KROHNE H250-RR User Manual

Variable area flowmeter (rotameter)

Application Information Sheet

Company name:

Address:

City, State, zip:

End user (destination):

General Information

Equipment tag #

Piping information,

Meter orientation,

Meter scale range,

Horizontal

Process conditions

Medium name,

Medium properties,

Medium temperature,

System pressure,

Fow rate,

Equipment specifications

Agency approvals,

FM IS (C1, D1)

Accuracy class,

Measuring range,

Cone material,

Float material,

Process connections,

ASME 150#

Pointer damping,

Limit switch (s),

Integrated valve,

dP pressure regulator,

Output signal,

Communications,

Pipe size:

Vertical

Density

Normal

Normal

Normal

Without

1.0%

10:1

SST

SST

Size:

Without

Without

Without

Without

No, local display only

HART

Profibus PA

inltet location

bottom valve

1-limit switch

yes

ASME 300#

Aluminum

glass

100:1

SIL1 certififed

FM XP (C1, D1)

1.6%

Flow direction from left to right

Flow direction from bottom to top (standard)

Contact name:

Phone number:

Email address:

inch NPT

Foundation Fieldbus

current output

outlet location

top valve

2-limit swtiches

ASME 600#

PTFE

PTFE lined

2.5%

FM NI (C1, D2)

SIL2 certified

pulse output

describe:

ASME 900#

Titanium

Titanium

4.0%

FDA approved

6.0%

Triament

Ceramic

ASME 1500#

TFM/ ceramic

Polypropylene

(recommended for gas applications)

Material:

Flow direction from top to bottom

Flow direction from right to left

to

Sp. gravity

Minimum

Minimum

Minimum

liquid state

Viscosity

Maximum

Maximum

Maximum

gas state

°F

psia

units:°Cpsig

bara

barg

page 1 of 2

Raised face

H250 Series H250 H/U/C/HT Special Series DK32 Series DK37 Series

• Accuracy class 1.6% • Accuracy class 2.5%

• Accuracy class 4.0%

• Accuracy class 2.5%

• SIL 2 compliant

• Spring-loaded for horizontal or

• liquids or gas service

• liquid or gas service

• Totalizer

vertical flow down installation

• Integrated valve option

• Integrated valve option

• 2-wire analog output 4-20mA HART

• dP regulator valve option

• dP regulator option

• Foundation Fieldbus or Profibus PA

• 2 optional limit switches

• Food & Pharma compliant

• PTFE or ceramic lined options

or mA analog output

• SST indicator housing option

• High temperatures to 752°F

• High pressures to 43,000 psi

VA40 Series VA45 Series GA24 Series

DK46,47,48 & 800 Series

• Accuracy class 1.0%

• Accuracy class 2.5%

• Accuracy class 1.0%

• Accuracy 1% to 4%

• Glass cone protected by metal

• Glass cone protected by metal • Liquid or gas service

• Integrated valve option

• Liquid or gas service • Gas service at low pressures • 2 optional limit switches

• dP regulator option

• Food & Pharma compliant • Food & Pharma compliant

• PTFE lined option

• 2 optional limit switches

Metal measuring cone

Glass measuring cone

• Increased measuring range 100:1

KROHNE Variable area (rotameters)

Notes/ comments:

Positive material identification (PMI)

Material test certification

Construction drawing (GA) for approval

Certified drawing (GA)

Certificate of compliance

KROHNE standard (IOM + calibration certificate)

Radiographic examination (RT)

Dye penetration test (PT)

Inspection certificate 3.1

Leakage test + certificate

Pressure test

Hardness test

NACE MR0175

Confirmation of accuracy

5-point calibration certificate

10-point calibration certificate

Equipment tag #

Documentation

✔

Variable area flowmeter (rotameter)

Application Information Sheet

(QA/QC)

page 2 of 2