Konica Minolta bizhub C658, bizhub C558, bizhub C458 Installation Manual
Konica Minolta bizhub C658/C558/C458
Specication & Installation Guide
07/13/2016
bizhub C658/C558/C458 Specications
Typ e Full Color Printer/Copier/Scanner
Document holder Stationar y (mirror scanning)
Photoconductor OPC
Luminous source LED light-source illumination
Copying system Laser elec trostatic copy method
Developing system Dry-2 component developing method
Fusing sys tem Belt Fusing
Resolution Scanning: 600 x 600 dpi
Printing: 1200 x 1200 dpi
Document holder Types: sheets, books (2-page spreads),
three-dimensional objects
Size: Maximum 11" x 17"
Weight: 4 .5 lb.
Paper Thin Paper (14 lb. to 15.5 lb.)*
Plain Paper (16 lb. to 24 lb.)
Thick Paper 1 (24.25 lb. to 32 lb.)
Thick Paper 1+ (32.25 lb. to 41.75 lb.)
Thick Paper 2 (42 lb. to 55.5 lb.)
Thick Paper 3 (55.75 lb. to 68 lb.)
Thick Paper 4 (68.25 lb. to 79.75 lb.)**
Recycled Paper (16 lb. to 24 lb.)
Special Paper (16 lb. to 24 lb.)
Letterhead (16 lb. to 24 lb.)
Color Paper (16 lb. to 24 lb.)
1-Sided Special Paper (16 lb. to 24 lb.)
Banner Paper** (34 lb. to 55.5 lb.)
OHP Transparencies**, envelopes**,
label sheets**, tabs**, postcards**
*Cannot be fe d through the bypa ss tray.
**Can only b e fed through the by pass tray; Mo nochrome
copying/printing on transparencies is supported. Color
copying/printing on transparencies is NOT supported.
Copy sizes
1st Tray:
11" x 17" to 8.5" x 11", 5.5" x 8.5", 8" x 13"*
2nd Tray:
12.25" x 18" to 8.5" x 11", 5.5" x 8.5", 8" x 13"*
Bypass Tray:
12" x 18" to 5.5" x 8.5", 12.25" x 18", 4" x 6",
8" x 13"*, Ba nner Paper
* There are six F oolscap size s: 220 x 330mm (L), 8.5" x 13.5",
8.5" x 13" (L), 8.25" x 13 (L), 8.12" x 13.25" (L) and 8" x 13"
(L). Any one of these size s can be selec ted. For detail s,
please consult with your authorized Konica Minolta Service
representative.
Paper tray
capacity
1st Tray and 2nd Tray:
Thin Paper/Plain Paper/Recycled Paper/
Special Paper/Letterhead/Color Paper/
1-Sided Special Paper: 500 sheets;
Thick Paper 1/1+/ 2/3: 150 sheets
Paper tray
capacity (cont.)
Bypass Tray:
Plain Paper/Recycled Paper/Special
Paper/Letterhead/Color Paper/1-Sided
Special Paper: 150 sheets; Thick Paper
1/1+/2/3/4/OHP Transparencies/
Postcards/ Tabs: 20 sheets; Envelopes: 10;
Banner Paper/Label sheets: 10 sheets
Copy exit tray
capacity
Thin Paper: 100 sheets
Plain Paper: 250 sheets
Thick Paper: 10 sheets
Overhead Projection
Transparencies*: 1 sheet
*Can only be f ed through the byp ass tray; Mon ochrome
copying/printing on transparencies is supported. Color
copying printing on transparencies is NOT supported.
Warm-up time Color and BW less than 25 seconds
(at room temperature/73.4° F)
Image loss width Leading edge: 0.1875"
Trailing edge: 0.125"
Rear edge: 0.125"
Front edge: 0.125"
First copy
C658: Color: 4.0 sec. or less
B/W: 3.0 sec. or less
C558: Color: 4.4 sec. or less
B/W: 3.5 sec. or less
C458: Color: 5.1 sec. or less
B/W: 4.0 sec or less
Print speed*:
(Full Color/B&W)
(Simplex/Duplex)
bizhub C658:
Thin paper: 45 sheets/min.
Plain paper: 65 sheets/min.
Thick 1/Thick 1+/Thick 2: 32 sheets/min.
Thick 3: 28/32 sheets /min.
Thick 4: 27/30 sheets/min. (from Bypass)
bizhub C558:
Thin paper: 38 sheets/min.
Plain paper: 55 sheets/min.
Thick 1/Thick1+/Thick 2/ Thick 3:
28 sheets/min.
Thick 4: 27 sheets/min.
bizhub C45 8:
Thin paper: 31 sheets/min.
Plain paper: 45 sheets/min.
Thick 1/Thick 1+: 28 sheets/min.
Thick 2/Thick 3/Thick 4: 23 sheets/min.
Print speed (ppm)*:
Color/B&W (single sided/plain paper):
Size C658 C558 C 458
11" x 17" 33 27 22
8.5" x 14" 37 31 25
8.5" x 11"P 65 55 45
8.5" x 11"L 47 40 33
5.5" x 8.5"L 65 55 45
8" x 13"L 37 31 25
Col or/B&W (double sided/plain paper):
Size C658 C558 C 458
11" x 17" 33 27 22
8.5" x 14" 37 31 25
8.5" x 11"P 65 55 45
8.5" x 11"L 65 37 31
5.5" x 8.5"L 65 55 45
8" x 13"L 37 31 25
*Using 1st Tray
continued
1
Konica Minolta bizhub C658/C558/C458
Specication & Installation Guide
bizhub C658/C558/C458 Specications continued
Magnication
ratios
Multiple copies 1 to 9,999 sheets
Density control Copy Density: Manual Density Adjustment
Power
requirements
Power
consumption
TEC Value
Dimensions
(with control panel)
Space requirements* 36.9" (W) x 49.1" (D) x 37.8" (H)
Memory (available
hard disk space)
Weight Approx. 242.5 lb.
* T he indicated space re quirements represe nt the space required to pull out
the paper tr ay and the tray extens ion of the bypass tray and w ith the ADF open.
1.0 (full size: 1.00+_0.5% or less)
Enlarge: 121.4%, 129.4%, 154.5%, 200%
Reduce: 78.5%, 73.3%, 64.7%, 50.0%
Minimal: 93%
Stored Zoom Ratios: 3
"Minimal" zoom ratio (90% to 99.9%)
(9 Levels); Background Density: Automatic
and Manual Density Adjustments (9 levels)
120V, 16 A, 60 Hz
0.50 kW or less
C658: 4.0 kWh
C558: 3.2 kWh
C458: 2.5 kWh
24.2" (W) x 27" (D) x 37.8" (H)
4 GB (250 GB HDD)
Duty Cycle
Environmental Requirements
Temperature 50° F to 86° F
Humidity 15% to 85%
Noise during operation
(BW/Color)
Noise during feeder operation
(FS-537/FS-536/FS-533)
Noise during standby
Ozone emission Color: 3.0 mg/h
C658: 75.0 dB/75.0 dB
C558: 75.0 dB/75.0 dB
C458: 74.7 dB/74.5 dB
C658: 73.5 dB/72.4 dB
C558: 73.5 dB/72.4 dB/72.4 dB
C458: — dB/70.9 dB/70.9 dB
C658: 46.0 dB
C558: 46.0 dB
C458: 40.5 dB
B/W: 1.5 mg/h
bizhub C658 Electrical Requirements
Line Options Dedicated NEMA Diagram
Voltage 110 V/120 to 127 V
220 to 240 V AC
Amperage 16 A
Cycles 60 Hz
NEMA Part No. 5-20R
Cord Length 7.5 ft.
Note: The main ele ctrical outle t must be located withi n 7.5 feet from the ri ght rear
corner of the biz hub C658 main unit.
for 5-20R
Up to C658: 220,000/C558: 200,000/C458: 150,000.
The Maximum Monthly Duty Cycle describes the maximum
number of pages a device can output on a monthly basis.
This specication is a guideline intended to offer a comparison
of durability as it relates to the entire Konica Minolta MFP and
printer product line so that the appropriate device can be placed
in order to meet customers needs. If you anticipate that the device
will run at the maximum monthly volume for extended period
of time, we recommend multiple devices or a higher-end device.
bizhub C558/C458 Electrical Requirements
Line Options Dedicated NEMA Diagram
Voltage 120 V AC
Amperage 12 A
Cycles 60 Hz
NEMA Part No. 5-15 R
Cord Length 6.6 ft.
Note: The main ele ctrical outle t must be located withi n 6.6 feet from the right rear
corner of the biz hub C558/C458 ma in unit.
for 5-15R
2
Konica Minolta bizhub C658/C558/C458
bizhub C558/C458 + PC-215 + FS-533 + MK-730
93.07" (2363)
49.88" (1267)
Specication & Installation Guide
Space Requirements
34.69" (881)
49.00" (1244)
9.38"
(238)
61.13" (1553)
(386)
15.19"
36.25" (921)
9.69"
(246)
16.88"
(428)
bizhub C658/C558/C458 + PC-215 + FS-537SD + RU-513 + ZU-609 + PI-507 + LU-207
49.88" (1267)
5.12"
(130)
82.36" (2092)
21.54" (547)
32.19" (818)
Unit: inch (mm)
6.69"
(170)
17.8"
(452)
61.44" (1560.5)
bizhub C658/C558/C458 + PC-215 + FS-536 + RU-513 + LU-302
52.44" (1332)
34.13" (867)
11.63"
(295)
(386)
15.19"
37.8" (960.1)
61.13" (1553)
9.69"
(246)
16.88"
(428)
49.88" (1267)
32.19" (818)
Unit: inch (mm)
Unit: inch (mm)
3
Konica Minolta bizhub C658/C558/C458
AU-202H AU-204H
AU-211P
AU-205H
AU-202H AU-204H
AU-211P
AU-205H
Specication & Installation Guide
Component Considerations
Standard Automatic Duplex Unit
Support Paper Type Thin Paper (14 lb. to 15.5 lb.)
Plain Paper (16 lb. to 24 lb.)
Thick Paper 1 (24.25 lb. to 32 lb.)
Thick Paper 1+ (32.25 to 41.75 lb.)
Thick Paper 2 (42 lb. to 55.5 lb.)
Thick Paper 3 (55.75 lb. to 68 lb.)
Recycled Paper (16 lb. to 24 lb.)
Special Paper (16 lb. to 24 lb.)
Letterhead (16 lb. to 24 lb.)
Color Paper (16 lb. to 24 lb.)
Support Paper Size 12.25" x 18" to 5.5" x 8.5"; 4" x 6"; SRA3; 8" x 13"*; postcards (4" x 6")
Power Requirements Supplied from main unit
Standard Dual Scanner (Single Pass Duplex Document Feeder)
Type Single Pass Duplex Document Feeder
Suppor ted Paper Sizes 1-Sided/2-Sided Originals/Mi xed Originals: 11" x 17"L to 5.5" x 8.5"P
Index Paper: 8.5" x 14"L, 8.5" x 11"P/ L
Supported Paper Weights Single-Sided: 9.25 lb. bond to 55.75 lb. bond
Double-Sided: 13.5 lb. bond to 55.75 lb. bond
Mixed Original: 13.5 lb. bond to 34 lb. bond
1-Sided Thin Paper (9.25 lb. to 13.063 lb.)
1-Sided Plain Paper (13.25 lb. to 55.75 lb.)
2-Sided Plain Paper (13.25 lb. to 55.75 lb.)
Mixed Original Plain Paper (13 lb. to 34 lb.)
Paper Capacit y Max. 300 sheet s (21.25 Ib.)(Single-Sided/Double-Sided Originals);
Index Paper: Ma x. 70 sheets
Paper Transfer Speed 120 image/min (one-sided @ 30 0 dpi) (B&W/CoIor)
240 image/min (two-sided @ 300 dpi) (B&W/CoIor)
Power Requirements Supplied from main unit.
Max. Power Consumption 104.5 W or less
Weight Approximately 32 lb.
4
Konica Minolta bizhub C658/C558/C458
AU-202H AU-204H
AU-211P
AU-205H
Specication & Installation Guide
Component Considerations
FK-514 Fax Kit
Memory Size 128 GB (Std) (128 GB of the 250GB HDD of the main engine is used
for fax memor y)
Number of Stored Pages 10,00 0 Pages (approx. 700 characters per page when 8.5" x 11"
document is stored using ne resolution)
Number of Fax Lines 1 Fax Line (no mount kit required); Add second FK-514 Fax Kit for dual
line fa x capabilities.
Communication ECM/Super G3
Compatible Lines PSTN, PBX
Scanning Line Densit y Ultra Fine: 600 x 600 dpi
Super Fine: 16 dot/mm x 15.4 line/mm, 400 x 4 00 dpi
Fine: 8 dot/mm x 7.7 line/mm, 200 x 200 dpi
Normal: 8 dot/mm x 3.85 line/mm
Modem Speed 2.4 kbps-33.6 kbps
Compression MH/MR/MMR/JBIG
Scanning/(Sending) Original Glass: Max. 11" x 17 "
Paper Size ADF: 11" x 39" (Normal, Fine, Super Fine)
11" x 17" (Ultra Fine, Manual TX)
Recording Paper Size 11" x 17" to 5.5" x 8.5"
Transmission Speed Le ss than 2 sec. (44 V.34, 33.6 Kbps, JBIG)
Scan Spee d 2 sec. (Letter/Fine Mode)
Number of Abbr. Dial 2000
Number of Program Dial 40 0
Number of Group Dial 100 (Up to 500 destinations p er group)
Sequential Multiple Max. 60 0
Station Transmission
Transmitting Functions 2-in-1 TX, Mixed Original, F-Code Transmission, Frame Erase
Transmission, Sharpness, Header/Footer, Memory Transmission,
Quick Memory Transmission, Timer Transmission, Incomplete
Transmission Hold, Manual Transmission, Condential Transmission,
Password Transmission, Polling Transmission, Bulletin Function,
Relay Transmission, Fax Forwarding Function, Overseas TX, V.34 OFF,
ECM OFF
Receiving Functions Duplex Print (RX), Manual Reception, Condential Reception,
Memory Reception, Polling Reception, Bulletin Function, Fax
Forwarding (to any destination stored in the Address Book),
TSI Routing (to any destination stored in the Address Book).
5
Konica Minolta bizhub C658/C558/C458
AU-202H AU-204H
AU-211P
AU-205H
Specication & Installation Guide
Component Considerations continue d
FK-515 Fax Kit
Memory Size 128 GB (Std) (128 GB of the 250GB HDD of the main engine is used
for fax memor y)
Number of Stored Pages 10,00 0 Pages (including all Scan/Box/ Printer/Fax Documents)
Number of Fax Lines Add 1st FK-515 for 3rd Fax Line (Optional); Add 2nd FK-515 for
4th Fax Line (Optional); Must add two FK-514 Fax Kits rst for single
and dual line capabilities before you can add lines 3 and 4. FK-515
requires MK-742 Mount Kit (only one MK-742 Mount Kit required).
Communication ECM/Super G3
Compatible Lines PSTN, PBX
Scanning Line Densit y Ultra Fine: 60 0 x 600 dpi
Super Fine: 16 dot/mm x 15.4 lines/mm, 400 x 400 dpi
Fine: 8 dot/mm x 7.7 lines/mm, 200 x 200 dpi
Normal: 8 dot mm x 3.85 lines, 100 x 100 dpi
Modem Speed 2.4kbps-33.6kbps
Compression MH/MR/MMR/JBIG
Scanning (Sending) Original Glass: Max. 11" x 17"
Paper Size ADF: 11" x 39" (Standard, Fine, Super Fine)
11" x 17" (Standard, Fine, Super Fine)
Recording Paper Size 11" x 17"
Transmission Speed Le ss than 3 sec (V.34, JBIG)
Scan Spee d 1 sec. (Letter/Fine Mode)
Number of Abbr. Dial 2,00 0
Number of Program Dial 40 0
Number of Group Dial 100 (Up to 500 destinations p er group)
Sequential Multiple Max. 60 0
Station Transmission 605 (500 Abbreviated Dials + 100 Manual Dials + 5 Manual Email
Addresses)
Transmitting Functions Mixed Original, F-Code Transmission, Frame Erase Transmission,
Sharpness, Header/Footer, Memory Transmission, Quick Memory
Transmission, Timer Transmission, Incomplete Transmission
Hold, Manual Transmission, Condential Transmission, Password
Transmission, Polling Transmission, Bulletin Transmission,
Fax Forwarding Function, Overseas TX, V.34 OFF, ECM OFF
Receiving Functions Duplex Print (RX), Manual Reception, Condential Reception,
Memory Reception, Polling RX, TSI Routing (to any destination
stored in the Address Book), Fax Forwarding
6
Konica Minolta bizhub C658/C558/C458
AU-202H AU-204H
AU-211P
AU-205H
Specication & Installation Guide
Component Considerations
FS-537 Staple Fi nisher (100 sheets)
Type Staple Finisher
Supported Paper Types
Supported Paper Sizes Out put Tray 1:
Output Tray 1 and Out put Tray 2:
First Tray: 200 sheet s/Second Tray: 3000 sheets (14 lb. to 24 lb.)
1st Tray:
Thin Paper: 200 sheets (14 lb. to 15 lb.)
Plain Paper: 200 sheets (16 lb. to 24 lb.)
Recycled Paper: 200 sheets (16 lb. to 24 lb.)
Thick Paper (24.25 lb. to 79.75 lb.) 20 sheets
OHP Transparency, Postcard, Envelope, Labels, Letterhead,
Tabs: 20 sheets
2nd Tray - Group/Sort Mode:
3,000 sheets (8.5" x 11" or less); 1,500 sheet s (8.5" x 14: or more);
500 sheet s (5.5" x 8.5" or more)
Thin Paper: 3000 sheets (14 lb. to 15 lb., 8.5" x 11"or less)
Plain Paper: 300 0 sheets (16 lb. to 24 lb., 8.5" x 11"or less)
Recycled Paper: 3000 sheets (15 lb. to 24 lb., 8.5" x 11"or less)
Thick Paper: 20 sheets (24.188 lb. to 79.75 lb.)
OHP Transparency, Postcard, Envelope, Labels, Letterhead,
Tabs: 20 sheets
2nd Tray - Offse t Group/Offse t Sort Mode:
3,000 s (8.5" x 11"); 1,500 sheets (8.5" x 14");
500 sheets (B5 or less)
Plain Paper (14 lb. to 24 lb.)
Recycled Paper (14 lb. to 24 lb.)
Thick Paper (24.25 lb. to 79.75 lb.) 20 sheets
Staple:
Thin Paper (14 lb. to 15 lb.)
Plain Paper (16 lb. to 24 lb.)
Recycled Paper (15 lb. to 24 lb.)
8.5" x 11", A4 or less 2 to 9 sheets 200 Copies
8.5" x 14", B4 or more 2 to 9 sheets 100 Copies
12.25" x 18"L*1, 11" x 17"L to 5.5" x 8.5", 4" x 6", SRA3L
Width: 3.5" to 12.60"; Length: 5.5" to 47.25"
Output Tray 2:
12.25" x 18", 11" x 17"L to 7.25" to 10.5"L/P, SR A3L
Width: 5.12" to 12.60"; Length: 5.50" to 18"
*1
12.25" x 18" is 304 .8 x 457.2 mm that is one-si ze larger than A3
*2
There are si x types of fo olscaps: 8. 5" x 13.5"L, 220 x 33 0 mmL, 8 .5" x 13"L, 8.2 5" x 13"L,
8.125" x 13.25" and 8" x 13".
Any one of the se sizes is sele ctable. For de tails, contac t your servic e representati ve. Staple
Settings: 11" x 17"L to 7.25" to 10.5" L/P
10 to 20 sheets 50 Copies
21 to 30 sheets 30 Copies
31 to 40 sheets 25 Copies
41 to 50 sheets 20 Copies
51 to 60 sheets 15 Copies
61 to 100 sheets 10 copies
10 to 20 sheets 50 Copies
21 to 30 sheets 30 Copies
31 to 40 sheets 25 Copies
41 to 50 sheets 20 Copies
51 to 60 sheets 15 Copies
61 to 100 sheets 10 Copies
7
Konica Minolta bizhub C658/C558/C458
AU-202H AU-204H
AU-211P
AU-205H
AU-202H AU-204H
AU-211P
Specication & Installation Guide
Component Considerations continue d
FS-537 Staple Fin isher continued
Mode Non-Sor t/Sort/Group/Sort Staple/Group Staple/Sort Punch/Group
Stacking Capacit y
Staple Mode Thick Mode (24.188 lb. to 79.75 lb.) 2 sheets (Cover Mode)
Staple Capacit y 2 to 50 sheets
Available Options PK-523 Punch Kit (2/3-Hole Punch), JS-602 Job Separator Tray
Power Requirements Supplied from Main Unit
Max. Power Consumption 140 W or less (when all applicable options are inst alled)
Dimensions WxDxH 24.5" (29.6") x 27.2" x 4 0.6"
Weight Approx. Approx. 104 lb.
Consumables MS-10A Staples (5,00 0 Staples x 3) for FS-537
Punch/Sort Staple Punch/Booklet /Center Fold/Tri-Fold, Offset
Output, Staple Output and Punch Output supported via Tray 2
only. (Note: for Booklet Output, Center Fold Output and Tri-Fold
Output, use the FS-537SD.)
Output Tray 1:
Plain Paper (21.25 lb.) 200 sheets (8.5" x 11"L/P, 7.25" x 10.5"L/P;
20 sheets (12" x 18"1, 8.5" x 14"L, 8" x 13"2L) Index cards,
wide paper and non-standard -size paper: 20 sheet s
Thick Paper, Transparency, Postcard (4" x 6"), Envelope, Label she ets,
Letterhead, Index paper (24 lb. to 79.5 lb): 20 sheets.
Output Tray 2:
Plain Paper (21.25 lb.): 3,000 sheets (8.5" x 11"L/P)
Thick Paper (24 lb. to 79.75 lb): 20 sheets.
1
12" x 18" is 304.8 x 45 7.2 mm that is on e-size larger th an A3.
2
There are si x types of fo olscaps: 8. 5" x 13.5"L, 220 x 33 0 mm L, 8 .5" x 13"L,
8. 25" x 13"L, 8.125" x 13.25" and 8" x 13". Any one of thes e sizes is selec table.
For details, contact your service representative.
Staple: Plain Paper (17 to 21.25 lb.): 100 sheet s;
Center Staple and Fold: Plain Paper (17 to 21.25 lb.): 20 sheets;
(21.25 to 24 lb.): 16 sheets;
Corner Front/Back, Center 2-Point, Booklet:
Maximum number of Stapled sheets: 100 sheets
Thin Paper (14 lb. to 15.688 lb.)
Plain Paper (16 lb. to 24 lb.)
Recycled Paper (16 lb. to 24 lb.)
(3rd Output Tray), PI-507 Post Inser ter, ZU -609 Z-Fold Unit
Numbers in p arentheses ( ) ind icate the value s applied when the t ray is pulled outpu t.
JS- 602 Job Separator (3rd Output Tray for FS-537)
NOTE: The JS -602 func tions as a third output tr ay on the FS-537. When this tray i s added, users can s ort print, copy and f ax
8
Applicable FS-537/ FS-537SD
Type Output Tray 3
Feeding f unction Group, Sort
Paper Type Plain Paper (16 lb. bond to 24 lb. bond)
Paper Size 11" x 17"L to 5.5" x 8.5"L
Paper Capacit y Plain Paper (21.25 lb. bond): 8.5" x 11"L: 100 sheets
Other than 8.5" x 11"L: 50 sheets
Dimensions Width 13.44" x Depth 21.13" x Height 5.88"
Weight Approx. 3.88 lb.
output on thre e different tr ays.
Konica Minolta bizhub C658/C558/C458
AU-202H AU-204H
AU-211P
AU-205H
Specication & Installation Guide
Component Considerations
FS-537SD Staple Finisher (A combination of FS-537 (see specs listed above) and integrated saddle stitcher unit)
Supported Paper Weights Thin/Plain Paper (14 lb. to 24 lb.)
20 or 19 Sheets + Thick (55.5 lb.) 1 Sheet
Supported Paper Types Center Staple: Plain Paper (14 lb. to 24 lb.)
Supported Paper Sizes Center Staple & Fold, Half-Fold: 12.25" x 18"L. 11" x 17"L, 8.5" x 14"L,
Number of Sheets 2,500 Sheets (Plain Paper, 20 lb., 8.5" x 11")
that can be stacked
into Output Tray 2
Max. Number of Sheet s 20 Sheets Plain Paper (14 lb. to 24 lb.)
that can be Center-Stapled 19 Sheets Plain Paper (14 lb. to 24 lb.) + 1 Sheet Thick (55.5 lb.)
Max. Number Half-Fold: 5 Sheets
of Folded Sheets Tri-Fold: 3 Sheets
Number of Sheets Plain Paper 21.25 lb.
that can be loaded into Center Folding
the Folding Output Tray When the length of the paper is 13" or more:
1 to 5 sheets stapled 35 sets
6 to 10 sheets stapled 30 sets
11 to 20 sheets stapled 15 sets
When length of paper is 13" or less:
1 to 5 sheets stapled 35 sets
6 to 10 sheets stapled 25 sets
11 to 20 sheets stapled 15 sets
Half-Fold
When the length of the paper is 13" or more:
1 to 5 sheets folded 35 sets
When the length of paper is 13" or less:
1 to 5 sheets folded 35 sets
Tri Fold
1 sheet folded 50 sets
2 sheets folded 40 sets
3 sheets folded 30 sets
Dimensions WxDxH 25.0" (30.6") x 27. 2" x 40.6"
Weight 161.0 lb.
Consumables SK-602 Staples (5,00 0 x 3 Pkg/Case) for FS-537SD
Half-Fold or Tri-Fold: Plain Paper (14 to 24 lb.)
Letter L
Tri-Fold: Letter L
(number in parenthese s indicate dimensions with tray extended)
9
Konica Minolta bizhub C658/C558/C458
AU-202H AU-204H
AU-211P
AU-205H
AU-202H AU-204H
AU-211P
AU-205H
AU-202H AU-204H
AU-211P
Specication & Installation Guide
Component Considerations continue d
PK-523 Punch Kit (For FS-537)
Applicable FS-537/ FS-537SD
Number of Holes 2 or 3 holes
Supported Paper Weights Thin Paper (14 lb. to 15 lb.), Plain Paper (16 lb. to 24 lb.),
Supported Paper Sizes 2-Hole Punch Setting: 11" x 17" to 5.5" x 8.5", 8" x 13"
Power Requirements Supplied from Finisher FS-537
Dimensions WxDxH 5.8" x 25.2" x 9.2"
Weight Approx. Approx. 9.9 lbs.
PI-507 Post Inser ter (For FS-537)
Applicable FS-537/ FS-537SD
Type Post Inserter
Conguration 2 trays (upper and lower)
Cover Paper Type Plain Paper (16 lb. bond to 24 lb. bond), Thick 24.25 lb. to 55.5 lb.
Cover Paper Size
Paper Capacit y Plain Paper (21.25 lb.): 200 sheets for each tray
Power Requirements Supplied from Finisher FS-537
Dimensions Width 20.2" x Depth 25.0" x 8.7"
Weight Approx. 27.6 lb.
Thick Pape r (24.25 lb. to 79.75 lb.)
3-Hole Punch Setting: 11" x 17" to 8.5" x 11", 7.25" x 10.5"
Upper Tray
8.5" x 11"L/P, 7.25" x 10.5"L/P, 5.5" x 8.5"P
Width: 7.19" to 12.25"; Length: 5.5" to 11.69"
Lower Tray
12" x 18"L, 11" x 17"L, 8.5" x 14"L, 8.5" x 11"L/P,
7.25" x 10.5"L/P, 5.5" x 8.5"P
Width: 7.19" to 12.25"; Length: 5.5" to 11.69"
ZU-60 9 Z-Folding Unit (For FS-537)
* The ZU- 609 is installed inside the FS-537/FS-537SD.
10
Applicable FS-537/FS-537SD
Type Z- Fold Unit
Number of Punch Holes 2 holes, 3 holes
Paper Type when Hole Plain Paper (15 lb. bond to 24 lb. bond)
punching is Selected
Paper Size when Hole 11" x 17"L – 5.5" x 8.5"L/P
Punching is Selected
Fold Type Z-Fold
Paper Type when Plain Paper (16 lb. bond – 24. lb. bond)
Z-Folding is Selected
Paper Size when 11" x 17"L, 8.5" x 14"L
Z-Folding is Selected
Power Requirements Supplied from nisher FS-537
Dimensions* Width 4.0" x Depth 19.9" x Height 7.3"
Weight Approx. 9.9 lb.
Konica Minolta bizhub C658/C558/C458
AU-202H AU-204H
AU-211P
AU-205H
AU-202H AU-204H
AU-211P
Specication & Installation Guide
Component Considerations
FS-536 Floor Finisher (50 sheets)
Type Floor Finisher
Output Trays Output Tray 1, Output Tray 2, Folding Output Tray (Top of RU unit)
Supporte d Paper Types O utput Tray 1 & Output Tray 2:
Supported Paper Sizes Out put Tray 1: 12.25" x 18", 11" x 17" to 5.5" x 8.5"L/P, SRA3,
Mode Non-S ort, Sort, Group, Sor t/Off set, Group/Offs et, Sort and Staple
Stacking C apacity Output Tray 1: Thin Paper (14 lb. to 15.5 lb.), Plain Paper (16 lb. to 24 lb.):
Thin Paper (14 lb. to 15 lb.), Plain Paper (16 lb. bond to 24 lb. bond), Recycl ed
Paper (16 lb. to 24 lb.), Thick Paper 1/1+/2/3 (24. 25 lb. bond to 79.75 lb.
bond), OHP Transparencie s, Postcards*, Envelopes*, Label sheets*,
Letterhe ad*, Tabs*, Banner Paper*.
Staple Set tings: Thin Paper (14 lb. to 15 lb.), Plain Paper (16 lb. bond to 23.94
lb. bon d), Recycled Paper (16 lb. to 24 lb.), Thic k Paper 1 (24. 25 lb. bond to 32
lb. bond), Thick Paper 1+ (32.25 lb. to 41.75 lb.),
Thick Paper 2 (42 lb. to 55.5 lb.)
* Fed into Output Tray 1
banner (up to 47.2" long)
Output Tray 2: Group/Sor t: 12.25" x 18", 11" x 17 ", 5.5" to 8.5"L/P
Off set Group/Offset Sor t: 12.25" x 18", 11" x 17" to 5.7" to 7.2", SRA3
Width: 7.188" to 12.625"; Length 5.875" to 18"
Staple: 11" x 17" to 7.25" x 10.5"L/P
Width: 7.188" to 11.688"; Length 5.875" to 17"
Folding Out put Tray:
12.25" x 18", 11" x 17" to 5.5" x 8.5"L/P
Width: 3.5" to 12.5"; Length 5.5" to 18"
200 shee ts. Thick Paper (24.25 to 79.75 lb.), OHP Transparencies,
Postcards, Envel opes or Label sheet s, Letterheads, Tabs: 20 sheets
Output Tray 2 – Group/Sor t Mode: Plain Paper (16 lb. to 24 lb.): 3,000 sheets
of 8.5" x 11" or smaller, or 1,500 sheets of 8 .5" x 14" or larger; or 50 0 sheets
of 5.5" x 8.5" or smaller.
Thick Paper (24. 25 to 79.75 lb.), OHP Transparencies, Postc ards, Envelopes,
Labels, Letterhea ds, Tabs: 20 sheets
2nd Tray – Offse t Group/Offset Sort :
3,000 sheet s (8.5" x 11" or smaller); 1,50 0 sheets (8.5" x 14" or larger);
500 she ets (5.5" x 8.5" or larger)
Thin Paper (14 lb. to 15 lb.)
Plain Paper (16 lb. to 24 lb.)
Recycled P aper (16 lb. to 24 lb.)
Thick Paper (24.2 5 lb. to 79.75 lb.), OHP Transparencie s, Postcard, Envelope,
Label she ets, Letterhead, Tabs: 20 sheets
Staple
Thin Paper (14 lb. to 15 lb.): 50 sheets
Plain Paper (16 lb. to 24 lb.): 50 sheets
Recycled P aper (16 lb. to 24 lb.): 50 sheets
Thick Paper (24.2 5 lb. to 32 lb.): 30 sheets
Thick Paper 1+ (32.25 lb. to 41.75 lb.): 30 sheets
Thick Paper 2 (42 lb. to 55.5 lb.): 20 sheets
Maximum number of s tapled sets of plain paper (l etter size):
2–9 sheet s: 2 00 Sets
10–20 sheet s: 50 Set s
21–30 sheets: 30 Sets
31–40 sheets: 25 Sets
41–50 sheets: 20 Sets
Folding Out put Tray:
Thin Paper (14 lb. to 15.5 lb.)
Plain Paper (16 lb. to 24 lb.)
Recycled P aper (16 lb. to 24 lb.)
Thick Paper (24.2 5 lb. to 79.75 lb.): 20 sheets
100 sheet s
continued
11
Loading...