.l.
Strada di Circonvallazione, 27
39057 S. Michele-Appiano (BZ)
Tel. [phone]
Telefax +39 04 71/66 63 50

JAPAN
Miele Japan Corp.
E Space Tower 11F
3-6 Maruyamacho
Shibuya-ku Tokyo
150-0044 Japan
Tel. [phone]
Telefax [phone]

KOREA
Miele Korea Limited
Miele Haus, 607-10 Yeoksam-dong
Gangnam-gu
Seoul 135-080
Tel. [phone]
Telefax [phone]

LATVIA
Miele SIA
Kr. Valdemāra 21–621
1010 RIGA
Tel. [phone]
Telefax [phone]

LUXEMBOURG
Miele s.à r.l.
20, Rue Christophe Plantin
2339 Luxembourg
Tel. [phone]
Telefax +352/4 97 11-39

MEXICO
Miele S.A. de C.V.
Av. Santa Fé 170
German Centre 0-4-2
Col. Lomas de Santa Fé
01210, México, D.F.
Tel. [phone] and
+52/55/85 03 98 73
Telefax +52/55/85 03 98 74

NETHERLANDS
Miele Nederland B.V.
De Limiet 2, 4131 NR Vianen
Tel. [phone]
Telefax +31(0)3 47/37 84 29

NEW ZEALAND
Miele New Zealand Ltd.
Unit L, 10–20 Sylvia Park Road
Mt. Wellington, 1060 Auckland
Tel. [phone]
Telefax +64(0)9/573 1268

NORWAY
Miele AS
Løxaveien 13
1351 Rud
Tel. [phone]
Telefax +47/67 17 31 10

POLAND
Miele Sp. z. o. o.
ul. Gotarda 9
02-683 Warszawa
Tel. [phone]
Telefax +48/022/5 48 40 10

PORTUGAL
Miele Portuguesa, Lda.
Av. do Forte, 5
2790-073 Carnaxide
Tel. [phone]
Telefax +351/21/42 48-109

RUSSIA
000 Miele CIS
Leningradskij Prospekt, 39A
125167 Moscow
Tel. [phone]
Telefax [phone]

SINGAPORE
Miele Pte. Ltd.
163 Penang Road #04-02/03
Winsland House II
Singapore 238463
Tel. [phone]
Telefax +65/67 35 11 61

SLOVAKIA
Miele spol. s. r. o.
Plynàrenskà 1
82109 Bratislava
Tel. [phone]
Telefax +421/2/53 63 37 46

SLOVENIA
Miele d.o.o.
Brncˇicˇeva 41 g
1000 Ljubjana
Tel. [phone]
Telefax [phone]

SOUTH AFRICA
Miele SA (Pty) Ltd.
63 Peter Place
Bryanston 2194
Tel. [phone]
Telefax +27(0)11/5 48-19 35

SPAIN
Miele S.A.
Carretera de Fuencarral, 20
28108 Alcobendas (Madrid)
Tel. [phone]
Telefax +34/91/6 62 02 66

SWEDEN
Miele AB
Industrivägen 20
Box 1397
171 27 Solna
Tel. [phone]
Telefax +46(0)8/5 62 29-209

SWITZERLAND
Miele AG
Limmatstr. 4
8957 Spreitenbach
Tel. [phone]
Telefax +41(0)56/4 17-24 69

TURKEY
Miele Elektrikli Aletler
Dıs¸. Tic. ve Paz. Ltd. S¸ ti.
Güvercin Sokak No. 10
34330 Levent-Istanbul
Tel. [phone]
Telefax +90/2 12/3 25 84 49

UKRAINE
Miele LLC
Spaskaya St., 30 A
04070 Kiev
Tel. [phone]
Telefax [phone]

UNITED ARAB EMIRATES
Miele Appliances Ltd.
Gold & Diamond Park
Sheikh Zayed Road
Building No. 6,
Offices Nos. 214–220
Dubai
Tel. [phone]
Telefax [phone]

USA
Miele, Inc.
9 Independence Way
Princeton, NJ 08540
Tel. [phone]
Telefax 001-609/419 42 41

OTHER COUNTRIES:
Sales International
Miele & Cie. KG
Carl-Miele-Straße 29
33332 Gütersloh
Tel. [phone]
Telefax [phone]