USER MANUAL
Thank you very much for choosing the iiyama LCD monitor.
We recommend that you take a few minutes to read carefully through this brief but comprehensive manual before installing and switching on the monitor. Please keep this manual in a safe place for your future reference.
ENGLISH
DEUTSCH
FRANCAIS
NEDERLANDS
POLSKI
ENGLISH
Congratulations,
Your display is designed for both you and the planet!
This display carries the TCO Certified label. This ensures that the display is designed for minimal impact on the climate and natural environment, while offering all the performance expected from top of the line electronic products. TCO Certified is a third party verified program, where every product model is tested by an accredited independent test laboratory. TCO Certified represents one of the toughest certifications for displays worldwide.
Some of the Usability features of the TCO Displays 5.0 requirements:
Visual Ergonomics
Good visual ergonomics in order to improve the working environment for the user and to reduce sight and strain problems. Important parameters are:
●Light levels without color tint, Uniform color and luminance, Wide color gamut
●Calibrated color temperature and gamma curve
●Wide luminance level, Dark black levels, Low monitor blur
Electrical Safety
● Product fulfills rigorous safety standards
Emissions
●Low alternating electric and magnetic fields emissions
●Low acoustic noise emissions
Some of the environmental features of the TCO Displays 5.0 requirements:
●The brand owner demonstrates corporate social responsibility and has a certified environmental management system (EMAS or ISO14001)
●Very low energy consumption both in onand standby mode
●Restrictions on chlorinated and brominated flame retardants, plasticizers and polymers
●Restrictions on heavy metals such as cadmium, mercury and lead (RoHS compliance)
●Both product and product packaging is prepared for recycling
●The brand owner offers take-back options
The requirements included in this label have been developed by TCO Development in co-operation with scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more user-friendly direction.
Our labeling system started with displays in 1992 and is now requested by users and ITmanufacturers all over the world.
For more information, please visit: www.tcodevelopment.com
ENGLISH
Technology for you and the planet
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC Directive 2004/108/EC “EMC Directive” , 2006/95/EC “Low Voltage Directive” and 2009/125/EC “ErP Directive”.
The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas, business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings. All places of operation are characterised by their connection to the public low voltage power supply system.
IIYAMA CORPORATION: Breguetlaan 8, 1438BC Oude Meer The Netherlands
ENGLISH
For displays with glossy bezels the user should consider the placement of the display as the bezel may cause disturbing reflections from surrounding light and bright surfaces.
We recommend recycling of used product. Please contact your dealer or iiyama service center. Recycle information is obtained via the Internet, using the address: http://www.iiyama.com
You can access the Web page of different countries from there.
We reserve the right to change specifications without notice.
All trademarks used in this user manual are the property of their respective owners.
As an ENERGY STAR® Partner, iiyama has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.
TABLE OF CONTENTS
FOR YOUR SAFETY.............................................................................................. |
1 |
SAFETY PRECAUTIONS ................................................................................ |
1 |
SPECIAL NOTES ON LCD MONITORS.......................................................... |
3 |
CUSTOMER SERVICE.................................................................................... |
3 |
CLEANING....................................................................................................... |
3 |
BEFORE YOU OPERATE THE MONITOR ............................................................ |
4 |
FEATURES ...................................................................................................... |
4 |
CHECKING THE CONTENTS OF THE PACKAGE......................................... |
4 |
FITTING AND REMOVAL OF BASE ................................................................. |
5 |
CONTROLS AND CONNECTORS .................................................................. |
6 |
CONNECTING YOUR MONITOR ................................................................... |
7 |
COMPUTER SETTING.................................................................................... |
8 |
ADJUSTING THE VIEWING ANGLE............................................................... |
8 |
OPERATING THE MONITOR................................................................................. |
9 |
ADJUSTMENT MENU CONTENTS ................................................................ |
10 |
SCREEN ADJUSTMENTS............................................................................... |
16 |
POWER MANAGEMENT FEATURE ............................................................... |
19 |
TROUBLE SHOOTING .......................................................................................... |
20 |
RECYCLING INFORMATION................................................................................. |
21 |
APPENDIX ............................................................................................................ |
22 |
SPECIFICATIONS : ProLite E2410HDS ......................................................... |
22 |
SPECIFICATIONS : ProLite E2410HDSD ...................................................... |
23 |
DIMENSIONS .................................................................................................. |
24 |
COMPLIANT TIMING....................................................................................... |
24 |
ENGLISH
ENGLISH
FOR YOUR SAFETY
SAFETY PRECAUTIONS
WARNING
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug your monitor immediately and contact your dealer or iiyama service center. Using the monitor with any object inside may cause fire, electric shock or damage.
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Do not use where water may be splashed or spilt onto the monitor as it may cause fire or electric shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Be sure to operate the monitor only with the specified power supply. Use of an incorrect voltage will cause malfunction and may cause fire or electric shock.
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy objects on the cables. If damaged, the cables may cause fire or electric shock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in power may cause malfunction. It is also advised not to touch the plug in these circumstances as it may cause electric shock.
1 FOR YOUR SAFETY
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not place any heavy objects on the monitor, and that all cables are routed such that children may not pull the cables and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause fire. To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls.
Do not remove the tilt stand when operating the monitor. Ventilation slots on the back of the cabinet will be blocked and the monitor may overheat if the stand is removed. This may cause fire or damage. Operating the monitor on its back, side, upside down or on a carpet or any other soft material may also cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal cable is disconnected. If you do not disconnect them, it may cause fire or electric shock.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid accidents.
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable itself as this may cause fire or electric shock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may damage your computer.
DO NOT PUT FLOPPY DISKS NEAR THE SPEAKERS
Magnetically recorded data, such as on a floppy disk, may become corrupted by the magnetic field produced by the speakers if the disks are placed on or near the speakers.
ENGLISH
OTHERS
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room. For optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches) away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour is recommended as looking at the screen continuously can cause eye strain.
FOR YOUR SAFETY 2
ENGLISH
SPECIAL NOTES ON LCD MONITORS
The following symptoms are normal with LCD monitors and do not indicate a problem.
NOTE When you first turn on the LCD monitor, the picture may not fit in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct position.
Due to the nature of the backlight, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears.
You may find slightly uneven brightness on the screen depending on the desktop pattern you use.
Due to the nature of the LCD screen, an afterimage of the previous screen may remain after switching the image, when the same image is displayed for hours. In this case, the screen is recovered slowly by changing the image or turning off the Power Switch for hours.
Contact your dealer or iiyama service center for the backlight replacement when the screen is dark, flickering or not lighting up. Never attempt to replace it by yourself.
CUSTOMER SERVICE |
|
NOTE |
The fluorescent light used in the LCD monitor may have to be periodically replaced. |
|
For the warranty coverage on this component, please check with local iiyama service |
|
center. |
|
If you have to return your unit for service and the original packaging has been |
|
discarded, please contact your dealer or iiyama service center for advice or |
|
replacement packaging. |
CLEANING
WARNING
CAUTION
NOTE |
CABINET
LCD SCREEN
If you drop any materials or liquids such as water into the monitor when cleaning, unplug the power cable immediately and contact your dealer or iiyama service center.
For safety reasons, turn off the power switch and unplug the monitor before you clean it.
To protect the LCD panel, do not scratch or rub the screen with a hard object.
Never use any of the following strong solvents. These will damage the cabinet and the LCD screen.
Thinner |
Spray-type cleaner |
Benzine |
Wax |
Abrasive cleaner |
Acid or Alkaline solvent |
Touching the cabinet with any product made from rubber or plastic for a long time may cause degeneration or loss of paint on the cabinet.
Stains can be removed with a cloth lightly moistened with a mild detergent solvent. Then wipe the cabinet with a soft dry cloth.
Periodic cleaning with a soft dry cloth is recommended.
Don't use tissue paper etc. because these will damage the LCD screen.
3 FOR YOUR SAFETY
BEFORE YOU OPERATE THE MONITOR
FEATURES
Supports Resolutions up to 1920 × 1080
High Contrast 1000:1 (Typical), ACR Function Available / Brightness 250cd/m2 (Typical), Quick Response Time 5ms (Black, White, Black)
Digital Character Smoothing
Automatic Set-up
Stereo Speakers
2 × 2W Stereo Speakers
Plug & Play VESA DDC2B Compliant
Windows® 95/98/2000/Me/XP/Vista/7 Compliant
Power Management (ENERGY STAR® VESA DPMS Compliant)
Ergonomic Design TCO 5.0
VESA Mounting Standard (100mm×100mm) Compliant
Keyhole for Security Lock
ENGLISH
CHEKING THE CONTENTS OF THE PACKAGE
The following accessories are included in your package. Check to see if they are enclosed with the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama office.
Power Cable* |
D-Sub Signal Cable |
DVI-D Cable |
|
Audio Cable |
Stand-Neck |
Stand-Base |
|
Quick Start Guide |
|
|
|
|
|
|
|
CAUTION |
* The rating of |
the Power Cable enclosed in 120V area is 10A/125V. If you are using |
|
|
|
|
|
a power supply higher than this rating, then a power cable with a rating of 10A/ 250V must be used.However, all guarantees and warranties are void for any problems or damage caused by a power cable not supplied by iiyama.
BEFORE YOU OPERATE THE MONITOR 4
Loading...