McIntosh MPC1500 Brochure
MPC1500
legendary
POWER CONTROLLER
Today’s AC power is littered with by product from the operation of millions of personal
computers, satellite set-top boxes and myriad other noise inducing devices. The new
MPC1500 Power Controller, the first-ever such product from McIntosh, provides total
isolation, low noise, and maximum power transfer to enable the best performance
possible from your McIntosh components.
The MPC1500 improves the performance of your system by removing this AC line
noise, thus maximizing the operating efficiency of all connected components. The
MPC1500 features silent, transformer-based noise suppression. Additionally, a surge
suppression circuit is quick acting, high current capable, and stable over time for
the best possible protection.
A trademark glass front panel features Fiber Optic Illumination with two custom meters
for instant recognition of current and voltage. The MPC1500 protects your valuable
components, increases system performance and simplifies AC power connection
all in one easy to use, well-appointed product.
“...enable the best
performance possible
from your McIntosh
components”
6 Medical-Grade Duplex Outlets
1,350 Watt, 11.2 Amp Capacity
Supports McIntosh Power Control
and 12V Trigger
Total System Control
Front Panel Illumination may be
Switched Off for Theater Use
M PC1500
POWER CONTROLLER
tRansFORMeR-Based
nOise suPPRessiOn
The MPC1500 employs a large torroidal
transformer that has been specially
wound to act as a low pass filter to
remove unwanted harmonic noise on
the incoming AC line as well as noise
from electric motors, lighting dimmers,
and other sources of interference
found in the home.
HigH CuRRent design
Six medical-grade duplex outlets allow
for the connection of up to 12 separate
components. Total current draw for all
components is 1,350 Watts, 11.2 Amps,
and total current is available through
any single duplex outlet.
PROgRaMMaBle Outlets
Choose between always on, switch outlets
on one at a time, or switch outlets on in
groups for total system flexibility.
12 VOlt tRiggeR
Three 12V trigger outputs are included for
easy interface of your McIntosh system
with a wide range of other components.
OutPut VOltage
120 Volts AC Nominal
lOad RegulatiOn
± 2.5 %
POweR RequiReMents
120 Volts, 60Hz
12.0 Amps, maximum current
1440 Watts, maximum power
OVeRall diMensiOns (H x w x d)
7-5/8” (19.37cm) x 17-1/2” (44.45cm)
x 22” (55.88cm) including
the Front Panel, Knobs and Cables
weigHt
87 lbs. (39.46 kg) net,
105 lbs. (47.63 kg) in shipping carton
sHiPPing CaRtOn diMensiOns (H x w x d)
17” (43.2 cm) x 29-1/2“ (74.9 cm) x 29“ (73.7cm)
FOR tHe COnsuMeR’s
PROteCtiOn
In order to ensure the highest level of
customer satisfaction, “new” McIntosh
products may only be purchased over-thecounter or delivered and installed by an
Authorized McIntosh Dealer.
McIntosh products that are purchased
over the Internet, by phone or mail order
are presumed to be “used” and do
not qualify for any McIntosh Warranty.
McIntosh does not warrant, in any
way, products that are purchased from
anyone who is not an Authorized Dealer
or products that have had their serial
number altered or defaced.
To experience the legendary performance of McIntosh, please call on us at 1-800-538-6576
35011100 MPC1500
www.mcintoshlabs.com
Loading...