Kenmore 110.C6808*, 110.C6809*, 110.C7808*, 110.C7809* Quick Reference Guide

® Quick Start Dryer Guide

We have taken great care to give your new dryer the most convenient and easy-to-use features. Use this guide to help optimize the use of your dryer. This information covers several different models. Your dryer may vary from the model shown and may not have all the cycles and features described. Consult the Use and Care Guide for more detailed instructions. To contact Sears Service, call 1-800-4-MY-HOME® (1-800-469-4663).

Models/Modèles 110.C6808 , C6809 , C7808 , C7809

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from dryer.

Do not dry anything that has ever had anything flammable on it (even after washing).

Failure to follow these instructions can result in death, explosion, or fire.

START

1.Clean the lint screen.

2.Place laundry in dryer.

3.Shut the door.

4.Press POWER.

5.Select Auto Dry Cycle,

• Turn cycle knob to recommended Auto Dry Cycle for type of load being dried.

• If desired, adjust the Dryness Level.

• Temperatures cannot be adjusted on Auto Dry Cycles.

or select Timed Cycle.

•Turn cycle knob to Timed Dry.

•Select drying time using More Time or Less Time buttons.

•Select temperature setting using Temperature button.

6.Select OPTIONS.

•To be alerted when cycle is complete, select the Cycle Signal.

•During Auto Dry Cycles, to be alerted when clothes are still damp, select the Damp Dry Signal.

•To help keep wrinkles from forming after drying is complete, select WRINKLE GUARD®.

7.Press and hold the START button.

WARNING

Fire Hazard

No washer can completely remove oil.

Do not dry anything that has ever had any type of oil on it (including cooking oils).

Items containing foam, rubber, or plastic must be dried on a clothesline or by using an Air Cycle.

Failure to follow these instructions can result in death or fire.

CHECK LINT SCREEN

This feature is a reminder to check whether the lint screen needs to be cleaned. The Check Lint Screen light

come on when the machine is turned on. The light will until the cycle is started or the door is opened.

ESTIMATED TIME REMAINING

A preset time is displayed when an Auto Dry Cycle is selected. During the first few minutes of the drying

process, the cycle time may automatically vary from the time based on the size and fabric type of the load. the end of the drying process, the estimated time will adjust again, showing the final drying time. For Cycles, this time will count down from the start of the

.

W10164639A

Continued on back

the optimal drying in the shortest time. Drying time varies to the type of fabric, size of the load, and dryness

.

Dry Cycles

Auto Dry Cycles are preset to the Normal Dryness Level,

is good for most fabrics. At the end of the cycle, you may the dryness of the load.

the load is drier than you like, you may select the Less Level the next time you dry a similar load.

the load is not as dry as you like, you may select the More Level the next time you dry a similar load. You may drying using a Timed Cycle.

Moisture Sensing

is determined by an electronic sensor that “senses” the of moisture in clothes as they pass over it. When the selected is reached, the dryer goes into a cool down

of up to 10 minutes.

PRESET CYCLE SETTINGS

	DRY CYCLES	TEMPERATURE	TIME*
	TYPE		(Minutes)
	DUTY	High	50
	mixed loads,
	jeans
		High	45
	sheets, cottons
		Medium	40
	work clothes
		Medium	60
	comforters, cotton or
	fiber filled pillows
	DELICATE	Extra Low	25
	blouses, washable

fabrics

Time with Auto Dry Level (Normal) setting. will vary depending on load type and load size.

minutes (depending on the model) of heated drying time. The heating portion of the cycle is followed by a cool down period of up to 10 minutes. Both time and temperature levels can be adjusted.

Express Dry™

This cycle may be used for drying small loads that need a short drying time.

TIMED PRESET CYCLE SETTINGS

	TIMED CYCLES	DEFAULT	DEFAULT
		TEMPERATURE	TIME
	LOAD TYPE
			(Minutes)
	TIMED DRY	High	40
	Heavyweight, bulky items,
	work clothes
	EXPRESS DRY™	High	23
	Small loads
	STEAMCARE PRESET CYCLE SETTINGS
	TIMED CYCLES	DEFAULT	DEFAULT
			TIME
	LOAD TYPE	TEMPERATURE
			(Minutes)
	REFRESH	Medium High	15
	Helps to smooth out wrin-
	kles and reduce odors from
	loads consisting of one to
	four dry items.
	Touch Up	Medium High	20
	Helps to smooth out wrinkles
	in loads left in the dryer for
	an extended period. If
	desired, adjust time and
	temp.

GUARD

GUARD® helps smooth out wrinkles that may form when are not removed promptly at the end of a cycle. WRINKLE ® periodically starts and stops the dryer, tumbling the load

heat for 30, 60, 90 or 150 minutes (depending on your model) you open the dryer door.

WRINKLE GUARD®, the Cycle Signal will sound every minutes unless the signal is turned off.

of Cycle Signal Control

it is selected, the Cycle Signal sounds when a cycle is

. On some models, the variable control lets you select a of soft or loud.

Dryer Rack

dryer rack may be used to machine dry items you do not want to dry or that you would normally line dry. Items containing foam, or plastic must be dried on a clothesline or by using the Air Dry

setting.

This feature is to be used with Timed Dry Cycles only.

W10164639A

TROUBLESHOOTING –

LONG DRY TIMES, LOAD NOT DRYING

Before you call service...

check for the following.

Is the lint screen clogged with lint?

• Clean the lint screen before each load.

Is the exhaust vent or outside exhaust hood clogged with lint?

•Lint should be cleaned out of the exhaust vent at least once every 2 years.

Is the Auto Dry Cycle ending early?

• Do not use a dryer rack with an Auto Dry Cycle.

Are all your Auto Dry Cycle loads consistently not as dry as you would like?

•You may change the preset Dryness Level settings to increase dryness for all Auto Dry Cycles. See “Changing Cycles, Modifiers and Options” in the Use and Care Guide.

See the Use and Care Guide for complete details.

12/07

© 2007 Sears Brands, LLC

® Registered Trademark / TM Trademark / SM Service Mark of Sears Brands, LLC

Printed in U.S.A