Microsemi Corporation SMCG6047, SMCG6047A, SMCG6048, SMCG6048A, SMCG6049 Datasheet

8700 E. Thomas Road

Scotsdale, AZ 85252

Phone: [phone]

Fax: [phone]

FEATURES:

∙BIDIRECTIONAL

∙1500 WATTS PEAK POWER

∙VOLTAGE RANGE FROM 5.5V TO 185V

∙LOW INDUCTANCE

∙LOW PROFILE PACKAGE FOR SURFACE MOUNTING

DESCRIPTION:

These Transient Voltage Suppressor devices are a series of Bi-directional Silicon Transient Suppressors used in AC applications where large voltage transients can permanently damage voltage-sensitive components.

These devices are manufactured using two silicon PN, junctions in a back to back configuration. They are characterized by their high surge capability, fast response time, and low impedance, (Ron) for clamping surge.

The SMC series, rated for 1500 watts during a one millisecond pulse, can be used to protect sensitive circuits against transients induced by lighting and inductive load switching. The response time of TAZ clamping action is less than (5x10 -9) sec; therefore, they can protect Integrated Circuits, MOS devices, Hybrids, and other voltage-sensitive semiconductors and components. This series of devices has also been proven very effective as EMP and ESD suppressors.

MAXIMUM RATINGS:

1500 watts of peak pulse power dissipation at 25°C tclamping (0 volts to V(BR) min): less than 5 x 10-9 seconds Operating and Storage Temperature: -65° to +150°C

Steady state power dissipation: 5.0 watts at TL = 25°C, at mounting plane.

Repetition rate (duty cycle): .01%

	- kW	100
					(Wave Form - See
					Figure 2)
	Pulse Power				NonRepetitive
		10
		1.0
	Peak
	PP	0.1
	P		1µs
		100ns		10µs	100µs	1ms	10ms

tp Pulse Time Figure 1

Peak Pulse Power vs Pulse Time

SMCG/J6036 thru SMCG/J6072A

5.5 thru 185 Volts

1500 Watts

Transient Voltage

Suppressors

DO-214AB	DO-215AB
Mechanical
Characteristics

CASE: Molded, Surface

Mountable.

TERMINALS: Gull-wing or C-Bend (modified J-bend) leads, tin lead plated

POLARITY: No markings on bi-directional devices.

PACKAGING: 16mm tape (See EIA Std. RS-481.)

THERMAL RESISTANCE: 20°C/W

(typical) junction to lead (tab) at mounting plane.

MSC1364.PDF 01/06/00

											SMCG/J6036
											thru
											SMCG/J6072A
ELECTRICAL CHARACTERISTICS @ 25°c
	MICROSEMI	MICROSEMI	Rated	BREAKDOWN				MAXIMUM	MAXIMUM		PEAK	Maximum
	PART	PART	Stand-Off		VOLTAGE			CLAMPING	STANDOFF		PULSE	Temperature
	NUMBER	NUMBER	Voltage		V(BR) @ IT			VOLTAGE	C U R R E N T		CURRENT	Coefficient
			VRM					VC @ IPP	ID @ VRM		(See Fig. 2)	αV(BR)
	MODIFIED	MODIFIED			VOLTS
											IPP
	"G"	"J"	(See Note 1)					(1 mSEC)
	BEND LEAD	BEND LEAD
			VOLTS	MIN		MAX	mA	VOLTS	μA		A	%/°C
	SMCG6036	SMCJ6036	5.5	6.75		8.25	10	11.7	1000		128	.061
	SMCG6036A	SMCJ6036A	6.0	7.13		7.88	10	11.3	1000		132	.061
	SMCG6037	SMCJ6037	6.5	7.38		9.02	10	12.5	500		120	.065
	SMCG6037A	SMCJ6037A	7.0	7.79		8.61	10	12.1	500		124	.065
	SMCG6038	SMCJ6038	7.0	8.19		10.00	10	13.8	200		109	.068
	SMCG6038A	SMCJ6038A	7.5	8.65		9.55	10	13.4	200		112	.068
	SMCG6039	SMCJ6039	8.0	9.0		11.0	1	15.0	50		100	.073
	SMCG6039A	SMCJ6039A	8.5	9.5		10.5	1	14.5	50		103	.073
	SMCG6040	SMCJ6040	8.5	9.9		12.1	1	16.2	10		93	.075
	SMCG6040A	SMCJ6040A	9.0	10.5		11.6	1	15.6	10		96	.075
	SMCG6041	SMCJ6041	9.0	10.8		13.2	1	17.3	5		87	.078
	SMCG6041A	SMCJ6041A	10.0	11.4		12.6	1	16.7	5		90	.078
	SMCG6042	SMCJ6042	10.0	11.7		14.3	1	19.0	5		79	.081
	SMCG6042A	SMCJ6042A	11.0	12.4		13.7	1	18.2	5		82	.081
	SMCG6043	SMCJ6043	11.0	13.5		16.5	1	22.0	5		68	.084
	SMCG6043A	SMCJ6043A	12.0	14.3		15.8	1	21.2	5		71	.084
	SMCG6044	SMCJ6044	12.0	14.4		17.5	1	23.5	5		64	.086
	SMCG6044A	SMCJ6044A	13.0	15.2		16.8	1	22.5	5		67	.068
	SMCG6045	SMCJ6045	14.0	16.2		19.8	1	26.5	5		56.5	.088
	SMCG6045A	SMCJ6045A	15.0	17.1		18.9	1	25.2	5		59.5	.088
	SMCG6046	SMCJ6046	16.0	18.0		22.0	1	29.1	5		51.5	.090
	SMCG6046A	SMCJ6046A	17.0	19.0		21.0	1	27.7	5		54	.090
	SMCG6047	SMCJ6047	17.0	19.8		24.2	1	31.9	5		47	.092
	SMCG6047A	SMCJ6047A	18.0	20.9		23.1	1	30.6	5		49	.092
	SMCG6048	SMCJ6048	19.0	21.6		26.4	1	34.7	5		43	.094
	SMCG6048A	SMCJ6048A	20.0	22.8		25.2	1	33.2	5		45	.094
	SMCG6049	SMCJ6049	21.0	24.3		29.7	1	39.1	5		38.5	.095
	SMCG6049A	SMCJ6049A	22.0	25.7		28.4	1	37.5	5		40	.096
	SMCG6050	SMCJ6050	24.0	27.0		33.0	1	43.5	5		34.5	.097
	SMCG6050A	SMCJ6050A	25.0	28.5		31.5	1	41.4	5		36	.097
	SMCG6051	SMCJ6051	26.0	29.7		36.3	1	47.7	5		31.5	.098
	SMCG6051A	SMCJ6051A	28.0	31.4		34.7	1	45.7	5		33	.098
	SMCG6052	SMCJ6052	29.0	32.4		39.6	1	52.0	5		29	.099
	SMCG6052A	SMCJ6052A	30.0	34.2		37.8	1	49.9	5		30	.099
	SMCG6053	SMCJ6053	31.0	35.1		42.9	1	56.4	5		26.5	.100
	SMCG6053A	SMCJ6053A	33.0	37.1		41.0	1	53.9	5		28	.100
	SMCG6054	SMCJ6054	34.0	38.7		47.3	1	61.9	5		24	.101
	SMCG6054A	SMCJ6054A	36.0	40.9		45.2	1	59.3	5		25.3	.101
	SMCG6055	SMCJ6055	38.0	42.3		51.7	1	67.8	5		22.2	.101
	SMCG6055A	SMCJ6055A	40.0	44.7		49.4	1	64.8	5		23.2	.101
	SMCG6056	SMCJ6056	41.0	45.9		56.1	1	73.5	5		20.4	.102
	SMCG6056A	SMCJ6056A	43.0	48.5		53.6	1	70.1	5		21.4	.102
	SMCG6057	SMCJ6057	45.0	50.4		61.6	1	80.5	5		18.6	.103
	SMCG6057A	SMCJ6057A	47.0	53.2		58.8	1	77.0	5		19.5	.103

MSC1364.PDF 01/06/00