LG L1942PP-BF, L1742PP-BF Owner's Manual

0 (0)

Make sure to read the Important Precautions before using the product.

Keep the User's Guide(CD) in an accessible place for future reference.

See the label attached on the product and give the information to your

dealer when you ask for service.

L1742P

L1942P

L1742PP

L1942PP

L1742PQ

L1942PQ

User’s Guide

This unit has been engineered and manufactured to ensure your personal

safety, however improper use may result in potential electrical shock or fire

hazards. In order to allow the proper operation of all safeguards

incorporated in this display, observe the following basic rules for its

installation, use, and servicing.

On Safety

Use only the power cord supplied with the unit. In case you use another power

cord, make sure that it is certified by the applicable national standards if not being

provided by the supplier. If the power cable is faulty in any way, please contact the

manufacturer or the nearest authorized repair service provider for a replacement.

The power supply cord is used as the main disconnection device. Ensure that the

socket-outlet is easily accessible after installation.

Operate the display only from a power source indicated in the specifications of

this manual or listed on the display. If you are not sure what type of power supply

you have in your home, consult with your dealer.

Overloaded AC outlets and extension cords are dangerous. So are frayed power

cords and broken plugs. They may result in a shock or fire hazard. Call your service

technician for replacement.

Do not Open the Display.

There are no user serviceable components inside.

There are Dangerous High Voltages inside, even when the power is OFF.

Contact your dealer if the display is not operating properly.

To Avoid Personal Injury :

Do not place the display on a sloping shelf unless properly secured.

Use only a stand recommended by the manufacturer.

Do not drop an object on or apply impact to the product. Do not throw any toys

or objects on the product screen.

It can cause injury to human, problem to product and damage the display.

To Prevent Fire or Hazards:

Always turn the display OFF if you leave the room for more than a short period

of time. Never leave the display ON when leaving the house.

Keep children from dropping or pushing objects into the display's cabinet

openings. Some internal parts carry hazardous voltages.

Do not add accessories that have not been designed for this display.

When the display is to be left unattended for an extended period of time, unplug

it from the wall outlet.

In the presence of thunder and lightning, never touch the power cord and signal

cable because it can be very dangerous. It can cause electric shock.

Important Precautions

On Installation

Do not allow anything to rest upon or roll over the power cord, and do not place the

display where the power cord is subject to damage.

Do not use this display near water such as near a bathtub, washbowl, kitchen sink,

laundry tub, in a wet basement, or near a swimming pool.

Displays are provided with ventilation openings in the cabinet to allow the release of

heat generated during operation. If these openings are blocked, built-up heat can

cause failures which may result in a fire hazard. Therefore, NEVER:

Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.

Place the display in a built-in enclosure unless proper ventilation is provided.

Cover the openings with cloth or other material.

Place the display near or over a radiator or heat source.

Main power breaker is the power cord and this breaking device must be located at

a location where it is easy to operate.

Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,

mar, or damage the Active Matrix LCD permanently.

Do not press the LCD screen with your finger for a long time as this may cause

some afterimages.

Some dot defects may appear as Red, Green or Blue spots on the screen.

However, this will have no impact or effect on the display performance.

If possible, use the recommended resolution to obtain the best image quality for

your LCD display. If used under any mode except the recommended resolution,

some scaled or processed images may appear on the screen. However, this is

characteristic of the fixed-resolution LCD panel.

Leaving a fixed image on the screen for a long time may cause damage to the

screen and cause image burn-in. Make sure to use a screen saver on the monitor.

This phenomenon occurs to products by other manufacturers as well, and this

occurrence is not subject to warranty.

On Cleaning

Unplug the display before cleaning the face of the display screen.

Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display

screen because over-spraying may cause electrical shock.

On Repacking

Do not throw away the carton and packing materials. They make an ideal

container in which to transport the unit. When shipping the unit to another

location, repack it in its original material.

On Disposal

The fluorescent lamp used in this product contains a small amount of mercury.

Do not dispose of this product with general household waste.

Disposal of this product must be carried out in accordance to the regulations of

your local authority.

Connecting the Display

Important

This illustration depicts the general model of connection. Your monitor may differ from

the items shown in the picture.

Do not carry the product upside down holding only the stand base. The product may

fall and get damaged or injure your foot.

Before setting up the monitor, ensure that the power to the monitor, the computer

system, and other attached devices is turned off.

Connecting the stand

1. Place the monitor with its front facing downward on a cushion or soft cloth.

2. Assemble the Stand Base into the Stand Body.

Be sure don't pull out the Stop Pin and make the Stand Base direction as shown.

3. Make the monitor stand , then pull out the Stop Pin.

Stand Base

FRONT

Stand Body

Stop PinSide

Stop Pin

pull out the stop pin

The tape and locking pin may only be removed from those monitors

equipped with a standing base when the base is pulled up. Otherwise,

you may be injured by the protruding sections of the stand.

Warning:

Connecting the Display

-6 17

Before setting up the monitor, ensure that the power to the monitor, the computer

system, and other attached devices is turned off.

Positioning your display

1. Adjust the position of the panel in various ways for maximum comfort.

Tilt Range: -6˚~17˚

Ergonomic

It is recommended that in order to maintain an ergonomic and comfortable viewing

position, the forward tilt angle of the monitor should not exceed 5 degrees.

Height Range: maximum 4.33 inch (110.0 mm)

110.0 mm

Landscape & Portrait: You can rotate the panel 90˚ clockwise.

( For detailed information, please refer to the Pivot Software CD provided.)

First, remove

the locking pin.

Connecting the Display

Before setting up the monitor, ensure that the power to the monitor, the computer

system, and other attached devices is turned off.

Positioning your display

Using the cable holder

If you want to use the cable holder to let your cables together, please put them through

right as shown. For if you don't do like that, you cannot use Pivot function smoothly.

Connecting the Display

Wall-outlet type

Power Cord

Analog signal

D-sub

Digital signal

DVI

PC-outlet type

DVI-D (This feature is not available in all countries.)

Mac adapter

For Apple Macintosh use, a separate plug

adapter is needed to change the 15 pin high

density (3 row) D-sub VGA connector on the

supplied cable to a 15 pin 2 row connector.

NOTE

This is a simplified representation of the rear view.

This rear view represents a general model; your display may differ from the view as shown.

User must use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with ferrite cores to maintain standard

compliance for the product.

Using the Computer

1. Make sure to turn off the computer and product. Connect the cable as below sketch map

form to .

Connect DVI Cable

Connect Dsub Cable (PC)

Connect Dsub Cable (Mac)

2. Press button on the front switch panel to turn the

power on. When monitor power is turned on, the

'Self Image Setting Function' is executed automatically.

(Only Analog Mode)

NOTE

‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the user

connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual

input signals.

‘AUTO/SET’ Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted

screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve

resolution.

Control Function

Control Panel Functions

MENU Button

Use this button to enter or exit from the On Screen Display.

OSD LOCKED/UNLOCKED

This function allows you to lock the current control settings, so

that these settings are not inadvertently changed. To lock the

OSD settings, press and hold the MENU button for several

seconds. The message "OSD LOCKED" appears.

You can unlock the OSD settings at any time by

pushing the MENU button for several seconds. The

message "OSD UNLOCKED" appears.

Front Panel Controls

MENU AUTO/SET

ENGINE SOURCE

+ 18 hidden pages