Medion MD 40983 user Manual

CD-Porty_MD40983_UK.FH11 Wed May 19 11:40:15 2004 Seite 1

FUNCTIONS

6
5
4

3

2

1

PROG.

17

MODE

ACCESSORIES SUPPLIED

Adapter cable for Stereo earphones
cigarette lighter

BBS

ESP

7

Mains adapter

Audio adapter cassette

LINE OUT Connecting cable Furthermore:

Pouch
Velcro fastener
Operating instructions

DV IN 4.5 V

®

PHONE

*VOLUME

141516

CHARGE

ON OFF

8

9

10
11

1213

1 (side of unit): Charge display

2 (side of unit): HOLD key lock

3 PROGRAM Programming function

4 MODE Playback function

5 ESP Anti shock

6 BBS Bass adjustment

7 LCD Display

8 SKIP/SEARCH Search function backward

9 SKIP/SEARCH Search function forward

10 STOP

11 PLAY/PAUSE Playback/pause

12 LINE OUT Connecting jack

13 CHARGE ON - OFF:

Charge rechargeable batteries

14 VOLUME Volume control

15 PHONE Headphone jack

16 DC 4.5 V Connecting jack (mains adapter)

17 OPEN CD Open CD compartment

INSERTING BATTERIES / RECHARGING RECHARGEABLE BATTERIES
IN THE CD PLAYER

Open the lid of the battery
compartment of the CD Player.

Inserting the batteries Insert two
batteries R6/LR6 "AA" (not supplied)
while observing the polarity. The
negative pole connects to the spring!

Close the battery compartment again.

During battery operation, the CHARGE button must be switched OFF!
While charging normal batteries, there is an EXPLOSION HAZARD!

Recharging rechargeable batteries:

Insert two NiCd rechargeable batteries 1.2 V as described above.

Connect the mains adapter.

Turn ON the CHARGE button on the device. The
charge display flashes.

After some 15 hours the discharged rechargeable
batteries are fully charged.

Turn OFF the CHARGE button.

Batteries

Batteries

Rechargeable batt.

Rechargeable batt.

2

CD-Porty_MD40983_UK.FH11 Wed May 19 11:40:15 2004 Seite 2

Portable
CD Player

SAFETY INSTRUCTIONS

Please read and observe the safety instructions to avoid health risk during use as intended. Improper connection
of the device may damage the device or peripheral equipment.

GENERAL
Keep these operating instructions always at hand.
Heed all warnings labelled onto the device and specified in the operating instructions.
Do not allow children to play with electrical equipment without supervision.

AMBIENT CONDITIONS
Protect the device against humidity and heat.
Make sure that no foreign bodies or fluids get into the device.
Do not expose the device to dripping water or splash water.
Take care that the ventilation of the power supply unit is not obstructed by objects such as curtains.

06/04

Medion Electronics Ltd.

120 Faraday Park  Faraday Road

Dorcan  Swindon SN3 5JF  Wilts.

Hot-Line 0870 7270370

Fax [phone]

E-Mail: [e-mail]

MD 40983

Operating Instructions

POWER SUPPLY
Connect the mains adapter always to a mains socket 230 V ~ 50 Hz which is easily accessible.
The DC output of the mains adapter must be connected exclusively to the DC input jack of the device.
Use only the mains adapter supplied. Never attempt to connect the mains adapter to other jacks, as this could lead to

serious damage.

CHARGING OPERATION
Only charge NiCd batteries of size R6/ LR6/ AA.
Never attempt to recharge non-chargeable batteries (explosion hazard!).

CAR CONNECTION
When connecting the car adapter, observe the voltage and polarity indicated.
The car adapter supplied should only be used with a fuse T 1A L.

CD PLAYER
The CD player is a Class 1 laser product.
The unit is equipped with a safety system preventing the emergence of dangerous laser beams

during operation as intended. Never manipulate or damage the safety system of the device to avoid
any eye injuries.

MALFUNCTIONING
If the mains adapter, the connection cable or the device is damaged, unplug the mains adapter from the mains socket

immediately.
Under no circumstances should you attempt to open or repair this device on your own.
Refer all servicing to our Service Centre or another qualified service shop.

ENVIRONMENTAL PROTECTION
Defective NiCd rechargeable batteries and discharged batteries should not be disposed of with household

waste, but at the designated collection points.

When using the Velcro fastener, make sure that the adhesive surfaces are clean and dry.
No liability can be assumed for any possibly occurring damage when removing the self-adhesive

Velcro fastener.

Please unfold!