82-G1877-1EN.book Page i Thursday, August 23, 2007 10:53 AM
82-G1877-1EN.book Page ii Thursday, August 23, 2007 10:53 AM
Deco / E1000 Generic User Guide
This manual is based on the production version of
the Kyocera Deco / E1000 phone. Software
changes may have occurred after this printing.
Kyocera reserves the right to make changes in
technical and product specifications without prior
notice. The products and equipment described in
this documentation are manufactured under license
from QUALCOMM Incorporated under one or more
of the following U.S. patents:
The Kyocera Wireless Corp. (“KWC”) products
described in this manual may include copyrighted
KWC and third party software stored in
semiconductor memories or other media. Laws in
the United States and other countries preserve for
KWC and third party software providers certain
exclusive rights for copyrighted software, such as
the exclusive rights to distribute or reproduce the
copyrighted software. Accordingly, any copyrighted
software contained in the KWC products may not
be modified, reverse engineered, distributed or
reproduced in any manner not permitted by law.
Furthermore, the purchase of the KWC products
shall not be deemed to grant either directly or by
implication, estoppel, or otherwise, any license
under the copyrights, patents or patent applications
of KWC or any third party software provider, except
for the normal, non-exclusive royalty-free license to
use that arises by operation of law in the sale of
a product.
Kyocera is a registered trademark of Kyocera
Corporation. Brick Attack and Race 21 are
trademarks of Kyocera Wireless Corp.
QUALCOMM is a registered trademark of
QUALCOMM Incorporated.
Openwave is a trademark of Openwave Systems
Incorporated. eZiText is a registered trademark of
Zi Corporation. TransFlash is a trademark of
SanDisk Corporation. Bluetooth trademarks are
owned by Bluetooth SIG, Inc. and used by Kyocera
Wireless Corp. under license.
All other trademarks are the property of their
respective owners.
For information about Deco / E1000Bluetooth
Certification visit the Bluetooth Qualification
Program Web site at
qualweb.bluetooth.org.
82-G1877-1EN, Rev. 001
FCC/IC Notice
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation. To maintain compliance with
FCC RF exposure guidelines, if you wear a handset
on your body, use the Kyocera Wireless Corp.
(KWC) supplied and approved case
CV90-L8060-01, CV90-L8061-01, holster
CV90-R2090-01, and universal pouch
CV90-61344-03.
Other accessories used with this device for
body-worn operations must not contain any metallic
components and must provide at least 15 mm
separation distance including the antenna and
the user’s body.
THIS MODEL PHONE MEETS THE
GOVERNMENT’S REQUIREMENTS FOR
EXPOSURE TO RADIO WA VES
.
ii
82-G1877-1EN.book Page iii Thursday, August 23, 2007 10:53 AM
Your wireless phone is a radio transmitter and
receiver. It is designed and manufactured not to
exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal
Communications Commission of the U.S.
Government. These limits are part of
comprehensive guidelines and establish permitted
levels of RF energy for the general population. The
guidelines are based on standards that were
developed by independent scientific organizations
through periodic and thorough evaluation of
scientific studies. The standards include a
substantial safety margin designed to assure the
safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phones
employs a unit of measurement known as the
Specific Absorption Rate, or SAR. The SAR limit set
by the FCC is 1.6 W/kg.*
Tests for SAR are conducted using standard
operating positions specified by the FCC with the
phone transmitting at its highest certified power
level in all tested frequency bands.
Although the SAR is determined at the highest
certified power level, the actual SAR level of the
phone while operating can be well below the
maximum value.
This is because the phone is designed to operate at
multiple power levels so as to use only the power
required to reach the network. In general, the closer
you are to a wireless base station antenna, the
lower the power output.
Before a phone model is available for sale to the
public, it must be tested and certified to the FCC
that it does not exceed the limit established by the
government-adopted requirement for safe
exposure. The tests are performed in positions and
locations (e.g., at the ear and worn on the body) as
required by the FCC for each model.
Body-worn measurements differ among phone
models, depending upon availability of accessories
and FCC requirements. While there may be
differences between the SAR levels of various
phones and at various positions, they all meet the
government requirement for safe exposure.
The FCC has granted an Equipment Authorization
for this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF
emission guidelines. SAR information on this model
phone is on file with the FCC and can be found
under the Display Grant section
www.fcc.gov/oet/fccid after searching on the
FCC ID: OVFE1000-255.
Additional information on SAR can be found on the
Cellular Telecommunications and Internet
Association (CTIA) web-site at
www.wow-com.com.
* In the United States and Canada, the SAR limit for
mobile phones used by the public is 1.6 watts/kg
(W/kg) averaged over one gram of tissue. The
standard incorporates a substantial margin of
safety to give additional protection for the public
and to account for any variations in measurements.
Caution
The user is cautioned that changes or modifications
not expressly approved by the party responsible for
compliance could void the warranty and user’s
authority to operate the equipment.
Optimize your phone’s performance
Use the guidelines in this user guide to learn how to
optimize the performance and life of your phone
and battery.
Air Bags
If you have an air bag, DO NOT place installed or
portable phone equipment or other objects over the
air bag or in the air bag deployment area. If
equipment is not properly installed, you and your
passengers risk serious injury.
User Guideiii
82-G1877-1EN.book Page iv Thursday, August 23, 2007 10:53 AM
Medical devices
Pacemakers—Warning to pacemaker wearers:
Wireless phones, when in the ‘on’ position, have
been shown to interfere with pacemakers. The
phone should be kept at least six (6) inches away
from the pacemaker to reduce risk.
The Health Industry Manufacturers Association and
the wireless technology research community
recommend that you follow these guidelines to
minimize the potential for interference.
•Always keep the phone at least six inches (15
centimeters) away from your pacemaker when
the phone is turned on.
•Do not carry your phone near your heart.
•Use the ear opposite the pacemaker.
•If you have any reason to suspect that
interference is taking place, turn off your
phone immediately.
Hearing aids—Some digital wireless phones may
interfere with hearing aids. In the event of such
interference, you may want to consult your service
provider or call the customer service line to
discuss alternatives.
Other medical devices—If you use any other
personal medical device, consult the manufacturer
of the device to determine if it is adequately
shielded from external RF energy. Your physician
may be able to help you obtain this information.
In health care facilities—Turn your phone off in
health care facilities when instructed. Hospitals and
health care facilities may be using equipment that is
sensitive to external RF energy.
Potentially unsafe areas
Posted facilities—Turn your phone off in any
facility when posted notices require you to do so.
Vehicles—RF signals may affect improperly
installed or inadequately shielded electronic
systems in motor vehicles. Check with the
manufacturer of the device to determine if it is
adequately shielded from external RF energy.
Blasting areas—Turn off your phone where
blasting is in progress. Observe restrictions, and
follow any regulations or rules.
Potentially explosive atmospheres—Turn off your
phone when you are in any area with a potentially
explosive atmosphere. Obey all signs and
instructions. Sparks in such areas could cause an
explosion or fire, resulting in bodily injury or
death.Areas with a potentially explosive atmosphere
are often, but not always, clearly marked.
They include:
•fueling areas such as gas stations
•below deck on boats
•transfer or storage facilities for fuel
or chemicals
•vehicles using liquefied petroleum gas, such as
propane or butane
•any other area where you would normally be
advised to turn off your vehicle engine
Use with care
Use only in normal position (to ear). Avoid dropping,
hitting, bending, or sitting on the phone.
Keep phone dry
If the phone gets wet, turn the power off
immediately and contact your dealer. Water
damage may not be covered under warranty.
Resetting the phone
If the screen seems frozen and the keypad does not
respond to keypresses, reset the phone by
completing the following steps:
1.Remove the battery door.
2.Remove and replace the battery.
If the problem persists, return the phone to the
dealer for service.
iv
82-G1877-1EN.book Page v Thursday, August 23, 2007 10:53 AM
Accessories
Use only Kyocera-approved accessories with
Kyocera phones. Use of any unauthorized
accessories may be dangerous and will invalidate
the phone warranty if said accessories cause
damage or a defect to the phone.
Radio Frequency (RF) energy
Your telephone is a radio transmitter and receiver.
When it is on, it receives and sends out RF energy.
Your service provider’s network controls the power
of the RF signal. This power level can range from
0.006 to 0.6 watts.
In August 1996, the U.S. Federal Communications
Commission (FCC) adopted RF exposure
guidelines with safety levels for hand-held wireless
phones. These guidelines are consistent with the
safety standards previously set by both U.S. and
international standards bodies in the
following reports:
•ANSI C95.1 (American National Standards
Institute, 1992)
•NCRP Report 86 (National Council on
Radiation Protection and
Measurements, 1986)
•ICNIRP (International Commission on
Non-Ionizing Radiation Protection, 1996)
Your phone complies with the standards set by
these reports and the FCC guidelines.
E911 mandates
Where service is available, this handset complies
with the Phase I and Phase II E911 Mandates
issued by the FCC.
Hearing Aid Compatibility (HAC)
Some mobile phones and hearing devices (hearing
aids and cochlear implants), when used together,
result in buzzing, humming, or whining noises
detected by the user. Some hearing devices are
more immune than others to this interference noise,
and phones also vary in the amount of interference
they generate.
The wireless telephone industry has developed
ratings for some of their mobile phones, to assist
hearing device users in finding phones that may be
compatible with their hearing devices. Not all
phones have been rated. Phones that are rated
have the rating on their box or a label on the box.
The ratings are not guarantees and results will vary
depending on the user’s hearing device and
hearing loss. If your hearing device happens to be
vulnerable to interference, you may not be able to
use a rated phone successfully. Trying out the
phone with your hearing device is the best way to
evaluate it for your personal needs.
M-Ratings—Phones rated M3 or M4 meet FCC
requirements and are likely to generate less
interference to hearing devices than phones that
are not labeled. M4 is the better/higher of the
two ratings.
Hearing devices may also be measured for
immunity to this type of interference. Your hearing
device manufacturer or hearing health professional
may help you choose the proper rating for your
mobile phone. The more immune your hearing aid
is, the less likely you are to experience interference
noise from mobile phones.
For more information about hearing aid
compatibility, visit the FCC's Consumer &
Governmental Affairs Bureau Web site at
www.fcc.gov/cgb/dro.
User Guidev
82-G1877-1EN.book Page vi Thursday, August 23, 2007 10:53 AM
Battery and charger specifications
ChargerInputOutput
CV90-G2588100-240 VAC / 50/60 Hz5V 350mA
CV90-G2529100-240 VAC / 50/60 Hz4.5V 1.2A
CE90-R2231 100-240 VAC / 50/60 Hz4.5V 600mA
Standard Battery (5 mm) CV90-N3344, 3.7 V / 900 mAh
Kyocera Wireless Corp.
10300 Campus Point Drive
San Diego, CA 92121 USA
www.kyocera-wireless.com
To purchase accessories, visit
www.kyocera-wireless.com/store
vi
82-G1877-1EN.book Page vii Thursday, August 23, 2007 10:53 AM
82-G1877-1EN.book Page 1 Thursday, August 23, 2007 10:53 AM
1GETTING STARTE D
Phone battery
Install the battery
To install the battery:
1.Hold the phone
face down.
2.Unsnap the battery
door by sliding your
fingernail into the
recess located at the
bottom of the
battery door.
3.Place the battery in
the phone casing with
the metal contacts
toward the bottom of
the phone.
4.Place the tabs at the
top of the battery door
in the openings at the
To charge the battery:
1.Connect the AC adapter
to the jack on the
bottom of the phone.
2.Plug the adapter into a
wall outlet.
The battery icon in the upper-right corner of the
screen tells you whether the phone is:
•Charging (the icon is animated)
•Partially charged
•Fully charged
Warning: The battery will not charge if you use
the phone while it is connected to an AC adapter.
Warning: If you are using a 400 mA charger with
any of the following part numbers:
CV90-G2968-01; CV90-G2610-02; or
CV90-60859-1, please be aware that this power
unit is intended to be correctly oriented in a
vertical or floor mount position.
top of the battery well.
5.Press the battery door
until it snaps into place.
Charge the battery
You must have at least a partial charge in the
battery to make or receive calls.
User Guide1
Recharge the battery
You can safely recharge the battery at any time,
even if it has a partial charge.
Note: Before removing the battery, make sure the
phone is powered off.
82-G1877-1EN.fm Page 2 Thursday, August 30, 2007 11:24 AM
Battery care
General safety guidelines
√Do not disassemble or open the battery.
√Do not crush, bend, deform, puncture, or
shred the battery.
√Do not attempt to insert foreign objects into
the battery.
√Do not immerse the battery or expose it to
water or other liquids. Even if a battery
appears to dry out and operate normally,
internal parts can slowly corrode and pose a
safety hazard.
√Always keep the battery between 15°C and
25°C (59°F and 77°F). Do not expose the
battery to extremes of temperature (heat or
cold), fire, or other hazards such as a cooking
surface, iron, or radiator.
√Never use any damaged battery.
√Only use the battery for its intended phone.
√Only use the battery with a qualified charger.
Use of an unqualified battery charger may
present a risk of fire, explosion, leakage, or
other hazard. If you are unsure about
whether a charger is qualified, contact
customer support.
√Do not short-circuit the battery or allow
metallic conductive objects—such as
keys, coins, or jewelry—to contact the
√Replace the battery only with another qualified
battery. Use of an unqualified battery may
present a risk of fire, explosion, leakage, or
other hazard. If you are unsure about whether
a replacement battery is compatible, contact
customer support.
√Promptly dispose of used batteries in
accordance with local regulations and
recycle if possible. Do not dispose as
household waste.
√Supervise all battery usage by children.
√Avoid dropping the phone or battery. If the
phone or battery is dropped, especially on a
hard surface, an internal short-circuit can
occur and pose a safety hazard. If you
suspect battery damage, take it to a service
center for inspection.
√Improper battery use may result in a fire,
explosion, or other hazard.
Common causes of battery drain
√Playing games or using the Web.
√Taking pictures with the flash on.
√Keeping backlighting on.
√Operating in digital mode when far away from
a base station or cell site.
√Using data cables or accessories.
√Operating when no service is available, or
service is available intermittently.
battery’s terminals.
√High earpiece and ringer volume settings.
√Repeating sound, vibration, or lighted alerts.
2Phone battery
82-G1877-1EN.book Page 3 Thursday, August 23, 2007 10:53 AM
Phone overview
Get to know your phone
The phone is shown here in open position.
1.Earpiece speaker.
2.Home screen.
3.OK key selects a menu item or option.
4.Left softkey accesses menus and functions.
5.Send key starts or answers a call. Press once to activate
voice command, twice to display the All Calls list, and three
times to redial the last number dialed. Press and hold to
access voice shortcuts.
6.
Back key erases characters in text entry and returns you to the
previous screen.
7.Keypad for entering numbers, letters, or symbols.
8.
Shift * key changes the text mode in text entry.
9.Microphone.
10. Jack for AC adapter (included) and data cable (sold separately).
11.
Navigation key scrolls through lists and text entry fields and
accesses shortcuts from the home screen.
12. Right softkey accesses the Contacts directory and other
menu options.
13.
End key turns the phone on and off, ends a call or browser
session, and returns you to the home screen.
14.
Speakerphone key activates the speakerphone and answers
incoming calls.
15.
Space # key enters a space during text entry. Press and hold to activate or deactivate Silent mode.
16. 0 Next key cycles through word choices during text entry.
User Guide3
82-G1877-1EN.book Page 4 Thursday, August 23, 2007 10:53 AM
The phone is shown here in closed position. When the phone is closed, the keys are locked to prevent
accidental key presses.
1.Jack for Hands-free Headset only (sold separately).
2.Camera lens.
3.
Volume key raises or lowers ringer volume.
4.Camera key activates Camera mode. To activate Camera
mode, press and hold the
Camera key.
5.External screen displays time, caller ID, signal, and
battery strength.
6.External speaker.
7.Camera Flash/Message Indicator light flashes when taking a
picture or lights when you have a message or missed call.
Warning: Inserting an accessory into the incorrect jack will
damage the phone.
Common keys
The following keys are pressed frequently when you use your phone. Throughout this user guide, these
keys will be referred as follows:
Navigation keyEnd key
(also referred to as the Power key)
OK keyBack key
Left softkeySpeakerphone key
Right softkeyCamera key
Send key
(also referred to as the Talk key)
4Phone overview
82-G1877-1EN.book Page 5 Thursday, August 23, 2007 10:53 AM
Screen icons
These icons may appear on your phone’s screen:
The phone is operating in IS95 digital mode.
The phone is operating in Analog (FM) mode.
The phone is operating in IS2000 (1X) digital
mode.
The phone is receiving a signal. You can make and
receive calls. Fewer bars indicate a weaker signal.
A call is in progress.
The phone is not receiving a signal. You cannot
make or receive calls.
The phone is roaming outside of its home
service area.
Data service is available and active on your phone.
Check with your service provider for availability.
(blinking) The phone is sending high-speed data.
(blinking) The phone is receiving high-speed data.
New voice and text message.
New photo message.
New photo and voice message.
New photo and text message.
New photo, voice and text message.
The phone is set to light up instead of ring.
The phone is set to vibrate or to vibrate and then
ring.
Position location is set to your service provider and
to emergency services.
Position location is set to emergency services only.
The speaker phone is turned on.
Data service is available, but the phone is dormant.
The battery is fully charged. The more black bars,
the greater the charge.
The alarm clock is set.
The phone is in privacy mode or is accessing a
secure Web site.
New text message.
New voice message.
User Guide5
The phone is in camera mode.
Camera flash mode is ready.
Camera zoom mode is ready.
The phone is in video mode.
Bluetooth wireless technology is enabled (On).
Bluetooth wireless technology is disabled (Off).
82-G1877-1EN.book Page 6 Thursday, August 23, 2007 10:53 AM
Main menu
The contents of the main menu are as follows:
Recent Calls
All Calls
Incoming
Outgoing
Missed
Erase Call List
Call Timer
Contacts
View All
Add New
Groups
Speed Dial List
Voice Dial List
Contacts Count
Camera
Launches the Camera
Media Gallery
Images
Sounds
Videos
Messages
New Text Msg
New Pic Msg
Voicemail
Inbox
Sent Msgs
Outbox
Saved Msgs
Drafts
Msg Settings
Erase Msg
Settings
Bluetooth
Sounds
Alerts
Display
My Phone
Network
Security
Accessories
Note: The menu items on your phone can change depending on the services provided by your service provider.
Check with your service provider.
6Main menu
82-G1877-1EN.book Page 7 Thursday, August 23, 2007 10:53 AM
Basic navigation
Pressing your phone keys accesses the various
menus and other features of your phone. Some of
the basic keys that are used frequently are:
•
Left softkey: Selects items that appear on the
lower left of the display. At the home screen,
you can select
•
Right softkey: Selects items that appear on
the lower right of the display. At the home
screen, you can select
•
Navigation key: Scrolls through menus and
options. You can access the following
shortcuts from the home screen.
–Scroll left launches the Browser.
–Scroll right goes to Voice Memo.
–Scroll down displays the Recent Calls list.
Menu.
Contacts.
Press means to press a phone key. For
example, “Press the
call” tells you to physically press the
Send key to make a phone
Send key
on your phone.
Scroll means to use the Navigation key to move
though a list on the display. For example, “Scroll
through your Contacts list to choose a contact”
means to physically press the
Navigation key up
or down to scroll through the list on the display.
> (greater than symbol) tells you to select an
option from a menu or list. For example,
“
Menu > Settings” means to:
1. Press the left softkey to select Menu.
2. Scroll to the Settings option.
3. Press the left softkey to select Settings.
–Scroll up displays the custom menu.
•
OK key: Selects a menu item.
•
Back key: Returns to the previous menu level.
•
End key: Returns to the home screen.
Guide conventions
In this guide, the following conventions are used
when describing phone features.
Select means to press the left softkey, right
softkey, or
display. For example, “Select
physically press the left softkey to choose
from the display.
User Guide7
OK key to select an item seen on the
Menu” tells you to
Menu
82-G1877-1EN.book Page 8 Thursday, August 23, 2007 10:53 AM
2BASIC FUNCTIONS
This section explains basic functionality of your
phone. For more detailed explanations of your
phone’s features, please refer to later chapters.
Power up
To turn your phone on, press and hold the End key
and wait until the phone display lights up. To turn
your phone off, press the hold the
phone plays a musical chime and turns off.
End key until the
Make phone calls
Make sure you are in an area where a signal can
be received. Look for the signal strength icon on
the home screen. The more bars you see in this
symbol, the stronger the signal. If there are no
bars, move to where the signal strength is better.
When the phone has been idle for a time, it
changes to power save mode. When you see
“Power Save” on your phone’s screen, press any
key to return to normal operating mode. There
are several ways you can make a phone call:
Call using voice commands
You can use voice commands to call a contact
from your voice dial list or to dial a phone
number. For more information, see “Voice
Commands” on page 62.
Redial a number
1.Press the Send key twice to open your
call history.
2.Highlight a phone number or contact and
press the
Tip: To redial the last number called, received or
missed, press the
Send key.
Send key three times.
Answer phone calls
When a call comes in, the phone rings, vibrates,
or lights up. The phone number of the caller also
appears if it is not restricted. If the number is
stored in your Contacts directory, the contact’s
name appears. There are several ways you can
answer a phone call:
Call using a number
Answer using earpiece
1.Enter a phone number.
2.Press the Send key.
Press the Send key.
Answer using speakerphone
Call using a contact
Press the Speakerphone key.
1.Select Contacts to open your Contacts list.
2.Highlight a contact and press the
8Power up
Send key.
82-G1877-1EN.book Page 9 Thursday, August 23, 2007 10:53 AM
Answer using flip
You can set the phone to answer immediately
when you open the flip. This feature does not
apply to incoming data or fax calls. For more
information, see “Open to answer” on page 45.
End phone calls
To end a phone call press the End key or close
the flip.
Verify your phone number
To verify your phone number, select Menu >
Settings > My Phone > Phone Info >
Build Info.
Activate voice dialing
Create a custom menu
1.From the main screen, scroll up and hold.
2.Select Edit.
3.Select features from the list provided.
A check mark appears next to each
selection you make. You can also
remove check marks.
4.When you have chosen your menu options,
select
You new selection appear the next time you select
your custom menu.
Save.
1.Press the Send key once.
2.Follow the prompts.
For more information, see “Voice Commands” on
page 62.
Take a picture
1.Press and hold the Camera key to start
the camera.
2.Focus on the image and select
For more information, see “Camera” on page 24.
User Guide9
Capture.
82-G1877-1EN.book Page 10 Thursday, August 23, 2007 10:53 AM
3CALL FEATURES
This chapter describes call features such as
volume, holding calls, speed dialing, and
other features.
Volume control
There are several ways to control the volume of
your phone.
Adjust volume during a call
To adjust the earpiece volume during a call, press
the
Volume key up or down.
Use the speakerphone
Your phone has a built-in speakerphone. To turn
on the speakerphone, press the
key. The speakerphone icon appears on the home
screen when the speakerphone is on. To turn off
Speakerphone
Hold call
The Hold Call feature allows you to place
incoming calls on hold until you are ready to
answer them. See “Hold calls” on page 45.
Speed dialing
The Speed Dial feature allows you to assign a oneor two-digit shortcut to a contact. Before you can
use speed dialing, you must save a phone number
as a contact and assign a speed dial location to it.
See “Customize a number” on page 19.
To call a contact that has a speed dial location.
1.Enter the one- or two-digit speed
dial location.
2.Press the Send key.
the speakerphone, press the
key again.
Note: If you press the
an incoming call, you will answer the call.
Speakerphone key during
Silence an incoming call
To silence the phone without answering the call
press the
To silence the phone and answer the call, press
the
End key and then press the Send key.
Note: In the absence of voicemail, this feature
drops the call.
10Volume control
End key or select Silence.
Speakerphone
1-Touch dialing
The 1-Touch Dialing feature is the fastest way to
speed dial a contact that has a speed dial location.
See “1-Touch dialing” on page 46.
Voicemail
Configure your voicemail
Before your phone can receive voicemail
messages, you must set up a password and record
a personal greeting with your service provider.
82-G1877-1EN.book Page 11 Thursday, August 23, 2007 10:53 AM
When you have set up your voicemail, all
unanswered calls to your phone are automatically
transferred to voicemail, even if your phone is in
use or turned off.
1.Press and hold the
2.Follow the system prompts to create a
password and record a greeting.
1 key.
Check voicemail
When a voice message is received, your screen
displays a notification along with a voicemail
message icon at the top of your screen. The
symbol flashes if the message is urgent. If you see
a notification:
1.Select
voicemail number.
2.Follow the system prompts to retrieve
the message.
Note: To clear the screen without checking
messages, select
Call, which initiates a call to your
Ignore.
Data and fax calls
Your phone may be able to receive certain data or
faxes. See “Data and fax calls” on page 48.
Roaming calls
Control roaming calls
You can restrict your phone from making a call
when roaming. See “Roam option” on page 49.
Set roaming alert
You can set the phone to alert you when you roam
outside of your home service area. See “Roaming
service alert” on page 49.
Set roam ringer
You can set a ringer to indicate when an incoming
call will be subject to roaming charges. See
“Roam ringer” on page 41.
Set call guard
If you see only the voicemail message icon:
1.Select Menu > Messaging > Voicemail.
2.Follow the system prompts to retrieve
the message.
You can set the phone to warn you before you
answer or place a call while roaming. See “Roam
call alert” on page 50.
Set voicemail alert
You can set the phone to beep or vibrate every five
minutes to remind you that you have voicemail.
For more information, see “Alerts” on page 42.
User Guide11
82-G1877-1EN.book Page 12 Thursday, August 23, 2007 10:53 AM
Emergency services
Call emergency service
You can call an emergency code, even if your
phone is locked or your account is restricted.
When you call, your phone enters Emergency
mode. This enables the emergency service
exclusive access to your phone to call you back, if
necessary. To make or receive regular calls after
dialing the code, you must exit this mode.
To place dial an emergency code:
1.Enter your 3-digit emergency code.
2.Press the
Note: Regardless of your 3-digit emergency code
(911, 111, 999, 000, etc.), your phone operates
as described.
Send key.
Exit emergency services
When you have completed the emergency call:
1.Select Exit.
2.Select
Note: To determine who has access to your
location, see “Location” on page 49.
Exit again to confirm your choice.
Airplane mode
While in an airplane, you can set your phone to
Airplane mode where your phone does not emit
RF signals. See “Airplane mode” on page 44.
12Emergency services
82-G1877-1EN.book Page 13 Thursday, August 23, 2007 10:53 AM
4TEXT ENTRY
You can enter letters, numbers, and symbols in
contacts, text messages, and your banner.
Text entry modes
The current text entry mode (and capitalization
setting, when applicable) are indicated by icons.
The text entry screen has the following features:
1.Characters
remaining that
you can type.
Allowed length
of messages can
vary depending on
your service.
2.Text entry fields.
3.Current capitalization setting.
4.Current text entry mode.
There are six text entry modes:
Enter numbers
•To enter a number while in Numbers Only
mode, press a number key once.
•To enter a number while in Normal Alpha or
Rapid Entry mode, press and hold a number
key until the number appears on the screen.
Enter words letter by letter
1.Press a key once for the first letter, twice for
the second letter, and so on. If your phone is
set to Spanish, French, or Portuguese,
accented letters are available.
2.Wait for the cursor to move right and enter
the next letter.
Note: To enter a space, press the
Space # key.
Enter words quickly
When you press a series of keys using Rapid Entry
mode, your phone checks its dictionary of
Case ChangeRapid Entry
Numbers OnlyAdd Symbol
Normal AlphaRapid Entry
Note: The mode you start in depends on the task
you are doing. For example, when entering a
phone number, you’re in Numbers Only mode.
When entering a name for a contact, you’re in
normal text mode.
User Guide13
common words and guesses at the word you are
trying to spell.
1.For each letter of the word you want, press
the key once. For example, to enter the word
“any” press the
2.If the word doesn’t match what you want,
press the
word matches.
3.When you see the word you want, press the
Space # key.
0 Next key to look at other
2 > 6 > 9 keys.
82-G1877-1EN.book Page 14 Thursday, August 23, 2007 10:53 AM
Enter symbols
While entering text in Normal Alpha mode, you
can enter symbols by pressing the
1 key until you
see the symbol you want. Using this method, you
have access to the following symbols:
. @ ? ! - , & : ‘ ]
To access the full set of symbols:
1.From the text entry screen, select Options >
Add Symbol.
2.Scroll up or down to view the list of symbols.
3.Press the number key corresponding to the
symbol to enter it.
Change default text entry mode
You can change the default text entry mode when
creating a text message. For more information,
Capitalization
You can change capitalization at any time while
entering text. Simply press the
choose upper or lower case while in Normal
Alpha mode.
Shift * key to
see “Default text” on page 37.
Change modes
Sometimes you need to change modes. For
example, to enter numbers in an email address
while in Normal Alpha mode, you must change to
numbers only mode, enter the numbers, and then
change back to Normal Alpha mode to complete
the address.
To change text entry modes, press and hold the
Shift * key until the icon for the mode you want
appears at the top of the screen. You can also
select
14Text entry modes
Options then select a different mode.
82-G1877-1EN.book Page 15 Thursday, August 23, 2007 10:53 AM
Text entry quick reference
This table gives instructions for entering letters, numbers, and symbols.
To...Do this...
Enter a letterUse Normal Alpha mode and press a key until you see the letter your want.
For more options, see “Text entry modes” on page 13.
Enter a numberUse Numbers Only mode and press a key. For more options, see “Text
entry modes” on page 13.
Enter a symbolIn either Normal Alpha mode, press the
you want. For more options, see “Text entry modes” on page 13.
Enter a spacePress the
Erase a characterPress the
Erase all charactersPress and hold the
Space # key.
Back key.
Back key.
Move cursor right or leftScroll left or right.
Move cursor up or downScroll up or down.
Change text entry modesPress and hold the
Capitalize any letterIn Normal Alpha mode, press the
Lowercase any letterIn Normal Alpha mode, press the
Initial capsIn Normal Alpha mode, press the
Shift * key.
Shift * key. Choose uppercase.
Shift * key. Choose lowercase.
Shift * key. Choose sentence case.
1 key until you find the symbol
Select soft options on screenPress the appropriate left or right softkey.
User Guide15
82-G1877-1EN.book Page 16 Thursday, August 23, 2007 10:53 AM
5RECENT CALLS
Call lists
Details on the calls you made, received, or missed
are stored in the Recent Calls list and are
identified by the following icons:
Outgoing call
Incoming call
Missed call (flashing)
View recent calls
1.Select Menu > Recent Calls and one of the
following:
–
All Calls to view all calls made
or received.
–
Incoming to view calls answered.
–
Outgoing to view calls made.
–
Missed to view calls received, but
not answered.
2.Highlight a recent call.
3.Press the
select
Send key to call the number or
Options and one of the following:
–Erase Record deletes the call from the
call list.
Note: If the phone number is classified as
“secret,” you must enter your four-digit lock code
to view or edit it.
Deal with a missed call
When you have missed a call, “Missed Call”
appears on your screen. You can do one of
the following:
•To clear the screen, select
•To view the call details, select
OK.
Calls and
press the OK key.
•To return the call, select
Calls and press the
Send key.
Set alert for missed calls
You can set an alert to beep every five minutes
after you have missed a call. See “Alerts” on
page 42.
Erase call lists
You can erase your phone’s call lists.
–
Save creates a new contact.
–
Send Text Msg sends a text message to
the number.
–
Send Picture Msg sends a picture
1.Select Menu > Recent Calls >
Erase Call List > All, Incoming, Outgoing,
or
Missed.
2.Select Yes.
message to the number.
16Call lists
Loading...
+ 56 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.