MDLP2
VIDEO PROJECTOR
The MDLP2 Video Projector by McIntosh delivers stunning new technologies designed
to raise the bar for image quality. Utilizing a 1080p DarkChip 4 DLP engine, the MDLP2
boasts an incredible contrast ratio of 15,000:1. Additionally, the new Dual Iris Optical
System with independent motorized control works to improve response during
difficult scene transitions.
The DarkChip employed by the MDLP2 is a 16 x 9 device and as such matches the
1920 x 1080 HD picture, pixel by pixel. As a result, 16 x 9 images are displayed at
their native rate using 100% of the light engine pixels, allowing pure HD sources to
be projected without the need to manipulate the signal in any way resulting in the
purest most accurate picture possible.
Custom Konica Minolta optics yield a picture which is tightly focused from side to side,
top to bottom and out to each corner. Mechanical lens shifting allows for proper image
placement with the projector mounted at either the top or bottom of the projected
image for the ultimate in flexibility; perfect focus is achieved without the use of clarity
robbing keystone adjustments. The MDLP2 is shipped with either the Medium Throw
Lens for distance settings of 1.27 through 1.85 times the 16 x 9 screen width, or the
Long Throw Lens for distance settings of 1.85 through 2.78 times the 16 x 9 screen width.
“raising the bar
for image quality...”
Premium Konica Minolta
Optical System
HDMI Ver 1.3a with DeepColor™
Capability
2 HDMI Inputs
1920 x 1080, 16 x 9 Digital 1080p
DarkChip® 4 Single Chip
2 Component Inputs
Floor, Ceiling, Front or Rear
Screen Operation Modes
Max. 6x Speed, 7 Segments
SilentWheel™ Color Wheel
with 3 Selectable Speeds
850 ANSI Lumen Brightness
Four Picture Modes
Five Built-In Preset Gamma Levels
15000:1 Contrast ratio
Lens Shifting
2000 Hour Lamp Life
MDLP2
OPTICAL CHARACTERISTICS PANEL
0.8” 16:9, 1920 x 1080 pixels Digital
Micromirror Device
LAMP
Super High Pressure 200W DC
LENS
F: 30.7 - 44.5mm (Medium Throw)
44.5 - 66.75 (Long Throw) F: F3.0 / F6.0
PROJECTION SIZE
70 to 250 inches (Medium Throw)
80 to 300 Inches (Long Throw)
INPUT/OUTPUT COMPONENT IN
3-RCA x 2: Y, CB/PB, CR/PR
HDMI IN
HDMI x 2; HDMI 1.3a Compliant
DATA IN
1/8” Mini Jack
POWER CONTROL IN
1/8” Mini Jack, 5V-12V
POWER CONTROL OUT
1/8” Mini Jack, 5V
AC IN
3 Prong Grounding Type
VIDEO PROJECTOR
RS-232C
RS-232C Receptacle
GENERAL POWER REQUIREMENTS
AC 100 –120V / 220 – 240V, 50/60Hz
POWER CONSUMPTION
Less than 350 W
STAND-BY CONSUMPTION
Less than 0.3W (AC 100-120V)
Less than 0.5W (AC 220-240V)
OPERATING TEMPERATURE
41° F (5°C) to 95° F (35°C)
OPERATING HUMIDITY
30% to 85%
OVERALL DIMENSIONS (H x W x D)
Height: 6-3/4” (17.2cm) with feet retracted;
9-1/2” (17.2cm) with feet extended
Width: 20-1/4” (51.4cm) 19-1/16” (50.1cm)
Depth: 18-3/16” (47.8cm) with medium throw
lens and 19-1/16” (48.4cm) with long throw lens
WEIGHT
40 lbs. (18.2kg) net,
54 lbs. (24.5kg) in shipping carton
CEILING MOUNT
Ceiling mount hardware is included
with the MDLP2.
WORLDWIDE VIDEO
FORMAT SUPPORT
Video sources from around the world,
NTSC, PAL and SECAM are supported.
When in the Automatic Mode the
MDLP2 will lock onto and display
any video source including all
HD sources without the need for
extraneous video conversion steps.
TRADITIONAL McINTOSH
GLASS PANEL APPEARANCE
The traditional McIntosh glass panel
is used for set mounted operational
controls. Illuminated McIntosh logo
may be left illuminated or turned off
as desired. The custom designed
projector housing enhances the
MDLP2 appearance as well as
muting sound for quiet operation.
COMPANION PRODUCTS
The VP1000 Video Processor and
McIntosh Preamp/Processors are
logical companions for the MDLP2.
Your Authorized Dealer can provide
additional information on other
McIntosh product combinations.
FOR THE CONSUMER’S
PROTECTION
In order to ensure the highest level of
customer satisfaction, “new” McIntosh
products may only be purchased overthe-counter or delivered and installed
by an Authorized McIntosh Dealer.
McIntosh products that are purchased
over the Internet, by phone or mail order
are presumed to be “used” and do not
qualify for any McIntosh Warranty.
McIntosh does not warrant, in any way,
products that are purchased from anyone
who is not an Authorized Dealer or
products that have had their serial
number altered or defaced.
TRIG. 1 OUT, TRIG. 2 OUT
1/8” Mini Jack x 2
Output: DC12V or 0V
To experience the legendary performance of McIntosh, please call on us at 1-800-538-6576
35010600 MDLP2
www.mcintoshlabs.com