Hobart DDU38e User Manual
Item # _____________________________________
Quantity ___________________________________
C.S.I. Section 11400
DDU38e DIRECT DRIVE UNLOADER
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
STANDARD FEATURES
■ DESIGN: An accessory for any Hobart CLe
Dishwasher. It is set up to be easily installed in
the eld. The DDU38e adds 38" to the length of
the machine. It includes a table limit switch.
■ CONSTRUCTION: Back, bottom and end
shields of formed 14 gauge stainless steel with
coved corners. Attached to the clean side of the
dishwasher by stainless steel bolts. Unit has a
11⁄2" drain connection and perforated stainless
steel drain cover.
■ CONVEYOR: Center pawl to be connected to
dishwasher conveyor by means of a stainless
steel adjustable rod. As conveyor drives, center
pawl drives racks around 90 degree corner. The
DDU38e is designed to move the racks at the
same speed as the conveyor dishwasher speed.
FOR CLe DISHWASHERS
MODEL
❑ DDU38e – Direct Drive Unloader
Specications, Details and Dimensions on Inside and Back.
DDU38e DIRECT DRIVE UNLOADER FOR CLe DISHWASHERS
F39520 – DDU38e Direct Drive Unloader for CLe Dishwashers Page 1 of 2
DDU38e DIRECT DRIVE UNLOADER
FOR CLe DISHWASHERS
DETAILS AND DIMENSIONS
LEFT TO RIGHT
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
RIGHT TO LEFT
As continued product improvement is a policy of Hobart, specications are subject to change without notice.
Page 2 of 2 F39520 – DDU38e Direct Drive Unloader for CLe Dishwashers
F39520 (REV. 05/13) LITHO IN U.S.A. (H-01)
Loading...