Hobart QE1 User Manual
Item # ________________________________
Quantity _______________________________
C.S.I. Section 11400
QE SERIES ROLL-IN MEDIUM
FOOD EQUIPMENT
TEMPERATURE REFRIGERATORS
STANDARD FEATURES
■ Choice of Finishes:
❑ Stainless Steel Exterior and Interior;
❑ Stainless Steel Exterior, DuraFinish
Aluminum Interior
■ Galvanized back and bottom
■ Condensing unit mounted on the top
■ Hot gas condensate removal
■ R134a Refrigerant
■ Solid Doors Field Rehingeable
■ Exterior, Solar Powered Digital Thermometer
is Standard on all Cabinets
■ Easily Removable Door Gasket without the
Use of Tools
■ Non-Standard Door Hinging Available at No
Extra Cost
MODELS
❑ QE1 – Single Section Unit
❑ QED1 – Single Section Roll-Through Unit
❑ QE2 – Two Section Unit
❑ QED2 – Two Section Roll-Through Unit
❑ QE3 – Three Section Unit
❑ QED3 – Three Section Roll-Through Unit
OPTIONS
❑ Roll-Through
❑ Rear Cladding
❑ Padlock Posts – Field Installed by Others
Specifications, Details and Dimensions on Inside and Back.
QE SERIES ROLL-IN MEDIUM TEMPERATURE REFRIGERATORS
■ Stainless Steel Heated Inclined Ramp
■ 120/601 Units have Ten Foot Cord and Plug
R
701 S Ridge Avenue, Troy, OH 45374 • 937-332-3000 • 1-800-333-7447
QE SERIES ROLL-IN MEDIUM
TEMPERATURE REFRIGERATORS
SELLING FEATURES
DOWN DUCT AIR DISTRIBUTION SYSTEM: Ensures
consistent cabinet temperatures.
EASILY REMOVABLE GASKETS: Solid door gaskets are
easily removed without tools for cleaning or replacement,
eliminating the expense of a service call.
FIELD REHINGEABLE DOOR: Maximum flexibility for layout
changes.
CHOICE OF TWO FINISHES: Allows customer to choose the
best finish for their application. Units are available in:
stainless steel exterior and interior; stainless steel exterior,
DuraFinish aluminum interior with stainless steel bottom.
WARRANTY: The QE series cabinet warranty is for two
years. It includes parts, labor, and travel during normal
working hours in the Continental United States.
REFRIGERATION SYSTEM: Unitized and located on top of
the cabinet consisting of:
■ Motor-Compressor, high starting torque, hermetic rated
as follows:
❑ 1 Section –
❑ 2 Section –3⁄4 h.p. and rated 6130 BTU at
❑ 3 Section –
■ Condenser fan and fan motor.
■ Heavy duty condenser, copper and aluminum designed
to match motor compressor rating.
■ R-134a Refrigerant and non-CFC polyurethane foam
insulation.
■ Coil fan and fan motor.
■ Removable, insulated coil housing.
■ Evaporator: coated aluminum copper for long life and
corrosion resistance.
■ Temperature control.
■ Refrigeration inside cabinet is by fan circulated air
which is drawn up through vents in the ceiling, passed
through cooling coils, and returned to the cabinet through
Hobart louvered down-duct(s) that provide uniform cooling
throughout the cabinet, regardless of the loading pattern.
Also used in bakery for dough retarding.
1
⁄2 h.p. and rated 3030 BTU at
90°F ambient and 20°F evaporator
temperature.
90°F ambient and 20°F evaporator
temperature.
3
⁄4 h.p. and rated 6340 BTU at
90°F ambient and 20°F evaporator
temperature.
SPECIFICATIONS
CONSTRUCTION: The first letter(s) in each model number
indicates the series and finish.
QES: stainless steel exterior and interior
QESA: stainless steel exterior, DuraFinish aluminum interior
with stainless steel bottom After the series the sections, and
if the unit is a pass-through, will be indicated by the following:
D: Pass-through unit
1: one section
2: two section
3: three section
QES SERIES
■ Exterior: Front housing, ends and doors are No. 4 finish
■ Interior: Liner is crimped construction of No. 4 finish
QESA
■ Exterior: Front housing, ends and doors are No. 4 finish
■ Interior: Liner is crimped construction of DuraFinish
HARDWARE AND FITTINGS: Heavy-duty, bumper-type
door handle positioned horizontally with cylinder locks.
Positive action door hinged mechanism fitted with stops are
chromium plated and are mounted to reveal full door opening
when door is open past 90 degrees. Door stays open at
105 degrees, and self close at less than 90 degrees. Solid
doors are field rehingeable. Door gaskets are of smooth,
high quality vinyl and are easily replaceable without the use
of tools. Exterior, solar powered, digital thermometer is
standard on all cabinets. Inclined exterior stainless steel
heated ramp is provided as standard.
PLUMBING: No plumbing connections are required.
Condensate water automatically evaporated from the top
of the cabinet. Water drains from refrigeration coil to a
corrosion-resistant plastic tray where evaporation is assisted
by the condenser fan and heat from the corrosion-resistant
discharge line.
INSULATION: Two inch, CFC Free Polyurethane foam,
poured, expanded and bonded in place, completely filling all
cavities between interior and exterior surfaces of the cabinet
and doors.
OPTIONS:
❑ Roll-Through
❑ Rear Cladding
❑ Padlock Posts- Field Installed by Others
Mean Daily Energy Consumption (KWHR) tested to
ANSI/ASHRAE 117: QE1=5.50
FOOD EQUIPMENT
stainless steel. Front door frame is extruded thermal
plastic providing an efficient thermal break between
cabinet exterior and interior. Exterior top, back and bottom
are galvanized steel.
stainless steel with
one piece ABS thermoplastic.
stainless steel. Front door frame is extruded thermal
plastic providing an efficient thermal break between
cabinet exterior and interior. Exterior top, back and bottom
are galvanized steel.
aluminum with
finish stainless steel. Door drums are of one piece ABS
thermoplastic.
3
⁄8" radius bends. Door drums are of
3
⁄8" radius bends. Liner bottom is No. 4
Loading...