Miele CVA2662SS User Manual

Operating and Installation Instructions

Coffee System CVA 2662

To prevent accidents and appliance damage read these instructions

before

installation or use.

en - US, CA

M.-Nr. 07 357 080

Contents

IMPORTANT SAFETY INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Guide to the coffee system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

First steps to use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Filling water and coffee capsules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Allocating various coffee types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Making coffee / espresso . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Coffee and Espresso ...............................................18

Preparing hot milk, frothed milk, and Cappuccino ........................19

After use.........................................................22

Setting serving sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

User profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Selecting a user profile .............................................25

Setting a user profile ...............................................25

Making coffee / espresso with user profiles .............................27

Setting serving sizes for user profiles ..................................27

Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Selecting a language...............................................28

Time of day ......................................................28

Setting the timer...................................................29

Steam system ....................................................31

Lighting: Adjusting the brightness.....................................31

Lighting: Setting the switch-off time....................................32

Display ..........................................................32

Volume ..........................................................33

Info (displaying No. of drinks) ........................................33

System lock ......................................................34

Water hardness ...................................................34

Restore factory default settings .......................................35

Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Overview ........................................................37

Descaling the coffee system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Removing a jammed capsule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Contents

Installation instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Caring for the environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Coffee glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

The Espresso range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

The "Pure Origin" Espresso range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

The Lungo range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances basic safety precautions should always be followed, including the following:

Read all instructions before installation or use of the coffee system.

Proper use

Please read these instructions carefully to prevent accidents and machine damage.

This appliance complies with current safety requirements. Improper use of the appliance can cause personal injury and material damage.

This coffee system is for household

use only (up to 20 cups per day), for the preparation of coffee beverages such as espresso, cappuccino, latte macchiato, etc. Do not use this machine other than for its intended use. Any other use could be hazardous.

Read this safety information carefully before operating the appliance. They contain important information on the safe installation, operation, and care of your coffee system. To avoid the risk of personal injury or damage to the coffee system, it is important that you carefully read the instructions.

Keep them in a safe place and pass them on to any future user.

Persons which lack physical,

sensory or mental abilities or experience with the machine should not use it without supervision or instruction by a responsible person.

Children

Close supervision is necessary

when any appliance is used by or near children. They could easily be scalded or burned.

Never let children play with the

coffee system.

Install the appliance in an area

where it will not be accessible to children.

IMPORTANT SAFETY INSTRUCTIONS

Technical safety

Before installing the appliance

check for externally visible damage. Do not operate a damaged appliance.

Before connecting the appliance to

the electrical supply make sure that the voltage and frequency listed on the data plate correspond with the household electrical supply. If in doubt, consult a qualified technician.

Be certain your appliance is

properly installed and grounded by a qualified technician. To guarantee the electrical safety of this appliance, continuity must exist between the appliance and an effective grounding system. It is imperative that this basic safety requirement be met. If there is any doubt, have the electrical system of the house checked by a qualified electrician.

The appliance must be properly

installed before operation to ensure that no electrical components are accessible. Ensure that power is not supplied to the appliance while installation work, repairs or maintenance is performed.

Do not use an extension cord to

connect the appliance to electricity. Extension cords do not guarantee the required safety of the appliance (danger of overheating).

This appliance must not be installed

or operated outdoors.

If the appliance is installed behind a

door front, use the appliance only when the door front is open. Do not close the door front when the appliance is in operation.

Before service or maintenance

disconnect the power supply by either removing the fuse, “tripping” the circuit breaker or unplugging the unit.

This appliance must not be used in

a non-stationary location (e.g. on a boat).

Installation work and repairs must

only be performed by a trained technician in accordance with national and local safety regulations. Repairs and other work by unauthorized persons could be dangerous and may void the warranty.

While the appliance is under

warranty repairs should only be performed by an authorized service technician. Otherwise the warranty is void.

Defective components should be

replaced by Miele original spare parts only. Only with these parts can the manufacturer guarantee the safety of the appliance.

To protect against fire, electric

shock and injury to persons do not submerge the cord or plugs in water or other liquids.

IMPORTANT SAFETY INSTRUCTIONS

Do not let the cord hang over the

edge of a table or counter, or touch hot surfaces.

Do not operate any appliance with a

damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner. Contact Miele.

Always attach the cord to the

appliance first, then plug it into the wall outlet. To disconnect, turn the machine off, then remove the plug from the wall outlet.

Never open the outer casing of the

appliance. Tampering with electrical connections or components and mechanical parts is dangerous and may cause machine damage.

If the machine is installed in

combination with other appliances, a protective base should be installed between the appliance and the unit (except for combinations with a plate warmer).

Install or locate this appliance only

in accordance with the provided installation instructions.

Use

Use only Nespresso-coffee

capsules with this machine. The use of other products will damage the appliance.

Caution! Risk of burns when dispensing hot beverages, they are extremely hot.

Caution! Do not look directly or, with an optical instrument into the lighting - laser radiation.

Do not reach into the brew unit

unless the appliance is disconnected from the power supply. Danger of injury.

The water lines must be rinsed and

the machine cleaned thoroughly before the first coffee is prepared. The cappuccinatore should also be cleaned.

Only fill the water tank with cold,

fresh tap water. Warm or hot water, or any other liquids may damage the machine. The water should be changed daily to prevent bacteria or mold growth.

Do not use deionized or mineral

water. Mineral water leads to heavy calcium buildup in the machine that can damage the unit.

Only use cold plain milk in the

cappuccinatore. Flavored milk products contain substances that can clog the machine.

IMPORTANT SAFETY INSTRUCTIONS

Do not place anything other than

Nespresso capsules un the capsule carousel.

Do not use damaged, broken or

dented capsules! They may jam in the machine and damage it.

Never place a cup with an

alcohol-coffee mixture underneath the coffee dispenser. Plastic parts of the unit could catch fire!

The hot water and steam dispensed

could cause scalding. These functions must be used carefully. Never hold any parts of the body under the steam nozzle or the hot water dispenser. The machine must never be used to clean objects.

Never use a steam cleaner to clean

the appliance. Pressurized steam could damage electrical components and cause a short circuit.

Clean the coffee system daily to

prevent bacterial growth. All parts of the coffee system are dishwasher-safe except for the capsule plate and the plastic drip tray. Failure to properly maintain machine may cause health issues.

Do not clean inside the capsule

plate opening. Danger on injury.

To avoid injuries allow the coffee

system to cool before cleaning or before putting on or taking off parts. Turn the machine off at the main switch when not in use and before cleaning.

The water in the drip tray can be

very hot. Use caution when emptying it. Danger of burns.

The coffee system must be

descaled regularly with the supplied descaling tablets. In areas with very hard water the machine needs to be descaled more often.

The capsule plate will soil more or

less depending on the coffee capsule used. Clean the capsule plate every 1 to 2 months with a cleaning tablet, available from Miele.

Only use the descaling tablets

provided by Miele and be sure to use the correct mixture of water and descaler. Otherwise appliance damage may occur.

Do not hang, lean, sit or place heavy

items on the door. The machine may be damaged.

The use of accessories not

recommended by the appliance manufacturer may result in fire, electric shock or injury to persons.

Do not reach into the perforator.

Injuries may occur.

Do not touch hot surfaces. Use

buttons or steam lever.

The appliance is designed for use

in room temperatures between 59°F and 140°F (15°C and 60°C). Do not use the appliance outside of this range of temperatures.

SAVE THESE INSTRUCTIONS AND REVIEW THEM PERIODICALLY

Guide to the coffee system

Front view

a On/Off s touch control

b Display

c Left arrow <, to scroll through program options

d OK touch control, to confirm selected program options and save settings

e Right arrow >, to scroll through program options f r Drink selection touch control to select the beverage type (coffee or

espresso)

g Door grip

h Plastic drip tray

i Metal drip tray

j Coffee dispenser

k Inset for Cappuccinatore

l Valve / Lever for steam and hot water

Interior view

Guide to the coffee system

m Main Switch

n Capsule plate (replace with descaling funnel when descaling is performed)

o Brew unit

p Capsule carousel

q Carousel tray

r Water tank

s Drip tray with grid

(with no-spill grid for transport)

t Waste container

Display

Touch controls

Select a touch control with your fingertip to use the machine.

Display

COSI o Espresso K1 K2 K3 K4 K5 L on G k C

The main menu in the display shows the following symbols:

K Up to 5 different coffee types L Steam

o Hot water n User profile for up to 9 different

users

G Maintenance program - rinse

k Maintenance program - descale

C Settings - customize appliance

^ Use < or > to select a program item

in the display. When the desired program item is highlighted, select OK.

First steps to use

Before the first use

The appliance must be correctly installed and connected before the first use. See the "Installation Instructions".

Clean the appliance and remove protective foils before the first use. See "Cleaning and Care".

Switching on

Select On/Off s to turn the coffee

system on.

The first few times the machine is turned on with the main switch a welcome screen will briefly appear in the display, followed by other messages. The welcome screen will be displayed until 5 beverages have been prepared.

Míele Welcome

During the very first use, you will be prompted to select a language.

Tap < or > until the desired language appears in the display.

Setting the clock

Tap < or > until the desired clock

format (12 or 24-hour clock) is highlighted. Confirm with OK.

Enter the time of day: Use the arrow

buttons to first set the hour. Confirm with OK.

Use the same process to set the

minutes.

Select when you would like the time

to be displayed:

"On": The time of day will be

–

displayed even if the appliance is off.

– "On for 60 seconds": When the

appliance is turned off, the time of day will remain displayed for 60 seconds.

– "Not displayed": When the

appliance is switched off, the time display immediately goes out.

^ Select OK to confirm.

Once the settings have been entered correctly, the display will show Set-up successful.

Confirm the message with OK.

Confirm by selecting OK. The desired language is now set.

First steps to use

Filling lines with water

The appliance is drained completely before leaving the factory. Before the first drink is prepared, you will need to pump water into the lines.

Place a cup under the coffee

dispenser.

Hot water K1 K2 K3 K4 K5 L o n G k C

Select Hot water o using < or >.

Confirm with OK.

^ Allow some hot water to run into a

cup.

^ Turn off the water by selecting OK

again.

The lines are now filled with water, and the appliance is ready to use.

Switching off

Select On/Off s to turn the coffee

system off.

When a coffee beverage is prepared, the unit rinses once before it switches itself off.

Filling water and coffee capsules

The appliance should be cleaned before filling it with water and coffee capsules (see "Cleaning and care").

Be sure to set the water hardness

(see "Settings - Water hardness").

Filling the water tank

The water tank should be washed and filled with fresh cold tap water before each day of use.

Never put hot water or any other

liquid except cold water into the water tank. Do not use deionized or mineral water. They may lead to heavy calcium built-up in the machine that can damage the unit.

Open the appliance door.

Lift the water tank a and pull it out

Fill the container with fresh, cold tap

water to the "Max." mark.

A valve at the tank front prevents leaks.

^ Push the water tank back into the

machine.

Filling water and coffee capsules

Filling the coffee capsule carousel

Only insert Nespresso coffee capsules in the carousel. Damaged, broken or dented capsules should not be used they may jam in the machine.

Pull the carousel tray, a, all the way

There are five chambers, each can hold four capsules. The coffee types have to be allocated to their respective chambers to get the desired coffee type. You can also fill each chamber with the same coffee type.

The chambers are factory set for a coffee type. Fill the chambers respectively or program other coffee types according to your preference. See "Allocating various coffee types".

out.

Insert the capsules into the

chambers, c of the capsule carousel b, with the flat, foil side facing down.

The capsule carousel can also be lifted up and out of the tray for easier loading.

Take care that the capsules sit loosely in the chambers so they do not jam.

^ Insert the carousel into the carousel

tray.

Push the carousel all the way into the machine.

Close the door.

The machine aligns the carousel automatically. A sound will be heard.

Removing the coffee capsules

Pull out the carousel tray and lift out the carousel.

Push the carousel ring up and take out the capsules.

Allocating various coffee types

Sixteen different Nespresso coffee types are available for this coffee system (as well as occasional "Limited Edition" blends). They differentiate in terms of acidity, fruitness, bitterness and roast. Therefore the preparing times will vary.

See "The Espresso / Lungo range" for more information on the coffee types.

Allocating the coffee types

Five different coffee types can be filled in the five chambers of the capsule carousel. The chambers can be either allocated to the desired coffee types or filled with the same coffee type in all chambers.

Settings F K1 K1 K3 K4 K5 LLn G k C

^ Select "Settings F" from the main

menu. Confirm with OK.

^ Tap an arrow button until "Allocate

type" is highlighted. Confirm with OK.

Use the arrow buttons to select "Chamber 1" (for example). Confirm with OK.

Several options are now available:

Select type

Allows you to select from the coffee types which have already been allocated.

Use < or > to select the coffee type

you wish to allocate to the selected chamber. Confirm with OK.

Rename type

Allows you to enter a new type of coffee.

^ Tap < or > until "Rename type" is

highlighted. Confirm with OK.

In the display you will see letters and numbers. Use the arrow buttons to select the desired character.

A new word will always be capitalized, and the appliance will then switch to lowercase letters.

^ Use < or > to select the desired

characters.

Confirm with OK.

You will see the selected text in the upper line of the display.

If you misspell a word, use the arrow buttons to select the trash can symbol. Confirm with OK. The last entered character will be deleted.

Allocating various coffee types

Saving an entry

When the entry is complete, use < or

> to select OK. Confirm by pressing OK again.

The menu for the chamber you are "loading" will appear in the display.

To exit the menu, use < or > to select

"back A". Confirm with OK.

Not saving an entry

If you do not wish to save an entry,

use < or > to select "back A".

Confirm with OK.

You can allocate up to 10 types of coffee. If you try to allocate more than 10 coffee types "Memory full" will appear in the display. You will need to first erase a coffee type to create space.

Once you allocate a coffee type, it will be available for use in any chamber, even if you entered it under a specific program item, for example under chamber 1.

Chamber symbols in the display

The following options will only appear once a new coffee type has been added:

Change type

This option can be used to change the type of coffee allocated to a chamber.

^ Tap < or > until "Change type" is

highlighted. Confirm with OK.

Now continue as you would in "Rename type".

Delete type

This option can be used to completely delete a coffee type.

Select "Delete type" and confirm with OK.

Use < or > to select the coffee type to be deleted.

Confirm with OK.

Once you have assigned a type of coffee to a chamber, a coffee bean

symbol K will appear in front of the

chamber number in the main menu. When you select a chamber the type of coffee allocated to that chamber will appear in the top line of the display.

If the chamber is empty,an exclamation point will appear after the bean symbol.

If the chamber has not been allocated with a type of coffee a question mark will appear after the coffee bean symbol, regardless of whether the chamber if full or empty. When the chamber is selected "Empty" will appear in the top line of the display and coffee cannot be dispensed from that chamber.

A check appears after the coffee type and it will be erased.

Clean the coffee system daily to prevent bacterial growth. All parts of the coffee system are dishwasher-safe except for the capsule plate and the plastic drip tray. Failure to properly maintain machine may cause health issues.

Rinse the water lines before preparing the first drink of the day. If the machine is still cold this will take place automatically. The heating system will heat and the water lines will be rinsed.

^ Select On/Off s to turn the machine

on.

The following message appears:

Heating-up phase

When the unit is heated, a message appears:

Making coffee / espresso

Pre-warming the cups

Pre-warming the cups allows the coffee to fully develop the flavor and aroma.

Use caution. Steam and hot water are very hot.

Place a cup under the steam / hot

water valve.

To pre-warm with hot water

Select hot water "o" using < or >.

Confirm with OK.

^ Allow some hot water run into a cup.

^ Turn off the water by selecting OK

again.

^ Leave the cup for a few seconds to

warm, then pour the water away.

To pre-warm with steam

^ Select heating with steam "L" using

<or>.

Rinsing

Water will now run out of the coffee dispenser and a noise will be heard as the carousel aligns.

The main menu then appears in the display:

COSI o Espresso K1 K2 K3 K4 K5 L on G k C

Press the steam lever down.

The steam supply is temporary. If the steam stops prematurely push the steam lever up then down again.

Push the lever up to stop the steam from dispensing.

Pour away any excess water.

Making coffee / espresso

Coffee and Espresso

Place a cup under the coffee

dispenser.

COSI o Espresso

K1 K2 K3 K4 K5 L on G k C

Use < or > to select the desired

coffee type.

Use the "Drink selection" touch

control to select Espresso or Coffee. The beverage type you have selected will appear in the upper right hand corner of the display.

^ Select OK.

The desired beverage will now be dispensed.

If you prefer to have a portion size that is larger or smaller than the pre-set sizes for coffee and espresso, see "Programming quantities - serving sizes").

Double portion

If you would like a double portion of coffee or espresso, or to prepare two portions at the same time,

select OK a second time while the

display still reads "Double portion?".

The two portions are prepared one after the other.

Interrupting preparation

Select OK when "Stop" appears in the

display.

The drink preparation will stop.

Preparing hot milk, frothed milk, and Cappuccino

This appliance includes a Cappuccinatore, which can be used to easily prepare warm milk, frothed milk, and cappuccino.

Before using the cappuccinatore for the first time, wash it either in the dishwasher or with hot water and liquid dish soap. See "Cleaning and care".

Making coffee / espresso

Pushed in: Milk is frothed into the cup

Pulled out: Milk is frothed into the

cappuccinatore

When milk is frothed in the cappuccinatore the froth is hotter and has more volume.

When frothing milk into a cup while dispensing a coffee, the steam system must be turned on. See "Settings - Steam system".

Above the handle on the cappuccinatore there is a valve a, and a milk spout b on the side.

Cold milk is best for creating froth.

The steam is regulated by turning the valve.

Left: hot milk is prepared Right: froth is prepared

Be sure not to set the valve between these two settings - this may cause the milk to splatter.

The steam supply is temporary. If the steam stops and there is not enough froth prepared, push the steam lever up then down again.

Making coffee / espresso

Frothing milk into a cup

Pre-warm the cup before filling with

froth.

Push the cappuccinatore spout all

the way into the lid.

^ Turn the valve all the way to the right.

^ Fill the cappuccinatore a no higher

than the upper mark with cold milk and cover with the lid on.

^ Place the cappuccinatore in the inset

on the drip tray, and the cup b under the spout.

^ Slowly press the steam lever down.

Preparing a cappuccino

Prepare frothed milk in a cup.

Place the cup of frothed milk under

the coffee dispenser.

^ Use the drink selection "r" touch

control to select Espresso.

^ Select OK.

Espresso now flows through the coffee dispenser and the cappuccino is ready.

The steam lever must click into the down position - otherwise the valve is not properly connected to the cappuccinatore.

Push the steam lever up when enough froth is prepared.

Making coffee / espresso

Frothing milk in the cappuccinatore

Pull the cappuccinatore spout into

the "out" position.

Turn the valve all the way to the right

for frothing.

Fill the cappuccinatore to the lower

marking a with cold milk and cover with the lid.

^ Place the cappuccinatore in the inset

on the drip tray.

^ Slowly press the steam lever down.

The steam lever must click into the down position - otherwise the valve is not properly connected to the cappuccinatore.

Heating milk

Fill the cappuccinatore to the upper

mark with cold milk and put the lid on.

Turn the valve all the way to the left

for heating.

Push the milk spout all the way in (hot

milk in the cup) or pull the milk spout out (hot milk in the cappuccinatore) and place the cappuccinatore into the recess in the drip tray.

Slowly press the steam lever down

and carefully "connect" the valve to the cappuccinatore.

^ Push the steam lever up when

enough froth is prepared.

Making coffee / espresso

Rinsing the lid

For a quick cleaning between uses of the cappuccinatore the lid can be rinsed with the steam valve.

This rinsing does not replace the cleaning of the cappuccinatore in a dishwasher.

Maintenance K1 K2 K3 K4 K5 L on G k C

Select maintenance "G" using < or

^ Select "Rinse Cappuccinatore" and

confirm with OK button.

^ Push the cappuccinatore spout "in".

^ Place an empty cup under the

cappuccinatore spout.

^ Press the steam lever down.

The following appears in the display.

After use

If you do not wish to rinse the lines automatically, they should be flushed manually before turning the machine off for the day. When a coffee beverage is prepared, the unit always rinses once before it switches itself off. For this, it is best to place a container underneath the beverage nozzle and the steam vent.

The lines can also be rinsed manually (see "Cleaning and Care" - "Rinsing the System").

Cappuccinatore being rinsed

Hot water now runs through the lid and flushes it clean. The process will stop automatically when the lid is rinsed.

+ 50 hidden pages