Jamo ATM 50 User Manual
ATM 50
DOLBY ATMOS® ELEVATION MODULE
SPECIFICATIONS
FREQUENCY RESPONSE
SENSITIVITY
POWER HANDLING 50W RMS / 200W Peak
NOMINAL IMPEDANCE 8 Ohm
HIGH FREQUENCY DRIVER 25mm (1”) Soft Dome Tweeter
LOW FREQUENCY DRIVER
ENCLOSURE MATERIAL MDF
ENCLOSURE TYPE Sealed MDF Cabinet
INPUTS Single Binding Posts
FINISH Matte Black Polymer Veneer
DIMENSIONS 221mm H, 165mm W, 273mm D
WEIGHT 3.5kg (7.8 lbs)
Conforms to
Dolby Atmos Specication
Conforms to
Dolby Atmos Specication
133mm (5.25”) Aluminized
Polyber Woofer
8.70” H, 6.5” W, 10.25” D
DOLBY ATMOS EFFECTS
Add Dolby Atmos® height effects to any existing
home theater with Jamo ATM 50 on top of your
floorstanding or bookshelf speakers for dynamic,
3-dimensional sound for your music and movies.
HIGH PERFORMANCE ACOUSTICS
Coaxial design utilizes point source for focused,
immersive elevation effects, while the 1” soft
dome tweeter and 5.25” alumized polyfiber
woofer provide dynamic, balanced, distortion-
free sound.
MATTE POLYMER FINISH
Designer aesthetic that blends with any high
performance home theater system.
STRONG, FLEXIBLE GRILLE
Exclusive design provides built-in front stage
occlusion for life-like, powerful overhead
effects.
JAMO.COM
ALL SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
©2016 KLIPSCH GROUP, INC. JAMO IS A REGISTERED TRADEMARK OF KLIPSCH GROUP, INC. IN THE USA AND OTHER COUNTRIES.
A WHOLLY-OWNED SUBSIDIARY OF VOXX INTERNATIONAL CORPORATION.
DOLBY ATMOS IS A REGISTERED TRADEMARK OF DOLBY LABORATORIES.
V01 - 1204
Loading...