QuickSpecs
HPE ProLiant MicroServer Gen10
Overview
Page 1
HPE ProLiant MicroServer Gen10
HPE ProLiant MicroServer Gen10 is a compact and uniquely designed server that is ideal for small and home offices looking to
down their operating expenses.
Front View (External):
Front View (Internal):
1.
(2) USB 3.0 ports
1.
Hard drive screws
2.
Media bay (Optional (1) DVD-RW or (1) SATA SSD)
2.
Hard drive bays
3.
Front bezel lock/unlock indicators
4.
Power on/Standby button and system power LED
5.
Health LED
6.
NIC status LED
7.
Drive activity LED
build their first IT server environment with a form factor that is easy to use.
HPE MicroServer Gen10 helps businesses to provide better and easy access to data, more efficiency in operations, while driving
QuickSpecs
HPE ProLiant MicroServer Gen10
Overview
Page 2
Rear View:
Internal View:
1.
(2) USB 2.0 ports
1.
DIMM slots
2.
(2) USB 3.0 ports
2.
TPM connector
3.
NIC 1 port
3.
LFF/SFF SATA connector
4.
NIC 2 port
4.
SATA connector
5.
Power jack
5.
System board power connector
6.
PCIe Gen3 slots
6.
System battery
7.
VGA port
7.
Internal USB 2.0 port
8.
(2) Display Ports 1.2
8.
Expansion slot 2, PCIe3 x4 (1)
9.
Expansion slot 1, PCIe3 x8 (8, 4, 1)
What's New
New SKU Offerings
• Added a new Performance SKU (P07203-xxx) which replaces the previous Performance SKU (P03698-xxx)
QuickSpecs
HPE ProLiant MicroServer Gen10
Standard Features
Page 3
Processor
AMD Opteron™ X3216 Processor (1.6-3.0GHz/2 compute cores/4 graphic cores/1MB/12-15W)
AMD Opteron™ X3418 Processor (1.8-3.2GHz/4 compute cores/6 graphic cores/2MB/12-35W)
AMD Opteron™ X3421 Processor (2.1-3.4GHz/4 compute cores/8 graphic cores/2MB/12-35W)
Cache Memory
2MB (1 x 2MB) L2 Cache
NOTE: For X3421 processor.
1MB (1 x 1MB) L2 Cache
NOTE: For X3216 processor.
Memory Protection
ECC
Memory
Type
HPE Standard Memory
DDR4 Unbuffered (UDIMM)
DIMM Slots Available
2
Standard
8GB (1 x 8GB) PC4-2400T DDR4 UDIMM
Maximum
32GB (2 x 16GB) PC4-2400T DDR4 UDIMM
NOTE: HPE memory from previous generation servers are not fully compatible with the HPE
NOTE: SKUs with X3216 processor only support up to 1600 MT/s memory speed.
Network Controller
Embedded Broadcom BCM5720 Dual Port Gbe LOM
Expansion Slots
Expansion
Slot #
Technology
Bus
Width
Connector
Width
Form Factor
Notes
1
PCIe 3.0
X8
X8
Low Profile
Open-end
x16 PCIe card
2
PCIe 3.0
X1
X4
Low Profile
Open-end
x16 PCIe card
Storage Controller
The Gen10 controller naming framework has been updated to simplify identification as depicted below.
Embedded Storage Controller
Marvell 88SE9230 PCIe to SATA 6Gb/s Controller
NOTE: Supports RAID 0/1/10 only. No FBWC support.
Essential RAID Controller
HPE Smart Array E208i-p SR Gen10 Controller
NOTE: Supports RAID 0/1/5/10. No FBWC support.
Internal Storage Devices
Optical Drive
Optional: SATA DVD-RW drive
Optional: SATA SSD
Hard Drives
None ship standard
Solid State Drives
None ship standard
Maximum Internal
Storage
Non-hot plug SATA
16TB (4 x 4TB) 3.5" SATA
ProLiant MicroServer Gen10.
NOTE: Only the SKUs with X3421 processor support memory speed up to 2400 MT/s.
**
connector to
support up to
connector to
support up to
For a more detailed breakout of the available Gen10 Smart Array controllers visit the
HPE Smart Array Gen10 Controllers Data Sheet.
QuickSpecs
HPE ProLiant MicroServer Gen10
Standard Features
Page 4
Interfaces
Video
1 Rear VGA port
2 Rear Display ports 1.2
USB 2.0 Ports
3 total (2 rear, 1 internal)
USB 3.0 Ports
4 total (2 rear, 2 front)
Network RJ-45 (Ethernet)
2
Industry Standard
ACPI V5.0 Compliant
PCIe 3.0 Compliant
PXE Support
WOL Support
EMC Class B
USB 2.0
USB 3.0
SATA 6Gb/s
Server Power Cords
All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This
required, please check the ProLiant Power Cables web page.
Power Specifications
To review the power requirements for your selected system, please use the HPE Power Advisor Tool
NOTE: See Technical Specifications section at end of QuickSpecs for Power Specifications.
Power Supply
One (1) 200 Watts non-hot plug, non-redundant Power Supply
System Fans
One (1) non-redundant system fan shipped standard
Operating Systems and
Microsoft Windows Server 2012 R2
Microsoft Windows Server 2016
Red Hat Enterprise Linux (RHEL) 7.4
ClearOS
NOTE: ClearOS, an easy to use OS with an application marketplace, allows you to build a fully
functional server that is just right for you at no upfront cost. It is available via download.
NOTE: HPE ProLiant servers with ClearOS give you a simple, secure, and affordable operating
on what you can do, please visit http://www.hpe.com/servers/clearos.
NOTE: For more information on The Hewlett Packard Enterprise Certified and Supported ProLiant
and our
driver download page: http://www.hpe.com/downloads/microservergen10
Form Factor
Ultra Micro Tower
Compliance
jumper cord is also included with each standard AC power supply option kit. If a different power cord is
located at http://www.hpe.com/info/hppoweradvisor.
Virtualization Software
Support for ProLiant
Servers
system with an intuitive web based graphical user interface that provides a cloud-like experience
on- premise, and an Application Marketplace with over 100 apps and growing. Whether you’re
starting out or scaling, you decide what applications you need and pay as you grow. To learn more
Servers for OS and Virtualization Software and latest listing of software drivers available for your
server, please visit our Support Matrix at:
https://www.hpe.com/us/en/servers/server-operating-systems.html#OperatingSystems
QuickSpecs
HPE ProLiant MicroServer Gen10
Service and Support
Page 5
Service and Support
HPE Pointnext for Industry Standard Servers
response time as you purchase your new server, giving you full entitlement for the term you select.
Optimized Care
Supports maintaining servers at optimum performance availability
HPE Foundation Care 24x7 connects you to HPE 24 hours a day, seven days a week for assistance on
Standard Care
Supports maintaining high level of server availability
HPE Foundation Care Next Business Day connects you to HPE during business hours for assistance on
Related Services
HPE ProLiant Server Hardware Installation
https://www.hpe.com/h20195/V2/GetPDF.aspx/5981-9356EN.pdf
Parts and Materials
Hewlett Packard Enterprise will provide HPE-supported replacement parts and materials necessary to
replaced by Hewlett Packard Enterprise due to malfunction.
For more information
To learn more about HPE ProLiant servers, please contact your Hewlett Packard Enterprise sales
visit: https://www.hpe.com/us/en/services/operational.html
HPE Pointnext delivers confidence, reduces risk and helps customers realize agility and stability. Our
support technology lets you to tap into the knowledge of millions of devices and thousands of experts
to stay informed and in control, anywhere, any time.
Protect your business beyond warranty with HPE Packaged Support Services
HPE Packaged Support Services enable you to order the right service level, length of coverage and
Foundation Care 24x7, three-year Packaged Support Service
resolving issues. Hardware onsite response within four hours if needed. Simplify your support
experience and make HPE your first call for hardware or software questions.
https://www.hpe.com/h20195/V2/GetDocument.aspx?docname=4AA4-8876ENW&cc=us&lc=en
Foundation Care NBD, three-year Packaged Support Service
resolving issues – features next business day hardware onsite response if needed and software call
back within two hours. Simplify your support experience and make HPE your first call for hardware or
software questions.
https://www.hpe.com/h20195/V2/GetDocument.aspx?docname=4AA4-8876ENW&cc=us&lc=en
Provides for the basic hardware installation of Hewlett Packard Enterprise branded servers, storage
devices and networking options to assist you in bringing your new hardware into operation in a timely
and professional manner.
maintain the covered hardware product in operating condition, including parts and materials for
available and recommended engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the maximum
usage limitations as set forth in the manufacturer's operating manual, product QuickSpecs, or the
technical product data sheet will not be provided, repaired, or replaced as part of these services.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives
representative or Hewlett Packard Enterprise Authorized Channel Partner, or
QuickSpecs
HPE ProLiant MicroServer Generation 10 (Gen10)
Pre
-configured Models
Page 6
WW Entry BTO Model
[SKU Number]
870208-xx1
Processor
(1) AMD Opteron™ X3216 (1.6-3.0GHz/2-core/1MB/12-15W) Processor
Memory
8GB (1 x 8GB) PC4-2400T DDR4 UDIMM
With X3216 processor, memory speed only gets up to 1600 MT/s.
Network Controller
Embedded Broadcom BCM5720 Dual Port 1Gbe LOM
Storage Controller
Embedded Marvell 88SE9230 SATA controller
Hard Drive
1TB (1 x 1TB) LFF NHP SATA HDD
Internal Storage
4 LFF NHP SATA HDD cage
Optical Drive Bay
None ship as standard
PCI-Express Slots
2 standard (Low Profile) PCIe 3.0
Power Supply
(1) 200W Non-Hot Plug, Non-Redundant Power Supply
Fans
(1) A non-redundant system fan ships standard
Operating System
ClearOS preloaded
visit: http://www.hpe.com/servers/clearos
Form Factor
Ultra Micro Tower
Warranty
Server Warranty includes 1-Year Parts, 1-Year Labor, 1-Year Onsite support with next business day response
Country Code Key
xx = 00
Americas
xx = 29
Japan
xx = 37
APJ
xx = 42
EMEA
xx = AA
China
NOTE: Total of 2 DIMM slots.
NOTE: ClearOS, an easy to use OS with an application marketplace, allows you to build a fully functional
server that is just right for you at no upfront cost. To learn more on what you can do, please
QuickSpecs
HPE ProLiant MicroServer Generation 10 (Gen10)
Pre
-configured Models
Page 7
Entry Models
Performance Models
[SKU Number]
873830-xxx
P07203-xxx
Processor
(1) AMD Opteron™ X3216
(1) AMD Opteron™ X3418
Memory
8GB (1 x 8GB) PC4-2400T DDR4 UDIMM
With X3216 processor, memory speed only gets up to
1600 MT/s.
8GB (1 x 8GB) PC4-2400T DDR4 UDIMM
Network Controller
Embedded Broadcom BCM5720
Embedded Broadcom BCM5720
Storage Controller
Embedded Marvell 88SE9230 SATA controller
Embedded Marvell 88SE9230 SATA controller
Hard Drive
None ship as standard
None ship as standard
Internal Storage
4 LFF NHP SATA HDD cage
4 LFF NHP SATA HDD cage
Optical Drive Bay
None ship as standard
None ship as standard
PCI-Express Slots
2 standard (Low Profile) PCIe 3.0
2 standard (Low Profile) PCIe 3.0
Power Supply
(1) 200W Non-Hot Plug,
(1) 200W Non-Hot Plug,
Fans
(1) A non-redundant system fan ships standard
(1) A non-redundant system fan ships standard
Operating System
None ship as standard
None ship as standard
Form Factor
Ultra Micro Tower
Ultra Micro Tower
Warranty
Server Warranty includes 1-Year Parts, 1-Year Labor,
Year Onsite support with next business day response
Server Warranty includes 1-Year Parts, 1-Year Labor,
(1.6-3.0GHz/2-core/1MB/12-15W) Processor
1-
NOTE: Total of 2 DIMM slots.
Dual Port 1Gbe LOM
Non-Redundant Power Supply
(1.8-3.2GHz/4-core/2MB/12-35W) Processor
Dual Port 1Gbe LOM
Non-Redundant Power Supply
1-Year Onsite support with next business day
response
QuickSpecs
HPE ProLiant MicroServer Generation 10 (Gen10)
Pre
-configured Models
Page 8
Solution Models
[SKU Number]
P04923-xxx
Processor
(1) AMD Opteron™ X3421 (2.1-3.4GHz/4-core/2MB/12-35W) Processor
Memory
8GB (1 x 8GB) PC4-2400T DDR4 UDIMM
Network Controller
Embedded Broadcom BCM5720 Dual Port 1Gbe LOM
Storage Controller
Embedded Marvell 88SE9230 SATA controller
Hard Drive
None ship as standard
Internal Storage
4 LFF NHP SATA HDD cage
Optical Drive Bay
None ship as standard
PCI-Express Slots
2 standard (Low Profile) PCIe 3.0
Power Supply
(1) 200W Non-Hot Plug, Non-Redundant Power Supply
Fans
(1) A non-redundant system fan ships standard
Operating System
None ship as standard
Form Factor
Ultra Micro Tower
Warranty
Server Warranty includes 1-Year Parts, 1-Year Labor, 1-Year Onsite support with next business day
Others
Inclusive of an internal 8GB USB Drive which preloads ClearOS and ClearVM
Country Code Key
xxx = S01
Americas
xxx = 291
Japan
xxx = 375
AP
xx = 421
EMEA
response
QuickSpecs
HPE ProLiant MicroServer Generation 10 (Gen10)
Core Options
Page 9
HPE Unique Options - Recommended
HPE MicroServer Gen10 SFF NHP SATA Converter Kit (Recommended)
870213-B21
NOTE: This kit works to accommodate your SFF NHP HDD into the LFF NHP drive cage.
HPE MicroServer Gen10 Slim SFF SATA Enablement Kit (Recommended)
870212-B21
NOTE: This kit works to accommodate your SFF NHP SSD into the media bay.
MicroServer Gen10 is now qualified with HPE 240GB SATA RI SFF RW DS SSD (875507-B21).
HPE Memory
Unbuffered with ECC DIMMs (UDIMMs) - Recommended
HPE 8GB (1x8GB) Single Rank x8 DDR4-2400 CAS-17-17-17 Unbuffered Standard Memory Kit
(Recommended)
862974-B21
HPE 16GB (1x16GB) Dual Rank x8 DDR4-2400 CAS-17-17-17 Unbuffered Standard Memory Kit
862976-B21
NOTE: Only the SKUs with X3421 processor support memory speed up to 2400 MT/s.
NOTE: SKUs with X3216 processor only support up to 1600 MT/s memory speed.
HPE Optical Drives - Recommended
HPE 9.5mm SATA DVD-ROM Optical Drive (Recommended)
726536-B21
HPE 9.5mm SATA DVD-RW Optical Drive (Recommended)
726537-B21
HPE Hard Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane)
NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
6G SATA Non-Hot Plug LFF (3.5-inch) Standard (MDL) Drives - Recommended
HPE 1TB SATA 6G Midline 7.2K LFF (3.5in) RW 1yr Wty HDD (Recommended)
801882-B21
6G SATA Non-Hot Plug LFF (3.5-inch) Standard (MDL) Drives - Extended
HPE 4TB SATA 6G Midline 7.2K LFF (3.5in) RW 1yr Wty HDD (Extended)
801888-B21
6G SATA Non-Hot Plug LFF (3.5-inch) ETY HDD - Recommended
HPE 1TB SATA 6G Entry 7.2K LFF (3.5in) RW 1yr Wty HDD (Recommended)
843266-B21
NOTE: Please see the HPE Hard Drives QuickSpecs for Technical Specifications and additional information.
HPE Solid State Drives - Recommended
HPE 240GB SATA 6G Read Intensive SFF (2.5in) RW 3yr Wty Digitally Signed Firmware SSD (Recommended)
875507-B21
NOTE: Please use HPE MicroServer Gen10 Slim SFF SATA Enablement Kit (870212-B21) to accommodate
this SFF SSD into the media bay.
HPE Networking - Recommended
HPE Ethernet 1Gb 4-port 331T Adapter (Recommended)
647594-B21
HPE Networking - Extended
HPE Ethernet 1Gb 2-port 332T Adapter (Extended)
615732-B21
HPE Ethernet 10Gb 2-port 521T Adapter (Extended)
867707-B21
NOTE: Please see the related NIC QuickSpecs for Technical Specifications and additional information.
NOTE: The HPE PCIe adapters listed here can only support Server OSes.
(Recommended)
should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for
all components.
QuickSpecs
HPE ProLiant MicroServer Generation 10 (Gen10)
Core Options
Page 10
HPE Computation and Graphics Accelerators - Recommended
HPE AMD Radeon Pro WX2100 Graphics Accelerator (Recommended)
Q1P47A
NOTE: It adds additional graphics power to the native capability of the server as well as providing
https://pro.radeon.com/en-us/product/wx-series/radeon-pro-wx-2100/
additional 2 mini-DisplayPort™ and 1 DisplayPort™ 1.4.
For additional information:
QuickSpecs
HPE ProLiant MicroServer Gen10
Additional Options
Page 11
HPE Security - Recommended
HPE Trusted Platform Module 2.0 Kit (Recommended)
745823-B21
NOTE: The TPM (Trusted Platform Module) is a microcontroller chip that can securely store artifacts used
oyed server and must be retained. Misplacing or losing the
key could result in data loss.
HPE Smart Array Controllers
The Gen10 controller naming framework has been updated to simplify identification as depicted below. For a
Essential RAID Controllers - Recommended
HPE Smart Array E208i-p SR Gen10 (8 Internal Lanes/No Cache) 12G SAS PCIe Plug-in Controller
(Recommended)
804394-B21
HPE Disk Backup
HPE RDX+ 500GB External Backup System
B7B66B
HPE RDX+ 1TB External Backup System
B7B69B
HPE RDX 2TB USB3.0 External Disk Backup System
E7X53B
HPE RDX+ 3TB USB 3.0 External Disk Backup System
P9L72A
HPE RDX+ External Docking System
C8S07B
HPE USB Keyboard and Mouse - Recommended
HPE USB US Keyboard/Mouse Kit (Recommended)
631341-B21
HPE USB JP Keyboard/Mouse Kit (Recommended)
631360-B21
HPE USB AP/INTL Keyboard/Mouse Kit (Recommended)
672097-373
to authenticate the server platform. These artifacts can include passwords, certificates and encryption keys.
NOTE: The TPM key is unique to every TPM depl
more detailed breakout of the available Gen10 Smart Array controllers visit the HPE Smart Array Gen10
Controllers Data Sheet.
QuickSpecs
HPE ProLiant MicroServer Gen10
Memory
Page 12
HPE ProLiant MicroServer Generation 10
Maximum Memory
32GB of maximum memory is available with the installation of 2 x 16 GB UDIMM Memory kits.
Memory
Slot
1A
2B
Standard
8 GB
8 GB
Empty
16 GB
16 GB
Empty
Optional
16 GB
8 GB
8 GB
32 GB
16 GB
16 GB
Maximum
32 GB
16 GB
16 GB
Following are memory options available from HPE:
HPE Memory
Unbuffered with ECC DIMMs (UDIMMs)
HPE 8GB (1x8GB) Single Rank x8 DDR4-2400 CAS-17-17-17 Unbuffered Standard
Memory Kit
862974-B21
HPE 16GB (1x16GB) Dual Rank x8 DDR4-2400 CAS-17-17-17 Unbuffered Standard
Memory Kit
862976-B21
QuickSpecs
HPE ProLiant MicroServer Gen10
Storage
Page 13
5
Media bay for optional (1) optical drive or (1) SATA
SSD for boot-drive
1, 2, 3, 4
Four (4) non-hot plug drive bays
Drive Support
Removable Media
Quantity
Supported
Position
Supported
Controller
DVD-RW Drive
1 5 Integrated SATA
SATA SSD
1 5 Integrated SATA
Maximum Storage Capacity
Internal
SATA
16.0TB (4 x 4TB)
QuickSpecs
HPE ProLiant MicroServer Gen10
Technical Specifications
Page 14
System Unit
Dimensions (H x W x D)
(with feet)
9.25 x 9.06 x 10.00 in (23.5 x 23.0 x 25.4 cm)
Weight (approximate)
Maximum
installed)
21.36 lb (9.70 kg)
Minimum
installed)
14.32 lb (6.50 kg)
Input Requirements
Rated Line Voltage
100 V AC to 240 V AC
Rated Input Current
3.5 A (at 100 V AC)
Rated Input
Frequency
50 to 60 Hz
Rated Input Power
200W Power Supply
244 W (at 115 V AC)
Power Specifications
To review typical system power ratings use the Power Advisor which is
cooling.html
Power Supply Output
Rated Steady-State
200 W Power Supply
200 W (at 200 VAC)
Maximum Peak Power
200 W Power Supply
200 W (at 200 VAC)
System Inlet
10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C
reduced if operating with a fan fault or above 30°C (86°F).
Relative Humidity
Operating
The unit shall be fully functional from 10% to 90%
operating temperature range of 0°C to 40°C.
Non-operating
5 to 95% relative humidity (Rh), 38.7°C (101.7°F)
maximum wet bulb temperature, non-condensing.
Altitude
Operating
3050 m (10,000 ft). This value may be limited by
m/min (1500 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable altitude
change rate is 457 m/min (1500 ft/min).
(Four drives, two
DIMMs, optical drive
or SSD and two
expansion boards
(one hard drive and
one DIMM installed,
no media drive or
expansion board
(per power supply)
(per power supply)
Temperature
(non-condensing)
available via the online tool located at
https://www.hpe.com/us/en/integrated-systems/rack-power-
URL:
Power
200 W (at 100 VAC),
200 W (at 100 VAC),
per every 305 m (1.8°F per every 1000 ft) above sea level to a maximum
of 3050 m (10,000 ft), no direct sustained sunlight. Maximum rate of
change is 20°C/hr (36°F/hr). The upper limit and rate of change may be
limited by the type and number of options installed.
NOTE: System performance during standard operating support may be
relative humidity, 28°C maximum web bulb
temperature, (non-condensing) across the
the type and number of options installed.
Maximum allowable altitude change rate is 457
QuickSpecs
HPE ProLiant MicroServer Gen10
Technical Specifications
Page 15
Acoustic Noise
Listed are the declared A-Weighted sound power levels (LWAd) and
and declared in accordance with ISO 9296 (ECMA 109).
Configuration
Lightly loaded
Heavily loaded
CPU type and quantity
AMD OpteronTM
cTDP x1
AMD OpteronTM
processor at 35W
cTDP x1
DIMM type, capacity
and quantity
8 GB UDIMM
8 GB UDIMM
2400MT/s x1
HDD type and
quantity
2.5” SFF NHP HDD
3.5” LFF NHP HDD
500 GB x4
Idle Sound Power
Level in Bels LWAd
3.8 Bels
4.0 Bels
Operating Sound
LWAd
3.8 Bels
4.0 Bels
Idle Sound Pressure
Level LpAm
26.0 dBA
30.4 dBA
Operating Sound
Pressure Level LpAm
26. dBA
31.0 dBA
Note
The listed sound levels apply to listed
Rep. refer to EMESC website for further technical
details regarding the configurations listed above.
NOTE: Acoustics levels presented here accounts for test configuration
reference only.
Emissions Classification
FCC Rating
Class B
Normative Standards
CISPR32, EN55032, EN55024
NOTE: Product conformance to cited product specifications is based on
statements.
Environment-friendly
End-of-life
Hewlett Packard Enterprise offers end-of-life product return, trade-in,
treatment information for each product type for use by treatment facilities.
Hewlett Packard Enterprise web site. These instructions may be used by
declared average bystander position A-Weighted sound pressure levels
(LpAm) when the product is operating in a 23°C ambient environment.
Noise emissions were measured in accordance with ISO 7779 (ECMA 74)
processor at 15W
2400MT/s x1
500 GB x1
Power Level in Bels
configurations. Additional options may result in
increased sound levels. Please have your HPE
only and acoustics level will vary depending on system configuration
NOTE: Values are subject to change without notification and are for
(EMC)
sample (type) testing, evaluation, or assessment. This product or family
of products is eligible to bear the appropriate compliance logos and
Products and Approach
Management and
Recycling
and recycling programs, in many geographic areas, for our products.
Products returned to Hewlett Packard Enterprise will be recycled,
recovered or disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
This information (product disassembly instructions) is posted on the
FCC CFR 47, Pt15; ICES-003; CNS13438; GB9254
K32; K24; EN61000-3-2;
EN61000-3-3;
QuickSpecs
HPE ProLiant MicroServer Gen10
Technical Specifications
Page 16
recyclers and other WEEE treatment facilities as well as Hewlett Packard
Enterprise equipment.
Enterprise OEM customers who integrate and re-sell Hewlett Packard
QuickSpecs
HPE ProLiant MicroServer Gen10
Summary of Changes
Page 17
Date
Version History
Action
Description of Change
06-Aug-2018
Version 5
Added
Added a new Performance SKU (P07203-xxx) which replaces
the previous Performance SKU (P03698-xxx).
Changed
Core Options and Additional Options were revised.
07-May-2018
Version 4
Added
Added a new Solution model (P04923-xxx) which bundles
05-Feb-2018
Version 3
Added
Added new Entry and Performance Models.
25-Sept-2017
Version 2
Added
Smart Buy models were added to the NA version.
05-Jun-2017
Version 1
Added
New QuickSpecs.
Sign up for updates
© Copyright 2018 Hewlett Packard Enterprise Development LP. The information contained herein is
subject to change without notice. The only warranties for Hewlett Packard Enterprise products and
services are set forth in the express warranty statements accompanying such pr
Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise
shall not be liable for technical or editorial errors or omissions contained herein.
Microsoft and Windows NT are US registered trad
AMD, the AMD Arrow logo, AMD Opteron™, and combinations thereof, are trademarks of Advanced Micro
Devices, Inc.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
a00008701
ClearOS and ClearVM on an internal USB drive.
Added a new SSD offering.
Added a new networking adaptor offering.
Added a new graphics accelerator offering.
Added a new smart array controller offering.
enw - 15950 - Worldwide - V5 - 6-August-2018
oducts and services.
emarks of Microsoft Corporation.
Loading...