{SiteSpecifications}{Production}{KodakServiceSupport}{ExternalAndInternal}
Publication No. SS2163-1
Supersedes SS2163-1
SITE SPECIFICATIONS
for the
Kodak Professional DIGITAL MULTIPRINTER
Service Code: 2163
and
Kodak Professional DIGITAL MULTIPRINTER II
Service Code: 2159
16MAY01
13APR99
P179_0700HC
Confidential
Restricted Information
© Eastman Kodak Compa ny, 2001
PLEASE NOTE The information contained herein is based on the experience and knowledge relating to the
subject matter gained by Eastman Kodak Company prior to publication.
No patent license is granted by this information.
Eastman Kodak Company reserves the right to change this information without notice, and
makes no warranty, ex press or implied, with r espect to this informatio n. Kodak shall not be
liable for any loss or damage, including consequential or special damages, resulting from any
use of this information, even if loss or damage is caused by Kodak’s negligence or other fault.
This equipment includes parts and assemblies sensitive to damage from electrostatic
discharge. Use caution to prevent damage during all service procedures.
Table of Contents
Description Page
Equipment Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Packed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Unpacked . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Site Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Operating and Service Space Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Operating Environment Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Telephone Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Hardware Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Software Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Communication Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Disk Space Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Modem Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Interface Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Power Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Air Supply Requirements for the MULTI-PUNCH ACCESSORY. . . . . . . . . . 8
Additional Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2 16MAY01 – SS2163-1
Section 1: Equipment Specifications
Packed
Equipment Specifications
1
⁄
4
1
⁄
1
⁄
in.)
in.)
2
in.)
3
Height:
Width:
Depth:
199.3 cm (78
153.2 cm (60
87 cm (34
Weight: 498.9 kg (1100 lbs)
Unpacked
71.1 cm
(28 in.)
132 cm
(52 in.)
172.7 cm
(68 in.)
P179_0200D
Height: 172.7 cm (68 in.)
Width: 132 cm (52 in.)
Depth: 71.1 cm (28 in.)
Weight: 453.6 kg (1000 lbs)
SS2163-1 – 16MAY01 3
SITE SPECIFICATIONS
4 16MAY01 – SS2163-1
Section 2: Site Specifications
Operating and Service Space Requirements
Site Specifications
122 cm
(48 in.)
91 cm
(36 in.)
76 cm
(30 in.)
203 cm
(80 in.)
P179_0201DC
Right Side: 76 cm (30 in.)
Left Side: 91 cm (36 in.)
Front: 203 cm (80 in.)
Back: 122 cm (48 in.)
Foot Print:
SS2163-1 – 16MAY01 5
0.975 m
2
(10.5 sq ft)
SITE SPECIFICATIONS
Operating Environment Requirements
Room Temperature:
Relative Humidity: 28 - 65%
Altitude: 2424 m (7952.7 ft)
Ambient Light: less than 1000 lux; no exposure to direct sunlight
Heat Output: 2200 BTU per hour
15 - 30
o
C (59 - 86oF)
Telephone Requirements
Type of Line: Data Quality
Type of JACK: RJ11C or RJ41S
Hardware Requirements
Computer: IBM-compatible Dual Pentium 2 or 3, 450 MHz minimum processor
speed, 256 MB RAM
Hard Drive: 6 - 9 Gb SCSI, larger drive for storing images
CD-ROM: 20 X (speed), IDE
Monitor: 19 - 21 in., Color
Display Board: 24 bit, Color
DENSITOMETER: An X-Rite DTP 36 DENSITOMETER must be connected to the host
computer
Software Requirements
Operating System: Microsoft Windows NT 4.0
Operating System
Service Pack:
Microsoft Internet
Explorer:
Service Pack 6 or 6A
Version 5.01, or higher, with the most recent Service Packs and security updates
Communication Requirements
Internet Connection: High-speed internet connect ion t hrough a cabl e mod em
or Digital Subscriber Link (DSL)
Network Port: 100 BaseT or faster
6 16MAY01 – SS2163-1
Site Specifications
Disk Space Requirements
Free Disk Space: 500 MB where the database, images, and jobs will be stored
Disk Space for
Installation:
Other: Add necessary disk sp ace for any other appl ica ti ons or hardware inst alled on the
200 MB
host computer
Modem Requirements
Compatibility and
Compliance:
Software Communications software must be pcANYWHERE by
Modem must be compatible with Microsoft Windows
NT Systems and must comply with local standards
Symantec Corporation
Interface Requirements
If the MULTIPRINTER is the Last
Device:
If the MULTIPRINTER is the First
Device:
Install ACTIVE TERMINATOR 4B4697 on an open SCSI
PORT.
Install ACTIVE TERMINATOR 4B4697 after the last device.
Power Requirements
Important
If the PRINTER is operating with 90 - 110 or 180 - 264 V AC, the JUMPERS on the ISOLATION
TRANSFORMER must be set to the correct position by qualified service personnel.
Usable Voltage Range Hz/Cycles Maximum Amps Approvals
105 - 132 V AC 50 - 60 Hz, single phase 15 Amps UL/CSA/FCC
180 - 264 V AC 50 - 60 Hz, single phase 7.5 Amps CE/VCCI/Australia/Korea
SS2163-1 – 16MAY01 7
Site Specifications
Air Supply Requirements for the MULTI-PUNCH ACCESSORY
Connection:
1
⁄
in. NPT
4
Pressure: 413 - 482 kPa (60 - 70 psi)
Rate:
0.028 m
3
m (1.0 SCFM)
Dirt: less than 5 microns
Oil: less than 0.1 ppm by weight
Moisture: no free liqu id particles
Additional Information
For additional information about requirements for using the Kodak Professional Digital Prin t
Production Software with the PRINTER, go to
“www.kodak.com/global/en/service/software/support/dp2/requirements” and read the information
under “Server/Workst ation Hardware”, “Software”, and “Disk Space” .
Printed in U.S.A. • ss2163_1.fm
EASTMAN KODAK COMPANY
Rochester, NY 14650
Kodak and Kodak Professional are trad emarks.
Loading...