Konica Minolta bizhub C525, Bizhub C252 User Manual
User’s Guide [Copy Operations]
Introduction
Introduction
Thank you for choosing this machine.
This manual contains details on the operation of the various functions of the
machine, precautions on its use, and basic troubleshooting procedures. In
order to ensure that this machine is used correctly and efficiently, carefully
read this manual before using the machine. After reading the manual, store
it in the designated holder so that it can easily be referred to when questions
or problems arise during operation.
The illustrations used in this manual may appear slightly different from views
of the actual equipment.
Energy Star
As an ENERGY STAR® Partner, we have determined that this machine meets
the ENERGY STAR
What is an ENERGY STAR
An ENERGY STAR
ically switch to a “low-power mode” after a period of inactivity. An ENERGY
STAR
and helps protect the environment.
®
®
®
Guidelines for energy efficiency.
®
Product?
®
product has a special feature that allows it to automat-
product uses energy more efficiently, saves you money on utility bills
C252 x-1
Trademarks and registered trademarks
KONICA MINOLTA, KONICA MINOLTA Logo, and The essentials of imaging
are registered trademarks or trademarks of KONICA MINOLTA HOLDINGS,
INC.
PageScope and bizhub are registered trademarks or trademarks of KONICA
MINOLTA BUSINESS TECHNOLOGIES, INC.
Netscape Communications, the Netscape Communications logo, Netscape
Navigator, Netscape Communicator, and Netscape are trademarks of Netscape Communications Corporation.
This machine and PageScope Box Operator are based in part on the work of
the Independent JPEG Group.
Compact-VJE
Copyright 1986-2003 VACS Corp.
RC4® is a registered trademark or trademark of RSA Security Inc. in the United States and/or other countries.
Introduction
RSA® is a registered trademark or trademark of RSA Security Inc. RSA
®
BSAFE
is a registered trademark or trademark of RSA Security Inc. in the
United States and/or other countries.
License information
This product includes RSA BSAFE Cryptographic software
from RSA Security Inc.
OpenSSL Statement
OpenSSL License
Copyright © 1998-2000 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must
display the following acknowledgment:
“This product includes software developed by the OpenSSL Project for
use in the OpenSSL Toolkit. (http://www.openssl.org/)”
x-2 C252
Introduction
4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used
5. Products derived from this software may not be called “OpenSSL” nor
6. Redistributions of any form whatsoever must retain the following ac-
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS” AND
ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
to endorse or promote products derived from this software without prior
written permission. For written permission, please contact opensslcore@openssl.org.
may “OpenSSL” appear in their names without prior written permission
of the OpenSSL Project.
knowledgment:
“This product includes software developed by the OpenSSL Project for
use in the OpenSSL Toolkit (http://www.openssl.org/)”
This product includes cryptographic software written by Eric Young
(eay@crypt-Soft.com). This product includes software written by Tim Hudson (tjh@cryptsoft.com).
Original SSLeay License
Copyright © 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved.
This package is an SSL implementation written by Eric Young (eay@cryptsoft.com).
The implementation was written so as to conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code
found in this distribution, be it the RC4, RSA, Ihash, DES, etc., code; not just
the SSL code.
The SSL documentation included with this distribution is covered by the
same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com).
Copyright remains Eric Young’s, and as such any Copyright notices in the
code are not to be removed. If this package is used in a product, Eric Young
should be given attribution as the author of the parts of the library used. This
can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package.
C252 x-3
Introduction
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the copyright notice, this list
of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must
display the following acknowledgement:
“This product includes cryptographic software written by Eric Young
(eay@crypt-soft.com)”
The word ‘cryptographic’ can be left out if the rouines from the library being used are not cryptographic related.
4. If you include any Windows specific code (or a derivative thereof) from
the apps directory (application code) you must include an acknowledgement:
“This product includes software written by Tin Hudson (tjh@cryptsoft.com)”
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public
Licence.]
All other product names mentioned are trademarks or registered trademarks
of their respective companies
x-4 C252
Introduction
Contents
Introduction
Energy Star® ..................................................................................... x-1
What is an ENERGY STAR
Trademarks and registered trademarks ......................................... x-2
Contents ............................................................................................ x-5
Available features ........................................................................... x-18
Selecting the print color ................................................................x-18
Automatically selecting the paper .................................................x-18
Adjusting copies to the size of the paper .....................................x-18
Specifying separate horizontal and vertical zoom ratios ..............x-18
Scanning the document in separate batches ...............................x-18
Center binding ...............................................................................x-19
Sorting copies ...............................................................................x-19
Stapling copies .............................................................................x-19
Punching holes in copies ..............................................................x-19
Copying multiple document pages onto a single page ................x-20
Copying a document containing various page sizes ....................x-20
Adjusting copies according to the image quality of the original ...x-20
Inserting paper between copies of overhead projector
transparencies ...............................................................................x-20
Adding a cover page .....................................................................x-21
Inserting different paper into copies .............................................x-21
Inserting pages from a different document at specified
locations in a copy ........................................................................x-21
Printing double-sided copies with the specified page on the
front side .......................................................................................x-22
Copying with reversed colors .......................................................x-22
Printing a mirror image ..................................................................x-22
Copying with a background color .................................................x-23
Improving the copy color quality ...................................................x-23
Separately copying a page spread ...............................................x-23
Creating booklets from copies of pamphlets ................................x-23
Repeating copy images ................................................................x-24
Printing the enlarged image on multiple pages ............................x-24
Making copies for filing .................................................................x-24
Copying with the page layout of a magazine ................................x-25
Erasing sections of copies ............................................................x-25
Adjusting the image to fit the paper size ......................................x-25
Printing distribution numbers or copy protection text on
copies ............................................................................................x-26
Managing jobs ...............................................................................x-26
Programming copy settings ..........................................................x-26
®
Product? ............................................x-1
C252 x-5
Introduction
Checking the copy settings ..........................................................x-26
Enlarging the size of text in touch panel screens .........................x-26
Displaying explanations of functions and settings .......................x-26
Interrupting a copy job ..................................................................x-27
Printing a sample copy .................................................................x-27
Adjust color parameters .................................................................x-28
General information about color ....................................................x-30
Relationship between hue, brightness and saturation
(color model) ....................................................................................x-31
“Red” parameter ..............................................................................x-32
“Green” parameter ..........................................................................x-33
“Blue” parameter .............................................................................x-34
“Color Balance” parameter (CMYK color adjustment) ................x-35
“Brightness” parameter ..................................................................x-37
“Contrast” parameter ......................................................................x-38
“Saturation” parameter ...................................................................x-39
“Sharpness” parameter ..................................................................x-40
“Hue” parameter ..............................................................................x-41
“Copy Density” parameter ..............................................................x-42
“Single Color” function ...................................................................x-43
“2 Color” function ............................................................................x-44
“Background Color” function .........................................................x-45
“Neg-/Pos. Reverse” function ........................................................x-46
Monotone copy .............................................................................x-46
Full-color copy and “Background Color” function ........................x-46
“Mirror Image” function ..................................................................x-47
Explanation of manual conventions ...............................................x-48
Descriptions and symbols for documents and paper ..................x-50
“Width” and “Length” ...................................................................x-50
Paper Orientation ..........................................................................x-50
User’s Guides ...................................................................................x-52
User’s Guide [Copy Operations] <this manual> ...........................x-52
User’s Guide [Network Scanner Operations] ................................x-52
User’s Guide [Box Operations] .....................................................x-52
User’s Guide [Enlarge Display Operations] ...................................x-52
User’s Guide [FK-502 Facsimile Operations] ................................x-52
User’s Guide [Network Facsimile Operations] ..............................x-52
User’s Guide [Print Operations] ....................................................x-53
x-6 C252
Introduction
Quick Guide [Print Operations] .....................................................x-53
Legal restrictions on copying ........................................................ x-54
1 Installation and operation precautions
1.1 Safety information ............................................................................ 1-2
Warning and precaution symbols .................................................. 1-2
Meaning of symbols ....................................................................... 1-2
1.2 Regulation notices ............................................................................ 1-9
CE Marking (Declaration of Conformity) for users of the
European Union (EU) ...................................................................... 1-9
USER INSTRUCTIONS FCC PART 15 - RADIO FREQUENCY
DEVICES (for U.S.A. users) ............................................................ 1-9
INTERFERENCE-CAUSING EQUIPMENT STANDARD
(ICES-003 ISSUE 4) (for Canada users) ......................................... 1-9
For users in countries not subject to class B regulations ............ 1-10
Laser safety .................................................................................. 1-10
Internal laser radiation .................................................................. 1-10
CDRH regulations ........................................................................ 1-11
For European users ...................................................................... 1-12
For Denmark users ....................................................................... 1-12
For Finland, Sweden users .......................................................... 1-12
For Norway users ......................................................................... 1-13
Laser safety label ......................................................................... 1-14
Ozone release .............................................................................. 1-14
Acoustic noise (for European users only) ..................................... 1-15
For EU member states only ......................................................... 1-15
For EU member states only ......................................................... 1-15
1.3 Caution notations and labels ......................................................... 1-16
1.4 Space requirements ....................................................................... 1-17
1.5 Operation precautions ................................................................... 1-18
Power source ............................................................................... 1-18
Operating environment ................................................................ 1-18
Storage of copies ......................................................................... 1-18
2 Before making copies
2.1 Part names and their functions ....................................................... 2-2
Options ........................................................................................... 2-2
Outside of machine ........................................................................ 2-5
Inside of machine ......................................................................... 2-11
Saddle stitcher SD-503/mailbin kit MT-501 ................................. 2-13
Finisher FS-514/output tray OT-601/punch kit PK-510 ............... 2-14
Finisher FS-603/punch kit PK-501 ............................................... 2-16
C252 x-7
Introduction
Finisher FS-501/job separator JS-601 ..........................................2-18
Control panel ................................................................................2-21
Basic settings screen (Basic screen) ............................................2-24
Icons that appear in the screen ....................................................2-26
2.2 Adjusting the angle of the control panel .......................................2-27
To adjust the angle of the control panel .......................................2-27
2.3 Turning on the Main Power and the Auxiliary Power ...................2-29
To turn on the machine .................................................................2-29
To scan during warm-up ...............................................................2-31
To turn off the machine .................................................................2-33
Automatically canceling the settings (automatic panel reset) .......2-34
Automatically canceling the mode screen
(automatic system reset) ...............................................................2-34
Automatically conserving energy (Low Power mode) ...................2-35
Automatically conserving energy (Sleep mode) ............................2-36
Manually conserving energy .........................................................2-37
Automatically turning the machine on/off (weekly timer) ..............2-38
Controlling each user’s use of this machine
(user authentication) .....................................................................2-40
Controlling each account’s use of this machine
(account track) ..............................................................................2-43
2.4 Loading paper into the 1st tray ......................................................2-47
To load paper (1st tray) .................................................................2-47
2.5 Loading paper into the 2nd, 3rd or 4th tray ..................................2-53
To load paper (2nd, 3rd or 4th tray) ..............................................2-53
2.6 Loading paper into the LCT ............................................................2-55
To load paper (LCT) ......................................................................2-55
2.7 Loading paper into the bypass tray ...............................................2-58
To load paper (bypass tray) ..........................................................2-58
3 Basic copy operations
3.1 General copy operation ....................................................................3-2
To make a copy ..............................................................................3-2
3.2 Operations that cannot be combined ..............................................3-5
Operations where the setting specified last is given priority ..........3-5
Operations where the setting specified first is given priority ..........3-6
3.3 Feeding the document ......................................................................3-7
To load the document into the ADF ................................................3-7
To place the document on the original glass ..................................3-9
Scanning the document in separate batches
(“Separate Scan” setting) ..............................................................3-11
x-8 C252
Introduction
3.4 Specifying original settings ........................................................... 3-20
3.5 Selecting a color setting ................................................................ 3-32
3.6 Selecting a paper setting ............................................................... 3-35
Scanning a multi-page document from the original glass ........... 3-15
Copying documents of mixed sizes (“Mixed Original” setting) .... 3-20
Copying thick documents (“Thick Original” setting) .................... 3-22
Selecting the document orientation
(Original Direction settings) .......................................................... 3-24
To specify an original direction setting ........................................ 3-25
Selecting the position of the binding margin (Margin settings) .... 3-26
To specify a margin setting .......................................................... 3-27
To change scan settings for each document ............................... 3-29
To select a color setting ............................................................... 3-33
Automatically selecting the paper size
(“Auto Paper Select” setting) ....................................................... 3-35
Manually selecting the desired paper size ................................... 3-37
3.7 Specifying a zoom setting ............................................................. 3-38
Automatically selecting the zoom ratio (“Auto Zoom” setting) .... 3-38
Specifying the same zoom ratio as the document
(“×1.0” setting) ............................................................................. 3-39
Slightly reducing the copy (“Minimal” setting) ............................. 3-40
Selecting a preset zoom ratio (enlarge and reduce settings) ....... 3-41
Typing In the zoom ratio (XY Zoom setting) ................................. 3-42
Typing In separate X and Y zoom ratios
(independent zoom settings) ........................................................ 3-44
Selecting a stored zoom ratio ...................................................... 3-46
Storing the desired zoom ratio ..................................................... 3-47
3.8 Selecting the document and copy type settings
(Simplex/Duplex settings) .............................................................. 3-49
To select single-sided copies ...................................................... 3-51
To select double-sided copies ..................................................... 3-53
3.9 Selecting the quality of the document .......................................... 3-55
Loading documents with small print or photos
(Original Type settings) ................................................................ 3-55
To specify an original type setting ............................................... 3-56
3.10 Specifying the density settings ..................................................... 3-59
Adjusting the print density (Density settings) ............................... 3-60
Adjusting the background density
(Background Removal settings) ................................................... 3-61
Adjusting the reproduction quality of text .................................... 3-63
C252 x-9
Introduction
3.11 Selecting a combine originals setting ...........................................3-64
Copying multiple document pages onto a single page
(Combine Originals) ......................................................................3-66
3.12 Selecting finishing settings ............................................................3-67
Separating copies by sets (“Sort” setting) ....................................3-70
Separating copies by pages (“Group” setting) .............................3-71
Stapling copies (Staple settings) ..................................................3-72
To bind copies with staples ..........................................................3-75
Punching holes in copies (Punch settings) ...................................3-77
To punch holes in copies ..............................................................3-78
3.13 Specifying center binding ...............................................................3-80
To bind copies at the center (“Fold & Staple”):
Finisher FS-514 .............................................................................3-82
To bind copies at the center (“Fold & Staple”):
Finisher FS-603 .............................................................................3-83
3.14 Scanning the next document to be copied while a copy job
is being printed (next job reservation) ...........................................3-84
To reserve a copy job ...................................................................3-84
3.15 Stopping scanning/printing ............................................................3-86
To stop scanning/printing .............................................................3-86
3.16 Deleting a stopped job ....................................................................3-87
To delete a stopped job ................................................................3-87
4 Additional copy operations
4.1 Checking the copy settings (Mode Check) .....................................4-2
To check the settings ......................................................................4-2
To change the settings ...................................................................4-4
4.2 Printing a proof copy to be checked (Proof Copy) .........................4-5
To make test prints .........................................................................4-5
4.3 Interrupting a copy job (Interrupt mode) .........................................4-8
To interrupt a copy job ....................................................................4-8
4.4 Registering copy programs (Mode Memory) ................................4-10
To store a copy program ..............................................................4-10
To delete a copy program .............................................................4-13
4.5 Copying with programmed copy settings (Mode Memory) .........4-14
To recall a stored job ....................................................................4-14
4.6 Displaying function descriptions (Help) ........................................4-17
Overview of Help Screens ............................................................4-17
To display the Main Help Menu screen ........................................4-20
To display the Help screen while specifying a setting ..................4-22
x-10 C252
Introduction
4.7 Specifying control panel settings (Accessibility mode) .............. 4-23
Displaying the Accessibility Setting Screen ................................. 4-23
To set the “Key Repeat Start/Interval Time” function .................. 4-23
To set the “Enlarge Display Timer Setting” function .................... 4-26
To set the “Message Display Time” function ............................... 4-28
To set the “Sound Setting” function ............................................ 4-30
To set the “Touch Panel Adj.” function ........................................ 4-33
To set the “Auto Reset Notification” function .............................. 4-35
To set the “Enlarge Display Confirmation Screen” function ........ 4-38
5 Troubleshooting
5.1 When the message “malfunction detected.” appears
(call technical representative) ......................................................... 5-2
To call the technical representative ............................................... 5-3
5.2 When the message “Misfeed detected.” appears ......................... 5-5
Location of Paper misfeed ............................................................. 5-5
Paper misfeed indications .............................................................. 5-7
To clear a paper misfeed in the bypass tray .................................. 5-9
To clear a paper misfeed in the automatic duplex unit ................ 5-10
To clear a paper misfeed in the 1st tray ...................................... 5-11
To clear a paper misfeed in the 2nd tray ..................................... 5-12
To clear a paper misfeed in a paper tray (3rd or 4th tray) ............ 5-13
To clear a paper misfeed in the LCT ............................................ 5-14
To clear a paper misfeed in the right-side door ........................... 5-16
To clear a paper misfeed in the fusing unit .................................. 5-19
To clear a banner paper misfeed ................................................. 5-23
To clear a paper misfeed in the ADF ............................................ 5-28
To clear a paper misfeed in the finisher FS-514 .......................... 5-32
To clear a paper misfeed in the mailbin ....................................... 5-36
To clear a paper misfeed in the saddle stitcher ........................... 5-38
To clear a paper misfeed in finisher FS-501 ................................ 5-40
To clear a paper misfeed in finisher FS-603 ................................ 5-45
5.3 When the message “Replenish paper.” appears ......................... 5-49
To replenish paper ....................................................................... 5-49
5.4 When the message “... Not enough remaining memory.”
appears ............................................................................................ 5-50
Memory becomes full while scanning .......................................... 5-50
Memory becomes full while queuing a job .................................. 5-51
5.5 When “Please replace following unit(s).” appears ...................... 5-52
5.6 When the message “Need to replace XXXX.” appears ............... 5-53
5.7 Simple troubleshooting .................................................................. 5-55
Main unit ...................................................................................... 5-55
ADF .............................................................................................. 5-57
C252 x-11
Finisher .........................................................................................5-58
5.8 Main messages and their remedies ...............................................5-59
6 Specifications
6.1 Specifications ....................................................................................6-2
bizhub C252 ....................................................................................6-2
Option specifications ......................................................................6-5
Automatic duplex unit AD-503 ........................................................6-5
Automatic document feeder DF-601 ..............................................6-5
Paper feed cabinet PC-103 ............................................................6-7
Paper feed cabinet PC-203 ............................................................6-7
Paper feed cabinet PC-403 ............................................................6-7
Finisher FS-514 ...............................................................................6-8
Punch kit PK-510 ............................................................................6-9
Saddle stitcher SD-503 ...................................................................6-9
Output tray OT-601 .........................................................................6-9
Mailbin kit MT-501 ........................................................................6-10
Finisher FS-603 .............................................................................6-11
Punch kit PK-501 ..........................................................................6-12
Finisher FS-501 .............................................................................6-12
Job separator JS-601 ...................................................................6-13
Introduction
7 Copy paper/original documents
7.1 Copy paper .........................................................................................7-2
Possible paper sizes .......................................................................7-2
Paper types and paper capacities ..................................................7-4
Special paper ..................................................................................7-5
Precautions for paper .....................................................................7-7
Paper storage .................................................................................7-7
Auto tray switch feature ..................................................................7-8
Order for Selecting the Paper trays ................................................7-8
7.2 Selecting the paper settings .............................................................7-9
To automatically detect the paper size
(“Auto Paper Select” setting) ..........................................................7-9
To specify a paper size (set size settings) ....................................7-11
To specify a non-standard paper size (Custom Size settings) .....7-13
To store a non-standard paper size (Custom Size settings) .........7-15
To specify a setting for oversized paper
(Oversized Paper settings) ............................................................7-18
To specify a setting for special paper ...........................................7-21
To print double-sided copies manually ........................................7-23
7.3 Original documents .........................................................................7-25
Documents that can be loaded into the ADF ...............................7-25
x-12 C252
Introduction
Precautions for loading documents into the ADF ........................ 7-27
Documents that can be placed on the original glass ................... 7-28
Precautions for positioning documents on the original glass ...... 7-28
8 Application functions
8.1 Inserting paper between overhead projector transparencies
(“OHP Interleave” function) ............................................................. 8-2
To copy using the “OHP Interleave” function ................................ 8-3
8.2 Adding cover pages (“Cover Mode” function) ............................... 8-5
To copy using the “Cover Mode” function ..................................... 8-6
8.3 Inserting different paper into copies (“Insert Sheet” function) .... 8-8
To copy using the “Insert Sheet” function ..................................... 8-9
8.4 Inserting copies of a different document for a specified page
(“Insert Image” function) ................................................................ 8-12
To copy using the “Insert Image” function .................................. 8-12
8.5 Specifying pages to be printed on the front side
(“Chapters” function) ...................................................................... 8-16
To copy using the “Chapters” function ........................................ 8-17
8.6 Scanning documents with different settings and printing
copies all together (“Program Job” function) .............................. 8-19
To copy using the “Program Job” function ................................. 8-20
8.7 Producing separate copies of each page in a page spread
(“Book Copy” function) .................................................................. 8-24
To copy using the “Book Copy” function .................................... 8-25
8.8 Copying pamphlets (“Booklet Original” function) ....................... 8-29
To copy using the “Booklet Original” function ............................. 8-30
8.9 Tiling copy images (“Image Repeat” function) ............................ 8-33
To copy using the “Image Repeat” function ................................ 8-34
8.10 Copying an enlarged image on multiple pages
(“Poster Mode” function) ............................................................... 8-38
To copy using the “Poster Mode” function .................................. 8-38
8.11 Copying with the page layout of a magazine
(“Booklet” function) ........................................................................ 8-43
To copy using the “Booklet” function .......................................... 8-44
8.12 Copying with image colors inversed
(“Neg-/Pos. Reverse” function) ..................................................... 8-45
To copy using the “Neg-/Pos. Reverse” function ........................ 8-46
8.13 Copying in a mirror image (“Mirror Image” function) .................. 8-47
To copy using the “Mirror Image” function .................................. 8-47
C252 x-13
Introduction
8.14 Adding a background color to copies
(“Background Color” function) .......................................................8-51
To copy using the “Background Color” function ..........................8-51
8.15 Adjusting the copy color quality (Adjust Color parameters) .......8-53
To adjust the Adjust Color parameters .........................................8-54
Checking the Print Result of the Adjust Color Settings
(Sample Copy) ..............................................................................8-56
To make sample copies ................................................................8-57
8.16 Adding filing margins to copies (“Page Margin” function) ..........8-58
To copy using the “Page Margin” function ...................................8-59
8.17 Erasing specified areas of copies (“Erase” function) ..................8-61
To copy using the “Erase” function ..............................................8-61
8.18 Adjusting the image to fit the paper
(Image Adjustment settings) ..........................................................8-63
To copy using the Image Adjustment settings .............................8-64
8.19 Printing the Date/Time, page number or distribution number
on copies (Stamp functions) ...........................................................8-67
Printing the Date/Time (“Date/Time” function) ..............................8-68
To copy using the “Date/Time” function .......................................8-68
Printing the page number (“Page #” function) ..............................8-71
To copy using the “Page #” function ............................................8-71
Printing the distribution number (“Set Numbering” function) .......8-75
To copy using the “Set Numbering” function ...............................8-75
Printing copy protection text (“Copy Protect” function) ...............8-77
To copy using the “Copy Protect” function ..................................8-77
9 Replacing toner cartridges and staples and emptying
waste containers
9.1 Replacing the toner cartridge ..........................................................9-2
To replace the toner cartridge ........................................................9-6
9.2 Replacing the staples ......................................................................9-10
To replace the staple cartridge in the finisher FS-514 ..................9-11
To replace the staple cartridge in saddle stitcher .........................9-13
To replace the staple cartridge for finisher FS-501 ......................9-16
To replace the staple cartridge for finisher FS-603 ......................9-19
9.3 Clearing a staple jam ......................................................................9-24
To clear jammed staples in the finisher FS-514 ...........................9-26
To clear jammed staples in the saddle stitcher ............................9-31
To clear jammed staples in finisher FS-501 .................................9-35
To clear jammed staples in finisher FS-603 .................................9-37
x-14 C252
Introduction
9.4 Emptying the waste containers ..................................................... 9-43
To empty the hole-punch waste container for finisher FS-514 .... 9-45
To empty the hole-punch waste container for finisher FS-603 .... 9-46
9.5 Replacing the waste toner box ..................................................... 9-48
To replace the waste toner box ................................................... 9-50
10 Care of the machine
10.1 Cleaning ........................................................................................... 10-2
Housing ........................................................................................ 10-2
Original glass ................................................................................ 10-3
Control panel ................................................................................ 10-3
Document transfer belt ................................................................ 10-4
Original cover pad ........................................................................ 10-5
Paper Take-Up roller .................................................................... 10-5
Electrostatic charger wire ............................................................ 10-6
Print head ..................................................................................... 10-7
10.2 Viewing counters (Meter Count) .................................................... 10-8
Viewing counters .......................................................................... 10-8
To view the counters .................................................................... 10-8
Viewing the coverage rate ............................................................ 10-9
To view the coverage rate ............................................................ 10-9
10.3 When the message “Preventive maintenance time.”
appears .......................................................................................... 10-10
11 Managing jobs (Job List)
11.1 Overview of the Job List screen .................................................... 11-2
Jobs ............................................................................................. 11-2
Multi-Job feature .......................................................................... 11-2
Job list screens ............................................................................ 11-3
11.2 Performing operations on jobs ...................................................... 11-6
To delete a job ............................................................................. 11-6
To check the job settings ............................................................. 11-8
Displayed information .................................................................. 11-9
To check the job details ............................................................. 11-10
To display current jobs (held jobs and active jobs lists) ............ 11-11
To display Job History ............................................................... 11-12
To print a sample copy of a stored job ...................................... 11-13
To print a stored job ................................................................... 11-15
To increase priority for printing .................................................. 11-17
C252 x-15
12 Utility
12.1 Overview of utility mode parameters .............................................12-2
12.2 Selecting a destination register ...................................................12-14
12.3 Specifying user settings ...............................................................12-17
Introduction
List of registration information and parameters ............................12-2
Scan ............................................................................................12-14
Fax ..............................................................................................12-14
User box .....................................................................................12-14
Displaying the destination register screen ..................................12-15
System setting ............................................................................12-17
Display setting ............................................................................12-19
Initial setting ................................................................................12-21
Copier setting .............................................................................12-22
Scanner setting ...........................................................................12-24
Printer setting ..............................................................................12-24
Displaying the Utility Setting screen ...........................................12-25
12.4 Specifying administrator settings ................................................12-27
System setting ............................................................................12-27
Administrator/machine setting ....................................................12-37
One-Touch registration ...............................................................12-37
User authentication/account track .............................................12-38
Network setting ...........................................................................12-40
Copier setting .............................................................................12-40
Printer setting ..............................................................................12-41
Fax setting ..................................................................................12-41
System connection .....................................................................12-42
Security setting ...........................................................................12-43
Displaying the Administrator Setting screen ...............................12-47
12.5 Overview of weekly timer settings ...............................................12-49
Requisite .....................................................................................12-49
12.6 Adjusting the printer .....................................................................12-50
Adjusting the starting print position at the leading edge
position .......................................................................................12-50
Adjusting the starting print position at the left edge ...................12-52
Adjusting the starting print position for the second side ............12-54
Adjusting printing according to the media ..................................12-56
12.7 Adjusting the finisher (FS-514) .....................................................12-58
Adjusting the center folding position ..........................................12-58
Adjusting the center stapling position ........................................12-60
Adjusting the horizontal punch position .....................................12-62
Adjusting the angle of punched holes ........................................12-64
x-16 C252
Introduction
12.8 Adjusting the finisher (FS-603) .................................................... 12-66
12.9 Adjusting the color registration .................................................. 12-72
12.10 Adjusting the gradation levels ..................................................... 12-75
12.11 Authentication method ................................................................. 12-78
12.12 User authentication setting ......................................................... 12-86
Adjusting the center stapling position ........................................ 12-66
Adjusting the center folding position ......................................... 12-69
Adjusting the color registration for yellow, magenta and
cyan ............................................................................................ 12-72
Requisite .................................................................................... 12-75
User authentication and account track ...................................... 12-78
When user authentication and account track are
synchronized .............................................................................. 12-79
When user authentication and account track are used
separately ................................................................................... 12-80
To select an authentication method ........................................... 12-81
Administrative setting—user name list ....................................... 12-86
Default function permission ....................................................... 12-87
To specify the default function permissions .............................. 12-87
Authenticating public users ........................................................ 12-88
User registration ......................................................................... 12-90
User counter .............................................................................. 12-95
To check the counter ................................................................. 12-96
12.13 Account track setting ................................................................... 12-98
Account track registration .......................................................... 12-98
Account track counter .............................................................. 12-102
To check the counter ............................................................... 12-103
12.14 Password rules ........................................................................... 12-105
Conditions of the password rules ............................................ 12-105
12.15 Enhanced security settings ....................................................... 12-107
12.16 Viewing the status of the consumables .................................... 12-110
Displaying the unit life indicator screen ................................... 12-110
13 Appendix
13.1 Entering text .................................................................................... 13-2
To type text .................................................................................. 13-4
List of available characters .......................................................... 13-4
13.2 Glossary ........................................................................................... 13-5
13.3 Index .............................................................................................. 13-10
C252 x-17
Available features
Selecting the print color
The color used to print copies can be specified, for example, the copy can
be printed in full color or in black and white.
For details, refer to “Selecting a color setting” on page 3-32.
Automatically selecting the paper
The most appropriate paper size can automatically be selected based on the
size of the loaded document and the specified zoom ratio.
For details, refer to “Automatically selecting the paper size (“Auto Paper Select” setting)” on page 3-35.
Adjusting copies to the size of the paper
The most appropriate zoom ratio can automatically be selected based on the
size of the loaded document and the specified paper size.
Introduction
For details, refer to “Automatically selecting the zoom ratio (“Auto Zoom”
setting)” on page 3-38.
Specifying separate horizontal and vertical zoom ratios
By specifying separate horizontal and vertical zoom ratios, copies of the document can be resized as desired.
For details, refer to “Typing In separate X and Y zoom ratios (independent
zoom settings)” on page 3-44.
ABC
Scanning the document in separate batches
A document with a large number of pages can be divided and scanned in
separate batches. Double-sided copies can be produced by using the original glass or the document pages can be alternately loaded onto the original
glass or into the ADF, and then all pages can be copied together as a single
job.
For details, refer to “Scanning the document in separate batches (“Separate
Scan” setting)” on page 3-11 and “Scanning a multi-page document from
the original glass” on page 3-15.
ABC
ABC
x-18 C252
Introduction
Center binding
Copies can be folded at their center and bound with staples.
For details, refer to “To bind copies at the center (“Fold & Staple”): Finisher
FS-603” on page 3-83.
Sorting copies
The finishing method for copies can be selected.
For details, refer to “Separating copies by sets (“Sort” setting)” on
page 3-70, “Separating copies by pages (“Group” setting)” on page 3-71.
ABC
Stapling copies
Multi-page documents can be copied and stapled together.
For details, refer to “Stapling copies (Staple settings)” on page 3-72.
ABC
ABC
ABC ABC
Punching holes in copies
Holes for filing can be punched in the copies.
For details, refer to “Punching holes in copies (Punch settings)” on
page 3-77.
C252 x-19
ABC
Introduction
DEF
ABC
Copying multiple document pages onto a single page
Multiple pages of the document can be printed together on a single page.
For details, refer to “Copying multiple document pages onto a single page
(Combine Originals)” on page 3-66.
ABC DEF
Copying a document containing various page sizes
A document with various page sizes can be scanned and copied together.
For details, refer to “Copying documents of mixed sizes (“Mixed Original”
setting)” on page 3-20.
ABC DEF
ABCABC
Adjusting copies according to the image quality of the original
The copies can be adjusted according to the image quality of the document.
For details, refer to “Loading documents with small print or photos (Original
Type settings)” on page 3-55 or “Adjusting the print density (Density settings)” on page 3-60.
Inserting paper between copies of overhead projector transparencies
In order to prevent overhead projector transparencies from becoming stuck
to each other, a page (interleaf) can be inserted between the transparency
copies.
For details, refer to “Inserting paper between overhead projector transparencies (“OHP Interleave” function)” on page 8-2.
ABC
x-20 C252
DEF
DEF
ABC
Introduction
COVER
Adding a cover page
Cover pages can be added to copies, or copies can be made using different
paper (for example, colored paper) for only the cover pages.
For details, refer to “Adding cover pages (“Cover Mode” function)” on
page 8-5.
ABC
Inserting different paper into copies
Different paper (such as colored paper) can be inserted for specified pages
in the copies.
For details, refer to “Inserting different paper into copies (“Insert Sheet” function)” on page 8-8.
ABC
ABC ABC
Inserting pages from a different document at specified locations in a
copy
A document scanned later can be inserted for specified pages in a document
scanned earlier for copying.
For details, refer to “Inserting copies of a different document for a specified
page (“Insert Image” function)” on page 8-12.
C252 x-21
DEFABC
ABC
DEF
Introduction
2
1
2
1
Printing double-sided copies with the specified page on the front side
Double-sided copies can be printed with the specified pages on the front
side.
For details, refer to “Specifying pages to be printed on the front side (“Chapters” function)” on page 8-16.
3
4
5
2
4
2
3
1
3
3
4
2
5
4
5
1
1
2
1
1
2
1
Copying with reversed colors
A document can be copied with the light- and dark-colored areas of the document image inversed. With Color setting “Full Color”, copies are printed
with the hues and brightness inversed. With Color setting “Black” or “Single
Color”, copies are printed with the hues inversed.
For details, refer to “Copying with image colors inversed (“Neg-/Pos. Reverse” function)” on page 8-45.
ABCABC
Printing a mirror image
A document can be copied in its mirror image.
For details, refer to “Copying in a mirror image (“Mirror Image” function)” on
page 8-47.
x-22 C252
Introduction
Copying with a background color
A document can be copied using one of the 18 colors available as the color
of the background (blank areas).
For details, refer to “Adding a background color to copies (“Background
Color” function)” on page 8-51.
Improving the copy color quality
You can adjust color copies to the quality for the desired image.
For details, refer to “Adjusting the copy color quality (Adjust Color parameters)” on page 8-53.
Separately copying a page spread
A page spread, such as in an open book or catalog, can be copied onto separate pages.
For details, refer to “Producing separate copies of each page in a page
spread (“Book Copy” function)” on page 8-24.
ABC DEF
Creating booklets from copies of pamphlets
Pamphlets with their staples removed can be copied and bound with staples.
For details, refer to “Copying pamphlets (“Booklet Original” function)” on
page 8-29.
8
6
7
5
2
3
1
4
4
7
5
6
2
1
4
3
C252 x-23
Introduction
Repeating copy images
A document image can be repeatedly printed on a single sheet of paper.
For details, refer to “Tiling copy images (“Image Repeat” function)” on
page 8-33.
Printing the enlarged image on multiple pages
A single document page can be automatically split into parts with each part
printed enlarged.
For details, refer to “Copying an enlarged image on multiple pages (“Poster
Mode” function)” on page 8-38.
A
Making copies for filing
Copies can be printed with a filing margin so they can easily be stored in filing
binders.
For details, refer to “Adding filing margins to copies (“Page Margin” function)” on page 8-58.
DEF
ABC
GHI
ABC
DEF
GHI
x-24 C252
Introduction
Copying with the page layout of a magazine
Copies can be made with the pages arranged in a layout for center binding,
such as for a magazine.
For details, refer to “Copying with the page layout of a magazine (“Booklet”
function)” on page 8-43.
12
2
1
Erasing sections of copies
Areas, such as the shadows of punched holes and transmission information
in received faxes, can be erased in copies.
For details, refer to “Erasing specified areas of copies (“Erase” function)” on
page 8-61.
11
11
12 1
2
ABCABC
Adjusting the image to fit the paper size
When the copy paper is larger than the original document, copies can be
printed so that the document image fills the paper.
For details, refer to “Adjusting the image to fit the paper (Image Adjustment
settings)” on page 8-63.
C252 x-25
ABC
ABCABC
Introduction
Printing distribution numbers or copy protection text on copies
Pages numbers or copy protection text (hidden text that prevents improper
copying) can be printed on copies, or each copy set can be printed with distribution numbers.
For details, refer to “Printing the Date/Time, page number or distribution
number on copies (Stamp functions)” on page 8-67.
GHI
DEF
ABC
Managing jobs
The print status of copy jobs can be checked and the jobs can be managed.
For details, refer to “Managing jobs (Job List)” on page 11-2.
Programming copy settings
Frequently used copy settings can be programmed and recalled to be used
with other copy jobs.
For details, refer to “Registering copy programs (Mode Memory)” on
page 4-10.
Checking the copy settings
Screens showing the current copy settings can be displayed. From these
screens, the copy settings can also be changed.
ABC
GHI
DEF
DEF
ABC
GHI
For details, refer to “Checking the copy settings (Mode Check)” on page 4-2.
Enlarging the size of text in touch panel screens
The text and buttons in the touch panel can be displayed in a larger size that
is easier to read, allowing basic operations to be easily performed.
For details, refer to the Enlarge Display Operations of the User’s Guide.
Displaying explanations of functions and settings
The name and function of parts and details of functions and settings appears
in the Help screens.
For details, refer to “Displaying function descriptions (Help)” on page 4-17.
x-26 C252
Introduction
Interrupting a copy job
The copy job being printed can be interrupted in order for a different copy
job to be printed.
For details, refer to “Interrupting a copy job (Interrupt mode)” on page 4-8.
Printing a sample copy
Before printing a large number of copies, a single sample copy can be printed so that it can be checked.
For details, refer to “Printing a proof copy to be checked (Proof Copy)” on
page 4-5.
C252 x-27
Adjust color parameters
This section provides copy samples that are a helpful reference for setting
the wide variety of parameters, functions and settings available with this fullcolor copier.
Section Description Section Description
Introduction
General Information
About Color
“Red” Parameter Provides informa-
“Green” Parameter Provides informa-
“Blue” Parameter Provides informa-
Provides information on hue, brightness and saturation
(p. x-30)
tion on the adjustment of the red
hues (p. x-32)
tion on the adjustment of the green
hues (p. x-33)
tion on the adjustment of the blue
hues (p. x-34)
“Contrast” Parameter Provides informa-
tion on the adjustment of the contrast
level (p. x-38)
“Saturation” Parameter Provides informa-
tion on the adjustment of the
vividness (p. x-39)
“Sharpness” Parameter Provides informa-
tion on the adjustment of the
sharpness of text
(p. x-40)
“Hue” Parameter Provides informa-
tion on the adjustment of the hue
(p. x-41)
“Color Balance” Parameter
“Brightness” Parameter Provides informa-
x-28 C252
Provides information on the adjustment of the density
of the colors CMYK
(p. x-35)
tion on the adjustment of the
brightness (p. x-37)
“Copy Density” Parameter
“Single Color” Function Provides informa-
Provides information on the adjustment of the copy
density (p. x-42)
tion on copying with
a single selected
color (monotone)
(p. x-43)
Introduction
Section Description Section Description
“2 Color” Function Provides informa-
tion on copying using only black and
one selected color
(p. x-44)
“Background Color”
Function
* Since the print samples provided are photographs, they may slightly differ in color with actual
color copies.
Provides information on copying with
the selected background color
(p. x-45)
“Neg-/Pos. Reverse”
Function
“Mirror Image” Function Provides informa-
Provides information on copying a
document with the
light- and darkcolored areas of the
image inversed
(p. x-46)
tion on producing a
copy in the mirror
image of the original document
(p. x-47)
C252 x-29
Loading...