c04111526 — DA – 14264 — Worldwide — Version 48 — April 1, 2015
Front I/O: 1 USB 2.0, 2 USB 3.0, 1 Headphone, 1 Microphone, 1 1394a
c04111526 — DA – 14264 — Worldwide — Version 48 — April 1, 2015
Choice of 850W, 88% or 1125W, 90% Efficient Power
Supplies
Rear I/O: Rear Power Button & LED, PS/2 Ports, 1 1394a, 4
USB 2.0, 2 USB 3.0, 2 RJ-45 to Integrated GbE, 1 Audio Line
In, 1 Audio Line Out, 1 Microphone, 1 Serial Port
16 DIMM Slots for DDR3 ECC Memory
3 PCIe x16 Gen3 Slots (3rd Slot available ONLY when 2nd
CPU is installed)
1 PCIe x16 (x8) Gen3 (Available ONLY when 2nd CPU is
installed), 1 PCIe x8(x4) Gen3, 1 PCIe x8(x4) Gen2, 1 PCI Slot
2 Intel Xeon Processors E5-2600 family
Windows 7 Professional 32-bit/64*
Windows 8.1 Pro 64 downgrade to Win7 Professional 32/64
Windows 8.1 Pro 64-bit OS
HP Installer Kit for Linux (includes drivers for 64-bit OS versions of RHEL 6 & 7 and SUSE Linux
Enterprise Desktop 11)
Red Hat Enterprise Linux Desktop (Preinstall NOT available; 1 year paper license only)
c04111526 — DA – 14264 — Worldwide — Version 48 — April 1, 2015
Windows 7 Enterprise 32/64
Windows XP Professional 32/64 (on select configurations)*
SUSE Linux Enterprise Desktop 11
Red Hat Enterprise Linux Desktop/Workstation 5, 6, 7
Notes: *See the "Windows XP Support Matrix for Z Workstations" at:
http://www.hp.com/support/linux_hardware_matrix
Notes: For detailed OS/hardware support information for Linux, see:
http://www.hp.com/support/linux_hardware_matrix
Featuring
Intel®
vPro™
Technolog
y
Intel® Turbo
Boost
Technology1
Intel Xeon
E5-2643 processor
Intel Xeon
E5-2620 processor
Intel Xeon
E5-2697 v2 processor
Intel Xeon
E5-2695 v2 processor
Intel Xeon
E5-2690 v2 processor
Intel Xeon
E5-2687W v2
processor
Intel Xeon
E5-2680 v2 processor
Intel Xeon
E5-2670 v2 processor
Intel Xeon
E5-2667 v2 processor
Intel Xeon
E5-2660 v2 processor
Intel Xeon
E5-2650 v2 processor
Intel Xeon
E5-2643 v2 processor
Intel Xeon
E5-2640 v2 processor
Intel Xeon
E5-2637 v2 processor
Intel Xeon
E5-2630 v2 processor
Intel Xeon
E5-2620 v2 processor
c04111526 — DA – 14264 — Worldwide — Version 48 — April 1, 2015
Intel Xeon
E5-2609 v2 processor
Intel Xeon
E5-2603 v2 processor
1
The specifications shown in this column represent the following: (all core maximum turbo steps, one
core maximum turbo steps). Turbo boost stepping occurs in 100MHz increments. Processors that do
not have turbo functionality are denoted as N/A.
Turbo [all core,1C]Ex. 2.9 GHz [4,9] turbo is 8C turbo to 3.3, 1C turbo to 3.8
Available Processor
Disclaimers
When ordering two processors, the second processor must be the same as the first. Intel processor
numbers are not a measurement of higher performance. Processor numbers differentiate features
within each processor family, not across different processor families. See:
http://www.intel.com/products/processor_number/ for details.
Quad-Core, Six-Core, Eight-Core , Ten-Core and Twelve-Core technologies are designed to improve
performance of multithreaded software products and hardware-aware multitasking operating systems
and may require appropriate operating system software for full benefits; check with software provider
to determine suitability; Not all customers or software applications will necessarily benefit from use of
these technologies.
64-bit computing on Intel® 64 architecture requires a computer system with a processor, chipset, BIOS,
operating system, device drivers, and applications enabled for Intel® 64 architecture. Processors will
not operate (including 32-bit operation) without an Intel® 64 architecture-enabled BIOS. Performance
will vary depending on your hardware and software configurations. See:
http://www.intel.com/info/em64t for more information.
Intel® Xeon® processor E5-2687W is ONLY available with Liquid Cooling AND with the 1125W Power
Supply.
Intel® Xeon® processors E5-2643, E5-2637 v2, E5-2643 v2, E5-2667 v2, E5-2687W v2, E5-2690 v2 and
E5-2697 v2 REQUIRE the 1125W Power Supply Option.
I/O Slots (see system
board section for more
details)
2 PCI Express Gen3 x16 slots
1 PCI Express Gen3 x16 slot - Available ONLY when 2nd CPU is installed.
1 PCI Express Gen3 x8 slot - with x16 connector. - Available ONLY when 2nd CPU is installed.
1 PCI Express Gen3 x4 slot - with x8 connector
1 PCI Express Gen2 x4 slot - with x8 connector
1 PCI 32bit/33MHz slot
1 Mechanical-only slot, supporting cards which mount only to the I/O bulkhead and not the
motherboard (half-length, full-height)
The PCIe x8 connectors are open ended, allowing a PCIe x16 card to be seated in the slot.
Bays (see storage section
for more details)
4 internal 3.5" bays (4 with acoustic dampening rail assemblies)
3 external 5.25" bays
Top bay device depth limit: 175mm
Middle bay device depth limit: 206mm
Bottom bay device depth limit: 206mm
2 USB 3.0, 1 USB 2.0, 1 Headphone, 1 Microphone, and 1 IEEE 1394a
c04111526 — DA – 14264 — Worldwide — Version 48 — April 1, 2015
4 USB 2.0
1 Serial
PS/2 keyboard and mouse
2 RJ-45 to integrated Gigabit LAN
1 Audio Line-In, 1 Audio Line-Out, 1 Microphone
6 USB 2.0 ports available by three separate 2x5 headers. Each 2x5 header supports either one HP
Internal USB Port Kit (EM165AA) or one Media Card Reader.
Chassis Dimensions (H x
W x D)
44.4 x 20.3 x 52.5 cm (17.5 x 8.0 x 20.7 in)
Exact weights depend upon configuration
Minimum config: 21.1kg (46.7lbs)
Typical config: 22.8kg (50.4lbs)
Maximum config: 29.2kg (64.3lbs)
5° to 35° C (40° to 95° F)
-40° to 70° C (-40° to 158° F)
Maximum Altitude (nonpressurized)
850W 88% Efficient wide-ranging, active Power Factor Correction
1125W 90% Efficient wide-ranging, active Power Factor Correction
NOTE: The 1125W power supply can also supply 1275W of output power when the input voltage is
greater than 105V. If the input voltage is less than 105V, but greater than 90V for any reason, the
maximum power that can be drawn is 1125W. An uninterruptible power supply (UPS) is highly
recommended if 1275W output power is desired.
The 1125W Power Supply can also supply 1450W of output power when the input voltage is greater
than 180V under all conditions.
The Z820 power supply efficiency reports can be found at these links:
850W - http://www.plugloadsolutions.com/psu_reports/HEWLETT%20PACKARD_623195-
001_ECOS%202620%201_850W_Report%20(2).pdf
1125W - http://www.plugloadsolutions.com/psu_reports/HEWLETT%20PACKARD_623196-
001_ECOS%202921_1125W_Report(1275w).pdf
2-channel SATA 6.0 Gb/s Interface (2 channels e-SATA configurable)
4-channel SATA 3.0 Gb/s Interface
8-channel 6 Gb SAS interface (8 SAS connectors on the motherboard), SAS ports can be ported
externally by using the SAS Bulkhead and/or Back Panel connector Kits
USB 3.0, USB 2.0, IEEE 1394a
Hard Drive Controllers
Supported
Workstation ISV
Certifications
See the latest list of certifications at
http://www.hp.com/united-states/campaigns/workstations/partnerships.html
c04111526 — DA – 14264 — Worldwide — Version 48 — April 1, 2015
Intel Xeon E5-2600 Series - CTO
Intel® Xeon® Processor E5-2643 4C 3.30GHz
Intel® Xeon® Processor E5-2620 6C 2.00GHz
Intel Xeon E5-2600 Series - Z820 AMO
Z820 Xeon E5-2690 8C 2.90 20MB 1600 CPU2
Z820 Xeon E5-2680 8C 2.70 20MB 1600 CPU2
Z820 Xeon E5-2670 8C 2.60 20MB 1600 CPU2
Z820 Xeon E5-2667 6C 2.90 15MB 1600 CPU2
Z820 Xeon E5-2665 8C 2.40 20MB 1600 CPU2
Z820 Xeon E5-2660 8C 2.20 20MB 1600 CPU2
Z820 Xeon E5-2650 8C 2.00 20MB 1600 CPU2
Z820 Xeon E5-2643 4C 3.30 10MB 1600 CPU2
Z820 Xeon E5-2640 6C 2.50 15MB 1333 CPU2
Z820 Xeon E5-2630 6C 2.30 15MB 1333 CPU2
Z820 Xeon E5-2620 6C 2.00 15MB 1333 CPU2
Z820 Xeon E5-2609 4C 2.40 10MB 1066 CPU2
Z820 Xeon E5-2603 4C 1.80 10MB 1066 CPU2
Intel Xeon E5-2600 v2 Series - CTO
Intel® Xeon® Processor E5-2603 v2 4C 1.80GHz
Intel® Xeon® Processor E5-2609 v2 4C 2.50GHz
Intel® Xeon® Processor E5-2620 v2 6C 2.10GHz
Intel® Xeon® Processor E5-2630 v2 6C 2.60GHz
Intel® Xeon® Processor E5-2637 v2 4C 3.50GHz
Intel® Xeon® Processor E5-2640 v2 8C 2.00GHz
Intel® Xeon® Processor E5-2643 v2 6C 3.50GHz
Intel® Xeon® Processor E5-2650 v2 8C 2.60GHz
Intel® Xeon® Processor E5-2660 v2 10C 2.20GHz
Intel® Xeon® Processor E5-2667 v2 8C 3.30GHz
Intel® Xeon® Processor E5-2670 v2 10C 2.50GHz
Intel® Xeon® Processor E5-2680 v2 10C 2.80GHz
Intel® Xeon® Processor E5-2687W v2 8C 3.40GHz
Intel® Xeon® Processor E5-2690 v2 10C 3.00GHz
Intel® Xeon® Processor E5-2695 v2 12C 2.40GHz
Intel® Xeon® Processor E5-2697 v2 12C 2.70GHz
Intel Xeon E5-2600 v2 Series - Z820 AMO
Z820 Xeon E5-2603 v2 4C 1.80 10MB 1333 CPU2
Z820 Xeon E5-2609 v2 4C 2.50 10MB 1333 CPU2
Z820 Xeon E5-2620 v2 6C 2.10 15MB 1600 CPU2
Z820 Xeon E5-2630 v2 6C 2.60 15MB 1600 CPU2
Z820 Xeon E5-2637 v2 4C 3.50 15MB 1866 CPU2
c04111526 — DA – 14264 — Worldwide — Version 48 — April 1, 2015
Z820 Xeon E5-2640 v2 8C 2.00 20MB 1600 CPU2
Z820 Xeon E5-2643 v2 6C 3.50 25MB 1866 CPU2
Z820 Xeon E5-2650 v2 8C 2.60 20MB 1866 CPU2
Z820 Xeon E5-2660 v2 10C 2.20 25MB 1866 CPU2
Z820 Xeon E5-2667 v2 8C 3.30 25MB 1866 CPU2
Z820 Xeon E5-2670 v2 10C 2.50 25MB 1866 CPU2
Z820 Xeon E5-2680 v2 10C 2.80 25MB 1866 CPU2
Z820 Xeon E5-2687W v2 8C 3.40 25MB 1866 CPU2
Z820 Xeon E5-2690 v2 10C 3.00 25MB 1866 CPU2
Z820 Xeon E5-2695 v2 12C 2.40 30MB 1866 CPU2
Z820 Xeon E5-2697 v2 12C 2.70 30MB 1866 CPU2
Intel® Xeon® processors E5-2643, E5-2637 v2,E5-2643 v2, E5-2667 v2, E5-2687W v2, E5-2690 v2 and
E5-2697 v2 REQUIRE the 1125W Power Supply Option.
Racking and Physical
Security
HP ZR30w 30-inch S-IPS LCD Monitor
HP ZR2740w 27-inch LED Backlit IPS Monitor
HP ZR2440w 24-inch LED Backlit IPS Monitor
HP Z Display Z24i 24-inch IPS LED Backlit Monitor
HP Z Display Z23i 23-inch IPS LED Backlit Monitor
HP Z Display Z22i 21.5-inch IPS LED Backlit Monitor
HP DreamColor LP2480zx Professional Display
HP SAS (Serial Attached SCSI) Hard Drives for HP Workstations
600GB SAS 15K rpm 6Gb/s 3.5" HDD
450GB SAS 15K rpm 6Gb/s 3.5" HDD
300GB SAS 15K rpm 6Gb/s 3.5" HDD
Sub-Section Description/Notes
NOTE: NCQ (Native Command Queuing) not supported in Red Hat Enterprise Linux
For hard drives, 1 GB = 1 billion bytes; TB = 1 trillion bytes. Actual formatted capacity is less. Up to 12
GB of hard drive (or system disk) is reserved for the system recovery software (XP and XP Pro). Up to 3
GB of system disk is reserved for system recovery software (Vista).
SATA (Serial ATA) Hard Drives for HP Workstations
3.0TB SATA 7200 rpm 6Gb/s 3.5" HDD
2.0TB SATA 7200 rpm 6Gb/s 3.5" HDD
1TB SATA 7200 rpm 6Gb/s 3.5" HDD
500GB SATA 7200 rpm 6Gb/s 3.5" HDD
500GB SATA 7.2K SED SFF HDD
c04111526 — DA – 14264 — Worldwide — Version 48 — April 1, 2015
today as
After
Market
Option)
Sub-Section Description/Notes
Up to 5 SATA drives, 5 SAS, drives, or 6 SATA 2.5", Small Form Factor (SFF) drives
8 port SAS Controller included on the system board
HP Solid State Drives (SSDs) for Workstations
Samsung Enterprise 240GB SATA SSD
Samsung Enterprise 480GB SATA SSD
Intel Pro 1500 180GB SATA SSD
HP 256GB SATA 6Gb/s SED Opal 1 SSD
HP 256GB SATA 6Gb/s SED Opal 2 SSD
Sub-Section Description/Notes
Note 1:
The 256GB Self-Encrypting Drive (SED) version has similar performance to the standard 256GB SSD. It
is also available in Opal 1.0 and Opal 2.0 versions
PCIe SSDs for HP Workstations
HP Z Turbo Drive 512GB SSD*
HP Z Turbo Drive 256GB SSD*
Fusion ioFX 410GB PCIe Accelerator
* Each drive requires a PCIe x4 (minimum) slot to be available. Full performance is obtained only when
using PCIe slots connected to the CPU. Non-CPU PCIe slots may see a decrease of up to 10%. Please see
slot configuration recommendations at www.hp.com/go/zturbo. Note that graphics cards,
Thunderbolt™, and other devices will require PCIe slots.
Factory integrated RAID on motherboard for SATA drives
RAID 0 Configuration - Striped Array
RAID 0 Data Configuration -- Boot/OS Drive + 2
Drive Striped Array
RAID 1 Configuration - Mirrored Array
RAID 10 Configuration - Striped/Mirrored Array
RAID 5 Configuration - Parity Array
HP SAS Back Panel Connector kit
HP SAS Back Panel Connector kit
Must have 4 or
fewer SAS hard
drives to
configure this
option
c04111526 — DA – 14264 — Worldwide — Version 48 — April 1, 2015
HP SAS Back Panel Bulkhead Connector Kit
HP SAS Back Panel Bulkhead
HP SAS Back
Panel Connector
kit required.
Internal SAS HD
drives are not
supported
LSI MegaRAID® 9260-8i SAS 6Gb/s ROC RAID Card and iBBU07 Battery Backup Unit
LSI MegaRAID® 9260-8i SAS 6Gb/s ROC RAID Card
LSI 9270-8i SAS 6Gb/s ROC RAID Card and iBBU9 Battery Backup Unit
LSI iBBU09 Battery Backup Unit
LSI 9270-8i SAS 6Gb/s ROC RAID Card
Integrated SAS Controller
Integrated LSI SAS 2308 Controller with RAID
0/1/1E/10
Integrated SATA 6.0 Gb/s Controller
Integrated SATA 6.0 Gb/s Controller
Integrated SATA 3.0 Gb/s Controller
Integrated SATA 3.0 Gb/s Controller
RAID arrays greater than 2 TB in size are fully supported.
NOTE 1: Minimum of 2 hard drives needed. All hard drives must be identical (size/speed/type/bus/functional
capabilities). Must have 2, 3 or 4 HD Drives.
NOTE 2: Minimum of 3 SATA hard drives needed. All hard drives must be identical (size/speed/type/bus/functional
capabilities).
At least 3 HD Drives required. May have 4th and 5th HD Drives. Drives must be the same drive
(size/speed/type/functional capability).
NOTE 3: 2 SATA or 2 SAS hard drives required. All hard drives must be identical (size/speed/type/bus/functional
capabilities).
NOTE 4: Minimum of 3 SATA hard drives needed. All SATA hard drives must be identical
(size/speed/type/bus/functional capabilities). Must have 3 or 4 HD Drives. 5 HD Drives not allowed.
NOTE: SATA hardware RAID is supported on Linux systems that have support for the Intel RSTe technology. The
Linux kernel, with built-in software RAID, provides excellent functionality and performance. It is a good alternative
to hardware-based RAID. Please visit http://www.hp.com/support/linux_hardware_matrix for RAID capabilities
with Linux.
LSI RAID Definitions:
IS: Striping of 2 or more HDDs into a single logical volume
IM: Mirroring of 2 HDDs into a single logical volume
IME: Mirroring of 3 or more HDDs into a single logical volume
NOTE: Specific user-configured hardware SAS RAID configurations are supported on this Linux system. Please visit:
http://www.hp.com/support/linux_hardware_matrix for details.
NVIDIA NVS300 512MB Graphics
c04111526 — DA – 14264 — Worldwide — Version 48 — April 1, 2015
NVIDIA NVS 310 512MB Graphics
NVIDIA NVS 315 1GB Graphics
NVIDIA Quadro 410 512MB Graphics
NVIDIA Quadro K600 1GB Graphics
AMD FirePro V3900 1GB Graphics
NVIDIA Quadro K2000 2GB Graphics
NVIDIA Quadro K5000 4GB Graphics
Contact
Factory for
support for
greater than 2
cards
AMD FirePro W7000 4GB Graphics
Contact
Factory for
support for
greater than 2
cards
NVIDIA Quadro K4000 3GB Graphics
Contact
Factory for
support for
greater than 2
cards
NVIDIA Quadro K6000 12GB Graphics
Some
configuration
restrictions
may exist.
Contact
Factory, as
needed, for
review.
For configurations not listed in this specification, please contact the factory for review
High Performance GPU
Computing
NVIDIA Tesla C2075 Compute Processor
NVIDIA Tesla K20c Compute Processor
NVIDIA Tesla K40 Compute Processor
Intel Xeon Phi 3120AIB Compute Processor
NOTE #1: Up to two C2075 processors are supported.
Only supported with the Z820 1125W Chassis.
Must have add-in graphics card in addition to the C2075.
Supported Graphics cards are Quadro 600, Quadro 2000, and Quadro K6000.
Not supported in a configuration that has BOTH E5-2687 Processors and Quadro K6000 Graphics.
NOTE #2: Up to two K20 processors are supported. Only supported with the Z820 1125W Chassis. Must
have add-in graphics card in addition to the K20. Supported Graphics cards are Quadro K600, Quadro
K2000, and Quadro K5000.
c04111526 — DA – 14264 — Worldwide — Version 48 — April 1, 2015
NOTE #3: Up to two K40 processors are supported.
Only supported with the Z820 1125W Chassis.
Must have add-in graphics card in addition to the K40.
Supported Graphics cards are Quadro K600, Quadro K2000, and Quadro K5000.
NOTE #4:
-1 card is supported
-Card must be put in slot 6
DDR3-1866 ECC Unbuffered DIMMs - CTO
8GB DDR3-1866 ECC Unbuffered RAM
4GB DDR3-1866 ECC Unbuffered RAM
2GB DDR3-1866 ECC Unbuffered RAM
DDR3-1866 ECC Registered DIMMs - CTO
32GB DDR3-1866 ECC Load Reduced (LR) RAM
16GB DDR3-1866 ECC Registered RAM
8GB DDR3-1866 ECC Registered RAM
4GB DDR3-1866 ECC Registered RAM
Sub-Section Description/Notes
For details on the supported memory configurations on the HP Z820 Workstation, please refer to the
System Technical Specifications - System Board section of this document.
DIMMs should be distributed across all four memory channels for optimal performance.
Each processor supports up to 4 channels of DDR3 memory. To realize full performance at least 1
DIMM must be inserted into each channel.
The CPUs determine the speed at which the memory is clocked. If a 1066MT/s capable CPU is used in
the system, the maximum speed the memory will run at is 1066MT/s regardless of the specified speed
of the memory.
NOTE: You cannot intermix registered and unbuffered DIMMs. The system will not work.
NOTE: You cannot intermix LR DIMMs with either registered or unbuffered DIMMs. The system will not
work.
NOTE 1: 32GB DDR3-1866 LR DIMM - 1 DIMM/Channel runs at a maximum of 1866MT/s and 2
DIMM/channel runs at a maximum of 1600MT/s or as determined by the CPU whichever is lower.
DDR3-1600 ECC Registered DIMMs - AMO
32GB DDR3-1333 ECC Load Reduced (LR) RAM
DDR3-1866 ECC Unbuffered DIMMs - AMO
HP 4GB (1x4GB) DDR3-1866 ECC RAM
HP 2GB (1x2GB) DDR3-1866 ECC RAM
DDR3-1866 ECC Registered DIMMs - AMO
HP 4GB (1x4GB) DDR3-1866 ECC Reg RAM
HP 8GB (1x8GB) DDR3-1866 ECC Reg RAM
HP 16GB (1x16GB) DDR3-1866 ECC Reg RAM
32GB DDR3-1333 ECC Load Reduced (LR) RAM
c04111526 — DA – 14264 — Worldwide — Version 48 — April 1, 2015
NOTE: You cannot intermix registered and unbuffered DIMMs. The system will not work.
NOTE: You cannot intermix LR DIMMs with either registered or unbuffered DIMMs. The system will not
work.
Multimedia and Audio
Devices
Integrated Intel/Realtek HD ALC262 Audio
HP Thin USB Powered Speakers
Optical and Removable
Storage
HP Slot Load DVD+/-RW Drive
HP 16X DVD+/-RW SuperMulti SATA Drive (nonLightscribe)
HP 16X DVD-ROM SATA Drive (non Lightscribe)
HP DX115 Removable HDD Frame/Carrier
HP 14-in-1 Media Card Reader
HP 15-in-1 Media Card Reader
Actual speeds may vary. Does not permit copying of commercially available DVD movies or other
copyright protected materials. Intended for creation and storage of your original material and other
lawful uses. Double Layer discs can store more data than single layer discs. However, double-layer
discs burned with this drive may not be compatible with many existing single-layer DVD drives and
players.
As Blu-ray is a new format containing new technologies, certain disc, digital connection, compatibility
and/or performance issues may arise, and do not constitute defects in the product. Flawless playback
on all systems is not guaranteed. In order for some Blu-ray titles to play, they may require a DVI or
HDMI digital connection and your display may require HDCP support. HD-DVD movies cannot be played
on this workstation.
NOTE 1: May only order one.
NOTE 2: Cannot be 2nd drive.
HP IEEE 1394b FireWire PCIe Card
HP Thunderbolt-2 PCIe 1-port I/O Card*
* Connect in a flash with 4X USB 3.0 bandwidth on an optional high-performance Thunderbolt™ 2.0
port.
Thunderbolt is new technology. Thunderbolt cable and Thunderbolt device (sold separately) must be
compatible with Windows. To determine whether your device is Thunderbolt Certified for Windows, see
https://thunderbolttechnology.net/products.
Thunderbolt™ 2.0 is planned to be available via an optional add-in card in early 2014.
c04111526 — DA – 14264 — Worldwide — Version 48 — April 1, 2015
Networking and
Communications
Integrated Intel 82579LM PCIe GbE Controller
Broadcom NetXtreme Gigabit Ethernet Plus NIC
(PCIe)
HP X520 10GbE Dual Port Adapter
HP 10GbE SFP+ SR Transceiver
HP 361T PCIe Dual Port Gigabit NIC
Intel Ethernet I210-T1 PCIe
NOTE 1: "Gigabit" Ethernet indicates compliance with IEEE standard 802.3ab for Gigabit Ethernet, and
does not connote actual operating speed of 1 Gb/sec. For high speed transmission, connection to a
Gigabit Ethernet server and network infrastructure is required.
NOTE 2: This is a PCI Express card based on the Broadcom 5761 chip. This card does not support DASH
1.1 manageability on the Z820.
Racking and Physical
Security
Security Cable with Kensington Lock
HP Chassis Intrusion Sensor
HP Z6/8 Adjustable Rail Rack Kit, Flush Mount
HP PS/2 Standard Keyboard
HP PS/2 Optical Scroll Mouse
HP USB 2-Button Optical Scroll Mouse
HP USB Optical 3-Button Mouse
HP USB Smart Card Keyboard
HP 2.4GHz Wireless Keyboard & Mouse
HP USB Optical 3-Button 2.9M OEM Mouse
HP SpaceExplorer 3D USB Controller
HP SpacePilot 3D USB Intelligent Controller
HP USB 1000dpi Laser Mouse
Product numbers QY774AA-QY778AA represent the new 2012 products with the updated product
design. The previous models will be phased out over time.
c04111526 — DA – 14264 — Worldwide — Version 48 — April 1, 2015
HP SAS Back Panel Connector Kit
HP Optical Bay HDD Mounting Bracket
HP ENERGY STAR Qualified Configuration
Note 1: The HP Internal USB Port kit has a single USB 2.0 type A connector.
Note 2: No hot plug / hot swap supported with eSATA
HP Remote Graphics Software (RGS) 6.0
PDF Complete - Corporate Edition
Cyberlink Media Suite & PowerDVD
Media playback
and authoring
software
MS Office Home & Business 2013
NOTE 1: Available as a free download here: www.hp.com/go/performanceadvisor
NOTE 2: Supports both 32 and 64 bit versions of Windows 7 Professional and Enterprise, Windows XP
Professional and Enterprise, and RHEL V6
NOTE 3: Must select as a Configure to Order option. Delivered as a "Drop in the Box" CD
NOTE 4: Must be selected as a Configure to Order option. Delivered in the form of a "Drop in the Box"
CD.
Genuine Windows® 7 Ultimate 64-bit
Genuine Windows® 7 Professional 64-bit
Genuine Windows® 7 Professional 32-bit
Red Hat Enterprise Linux (RHEL) Workstation - Paper License (1yr)
Windows 8.1 Pro Downgrade to Windows 7 Professional 64-bit
Windows 8.1 Pro Downgrade to Windows 7 Professional 64-bit (National Academic)
Windows 8.1 Simplified Chinese Edition 64-bit
NOTE 1: See http://www.microsoft.com/windows/windows-7/ for support details.
NOTE 2: This second OS must be ordered with the HP Linux Intaller Kit as the first OS.
System Technical Specifications
c04111526 — DA – 14264 — Worldwide — Version 48 — April 1, 2015
Custom Form Factor, 13" x 14.25" (330.20mm x 361.95mm)
Processor Socket
16 slots (8 slots per CPU)
DDR3, RDIMM (Registered) or UDIMM (Unbuffered), ECC, LR (Load Reduction) DIMMs
Memory Modes
NUMA (Non-Uniform Memory Architecture), Memory Node Interleave
1066 MT/s, 1333 MT/s, & 1600 MT/s
System Technical Specifications
c04111526 — DA – 14264 — Worldwide — Version 48 — April 1, 2015
NOTE: CPU0 is located on the main system board. CPU1 (optional) is located on an add-in riser card.
Supports up to 128GB using UDIMMs
Supports up to 256GB using RDIMMs
Supports up to 512GB using LRDIMMs
Memory Configuration
(Supported)
Not all memory configurations possible are represented. Not all memory configurations shown
are available as CTO. Please check Ordering Guide for supported configurations.
Only ECC DIMMs are supported.
UDIMM (Unbuffered), RDIMM (Registered) and LR DIMM (Load Reduction) memory cannot be
mixed. All memory installed in the system must be either UDIMM or RDIMM or LR DIMMs.
Do not install memory modules into memory slots if corresponding processor is not installed.
Dual processor configurations with memory modules installed for only one processor is not
supported.
PCIe3 x16, qty 3 (qty 2 when optional 2nd CPU is not installed)
NOTE:
3rd PCIe x16 slot is ONLY available when 2nd CPU is installed. This is Slot #4 on the system board and is
designated by a white-colored PCIe connector.
PCIe3 x16 (8), qty 1 (qty 0 when optional 2nd CPU is not installed)
NOTE:
This slot is ONLY available when 2nd CPU is installed. This is Slot #3 on the system board and is
designated by a white-colored PCIe connector.
PCIe3 x8 (4), qty 1 (open-ended connector)
System Technical Specifications
c04111526 — DA – 14264 — Worldwide — Version 48 — April 1, 2015
PCIe2 x8 (4), qty 1 (open-ended connector)
PCI 32b, 33MHz (supports 64-bit cards), qty 1
Supported Drive
Interfaces
Integrated 2-channel SATA 6.0Gb/sec controller and
Integrated 4-channel 3.0Gb/sec controllers with
RAID 0, 1, 5, 10 and NCQ. (Factory integrated RAID is
Microsoft Windows only)
Integrated 8-channel SAS 6.0Gb/sec controller with
HW RAID 0, 1, 10
SATA: RAID 0, 1, 5, 10
SAS: HW RAID 0, 1, 10
Integrated Intel 82579 and 82574 Controllers
Memory Integrated 48KB receive buffer and 8KB transmit buffer
Data rates supported 10/100/1000 Mb/s
Compliance IEEE 802.3, 802.3AB and 802.3u compliant, 802.3x flow control
Bus architecture PCIe 1.0a
Data path width X1 to each controller
Data path speed 2.5 Gb/s per direction transfer rate
Data transfer mode Bus-master DMA
Power requirement 1.0 watts @ +3.3V AUX supply
Boot ROM support Yes
Network transfer rate 10BASE-T (half-duplex) 10 Mb/s
10BASE-T (full-duplex) 20 Mb/s
100BASE-TX (half-duplex) 100 Mb/s
100BASE-TX (full-duplex) 200 Mb/s
1000BASE-T (full-duplex) 2000 Mb/s
Management capabilities: WOL, PXE 2.1, DASH 1.1, Intel AMT/vPro Technology
Integrated Trusted
Platform Module
6 ports/connectors (Included are 2 eSATA* configurable with optional eSATA* After-Market Option cable
kit)
* No hot plug / hot swap supported with eSATA
6 USB 2.0 ports available with three separate 2x5
headers. Each header supports either a HP Internal
USB Port Kit (EM165AA) or USB Media Card reader.
Each Internal Port Kit has one (1) USB 2.0 connector.
System Technical Specifications
c04111526 — DA – 14264 — Worldwide — Version 48 — April 1, 2015
Third-Party adaptors are available to convert the
2x5 headers to two USB 2.0 connectors. For these
solutions, the adaptor should include a minimum of
8 inches of cable between the 2x5 female connector
and the USB 2.0 connector to insure sufficient cablerouting length.
One header for the CPU fans and memory fans
Front Control
Panel/Speaker Header
CMOS Battery Holder –
Lithium
Integrated Trusted
Platform Module
Integrated TPM 1.2
Power Supply Headers
Power Switch, Power
LED & Hard Drive LED
Header
Front power switch, front power and hard drive LED. Rear power switch and rear power LED. Drive LED
header on system board
Clear Password Jumper
850W 88% Efficient, Custom PSU
(Wide-Ranging, Active PFC)
1125W/1275W*/1450W*
90% Efficient, Custom PSU
(Wide-Ranging, Active PFC)
100 VAC
115-127 VAC
200-240 VAC
Operating Line Frequency Range
11A @ 100-127
VAC
5.5A @ 200-240
VAC
12A @ 100 VAC
12A @ 115-127
VAC
10A @ 200-240
VAC
Heat Dissipation (Configuration and software
dependent)
Typical = 2142 btu/hr (540kg-cal/hr)
Max = 3335 btu/hr (840 kg-cal/hr)
Typical = 2773 btu/hr (699 kg-cal/hr)
Max-1 = 3878 btu/hr (977 kg-cal/hr)
Max-2 = 5002 btu/hr (1260 kg-
cal/hr)
Max-3 = 5624 btu/hr (1417 kg-
cal/hr)
(2) 80x25 mm variable speed
(2) 80x25 mm variable speed
ENERGY STAR Qualified
(Configuration dependent)
System Technical Specifications
c04111526 — DA – 14264 — Worldwide — Version 48 — April 1, 2015
The Z820 850W power supply
efficiency report can be found at this
link:
http://www.plugloadsolutions.com/
psu_reports/HEWLETT%20PACKARD
_623195-001_ECOS%202620%201_
850W_Report%20(2).pdf
The Z820 1125W power supply
efficiency report can be found at this
link:
http://www.plugloadsolutions.com/
psu_reports/HEWLETT%20PACKARD
_623196-001_ECOS%
202921_1125W_Report(1275w).pdf
FEMP Standby Power Compliant @115V
(<2W in S5 - Power Off)
EuP Compliant @ 230V
(<0.5 W in S5 - Power Off)
CECP Compliant @ 220V
(<4W in S3 - Suspend to RAM)
Yes; Configuration dependent
Yes; Configuration dependent
Power Consumption in sleep mode
(as defined by ENERGY STAR) - Suspend to RAM (S3)
(Instantly Available PC)
Surge Tolerant Full Ranging Power Supply
(withstands power surges up to 2000V)
*Input voltage restriction
NOTE: The 1125W power supply can also supply 1275W of output power when the input voltage is
greater than 105V. If the input voltage is less than 105V, but greater than 90V for any reason, the
maximum power that can be drawn is 1125W. An uninterruptible power supply (UPS) is highly
recommended if 1275W output power is desired.
The 1125W Power Supply can also supply 1450W of output power when the input voltage is greater than
180V under all conditions.
Integrated Gigabit
Ethernet
Access Panel Solenoid
Lock Header
Access Panel Intrusion
Sensor Header
Yes, as part of Front UI (Control Panel) cable header
Memory Fan Connector
1x Intel Xeon E5-2609 (Four-Core)
1x 500GB SATA 7200/1x16X DVD-ROM SATA
System Technical Specifications
c04111526 — DA – 14264 — Worldwide — Version 48 — April 1, 2015
Heat Dissipation**
(Btu/hr)
Example Configuration
#2
(ENERGY STAR
QUALIFIED)
2x Intel Xeon E5-2640 (Six-Core)
3x 500GB SATA 7200/1x16X DVD-ROM SATA
Heat Dissipation**
(Btu/hr)
2x Intel Xeon E5-2680 (Eight-Core)
2x 300GB SAS 15K/1x16X DVD+-RW SuperMulti SATA
System Technical Specifications
c04111526 — DA – 14264 — Worldwide — Version 48 — April 1, 2015
Heat Dissipation**
(Btu/hr)
2x Intel Xeon E5-2687 (Eight-Core)
16x 4GB DDR3 1600 (RDIMM)
4x 300GB SAS 15K/1x16X DVD+-RW SuperMulti SATA
Heat Dissipation**
(Btu/hr)
Example Configuration
#5
(ENERGY STAR
QUALIFIED)
2x Intel Xeon 2687W (Eight-Core)
16x 32GB DDR3 1600 (LRDIMM)
2x 3TB SATA/1x 16X DVD+-RW SuperMulti SATA
On-Idle
(ENERGY STAR® Idle (S0))
ENERGY STAR® PMAX
Windows running Linpack
and Viewperf
ENERGY STAR® "Sleep"
(S3)
System Technical Specifications
c04111526 — DA – 14264 — Worldwide — Version 48 — April 1, 2015
ENERGY STAR® "Standby"
(Off) (S5)
Heat Dissipation**
(Btu/hr)
On-Idle
(ENERGY STAR® Idle (S0))
ENERGY STAR® PMAX
Windows running Linpack
and Viewperf
ENERGY STAR® "Sleep"
(S3)
ENERGY STAR® "Standby"
(Off) (S5)
Declared Noise Emissions (Entry-level and High-end configurations)
System Configuration
(Entry level)
Dual Intel Xeon E5-2660 2.20 GHz with Standard Heatsinks
4 - DDR3 2 GB 1600 MT/s UDIMM
Single NVIDIA Quadro NVS 300
Single Blu-ray BD-R
Single 1 TB 7200 RPM SATA 3.5" HDD
Declared Noise Emissions
(in accordance with ISO
7779 and ISO 9296)
Deskside Sound Pressure
(LpAm, decibels)
Hard drive Operating
(random reads)
DVD-ROM Operating
(sequential reads)
System Configuration
(High-end)
Dual Intel Xeon E5-2687W 3.10 GHz with Liquid Cooling
16 - DDR3 4 GB 1600 MT/s RDIMM
Single Blu-ray BD-R
Dual 600 GB 15K RPM SAS 3.5" HDD
Declared Noise Emissions
(in accordance with ISO
7779 and ISO 9296)
Deskside Sound Pressure
(LpAm, decibels)
Hard drive Operating
(random reads)
DVD-ROM Operating
(sequential reads)
Environmental
Requirements
Operating: 5° to 35° C (40° to 95° F)
Non-operating: -40° to 60° C (-40° to 140° F)