Konica Minolta DI1611, DI2011 Manual

User Manual

www.konicaminolta.net

Di1611/Di2011

Contents

Contents

1 Introduction

1.1	Introduction ...................................................................................	1-2
	We Want You to Be a Satisfied Customer..................................	1-2
1.2	Explanation of Manual Conventions ...........................................	1-3
1.3	Explanation of Basic Concepts and Symbols ............................	1-4
	Paper Feeding ............................................................................	1-4
	“Width” and “Length”...................................................................	1-5
	Paper Orientation .......................................................................	1-5
1.4	Energy Star®..................................................................................	1-6
	What is an ENERGY STAR® Product? ......................................	1-6
1.5	Safety Information.........................................................................	1-7
	Warning and Precaution Symbols ..............................................	1-7
	Meaning of Symbols ...................................................................	1-7
	WARNING ..................................................................................	1-8
	CAUTION ...................................................................................	1-9
	Precautions for Routine Use.....................................................	1-10
	USER INSTRUCTIONS
	CE Marking (Declaration of Conformity)...................................	1-10
	Laser Safety .............................................................................	1-11
	Laser Safety Label....................................................................	1-14
	Ozone Release.........................................................................	1-14

2 Precautions

2.1	Installation Precautions................................................................	2-2
	Installation Site ...........................................................................	2-2
	Power Source .............................................................................	2-2
	Space Requirements ..................................................................	2-3

2.2	Operation Precautions..................................................................	2-4
	Operating Environment...............................................................	2-4
	Proper Use .................................................................................	2-4
	Transporting the Machine...........................................................	2-5
	Care of Machine Supplies ..........................................................	2-5
	Storage of Copies.......................................................................	2-6
2.3	Legal Restrictions on Copying ....................................................	2-7
2.4	Components and Their Functions...............................................	2-8

Di1611/Di2011

i

				Contents
		2.5	Part Names and Their Functions ..............................................	2-10
			Main Unit..................................................................................	2-10
			Inside of Main Unit ...................................................................	2-12
			Document Feeder (Optional) ...................................................	2-13
			Multiple Bypass (Optional) .......................................................	2-14
			Paper Feed Unit (Optional) ......................................................	2-15
			Job Separator (Optional)..........................................................	2-16
		2.6	Names of Control Panel Parts and Their Functions................	2-17
			Control Panel Parts and Their Functions .................................	2-17
			Display Indications ...................................................................	2-20
			Adjusting the Angle of the Display ...........................................	2-21
		2.7	Power Supply..............................................................................	2-22
			To turn on the machine ............................................................	2-22
			To turn off the machine ............................................................	2-22
			Default Settings........................................................................	2-22
			Auto Panel Reset .....................................................................	2-23
			Energy Save Mode ..................................................................	2-23
			Auto Shut Off ...........................................................................	2-23
			Queued Copy Jobs ..................................................................	2-24
3		Basic Operations
		3.1	Making Copies ..............................................................................	3-2
			To make a simple copy ..............................................................	3-2
		3.2	Loading Paper...............................................................................	3-4
			Loading Paper Into the Paper Tray ............................................	3-5
			To load paper into the 1st Tray ..................................................	3-5
			To load paper into the 2nd Tray .................................................	3-7
		3.3	Loading the Document.................................................................	3-9
			With the Document Feeder ........................................................	3-9
			With the Original Glass ............................................................	3-11
			To position sheet documents ...................................................	3-11
			To position translucent or transparent documents ...................	3-13
			To position a book....................................................................	3-15
			To load documents of mixed sizes...........................................	3-16
		3.4	Stopping/Restarting/Canceling a Copy Job.............................	3-18
		3.5	Confirmation Mode.....................................................................	3-19
			To check the counters..............................................................	3-20
		3.6	Reducing Electricity Usage .......................................................	3-22

ii	Di1611/Di2011

Contents

4	Useful Operations
	4.1	Specifying a Zoom setting ...........................................................	4-2
		To enlarge/reduce a standard-sized document to a different
		standard size ..............................................................................	4-2
	4.2	Using the “Auto/Photo” Function................................................	4-4
		To make sharp copies of illustrations or photos .........................	4-4
	4.3	Copying Onto Various Types of Media .......................................	4-6
		To copy onto OHP transparencies .............................................	4-6
		To copy onto label sheets...........................................................	4-8
		To copy onto envelopes (non-standard size) ...........................	4-11
		To copy onto postcards ............................................................	4-14

5	Before Making Copies
	5.1	Paper ..............................................................................................	5-2
		Paper Types ...............................................................................	5-2
		Paper Sizes ................................................................................	5-3
		Paper Capacity ...........................................................................	5-4
		Unsuitable Paper ........................................................................	5-5
	5.2	Print Area .......................................................................................	5-6
	5.3	Paper Storage................................................................................	5-7
	5.4	Making Copies on Manually Fed Paper.......................................	5-8
		Paper That Can Be Fed Manually ..............................................	5-8
		Adjusting the Multiple Bypass.....................................................	5-9
		Loading Paper Into the Bypass Trays ......................................	5-10
		To load plain paper...................................................................	5-10
		Loading Special Paper Into the Bypass Trays..........................	5-11
		To load postcards .....................................................................	5-11
		To load envelopes ....................................................................	5-12
		To load OHP transparencies ....................................................	5-14
		To load label sheets .................................................................	5-15
		Copying Onto Manually Fed Paper ..........................................	5-16
		To copy using the Manual Bypass............................................	5-16
		To copy using the Multiple Bypass ...........................................	5-19
	5.5	Selecting the Paper Source........................................................	5-22
		To make copies using the Auto Paper function ........................	5-22
		To copy with a manually selected paper size ...........................	5-23
		To load special paper into the 1st Tray ....................................	5-24
		Automatically Selecting the Paper Source ...............................	5-25
		Order for Automatically Switching Paper Drawers ...................	5-26

Di1611/Di2011

iii

			Contents
		5.6	Original Documents ...................................................................	5-27
			Using the Document Feeder ....................................................	5-27
			Document Types ......................................................................	5-27
			Documents of Uniform Sizes ...................................................	5-28
			Mixed Width Document Sizes (AFR-19) ..................................	5-28
			Precautions Concerning the Documents .................................	5-29
		5.7	Specifying a Zoom Setting ........................................................	5-30
			Zoom Settings ..........................................................................	5-30
			To make copies using the “AUTO” zoom setting .....................	5-31
			To make copies using a fixed zoom setting .............................	5-32
			To make copies using a specific zoom setting.........................	5-33
			To make copies using the “X/Y Zoom” function .......................	5-34
		5.8	Specifying the Copy Density (“Auto/Photo” Function) ..........	5-36
			To make copies after specifying a copy density ......................	5-37
		5.9	Interrupting Copy Jobs ..............................................................	5-38
			To interrupt a copy job .............................................................	5-38
6		Advanced Copy Operations
		6.1	Single-Sided Copies.....................................................................	6-2
			To make copies using the “2in1” (or “4in1”) copy function .........	6-2
			To make copies using the “Book Separation” function ..............	6-4
		6.2	Double-Sided Copies ...................................................................	6-6
			Double-sided copying is not possible under the following
			conditions:..................................................................................	6-7
			To make double-sided copies using the Original Glass .............	6-8
			To make double-sided copies using the Document Feeder.......	6-9
		6.3	Finishing Copies (“Sort” and “Group” functions) ..................	6-10
			Notes on Using the “Sort” and “Group” Functions ...................	6-12
			Shift Sorting .............................................................................	6-12
			Crisscross Sorting ....................................................................	6-12
			Shift Grouping ..........................................................................	6-13
			Crisscross Grouping ................................................................	6-13
			Specifying Finishing .................................................................	6-14
			To make copies using a Finishing function ..............................	6-14
		6.4	Erasing Sections of Copies .......................................................	6-15
			Precautions on the Erased Margin Location ............................	6-15
			To make copies using an Erase setting ...................................	6-16
		6.5	Negative/Positive Inverted Copying .........................................	6-17
			To make copies using the negative/positive inverted copy
			function ....................................................................................	6-17

iv	Di1611/Di2011

Contents

6.6	Making Copies for Filing (“File Margin” function) ...................	6-18
	Precautions on the Binding Margin Location ............................	6-18
	To make copies using the “File Margin” function......................	6-19
6.7	Programmed Copy Jobs.............................................................	6-20
	To store a copy program ..........................................................	6-20
	To recall a copy program..........................................................	6-22
6.8	Access Numbers .........................................................................	6-23
	To enter an access number......................................................	6-23

7 Utility Mode – Copy Functions

7.1	Utility Menu Commands ...............................................................	7-3
7.2 Specifying Machine Settings (“MACHINE SETTING” Menu).....		7-5
	To select the “MACHINE SETTING” menu ................................	7-6
	To set the “AUTO PANEL RESET” function...............................	7-7
	To set the “ENERGY SAVE MODE” (preheat mode) function ...	7-8
	To set the “AUTO SHUT OFF” function......................................	7-9
	To specify the scanning image quality
	(“DENSITY(ADF)” function) ......................................................	7-11
	To specify the scanning image quality
	(“DENSITY(BOOK)” function)...................................................	7-12
	To specify the printing density (“PRINT DENSITY” function) ...	7-13
	To set the “LCD CONTRAST” function.....................................	7-14
	To set the “LANGUAGE” function.............................................	7-15
7.3 Setting Up the Paper Sources
	(“PAPER SOURCE SETUP” Menu) ............................................	7-16
	To select the “PAPER SOURCE SETUP” menu ......................	7-17
	To specify the automatic paper size detection units
	(“INCH/METRIC” function)........................................................	7-18
	To specify the size of paper loaded into the 1st Tray
	(“TRAY1 PAPER” function) ......................................................	7-19
	To set the “PAPER TYPE” function ..........................................	7-22
7.4 Specifying User-Managed Service Tasks
	(“USER MANAGEMENT” Menu).................................................	7-23
	To perform the “DRUM DEHUMIDIFY” function.......................	7-24
	To perform the “TONER REPLENISHER” function ..................	7-25
7.5	Specifying Administrative Settings
	(“ADMIN. MANAGEMENT” Menu)..............................................	7-26
	To select the “ADMIN. MANAGEMENT” menu ........................	7-27
	To set the “AUTO SHUT OFF” function....................................	7-28
	To turn on/off user (section) management ...............................	7-30
	To register user (section) access numbers ..............................	7-31
	To change/delete user (section) access numbers....................	7-33
	To display/clear the total count for a specific account ..............	7-35
Di1611/Di2011		v

		Contents
		To clear the total counts for all accounts .................................	7-37
		7.6 Specifying Copy Settings ..........................................................	7-38
		“COPY SETTING 1” & “COPY SETTING 2” menus.................	7-38
		To select the “COPY SETTING 1” menu .................................	7-40
		To set the “PAPER PRIORITY” function ..................................	7-41
		To set the “DENSITY PRIORITY” function ..............................	7-42
		To set the “AUTO” density level
		(“DENSITY LEVEL(A)” function) ..............................................	7-43
		To set the manual density level
		(“DENSITY LEVEL(M)” function) .............................................	7-44
		To set the “BINDING POS.” function .......................................	7-45
		To specify the binding width (“MARGIN SETTING” function) ..	7-46
		To specify the erased width (“ERASE SETTING” function) .....	7-47
		To set the “SMALL ORIGINAL” function ..................................	7-48
		To select the “COPY SETTING 2” menu .................................	7-49
		To set the “MIXED ORIGINAL” function ..................................	7-50
		To set the “COPY PRIORITY” function ....................................	7-51
		To specify the default finishing mode
		(“OUTPUT PRIORITY” function) ..............................................	7-52
		To set the “4IN1 COPY ORDER” function ...............................	7-53
		To set the “CRISSCROSS MODE” function ............................	7-54
		To set the “DUPLEX COPY” function ......................................	7-55
	8 Error Messages
		8.1 When the Message “TONER EMPTY” Appears .........................	8-2
		To replace the toner bottle .........................................................	8-2
		8.2 When the Message “PAPER JAM” Appears ..............................	8-5
		To clear a paper misfeed in the Duplex Unit ..............................	8-5
		To clear a paper misfeed in the main unit or 1st Tray................	8-6
		To clear a paper misfeed in the Paper Feed Unit ....................	8-10
		To clear a paper misfeed in the Multiple Bypass .....................	8-11
		8.3 When the Message “ORIGINAL DOC.JAM” Appears ..............	8-13
		To clear a misfeed in the Automatic Document Feeder
		(AF-12) .....................................................................................	8-13
		To clear a misfeed in the Duplexing Document Feeder
		(AFR-19) ..................................................................................	8-16
		8.4 Main Error Messages and Their Remedies ..............................	8-18

vi	Di1611/Di2011

Contents

9	Troubleshooting
	9.1 When Incorrect Copies Are Produced ........................................		9-2
	9.2 When Copying Is Not Performed Correctly ................................		9-4
10	Appendix
	10.1	Specifications..............................................................................	10-2
		Main Unit Di1611/Di2011..........................................................	10-2
		Duplex Unit AD-17....................................................................	10-3
		Duplexing Document Feeder AFR-19 ......................................	10-4
		Mixed Width Document Sizes (AFR-19)...................................	10-4
		Automatic Document Feeder AF-12 .........................................	10-5
		Paper Feed Unit PF-126...........................................................	10-5
		Shifting Unit OT-103 .................................................................	10-5
		Job Separator JS-204...............................................................	10-6
		Multiple Bypass MB-6...............................................................	10-6
	10.2 Care of the Machine ....................................................................		10-7
		Cleaning ...................................................................................	10-7
		Housing ....................................................................................	10-7
		Original Glass ...........................................................................	10-7
		Document Pad..........................................................................	10-7
		Control Panel............................................................................	10-8
	10.3	Function Combination Table......................................................	10-9
		Function Combination Table for Di1611 ...................................	10-9
		Function Combination Table for Di2011 .................................	10-10
		Function Combination Codes .................................................	10-10
	10.4 Paper Size and Zoom Ratio Tables .........................................		10-11
		Copy Paper Sizes...................................................................	10-11
		Zoom Ratios ...........................................................................	10-12
11	Index
	11.1	Index.............................................................................................	11-2

Di1611/Di2011

vii

Contents

viii	Di1611/Di2011

Introduction Chapter 1

Introduction 1

Introduction Chapter 1

1	1.1 Introduction

1.1Introduction

We Want You to Be a Satisfied Customer

Thank you for choosing this machine.

This User Manual describes the functions, operating procedures, precautions, and basic troubleshooting for this machine. Before using the machine, be sure to read the User Manual thoroughly in order to ensure that you use it efficiently. After you have gone through the manual, store it in the holder on the machine and keep it handy at all times.

Note that some of the illustrations of the machine used in the User Manual may be different from what you actually see on your machine.

1-2	Di1611/Di2011

1.2 Explanation of Manual Conventions	1

1.2Explanation of Manual Conventions

The marks and text formats used in this manual are described below.

WARNING

Failure to observe instructions highlighted in this manner may result in fatal or critical injuries.

Observe all warnings in order to ensure safe use of the copier.

CAUTION

Failure to observe instructions highlighted in this manner may result in serious injuries or property damage.

Observe all cautions in order to ensure safe use of the copier.

Note*

(*May also appear as “Important” or “Tip”)

Text highlighted in this manner contains useful information and tips to ensure safe use of the machine.

1	The number 1 as formatted here indicates the
	first step of a sequence of actions.
2	Subsequent numbers as formatted here	An illustration inserted here shows
	indicate subsequent steps of a sequence of
		what operations must be performed.
	actions.

?Text formatted in this style provides additional assistance.

Text formatted in this style describes the

action that will ensure the desired results are achieved.

[Copy] key

The names of keys on the control panel are written as shown above.

Introduction Chapter 1

Di1611/Di2011

1-3

Introduction Chapter 1

1	1.3 Explanation of Basic Concepts and Symbols

1.3Explanation of Basic Concepts and Symbols

The use of words and symbols in this manual are explained below.

Paper Feeding

During printing, paper is supplied from the right side of the machine and fed into the output tray on top or the output option at the left with the printed surface of the page facing down. The paper feed direction is shown by the arrows in the diagram below.

1-4	Di1611/Di2011

1.3 Explanation of Basic Concepts and Symbols

“Width” and “Length”

Whenever paper dimensions are mentioned in this manual, the first value always refers to the width of the paper (shown as “X” in the illustration) and the second to the length (shown as “Y”).

Paper Orientation

Lengthwise ()

If the width (X) of the paper is shorter than the length (Y), the paper has a vertical or portrait orientation, indicated by either “L” or .

Crosswise ()

If the width (X) of the paper is longer than the length (Y), the paper has a horizontal or landscape orientation, indicated by either “C” or .

1

Introduction Chapter 1

Di1611/Di2011

1-5

Introduction Chapter 1

1	1.4 Energy Star®

1.4Energy Star®

As an ENERGY STAR® Partner, we have determined that this machine meets the ENERGY STAR® Guidelines for energy efficiency.

What is an ENERGY STAR® Product?

An ENERGY STAR® product has a special feature that allows it to automatically switch to a “low-power mode” after a period of inactivity. An ENERGY STAR® product uses energy more efficiently, saves you money on utility bills and helps protect the environment.

1-6	Di1611/Di2011

1.5 Safety Information	1

1.5Safety Information

This section contains detailed instructions on the operation and maintenance of this machine. To achieve optimum utility of this device, all operators should carefully read and follow the instructions in this manual. Please keep this manual in a handy place near the machine.

Please read the next section before using this device. It contains important information related to user safety and preventing equipment problems.

Make sure you observe all of the precautions listed in this manual.

*Ver06

Please note that some parts of the contents of this section may not correspond with the purchased product.

Warning and Precaution Symbols

WARNING:	Ignoring this warning could cause serious injury or even death.
CAUTION:	Ignoring this caution could cause injury or damage to property.

Meaning of Symbols

A triangle indicates a danger against which you should take precaution.

This symbol warns against cause burns.

A diagonal line indicates a prohibited course of action.

This symbol warns against dismantling the device.

A black circle indicates an imperative course of action.

This symbol indicates you must unplug the device.

Introduction Chapter 1

Di1611/Di2011

1-7

Introduction Chapter 1

1	1.5 Safety Information

WARNING

•Do not modify this product, as a fire, electrical shock, or breakdown could result. If the product employs a laser, the laser beam source could cause blindness.

•Do not attempt to remove the covers and panels which have been fixed to the product. Some products have a high-voltage part or a laser beam source inside that could cause an electrical shock or blindness.

•Use only the power cord supplied in the package. If a power cord is not supplied, only use the power cord and plug that is specified in POWER CORD INSTRUCTION. Failure to use this cord could result in a fire or electrical shock.

•Use the power cord supplied in the package only for this machine and NEVER use it for any other product. Failure to observe this precaution could result in a fire or electrical shock.

•Use only the specified power source voltage. Failure to do that could result in a fire or electrical shock.

•Do not use a multiple outlet adapter to connect any other appliances or machines. Use of a power outlet for more than the marked current value could result in a fire or electrical shock.

Do not unplug and plug in the power cord with a wet hand, as an electrical shock could result.

Plug the power cord all the way into the power outlet. Failure to do this could result in a fire or electrical shock.

•Do not scratch, abrade, place a heavy object on, heat, twist, bend, pull on, or damage the power cord. Use of a damaged power cord (exposed core wire, broken wire, etc.) could result in a fire or breakdown.

Should any of these conditions be found, immediately turn OFF the power switch, unplug the power cord from the power outlet, and then call your authorized service representative.

•Do not use an extension cord, in principle. Use of an extension cord could cause a fire or electrical shock. Contact your authorized service representative if an extension cord is required.

Do not place a flower vase or other container that contains water, or metal clips or other small metallic objects on this product. Spilled water or metallic objects dropped inside the product could result in a fire, electrical shock, or breakdown.

Should a piece of metal, water, or any other similar foreign matter get inside the product, immediately turn OFF the power switch, unplug the power cord from the power outlet, and then call your authorized service representative.

•Do not keep using this product, if this product becomes inordinately hot or emits smoke, or unusual odor or noise. Immediately turn OFF the power switch, unplug the power cord from the power outlet, and then call your authorized service representative. If you keep on using it as is, a fire or electrical shock could result.

•Do not keep using this product, if this product has been dropped or its cover damaged. Immediately turn OFF the power switch, unplug the power cord from the power outlet, and then call your authorized service representative. If you keep on using it as is, a fire or electrical shock could result.

Do not throw the toner cartridge or toner into an open flame. The hot toner may scatter and cause burns or other damage.

Connect the power cord to an electrical outlet that is equipped with a grounding terminal.

1-8		Di1611/Di2011

1.5 Safety Information	1

CAUTION

•Do not use flammable sprays, liquids, or gases near this product, as a fire could result.

•Do not leave a toner unit or drum unit in a place within easy reach of children. Licking or ingesting any of these things could injure your health.

•Do not let any object plug the ventilation holes of this product. Heat could accumulate inside the product, resulting in a fire or malfunction.

•Do not install this product at a site that is exposed to direct sunlight, or near an air conditioner or heating apparatus. The resultant temperature changes inside the product could cause a malfunction, fire, or electrical shock.

•Do not place the product in a dusty place, or a site exposed to soot or steam, near a kitchen table, bath, or a humidifier. A fire, electrical shock, or breakdown could result.

•Do not place this product on an unstable or tilted bench, or in a location subject to a lot of vibration and shock. It could drop or fall, causing personal injury or mechanical breakdown.

•After installing this product, mount it on a secure base. If the unit moves or falls, it may cause personal injury.

•Do not store toner units and PC drum units near a floppy disk or watch that are susceptible to magnetism. They could cause these products to malfunction.

The inside of this product has areas subject to high temperature, which may cause burns. When checking the inside of the unit for malfunctions such as a paper misfeed, do not touch the locations (around the fusing unit, etc.) which are indicated by a “CAUTION HOT” caution label.

Do not place any objects around the power plug as the power plug may be difficult to pull out when an emergency occurs.

The socket-outlet shall be installed near the machine and shall be easily accessible as the power plug may be difficult to pull out when an emergency occurs.

•Always use this product in a well ventilated location. Operating the product in a poorly ventilated room for an extended period of time could injure your health. Ventilate the room at regular intervals.

•Whenever moving this product, be sure to disconnect the power cord and other cables. Failure to do this could damage the cord or cable, resulting in a fire, electrical shock, or breakdown.

•When moving this product, always hold it by the locations specified in the User manual or other documents. If the unit falls it may cause severe personal injury. The product may also be damaged or malfunction.

•Remove the power plug from the outlet more than one time a year and clean the area between the plug terminals. Dust that accumulates between the plug terminals may cause a fire.

•When unplugging the power cord, be sure to hold onto the plug. Pulling on the power cord could damage the cord, resulting in a fire or electrical shock.

Introduction Chapter 1

Di1611/Di2011

1-9

Introduction Chapter 1

1			1.5 Safety Information
	Precautions for Routine Use

•Do not store toner units, PC drum units, and other supplies and consumables in a place subject to direct sunlight and high temperature and humidity, as poor image quality and malfunction could result.

•Do not attempt to replace the toner unit and PC drum unit in a place exposed to direct sunlight. If the PC drum is exposed to intense light, poor image quality could result.

•Do not unpack a toner unit or PC drum unit until the very time of use. Do not leave an unpacked unit standing. Install it immediately or poor image quality could result.

•Do not keep toner units and PC drum units in an upright position or upside down, as poor image quality could result.

•Do not throw or drop a toner unit or PC drum unit as poor image quality could result.

•Do not use this product in an area where ammonia or other gases or chemicals are present. Failure to do so may shorten the service life of the product, cause damage or decrease performance.

•Do not use this product in an environment with a temperature outside the range specified in the User manual, as a breakdown or malfunction could result.

•Do not attempt to feed stapled paper, carbon paper or aluminum foil through this product, as a malfunction or fire could result.

Do not touch or scratch the surface of the toner unit developing roller and the PC drum, as poor image quality could result.

Use the supplies and consumables recommended by the dealer. Use of any supply or consumable not recommended could result in poor image quality and breakdown.

USER INSTRUCTIONS

CE Marking (Declaration of Conformity)

This product complies with the following EU directives: 89/336/EEC, 73/23/EEC and 93/68/EEC directives.

This declaration is valid for the area of the European Union.

This device must be used with shielded interface cables. The use of non-shielded cable is likely to result in interference with radio communications and is prohibited under EU directives.

1-10	Di1611/Di2011

1.5 Safety Information	1

Laser Safety

This is a digital machine which operates using a laser. There is no possibility of danger from the laser provided the machine is operated according to the instructions in this manual.

Since radiation emitted by the laser is completely confined within protective housing, the laser beam cannot escape from the machine during any phase of user operation.

This machine is certified as a Class 1 laser product: This means the machine does not produce hazardous laser radiation.

Internal Laser Radiation

Maximum Average Radiation Power: 6.32 µW at the laser aperture of the print head unit.

Wavelength: 770-795 nm

This product employs a Class 3b laser diode that emits an invisible laser beam.

The laser diode and the scanning polygon mirror are incorporated in the print head unit.

The print head unit is NOT A FIELD SERVICE ITEM:

Therefore, the print head unit should not be opened under any circumstances.

Introduction Chapter 1

Laser Aperture of the

Print Head Unit

Print Head

Di1611/Di2011

1-11

Introduction Chapter 1

1	1.5 Safety Information

CDRH Regulation

This machine is certified as a Class 1 Laser product under Radiation Performance Standard according to the Food, Drug and Cosmetic Act of 1990. Compliance is mandatory for Laser products marketed in the United States and is reported to the Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration of the U.S. Department of Health and Human Services (DHHS). This means that the device does not produce hazardous laser radiation.

The label shown on page 1-14 indicates compliance with the CDRH regulations and must be attached to laser products marketed in the United States.

CAUTION

Use of controls, adjustments or performance of procedures other than those specified in this manual may result in hazardous radiation exposure.

This is a semiconductor laser. The maximum power of the laser diode is 5 mW and the wavelength is 770-795 nm.

For European Users

CAUTION

Use of controls, adjustments or performance of procedures other than those specified in this manual may result in hazardous radiation exposure.

This is a semiconductor laser. The maximum power of the laser diode is 5mW and the wavelength is 770-795 nm.

For Denmark Users

ADVARSEL

Usynlig laserstråling ved åbning, når sikkerhedsafbrydere er ude af funktion. Undgå udsættelse for stråling. Klasse 1 laser produkt der opfylder IEC60825 sikkerheds kravene.

Dansk: Dette er en halvlederlaser. Laserdiodens højeste styrke er 5mW og bølgelængden er 770-795 nm.

For Finland, Sweden Users

LOUKAN 1 LASERLAITE

KLASS 1 LASER APPARAT

VAROITUS!

Laitteen Käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle.

1-12	Di1611/Di2011

1.5 Safety Information	1

Tämä on puolijohdelaser. Laserdiodin sunrin teho on 5mW ja aallonpituus on 770795 nm.

VARNING!

Om apparaten används på annat sätt än i denna bruksanvisning specificerats, kan användaren utsättas för osynlig laserstrålning, som överskrider gränsen för laserklass 1.

Det här är en halvledarlaser. Den maximala effekten för laserdioden är 5mW och våglängden är 770-795 nm.

VARO!

Avattaessa ja suojalukitus ohitettaessa olet alttiina näkymättömälle lasersäteilylle. Älä katso säteeseen.

VARNING!

Osynlig laserstrålning när denna del är öppnad och spärren är urkopplad. Betrakta ej strålen.

For Norway Users

ADVERSEL

Dersom apparatet brukes på annen måte enn spesifisert i denne bruksanvisning, kan brukeren utsettes for unsynlig laserstråling som overskrider grensen for laser klass 1.

Dette en halvleder laser. Maksimal effekt till laserdiode er 5mW og bølgelengde er 770-795 nm.

Introduction Chapter 1

Di1611/Di2011

1-13

Introduction Chapter 1

1	1.5 Safety Information

Laser Safety Label

A laser safety label is attached to the outside of the machine as shown below.

Ozone Release

CAUTION

Locate the Machine in a Well Ventilated Room

A negligible amount of ozone is generated during normal operation of this machine. An unpleasant odor may, however, be created in poorly ventilated rooms during extensive machine operations. For a comfortable, healthy, and safe operating environment, it is recommended that the room well ventilated.

REMARQUE

= Placer l’appareil dans une pièce largement ventilée =

Une quantité d’ozone négligable est dégagée pendant le fonctionnement de l’appareil quand celui-ci est utilisé normalement. Cependant, une odeur désagréable peut être ressentie dans les pièces dont l’aération est insuffisante et lorsque une utilisation prolongée de l’appareil est effectuée. Pour avoir la certitude de travailler dans un environnement réunissant des conditions de confort, santé et de sécurité, il est préférable de bien aérer la pièce ou se trouve l’appareil.

1-14	Di1611/Di2011

1.5 Safety Information	1

Acoustic Noise

For European Users

Machine Noise Regulation 3 GSGV, 18.01.1991 : The sound pressure level at the operator position according to EN 27779 is equal to or less than 70dB(A).

Introduction Chapter 1

Di1611/Di2011

1-15

1	1.5 Safety Information

Introduction Chapter 1

1-16	Di1611/Di2011

Precautions 2

Precautions Chapter 2

Precautions Chapter 2

2	2.1 Installation Precautions

2.1Installation Precautions

Installation Site

To ensure utmost safety and prevent possible malfunctions, install the machine in a location that meets the following requirements.

-A location away from curtains, etc. that may catch fire and burn easily

-A location that is not exposed to water or other liquids

-A location free from direct sunlight

-A location out of the direct airflow of an air conditioner or heater, and not exposed to extremely high or low temperatures

-A well-ventilated location

-A location that is not exposed to high humidity

-A location that is not extremely dusty

-A location not subjected to undue vibrations

-A stable and level location

-A location where ammonia or other organic gases are not generated

-A location that does not put the operator in the direct airflow of exhaust from the machine

-A location that is not near any kind of heating devices

Power Source

The power source requirements are as follows.

Voltage fluctuation: Maximum ±10%

Frequency fluctuation: Maximum ±3 Hz

Use a power source with as little voltage or frequency fluctuations as possible.

2-2	Di1611/Di2011

2.1 Installation Precautions	2

Space Requirements

To ensure easy machine operation, supply replacement, and maintenance, adhere to the recommended space requirements detailed below.

			2
<Di1611>			Chapter
	1099		1024
*100	599	**400	Precautions
		995
		356
<Di2011>
	1099		1069
*100	599	**400
		356
		1100
		1352
		252
			Unit: mm

Note

Since there is a ventilation duct on the left side of the machine, be sure to allow a clearance of *100 mm or more on the left side.

Allow a clearance of **400 mm or more on the right side of the machine so that the side cover can be opened.

Di1611/Di2011

2-3

Precautions Chapter 2

2	2.2 Operation Precautions

2.2Operation Precautions

Operating Environment

The environmental requirements for correct operation of the machine are as follows.

Temperature: 10°C to 30°C with fluctuations of no more than 10°C within an hour

Humidity: 15% to 85% with fluctuations of no more than 10% within an hour

Proper Use

To ensure the optimum performance of the machine, follow the precautions listed below.

-Never place heavy objects on the original glass or subject it to shocks.

-Never open any machine doors or turn off the machine while it is making copies; otherwise, a paper jam will occur.

-Never bring any magnetized object or use flammable sprays or liquids near the machine.

Always make sure that the power plug is completely plugged into the electrical outlet.

-Always make sure that the machine’s power plug is visible and not hidden by the machine.

Always unplug the machine from the electrical outlet if the unit is not to be used for a long period of time.

Always provide good ventilation when making a large number of continuous copies.

2-4	Di1611/Di2011

2.2 Operation Precautions	2

CAUTION

If the ventilation duct on the left side of the machine is blocked, the inside of the machine will accumulate heat, resulting in a malfunction or fire.

Be sure to allow a clearance of 100 mm or more on the left side of the machine for the ventilation duct.

CAUTION

The area around the fusing unit is extremely hot.

Be careful not to touch any parts around the fusing unit, other than those indicated in this manual, in order to reduce the risk of burns. Be especially careful not to touch parts marked with warning labels, and their surrounding areas.

If you get burnt, immediately cool the skin under cold water, and then seek professional medical advice.

Transporting the Machine

If you need to transport the machine over a long distance, consult your technical representative.

Care of Machine Supplies

Use the following precautions when handling the machine supplies (toner cartridge, paper, etc.).

Store the supplies in a location that meets the following requirements. Free from direct sunlight

Away from any heating apparatus Not subjected to high humidity Not extremely dusty

Store in a sealed plastic bag in a cool, dark place paper that has been removed from its wrapper but not loaded into the machine.

-Only use toner that has been manufactured specifically for this machine. Never use other types of toner.

-Keep all supplies out of the reach of children.

Precautions Chapter 2

Di1611/Di2011

2-5