Liebherr MW 1801 Specification Sheet

MW 1801
Features & Benefi ts
18” Monolith Wine – Fully Integrated, panel ready
18"
InfinitySwipe: Intuitive electronic touch-control panel features a full-color 3.5-inch touch & swipe screen that allows you to control every function.
InfinityProtection: To protect wines from high temperature fluctuations, Monolith wine columns utilize two temperature sensors in each compartment to help maintain precise temperatures.
Customized Labeling: Located on each wine shelf trim, erasable labels allow you to identify and customize your wine collection, making sure each bottle is right where you want it.
FreshAir Activated Charcoal Filter: Monolith’s FreshAir filter features independent compartment filters which helps to protect and preserve wine from contaminants and damaging odors.
Flexible Shelves on Telescopic Rails: Monolith’s flexible shelves allow for custom configurations to hold larger wine and champagne bottles.
InfinityBoard: The unique design of the Monolith wine column features a board that can be pulled out as a temporary shelf to hold bottles while organizing and adding to your wine collection.
r
Wine
Rails
Energy consumption (kWh/y) Sound rating dB(A) Total capacity cu.ft. (l)
¹
8.2 (232) Max. No. of Bordeaux bottles (0.75l) Number of shelves Shelves on telescopic rails Shelf material
aluminum/beech InfinityBoard Electronic control Temperature range °F (°C)
+41°F to +68°F (+5°C to +20°C)
InfinitySwipe
Temperature zones Temperature alarm Interior light Door alarm
visual and acoustic
InfinityLight
acoustic Safety thermostat Activated Charcoal filter Door type Door hinges²
insulated glass door
left, reversible
Product dimensions
in inch (H/W/D) in cm (H/W/D)
83 3/4" / 17 3/4" / 24 1/16"
212.6 / 45 / 61
Cut out dimensions
in inch (H/W/D) in cm (H/W/D) Net weight lbs. (kg) Voltage V/Hz
84" / 18" / 25"
213.4 / 45.7 / 63.5
295.4 (134) 115/60
This unit is also available as MW1800: with right door hinges
Available Accessories
9901 535 Stainless steel door panel wine 18" 9901 461 Monolith brushed aluminum square handle 9901 489 Monolith stainless steel round handle 9901 492 Monolith brushed aluminum soft-edge handle 9901 493 Stainless steel Toe Kick 18" 9096 342 FreshAir activated charcoal filter 9902 399 Reverse door kit
Accessories for Side-by-Side installation
9901 428 Side-by-Side kit (includes wall heater) Other stainless steel Toe Kicks for Side-by-Side installation, please visit home.liebherr.com/monolith or refer to the accessory section on the Design Guide for more information.
38
75
9 9
yes
2
yes yes
Warranty terms
Full 2-Year Warranty, full 5 -Year Warranty in the Sealed System and limited 6 -12 Year Warranty.
¹ Noise output – according to EN 60704-3. ² Please contact your Liebherr Authorized Dealer for door reversal.
Product Dimensions
(72 - 106 mm)
(2126 mm)
24"
3
17 /4"
(450 mm)
3
83 /4"
(65 mm)
9
2 /16"
(610 mm)
3 /4" (96 mm)
3
IMPORTANT! Stated minimum height dimensions include when the leveled feet are fully inserted.
Height can be increased by a maximum of
When the appliance is fitted in the recess, the appliance must be raised by turning the adjustable feet so that the appliance top has contact with the anti-tipping bracket. This results in a 4" (102 mm) Toe Kick height.
18"
3
/
17
" (450 mm)
4
.teef elba tsujda eht gninrut yb )mm 62( "1
Inset
A = 8 1/4" (210 mm) B = 1/2" (12.5 mm) C = 19 7/8" (505 mm)
Frameless
A = 8 1/2" (216 mm) B = 1/2" (12.5 mm) C = 20 3/8" (517 mm)
Dimension A = without mounted door handle
Cut out Dimensions
Continuous Toe Kick
18"
(457 mm)
D D
3"
(76 mm)
"
/16
" - 4
/16
13 3
Door
A
2
Panel Dimensions
and dimensions of free length for power
3" (76 mm)
84"
(2134 mm)
B
E
C
4" (102 mm)
W
w
A Cabinet depth frameless installation style = 25" (635 mm) Cabinet depth inset installation style = 25" (635 mm) +
Individual Toe Kick
18"
(457 mm)
panel thickness
B At this point the power cord exits from the appliance rear. 3/4" (19 mm) from the left and 5" (127 mm) from the floor. Free length of the power cord is 98" (2.5 m). We recommend power outlet to be placed outside of the appliance opening. A 15 or 20A, 110-120 VAC circuit grounded and protected by a circuit breaker or fuse is required.
C
(76 mm)
3"
D D
3" (76 mm)
(2134 mm)
84"
The appliance has a waterline laying. 1" (25 mm) in depth and 5 1/2"
B
E
C
A
(140 mm) in height over the whole width of the appliance.
D This surface is visible when the appliance door is open. Designed finish is required.
E
The anti-tipping bracket is positioned at the base of the appliance and must be secured to the wall or to the floor, please refer to the installation manual for more information.
18" recess
Inset installation style
H = 79 7/8" (2029 mm) / h = 58 7/8" (1495 mm) W = 17 3/4" (451 mm) / w = 11" (280 mm)
recess in this area for cable and
Frameless installation style
Hh
H = 80" (2032 mm) Add overlapping dimension to the panel on the top. W = 18" (457 mm) Add overlapping dimension to the panel on both sides.
8.8 ft (2400 mm)
~
* If a shaker style panel is used, which is thinner than the minum panel thickness, shorter screws than those supplied in the accessory pack must be used.
6.5 ft (2000 mm)
~
Panel thickness: Min. 5/8" (16 mm)* / Max. 1" (25.4 mm) Panel and handle weight: Max. 52 lbs. (24 kg)
home.liebherr.com/monolith
C
Specifi cations are for planning purposes only. For more detailed information refer to installation instructions or Design Guide.
Subject to modifi cation. For up-to-date information, visit home.liebherr.com/monolith.
Loading...