LINAK LA30 DATA SHEET
PRODUCT DATA SHEET
cy
ng)
ng
ACTUATOR
LA30
Features:
• 12/24V DC permanent magnet motor
• Max. thrust up to 6000 N (LA30LK)
• Stainless steel piston rod
• Elegant and compact construction with small
installation dimensions
• Protection class: IP51 / IP66
• Colour: black
• Speed max. 65 mm/s (LA30 S-motor with 12 mm
pitch)
• Low noise level
• Steel construction for all bearing parts
• Acme thread spindle for optimum efficiency
Options:
• Extra powerful motor (S-motor)
• L-motor for system actuator
• IP66 (by ordering LA30 with plastic housing)
• Double-acting brake - increased self-locking
ability (LA30 with 6 or 9 mm pitch + LA30 S-motor
with 6 or 9 mm pitch and LA30L) which ensures
that all these types are fully self-locking
• Potentiometer for positioning the actuator. 0-1 K
ohm, 0-5 K ohm or 0-10 K ohm
• Optical encoder for positioning the actuator. 10
pulses pr. spindle revolution
• Reed switch (only LA30 L-motor versions): 8 pulses
pr. spindle revolution
• Mechanical spline function. Safety feature by
using the mechnical spline, the actuator
can only push
• Safety nut (only in push)
• Terminal cover (only LA30 L-motor versions)
• Ball screw (K) (only LA30 L-motor versions)
• Ball screw and safety nut (KAS) (only LA30 L-motor
versions)
• Ball screw, safety nut and splines (KSM) (only LA30
L-motor versions)
Usage:
• Duty cycle: Max. 10% or 6 min/hour at continuous
use
• Ambient temperature +5° to +40°C
• Storage temperature -40° to +70°C
• Compatible with control boxes CB8, CB12, CB14,
CB18
• Should LA30 be used with a non LINAK control
unit, please ask the nearest Linak representative
for further details.
all
12 mm
-motor
nsures
r. 0-1 K
tor. 10
pulses
e by
LA30 is a powerful actuator yet small enough to
fit to most applications.
The actuator can be supplied with options such
as built-in potentiometer for servo operation or
an extra powerful motor for increased speed
and strength (S-motor).
In addition to industrial and agricultural applications, the actuator is also ideal for positioning
satellite dishes.
The system actuator LA30L (option) can be combined with LINAK control boxes and it is perfet
for a variety of furniture applications.
Dimensions:
203.5
31 34
115.5
13
Ø
+0.2
10.1
0
6.1
+0.2
0
95
02 = turned 90
0
-0.2
25.9
3
75
10
64
R
40Ø
63
o
LINAK A/S
LA30002A
63Ø
30
+0.2
Ø
10.1
0
11
30Ø
30
S
S+156
01 = standard
+0.2
0
6.1
28
0
-0.2
28
25.9
21.9Ø
204.5
21.9Ø
71Ø
30
10.1Ø
11
28
+0.2
-0.2
0
21.9Ø
6.1
0
25
LINAK A/S
LA30001B
30Ø
13
30
+0.2
0
6.1
129.5
10.1Ø
0
-0.2
21.9Ø
25
Installation dimension:
LA30 L-motor + LA30 + LA30 S-motor with 3 or 6 mm pitch S + 156 mm
LA30 with spline + LA30 S-motor with 9 mm pitch S + 167 mm
LA30 with brake + LA30 S-motor with 3 or 6 mm pitch with brake S + 189 mm
LA30 with ball screw and L-motor / LA30 ball screw and safety nut S + 194 mm
LA30 L-motor with brake + LA30 S-motor 9 or 12 mm pitch with brake S + 199 mm
LA30 L-motor with ball screw, safety nut and spline S + 251 mm
63
31
38
40
46.5
35.5
LA30
Ordering example:
30
1
1
-
0
0
0
5
0
0
2
0
0
0
Cables:
Protection class:
Motor:
Stroke length:
Install. dim.:
N = No cable when IP51 (except reed)
0 = Straight with jack plug 2300 mm
1 = Straight with jack plug 1050 mm
2 = Coiled with jack plug 400 mm
3 = Coiled with jack plug 200 mm
4 = Straight without plug 500 mm (Potentiometer)
5 = Straight without plug 1200 mm (with IP66 housing)
X = Other cable/length
0 = IP51
2 = IP66 with plastic house
0 = 24 V DC
1 = 24 V S-motor
2 = 12 V S-motor
XXX = mm
0 = Standard
X =Other installation dimension
4 = 24 V L-motor for LINAK control boxes
5 = 12 V motor
Max. with 3 & 6 mm pitch 400 mm
Max. with 9 & 12 mm pitch 500 mm
Min. 50 mm
7 = 36 V motor
Option:
Colour:
Option:
Option:
Back fixture:
Spindle type:
Actuator type:
0 = None
1 = Safety nut
2 = Steel spline
3 = Steel spline with safety nut
- = Black
0 = None
0 = None
P = Potentiometer 1 Kohm
L = Potentiometer 5 Kohm
T = Potentiometer 10 Kohm
R = Reedswitch
D = Optical encoder
1 = Standard (01)
2 = Turned 90
1 = 3 mm
2 = 6 mm
3 = 9 mm
4 = 4 mm
5 = 2.5 mm
6 = 2 mm
7 = 12 mm
K = Ball spindel
LA30
4 = Brake
5 = Brake with safety nut
o
(02)
(1-tread)
(2-tread)
(3-tread)
(2-tread)
(1-tread)
(1-tread)
(4-tread)
Old type no.
LA30.1
LA30.2
LA30.3
LA30.40
LA30.25
LA30.20
LA30.4
LA30K
Loading...