Makita UH200DWEX, UH200DW Manual
instructions) (Original ENGLISH
INSTRUCTION MANUAL
Cordless Hedge Trimmer
UH200D
010965
IMPORTANT: Read Before Using.
ENGLISH (Original instructions)
SPECIFICATIONS
Model |
UH200D |
Blade length |
200 mm |
Strokes per minute (min-1) |
1,250 |
Overall length |
460 mm |
Net weight |
1.2 kg |
Rated voltage |
D.C. 10.8 V |
•Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
•Specifications and battery cartridge may differ from country to country.
•Weight according to EPTA-Procedure 01/2003
END011-3
Symbol
The following show the symbols used for the equipment. Be sure that you understand their meaning before use.
|
|
Take particular care and attention. |
|
||
|
|
|
Read instruction manual. |
|
|
|
|
Do not expose to rain. |
|
||
|
|
Danger; be aware of thrown objects. |
|||
|
|
|
Keep bystanders away. |
|
|
|
|
|
|||
|
|
Cutting means continues to run after the |
|||
|
|
||||
|
|
|
motor is switched off. |
|
|
|
Cd |
Only for EU countries |
|
||
|
Ni-MH |
|
|||
|
Li-ion |
|
Do not dispose of electric equipment or |
||
|
|
|
battery pack together with household |
||
|
|
|
waste material! |
|
|
|
|
|
In observance of European Directive |
||
|
|
|
2002/96/EC on waste electric and |
||
|
|
|
electronic equipment, 2006/66/EC |
on |
|
|
|
|
batteries and accumulators and waste |
||
|
|
|
batteries and accumulators and their |
||
|
|
|
implementation |
in accordance |
with |
|
|
|
national laws, |
electric equipment |
and |
battery pack that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility.
ENE014-1
Intended use
The tool is intended for trimming hedges.
ENG104-2
Wear ear protection.
ENG244-1
Vibration
The vibration emission value determined according to EN60745 :
Vibration emission (ah) : 2.5 m/s2 or less Uncertainty (K) : 1.5 m/s2
ENG901-1
•The declared vibration emission value has been measured in accordance with the standard test method and may be used for comparing one tool with another.
•The declared vibration emission value may also be used in a preliminary assessment of exposure.
WARNING:
•The vibration emission during actual use of the power tool can differ from the declared emission value depending on the ways in which the tool is used.
•Be sure to identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time).
ENH021-5
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible manufacturer declare that the following Makita machine(s):
Designation of Machine:
Cordless Hedge Trimmer
Noise
The typical A-weighted noise level determined according to EN60745:
Sound pressure level (LpA) : 73.7 dB(A) Uncertainty (K) : 2.5 dB(A)
The noise level under working may exceed 80 dB (A).
Model No./ Type: UH200D
Specifications: see "SPECIFICATIONS" table. are of series production and
Conforms to the following European Directives:
2000/14/EC, 2006/42/EC
2
And are manufactured in accordance with the following standards or standardised documents:
EN60745
The technical documentation is kept by our authorised representative in Europe who is:
Makita International Europe Ltd, Michigan, Drive, Tongwell,
Milton Keynes, MK15 8JD, England
The conformity assessment procedure required by Directive 2000/14/EC was in Accordance with annex V. Measured Sound Power Level: 81.8dB
Guaranteed Sound Power Level: 84dB
27.8.2009
000230
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, JAPAN
GEA006-2
General Power Tool Safety Warnings
WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
Work area safety
1.Keep work area clean and well lit. Cluttered or dark areas invite accidents.
2.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
3.Keep children and bystanders away while
operating a power tool. Distractions can cause you to lose control.
Electrical safety
4.Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
5.Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
6.Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
7.Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
8.When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
9.If operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter (GFCI) protected supply. Use of an
GFCI reduces the risk of electric shock.
Personal safety
10.Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
11.Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
12.Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
13.Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
14.Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
15.Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
16.If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
Use of dust collection can reduce dust-related
3
hazards. |
cause irritation or burns. |
Power tool use and care |
Service |
17.Do not force the power tool. Use the correct 28. Have your power tool serviced by a qualified
power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
18.Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
19.Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
20.Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
21.Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
22.Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
23.Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power
tool for operations different from those intended could result in a hazardous situation.
Battery tool use and care
24.Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
25.Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
26.When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
27.Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may
repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
29.Follow instruction for lubricating and changing accessories.
30.Keep handles dry, clean and free from oil and grease.
GEB062-2
CORDLESS HEDGE TRIMMER SAFETY WARNINGS
1.Hold the power tool by insulated gripping surfaces only, because the cutter blade may contact hidden wiring. Cutter blades contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock.
2.Keep all parts of the body away from the cutter blade. Do not remove cut material or hold material to be cut when blades are moving. Make sure the switch is off when clearing jammed material. A moment of inattention while operating the hedge trimmer may result in serious personal injury.
3.Carry the hedge trimmer by the handle with the cutter blade stopped. When transporting or storing the hedge trimmer always fit the cutting device cover. Proper handling of the hedge trimmer will reduce possible personal injury from the cutter blades.
4.Do not use the hedge trimmer in the rain or in wet or very damp conditions. The electric motor is not waterproof.
5.First-time users should have an experienced hedge trimmer user show them how to use the trimmer.
6.The hedge trimmer must not be used by children or young persons under 18 years of age. Young persons over 16 years of age may be exempted from this restriction if they are undergoing training under the supervision of an expert.
7.Use the hedge trimmer only if you are in good physical condition. If you are tired, your attention will be reduced. Be especially careful at the end of a working day. Perform all work calmly and carefully. The user is responsible for all damages to third parties.
8.Never use the trimmer when under the influence of alcohol, drugs or medication.
9.Check to make sure that the voltage and frequency of the power supply correspond to the specifications given on the identification plate. We
4
recommend the use of a residual-current-operated circuit breaker (ground-fault circuit interrupter) with a tripping current of 30 mA or less, or an earth leakage current protector.
10.Work gloves of stout leather are part of the basic equipment of the hedge trimmer and must always be worn when working with it. Also wear sturdy shoes with anti-skid soles.
11.Before starting work check to make sure that the trimmer is in good and safe working order. Ensure guards are fitted properly. The hedge trimmer must not be used unless fully assembled.
12.Make sure you have a secure footing before starting operation.
13.Hold the tool firmly when using the tool.
14.Do not operate the tool at no-load unnecessarily.
15.Immediately switch off the motor and remove the battery cartridge if the cutter should come into contact with a fence or other hard object. Check the cutter for damage, and if damaged repair immediately.
16.Before checking the cutter, taking care of faults, or removing material caught in the cutter, always switch off the trimmer and remove the battery cartridge.
17.Switch off the trimmer and remove the battery cartridge before doing any maintenance work.
18.When moving the hedge trimmer to another location, including during work, always remove the battery cartridge. Never carry or transport the trimmer with the cutter running. Never grasp the cutter with your hands.
19.Clean the hedge trimmer and especially the cutter after use, and before putting the trimmer into storage for extended periods. Lightly oil the cutter and put on the cover. The cover supplied with the unit can be hung on the wall, providing a safe and practical way to store the hedge trimmer.
20.Store the hedge trimmer with the cover on, in a dry room. Keep it out of reach of children. Never store the trimmer outdoors.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to safety rules for the subject product. MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury.
GEB070-2
CORDLESS GRASS SHEAR SAFETY WARNINGS
WARNING! IMPORTANT READ CAREFULLY all safety warnings and all instructions BEFORE USE .
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
General instructions
1.To ensure correct operation, user has to read this instruction manual to make himself familiar with the handling of the equipment. Users insufficiently informed will risk danger to themselves as well as others due to improper handling.
2.Never allow people unfamiliar with these instructions, people (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge to use the equipment. Local regulations can restrict the age of the operator.
3.Use the equipment with the utmost care and attention.
4.Operate the equipment only if you are in good physical condition. Perform all work calmly and carefully. Use common sense and keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or their property.
5.Never operate the machine while people, especially children, or pets are nearby.
6.Never use the equipment after consumption of alcohol or drugs, or if feeling tired or ill.
7.The motor is to be switched off immediately in case that the equipment shows any problem or abnormal sign.
8.Switch off and remove the battery cartridge when resting and when leaving the equipment unattended, and place it in a safe location to prevent danger to others or damage to the equipment.
9.Don't force the equipment. it will do the job better and with less likelihood of a risk of injury at the rate for which it was designed.
10.Don't overreach. Keep proper footing and balance at all times.
Personal protective equipment
1.Dress Properly. The clothing worn should be functional and appropriate, i.e. it should be tight-fitting but not cause hindrance. Do not wear either jewelry or clothing which could become
5
entangled. Wear protective hair covering to contain long hair.
2.Wear eye protection and stout shoes at all times while operating the machine.
Electrical and battery safety
1.Avoid dangerous environment. Don't use the equipment in damp or wet locations or expose it to rain. Water entering an equipment will increase the risk of electric shock.
2.Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
3.Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
4.When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
5.Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
6.Do not dispose of the battery(ies) in a fire. The cell may explode. Check with local codes for possible special disposal instructions.
7.Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.
Starting up the equipment
1.Make sure that there are no children or other people nearby, also pay attention to any animals in the working vicinity. Otherwise stop using the equipment.
2.Before use always check that the equipment is safe for operation. Check the security of the cutting tool and the guard and the switch trigger/lever for easy and proper action. Check for clean and dry handles and test the function of the start/stop.
3.Check damaged parts before further use of the equipment. A guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other condition that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by our
authorized service center unless indicated elsewhere in this manual.
4.Switch on the motor only when the hands and feet are away from the cutting tool.
5.Before starting make sure that the cutting tool has no contact with any objects.
Method of operation
1.Only use the equipment in good light and visibility. During the winter season beware of slippery or wet areas, ice and snow (risk of slipping). Always ensure a safe footing.
2.Take care against injury to feet and hands from the cutting tool.
3.Never stand on a ladder and run the equipment.
4.Never climb up into trees to perform cutting operation with the equipment.
5.Never work on unstable surfaces.
6.Remove sand, stones, nails etc. found within the working range. Foreign particles may damage the cutting tool and can cause dangerous kick-backs.
7.Should the cutting tool hit stones or other hard objects, immediately switch off the motor and inspect the cutting tool.
8.Inspect the cutting tool at short regular intervals for damage (detection of hairline cracks by means of tapping-noise test).
9.Before commencing cutting, the cutting tool must have reached full working speed.
10.The cutting tool has to be equipped with the appropriate guard. Never run the equipment with damaged guards or without guards in place!
11.All protective installations and guards supplied with the equipment must be used during operation.
12.Always remove the battery cartridge from the equipment:
−whenever leaving the equipment unattended;
−before clearing a blockage;
−before checking, cleaning or working on the equipment;
−after striking a foreign object;
−whenever the equipment starts vibrating abnormally.
13.Always ensure that the ventilation openings are kept clear of debris.
Cutting Tools
1.Employ only the correct cutting tool for the job in hand.
Maintenance instructions
1.The condition of the equipment, in particular of the cutting tool of the protective devices must be checked before commencing work.
2.Turn off the motor and remove the battery cartridge before carrying out maintenance,
6
Loading...