Page 1
• Before setting up your printer, examine the safety information in the General Information Guide and the User’s Guide, including in
PDF format on the Utilities and Documentation CD-ROM.
Dispose of the packing material according to your local regulations.
Page 2
1
12
13
14
15
7
5-6
x
100 mm (3.9 in)
100 mm (3.9 in)
156 mm
(6.1 in)
405 mm (15.9 in)
249 mm
(9.8 in)
655 mm (25.8 in)
655 mm (25.8 in)
150 mm (5.9 in)
150 mm (5.9 in)
360 mm (14.2 in)
348 mm (13.7 in)
283 mm (11.1 in)
2
8
100 mm (3.9 in)
587 mm (23.1 in)
387 mm (15.2 in)
3
9
4
100 mm (3.9 in )
10
5
11
6
Max. 150
sheets
60-90 g/m
(16-24 lb)
2
Page 3
English
15
USB
Para lle l
1. Connect your PagePro 1300W to your PC by
means of an interface cable (parallel or USB).
In case the ‘Found New Hardware’ (Win2000/
XP) or the ‘Add New Hardware’ wizard
(Win98/Me) on your PC shows up, cancel it.
CAUTION
Do not use the ‘Found New Hardware’ or
‘Add New Hardware’ wizard to install the
PagePro 1300W driver and utilities.
2. Insert the PagePro 1300W Utilities & Documentation CD-ROM in the CD-ROM drive of
your PC.
3. The CD-ROM Installer automatically starts. If
not, browse with the Windows Explorer to the
CD-ROM and double-click on
CAUTION
Do not use the ‘Add Printer’ wizard to install
the PagePro 1300W driver and utilities.
4. Follow the instructions on the screen.
5. When the driver and utilities are installed,
remove the CD-ROM and store it in a safe
place.
setup.exe
.
16
From the Windows menu bar, select:
Start
1.
2. Right-click on the PagePro 1300W printer
3. From the dropdown menu, select
4. Select (Win98/Me) :
5. Select the
6. Select the printer defaults you use, like the
7. Click on
8. Click on OK and close all subsequent win-
( ) Æ
icon
(Win2000/XP) :
media size, the orientation of your media,
etc.
Apply
dows
Paper
Settings
Printer Properties
tab
Printers
Æ
Printing Preferences
Properties
17
From the Windows menu bar, select:
Start
1.
2. Select:
3. Select:
4. Select the
5. From the dropdown menu, select
6. Close the Status Display by clicking on
( ) Æ
PagePro 1300W Utilities
PagePro 1300W Status
tus Sheet
status sheet, showing all control panel situations. Keep this document near your printer
for reference.
(the Status Display icon remains on the Windows menu bar).
Programs
Print
tab
Print Sta-
. Your PagePro 1300W prints a
Notes
:
• Examine the PagePro 1300W User’s Guide (in
pdf format on the PagePro 1300W Utilities &
Documentation CD-ROM) for detailed information about working with the printer driver,
working with the status display, using media,
replacing consumables, maintaining the
printer, troubleshooting and printer specifications.
• The General Information Guide lists sources
of service and support for many areas of the
world. It also contains worldwide internet and
ordering approved media and consumables
information.
Note for Windows 98/Me USB users
When you are using a USB connection and you
cannot select the USB port during the installation of the KONICA MINOLTA PagePro 1300W
driver and utilities in Windows 98 or Windows
Me, cancel the CD-ROM installation procedure
and remove the PagePro 1300W Utilities & Documentation CD-ROM from the PC’s CD-ROM
drive. Then proceed as follows :
1. Disconnect the USB cable from the printer
side (leave the connector on the PC side).
2. Turn off the printer and the PC. Then turn
both on again. Wait until the PC and printer
are ready.
3. Insert the PagePro 1300W Utilities & Documentation CD-ROM in the CD-ROM drive of
your PC. When the CD-ROM Installer shows
up, cancel it.
4. Connect the USB cable with the printer. Now,
the ‘New Hardware Found’ wizard shows up.
Wait until the ‘Add New Hardware’ wizard
screen appears.
5. In the ‘Add New Hardware’ screen, select
Automatic search for a better driver (Recommended)
6. After a few moments, a list of USB
Support drivers
appear. Select one of the drivers shown (the
selected language does not matter). Click on
OK
.
7. Wait until Windows finished the installation
and then click on
installed the USB Printing Support driver
(this is not the printer driver).
8. The ‘New Hardware Found’ wizard shows up
for a second time. Wait until the (second)
‘Add New Hardware’ wizard displays. Now,
select
driver using the (second) wizard!
9. Browse the PagePro 1300W Utilities & Documentation CD-ROM and double-click on
setup.exe
10.Proceed with the driver installation. You
should now be able to select ‘USB001’.
. Then click on
on the CD-ROM will
Finish
Cancel
. Do not install the printer
.
Next
.
Printing
. You have now
(4136-7742-01A)
Loading...