TK-863G
Compact UHF FM Mobile Radio
Conventional & Trunked
GENERAL FEATURES
• 25W, 450-490 MHz
• 32 Systems / 250 GID
• 8 Character Alphanumeric Aliases
Backlit LCD & Keys
•
Function / Status LCD Icons
•
• Transmit / Busy / Call Alert / Warn LED
• 10 Programmable Function Keys
• Inverting Front Panel
• Internal Speaker
• Companded Audio
• Encryption / ANI Board Control
• Emergency Call Features
• DTMF Encode
• Time Out Timer
Busy Channel Lockout
•
Accessory Interface Cable Option
•
• Ignition Sense
• Public Address / Horn Alert Option
• MIL-Spec Standard Mic Included
• MIL-Spec Noise-canceling Mic Option
• MIL-Spec 12-Key Noise-canceling Mic Option
1
2
• Windows Programming & Tuning
• Windows Firmware Uploading
• Front Panel Test / Tune
• Cloning
MIL-STD-810 C/D/E/F
•
CONVENTIONAL SYSTEMS
• QT / DQT
• Single Priority Scan
TRUNKED SYSTEMS
• Kenwood LTR®Features
Options
■ KMC-9C
Control Station
Desktop Microphone
■ KMC-27A
Microphone
(MIL-SPEC Noise-Canceling)
■ KMC-27B
■ KCT-19
Accessories Connector
Cable
■ KCT-35
Extension Cable
for KGP-2A/2B
& KDS-100
Microphone
■ KMC-28A
Keypad Microphone
(MIL-SPEC Noise-Canceling)
■ KCT-18
Ignition Sense Cable
■ KCT-36
Extension Cable
■ KES-3
External Speaker
Specifications
Model TK-863G
GENERAL
Frequency Range 450~490 MHz
Number of Systems Max. 32
Number of Groups Max. 250
Number of Channels (Conventional) Max. 600
Channel Spacing
Wide 25 kHz
Narrow 12.5 kHz
Channel Step 5 kHz, 6.25kHz
Channel Spread 40 MHz
Current Drain
Standby Less than 0.4 A
Receive Less than 1.0 A
Transmit Less than 8.0 A
Antenna Impedance 50
Operating Voltage 13.6 V DC ± 20 %
Operating Temperature Range -22° F ~ +140° F
Frequency Stability ±0.00025%
Dimensions (W x H x D) 5-1/2 x 1-1/2 x 5-3/4 in. (140 x 40 x 145 mm)
Weight (net) 2.07 lbs. (940 g)
FCC ID ALH29383110
Ω
(-30° C ~ +60° C)
(-22° F ~ +140° F)
■ KES-5
External Speaker
■ KLF-2
Line Noise Filter
■ KMB-10
Key Lock Adapter
■ KMB-20
Mounting Case
■ KPS-15
DC Power Supply
All accessories and options may not be available in all markets.
Contact an authorized Kenwood dealer for details and complete list of all accessories and options.
Model TK-863G
RECEIVER (Measurements made per EIA/TIA-603)
Sensitivity (12dB SINAD)
Wide 0.28 µV
Narrow 0.35 µV
Selectivity
Wide 80 dB
Narrow 65 dB
Intermodulation Distortion
Wide 75 dB
Narrow 63 dB
Spurious Response 85 dB
Audio Output 4 W with less than 5% distortion
TRANSMITTER (Measurements made per EIA/TIA-603)
RF Power Output 25 W
Spurious 65 dB
FM Noise
Wide 50 dB
Narrow 45 dB
Modulation
Wide 16KØF3E
Narrow 11KØF3E
Audio Distortion Less than 3%
Kenwood follows a policy of continuous advancement in development.
For this reason specifications may be changed without notice.
®
LTR
is a registered trademark of Transcrypt International.
■ KAP-1
PA/HA Unit
■ KDS-100
Mobile Data Terminal
■ KGP-2A/2B
GPS Receiver /
Modem Unit
GPS-2A
GPS-2B
Applicable MIL-STD
Standard MIL 810C MIL 810D MIL 810E MIL 810F
Low Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, II
High Temperature 501.1/Procedure I, II 501.2/Procedure I, II 501.3/Procedure I, II 501.4/Procedure I, II
Low Temperature 502.1/Procedure I 502.2/Procedure I, II 502.3/Procedure I, II 502.4/Procedure I, II
Temperature Shock 503.1/Procedure I 503.2/Procedure I 503.3/Procedure I 503.4/Procedure I, II
Solar Radiation 505.1/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure I
Humidity 507.1/Procedure I, II 507.2/Procedure II, III 507.3/Procedure II, III 507.4
Sand & Dust 510.1/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, III
Vibration 514.2/Procedure VIII, X 514.3/Procedure I Cat.8 514.4/Procedure I Cat.8 514.5/Procedure I Cat.20
Shock 516.2/Procedure I, II, III, V 516.3/Procedure I, IV, V 516.4/Procedure I, IV, V 516.5/Procedure I, IV, V
Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures
footnotes from Front:
1
Ignition sense requires KCT-18, 19.
2
Public Address / Horn Alert Option requires KAP-1 PA/HA Unit and
KCT-19 ACC Cable Options.
ADS#08008 Printed in USA