website : http://www.LGEservice.com
e-mail : http://LGEservice.com/techsup.html
WASHING MACHINE
SERVICE MANUAL
CAUTION
READ THIS MANUAL CAREFULLY TO DIAGNOSE TROUBLE
CORRECTLY BEFORE OFFERING SERVICE.
MODEL : WD-6550F(B) / WD-8050F(H)(B) WD-1050F(H)(B) / WD-1055F(H)(B) WD-1253F(H)(B) / WD-1255F(H)(B) WD-1054(6)F(H)B / WD-1254(6)F(H)B WD-8054F(H)B
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MAY. 2001 PRINTED IN KOREA |
|
|
|
|
P/No.:3828ER3008C |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CONTENTS |
|
1. SPECIFICATION............................................................................................................................ |
3 |
2. FEATURES & TECHNICAL EXPLANATION ................................................................................ |
4 |
3. PARTS IDENTIFICATION ............................................................................................................ |
6 |
4. INSTALLATION............................................................................................................................. |
7 |
5. OPERATION ................................................................................................................................ |
10 |
6. WIRING DIAGRAM ..................................................................................................................... |
14 |
7. PROGRAM CHART ..................................................................................................................... |
15 |
8. TROUBLESHOOTING................................................................................................................. |
16 |
8-1.BEFORE PERFORMING SERVICE .................................................................................... |
16 |
8-2.TEST MODE ........................................................................................................................ |
16 |
8-3.HOW TO KNOW THE WATER LEVEL FREQUENCY......................................................... |
17 |
8-4. ERROR DISPLAY ............................................................................................................... |
18 |
9. ERROR DIAGNOSIS AND CHECK LIST .................................................................................... |
22 |
9-1. DIAGNOSIS AND ANSWER FOR ABNORMAL OPERATION ........................................... |
22 |
9-2. FAULT DIAGNOSIS AND TROUBLESHOOTING .............................................................. |
25 |
10. DISASSEMBLY INSTRUCTIONS ............................................................................................. |
35 |
11. EXPLODED VIEW AND PART LIST .......................................................................................... |
43 |
11-1. THE EXPLODED VIEW OF CABINET ASSEMBLY.......................................................... |
43 |
11-2. THE EXPLODED VIEW OF CONTROL PANEL & DISPENSER ASSEMBLY.................. |
45 |
11-3. THE EXPLODED VIEW OF DRUM & TUB ASSEMBLY................................................... |
46 |
APPENDIX (Replacement parts list) .......................................................................................... |
48 |
2
1. SPECIFICATION
|
|
|
WD-1050F(H)B/WD-1055F(H)B |
|
|
|||
ITEM |
|
WD-1253F(H)(B)/WD-1255F(H)(B) |
WD-6550F / WD-8050F(H) |
|||||
|
WD-6550FB/WD-8050(4)F(H)B |
WD-1050F(H) / WD-1055F(H) |
||||||
|
|
|
||||||
|
|
|
WD-1054F(H)B/WD-1254(6)F(H)B |
|||||
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
POWER SUPPLY |
|
|
220V - 240V~, 50Hz |
|||||
|
|
|
|
|
|
|
|
|
PRODUCT WEIGHT |
63kg |
|
|
|
67kg |
|||
|
|
|
|
|
|
|
|
|
|
|
WASHING |
150W |
|
|
|
190W |
|
|
|
|
|
|
|
|
|
|
ELECTRICITY |
|
SPIN (800rpm) |
|
|
300W |
|||
CONSUMPTION |
|
DRAIN MOTOR |
|
|
32W |
|||
|
|
|
|
|
|
|
|
|
|
|
WASH HEATOR |
|
|
2000W |
|||
|
|
|
|
|
|
|
|
|
|
|
WASH |
|
|
45 rpm |
|||
REVOLUTION |
|
|
WD-6550F(B) |
|
|
|
400/500/650 rpm |
|
SPEED |
|
|
|
|
|
|
|
|
SPIN |
WD-8050F(H)(B)/WD-8054F(H)B |
|
400/600/800 rpm |
|||||
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
WD-1050(5)F(H)(B)/1054(6)F(H)B |
|
400/600/800/1000 rpm |
|||
|
|
|
|
|
|
|
|
|
|
|
|
WD-1253(5)F(H)(B)/1254(6)F(H)B |
|
400/600/800/1000/1200 rpm |
|||
|
|
|
|
|
|
|
|
|
OPERATION WATER PRESSURE |
|
0.3-10kgf/cm2 (30-1000kPa) |
||||||
|
|
|
|
|
|
|
|
|
CONTROL TYPE |
|
|
Electronic |
|||||
|
|
|
|
|
|
|
|
|
WASH CAPACITY |
|
|
7.0kg |
|||||
|
|
|
Synthetic (4.0), Delicate (3.0kg), Wool (2.0kg) |
|||||
|
|
|
|
|
|
|
||
DIMENSION |
600mm (W) x 600mm (D) x 850mm (H) |
|||||||
|
|
|
|
|
|
|
|
|
WASH PROGRAM |
Normal |
|
Coloreds, Whites, Synthetic, Delicate, Wool |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
for Australia |
|
Coloreds, Favourite, Heating, Synthetic, Wool |
|||
|
|
|
|
|
|
|
|
|
RINSE |
|
|
Super, Normal, Hold |
|||||
|
|
|
|
|
|
|
|
|
DOOR SWITCH TYPE |
|
|
Bi-Metal type |
|||||
|
|
|
|
|
|
|
|
|
WATER LEVEL |
|
|
9 steps (by sensor) |
|||||
|
|
|
|
|
|
|
|
|
RESERVATION |
|
|
From 3 hours to 19 hours |
|||||
|
|
|
|
|
|
|
|
|
SENSING OF THE LAUNDRY AMOUNT |
|
|
Adapted |
|||||
|
|
|
|
|
|
|
||
FUZY LOGIC |
|
|
Adapted |
|||||
|
|
|
|
|
|
|
||
DISPLAY OF THE REMAINING TIME |
|
|
Adapted |
|||||
|
|
|
|
|
|
|
||
ERROR DIAGNOSIS |
10 item |
|
|
|
7 item |
|||
|
|
|
|
|
|
|
||
POWER AUTO OFF |
|
|
Adapted |
|||||
|
|
|
|
|
|
|
||
CHILD LOCK |
|
|
Adapted |
|||||
|
|
|
|
|
|
|
||
AUTO RESTART |
|
|
Adapted |
|||||
|
|
|
|
|
|
|
|
|
ECO |
|
|
|
Adapted |
||||
|
|
|
|
|
|
|
||
RAPID |
|
|
Adapted |
|||||
|
|
|
|
|
|
|
|
|
3
2. FEATURES & TECHNICAL EXPLANATION
2-1.FEATURES
40%
Jumbo drum
Jumbo drum can wash about 40% more per load than conventional washing machine. A bigger drum improves the wash performance.
More economical by Fuzzy Logic System
FUZZY Logic System detects the amount of load and water temperature, and then determines the optimum water level and washing time to minimize energy and water consumption.
Child-Lock
The Child-Lock system has been developed to prevent children from pressing any button to change the programme during operation.
Low noise speed control system
By sensing the amount of load and balance, automatical distributes load evenly to minimize the spinning noise level.
Auto Restart
Although the washing machine is turned off by a power failure, it restarts automatically where it stopped when power is supplied again. It will be the same when the machine is unplugged and is plugged in again.
4
2-2.DETERMINE WASHING TIME BY FUZZY LOGIC
To get the best washing performance optimal time is determined by sensing of water temperature, selected washing temperature and laundry amount.
water |
|
|
|
|
temperature |
|
|
|
|
|
|
|
washing time |
|
selected |
|
FUZZY |
|
the best |
|
|
washing |
||
washing |
|
rinse time |
||
|
LOGIC |
|||
temperature |
|
|
performance |
|
|
|
|
|
|
laundry |
|
|
spin rhythm, time |
|
|
|
|
|
|
amount |
|
|
|
|
SENSING |
PROCESSING |
|
DETERMINATION |
EFFECT |
2-3.WATER LEVEL CONTROL
This model adopts a pressure sensor which can sense the water level in the tub.
When the water level reaches to the preset level the water supply is stopped, then the washing program proceeds. Spinning does not proceed until the water in the tub reduces a certain level.
2-4.THE DOOR CAN NOT BE OPENED
While program is operating.
While Door Lock light turns on.
5
3. PARTS IDENTIFICATION
Drawer
(For detergent and fabric softener)
Drain hose
Drum
Drain pump filter
Drain plug
ACCESSORIES
* Option : Cold - 1EA
Cold/Hot - 2EA
Inlet hose
Power plug
• If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or a similarly qualified person in order to avoid a hazard.
Control panel |
Door
Lower cover Adjustable feet
Lower cover cap
Wrench (1EA)
6
4. INSTALLATION
Before servicing ask the customer what the trouble is.
Check the adjustment (power supply is 220-240V, remove the transit bolts....) Check the troubles referring to the troubleshooting.
Decide service steps referring to disassembly instructions. Then, service and repair.
After servicing, operate the appliance to see whether it works O Kor NOT.
STANDARD INSTALLATION
The appliance should be installed as follows.
REMOVE |
INSTALL THE APPLIANCE ON |
ADJUST THE |
THE TRANSIT BOLTS |
FLAT AND FIRM SURFACE |
HORIZONTAL |
Remove the transit bolts |
|
Turn the adjustable feet to |
(4EA: ) with supplied wrench. |
|
set the appliance horizontally. |
Keep the transit bolts and |
|
|
wrench for future use. |
|
|
|
|
Low |
|
|
High |
|
|
The appliance goes up by |
|
|
rotating the feet clockwise. |
1 |
|
The appliance comes down by |
|
|
rotating the feet counter - |
|
|
clockwise. |
7
HOW TO CONNECT INLET HOSE
Check that the rubber washer is inside of the valve connector.
Connect the inlet hose firmly to prevent leak.
CONNECT DRAIN HOSE
Make sure that the hose is not twisted.
Avoid submerging the end of the hose.
The drain hose should be placed under 100cm from the floor. CONNECT POWER PLUG
Connect the power plug to the wall outlet.
Avoid connecting several electric devices, It may be the cause of a fire.
8
TEST OPERATION
Preparation for |
Press the power button. |
Press the START/PAUSE |
washing. |
|
button. |
Connect the power plug to |
In case of Coloreds program. |
the outlet. |
|
Connect the inlet hose. |
|
Check the water heating. |
Check automatic reverse |
Check the water supply. |
|
turn. |
|
Press the button TEMP |
Check if the drum rotates |
and the present temperature |
clockwise and counter- |
will be displayed. |
clockwise. |
Check if water is supplied through the detergent dispenser.
Check drain and spin
Turn off Wash and Rinse after pressing the Start/Pause button and start the machine again. Check drain and Spin.
Power off and open the |
Water removal |
door |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Power off and then power on. |
If SVC is needed during check, |
||||
Check if the door can be |
remove the remaining water by |
||||
opened after door lock lamp |
pulling out the hose cap. |
||||
turns off. |
|
9
5. OPERATION
■WD-1050(5)F(H)(B) / WD-1253(5)F(H)(B) / WD-1054(6)F(H)B / WD-1254(6)F(H)B
LED display |
Water temperature selector |
Display the remaining time (Hour : Minute ) to finish.
In case of abnormal operation, error indications are displayed. (,, ,,,,) See troubleshooting guide.
Error display.
Press the button to select water temperature.
The water temperature |
|
[40 C |
60 C cold (30 C)] can be selected in |
Coloreds, or Synthetic. |
|
95 C |
is selected for Whites Heating only. |
By pressing the button while operating the washer, the present temperature is displayed.
The display blinks if there is |
|
|
an error. |
14 Refer |
|
no inlet |
: Trouble with |
|
|
water supply. |
|
imbalance : The laundry is |
|
|
|
tilted to one |
60 |
|
side. |
|
no drain |
: If the drain pump |
|
|
filter is clogged. |
|
Door lock lamp |
|
|
It shows whether the |
. |
|
door can be opened or |
|
|
not. |
|
|
when the lamp is on, |
|
|
the door can’t be |
|
|
opened. |
|
|
For manual wash, rinse, and spin speed
Use these buttons to change wash/ rinse/spin. When lamp is off, no selection has been made. Prewash is available for Coloreds, Whites, and Synthetic.
Coloreds, Heating, and Synthetic
Rinse hold
If you desire to leave fabrics in the machine without spinning after rinse to prevent wrinkling, you may select rinse Hold by pressing the Rinse button.
To drain and spin, press the Rinse button to turn off the rinse hold lamp.
10
Wash program selector
5 programs can be set depending on the type of the laundry.
If the power button is pressed. |
|
||
Coloreds program is |
automatically set. |
||
By pressing the button, [ Coloreds |
Whites |
||
Synthetic |
Delicate |
Wool ] can be selected. |
|
Coloreds |
Favourite |
Heating Synthetic |
Start/Pause button |
Power button |
Use the button to start or |
Press the button to |
pause wash cycle. |
turn power on and |
The power turns off |
off. |
automatically 4 minutes |
|
after the pause button is |
|
pressed. |
|
|
|
|
|
|
|
|
|
|
Child - lock |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Child Lock system can be |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
set and canceled by pressing |
|
|
|
|
|
|
|
|
|
both [Temp] and [Eco/Rapid ] |
|
|
|
|
|
|
|
|
|
button simultaneously. |
|
|
|
|
|
|
|
|
|
Once Child Lock is set, |
|
|
|
|
|
|
|
|
|
all button are inoperable. |
|
|
|
|
|
|
|
|
|
Child Lock system can be |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
set anytime even during |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Power-off, on pause and |
|
|
|
|
|
|
|
|
|
operation. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
It is automatically cancelled |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
when an operational error |
|
|
|
|
|
|
|
|
|
occur, and when the cycles |
|
|
|
|
|
: for Australia |
ends. |
|||
|
|
|
|
|
|
|
|
|
|
Time Delay
Press the button when delayed washing is needed.
When the button is pressed, [3:00] is displayed,
A maximum delay of [19:00] hours can be set.
Each press advances time delay by the hour. Use [Power] button to cancel [Time Delay].
Eco/Rapid
If you press the Eco/Rapid button in White Heating program, Eco function is selected. Eco function gives you almost the same washing effect as that in 95 C with less energy consumption.
If you press the Eco/Rapid button in Coloreds or Synthetic program, Rapid function is selected. Rapid function reduces the whole time including the washing and rinsing time about by half an hour.
11
■ WD-6550F(B)/WD-8050(4)F(H)(B)
Error display.
The display blinks if there is an error. 14 Refer no inlet : Trouble with water supply.
imbalance : The laundry is tilted to one side. no drain : If the drain pump filter is clogged.
Rinse hold
If you desire to leave fabrics in the machine without spinning after rinse to prevent them getting wrinkled, you may select rinse Hold by pressing the Rinse button.
To drain and spin, press the Rinse button to turn off the rinse Hold lamp.
Door lock lamp |
|
|
It shows whether the |
|
|
door can be opened or |
|
|
not. |
Fuzzy Logic & Quiet |
|
when the lamp is on, |
||
|
||
the door can’t be |
Cold |
|
opened. |
|
|
|
. |
For manual wash, rinse, and spin speed
Use these buttons to change wash, rinse, spin. When lamp is off, no selection has been made. Prewash is available for Coloreds, Whites, and Synthetic.
Water temperature selector
• Press the button to select water temperature.
• The water temperature [40˚C 60˚C Cold] can be selected in Coloreds, or Synthetic program.
• 95˚C is selected for Whites only.
12
Wash program selector |
Start/Pause button Power button |
5 programs can be set depending on the type of the laundry.
If the power button is pressed. Coloreds program is automatically set.
By pressing the button, [ Coloreds Whites Synthetic Delicate Wool ] can be selected.
Use the button to start or pause wash cycle.
The power turns off automatically 4 minutes after the pause button is pressed.
Press the button to turn power on and off.
Child - lock
Child Lock system can be set and canceled by pressing both [Eco] and [Rapid] button simultaneously.
Once Child Lock is set, all button are inoperable. Child Lock system can be set anytime even during Power-off, on pause and operation.
It is automatically cancelled when an operational error occur, and when the cycles ends.
Eco
If you press the Eco/Rapid button in White <Heating> program, Eco function is selected. Eco function gives you almost the same washing effect as that in 95 C with less energy consumption.
Rapid
If you press the Eco/Rapid button in Coloreds or Synthetic program, Rapid function is selected. Rapid function reduces the whole time including the washing and rinsing time about by half an hour.
13
6.WIRING DIAGRAM
■WD-6550FB / 8050(4)F(H)B / 1050(5)F(H)B / 1253(5)F(H)(B) / 1054(6)F(H)B / 1254(6)F(H)B
GN/YL(GN)
GN/YL(GN)
■WD-6550F / WD-8050F(H) / WD-1050(5)F(H)
(option)
14