How it Works
Hitachi
Loading...
AX-M76E
Instruction Manual
28 pgs1.67 Mb0

Hitachi AX-M76E Instruction Manual

Download
Page 1
Instruction Manual
AX-M76E
Micro Hi-Fi System
GB
Page 2
Contents
Safety Warnings ....................................................................................................................6
Unpacking .............................................................................................................................8
Control Locations .................................................................................................................9
Installation of Battery ........................................................................................................11
Connections ........................................................................................................................13
Connecting the FM Aerial....................................................................................................................... 13
Connecting Control Cable......................................................................................................................14
ECO-Power/Standby Features ...........................................................................................15
Sound Quality .....................................................................................................................15
Changing the VFD Darkness.................................................................................................................. 15
Listening to Radio Broadcasts ...........................................................................................16
RDS (Radio Data System) Reception .................................................................................17
CD Operation ......................................................................................................................18
MP3 Disc Playing ................................................................................................................20
Use the USB .........................................................................................................................21
Page 3
Setting the Clock Automatically ........................................................................................22
Setting the Clock Manually ................................................................................................22
Setting the Sleep Timer ......................................................................................................22
To conrm the sleep time....................................................................................................................... 22
Setting the Daily on Timer .................................................................................................23
Maintenance .......................................................................................................................24
Troubleshooting .................................................................................................................25
Specications ......................................................................................................................26
Page 4
Used correctly, domestic batteries are a safe and dependable source of portable power. Problems can occur if they are misused or abused – resulting in leakage or, in extreme cases, re or explosion. Here are some simple guidelines to safe battery use designed to eliminate any such problems.
Take care to t your batteries correctly, observing the plus and minus marks on the battery and appliance. Incorrect tting can cause leakage or, in extreme cases, re or even an explosion.
Replace the whole set of batteries at one time, taking care not to mix old and new batteries or batteries of dierent types, since this can result in leakage or, in extreme cases, re or even an explosion.
Remove dead batteries from equipment and all batteries from equipment you know you are not going to use for a long time. Otherwise the batteries may leak and cause damage.
Store unused batteries in their packaging and away from metal objects which may cause a short-circuit resulting in leakage or, in extreme cases, re or even an explosion.
Never dispose of batteries in re as this can cause them to explode. Please recycle dead batteries; do not put with the normal household waste.
Supervise children if they are replacing batteries themselves in order to ensure these guidelines are followed.
Never attempt to recharge ordinary batteries, either in a charger or by applying heat to them. They may leak, cause re or even explode. There are special rechargeable batteries which are clearly marked as such.
Remember that small button cell batteries such as used in some hearing aids, toys, games and other appliances, are easily swallowed by young children and this can be dangerous.
Make sure battery compartments are secure.
Keep loose button cells away from young children.
Seek medical advice if you believe a cell has been swallowed.
SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT
GB
This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.
DO read the operating instructions before you attempt to use the equipment.
DO ensure that all electrical connections (including the mains plug, extension leads
DO consult your dealer if you are ever in doubt about the installation, operation or
DO be careful with glass panels or doors on equipment.
DO route the mains lead so that it is not likely to be walked on, crushed, chafed, or
DON’T remove any xed cover as this may expose dangerous voltages.
DON’T obstruct the ventilation openings of the equipment with items such as
DON’T allow electrical equipment to be exposed to dripping or splashing, or objects
DON’T place hot objects or naked ame sources such as lighted candles or nightlights
DON’T use makeshift stands and NEVER x legs with wood screws - to ensure complete
and inter-connections between the pieces of equipment) are properly made and in accordance with the manufacturer’s instructions. Switch o and withdraw the mains plug before making or changing connections.
safety of your equipment.
subjected to excessive wear and tear or heat.
newspapers, tablecloths, curtains, etc. Overheating will cause damage and shorten the life of the equipment.
lled with liquids, such as vases, to be placed on the equipment.
on, or close to equipment. High temperatures can melt plastic and lead to res.
safety always t the manufacturer’s approved stand or legs with the xings provided according to the instructions.
DON’T use equipment such as personal stereos or radios so that you are distracted from
the requirements of trac safety.
DON’T listen to headphones at high volume, as such use can permanently damage your
hearing.
DON’T leave equipment switched on when it is unattended unless it is specically stated
that is designed for unattended operation or has a stand-by mode. Switch o using the switch on the equipment and make sure that your family knows how to do this. Special arrangements may need to be made for inrm or handicapped people.
DON’T continue to operate the equipment if you are in any doubt about it working
normally, or if it is damaged in any way – switch o, withdraw the mains plug and consult your dealer.
ABOVE ALL
– NEVER let anyone especially children push anything into holes, slots or any other
opening in the case – this could result in a fatal electric shock;
– NEVER guess or take chances with electrical equipment of any kind;
– it is better to be safe than sorry!
4
Page 5
Used correctly, domestic batteries are a safe and dependable source of portable power. Problems can occur if they are misused or abused – resulting in leakage or, in extreme cases, re or explosion. Here are some simple guidelines to safe battery use designed to eliminate any such problems.
Store unused batteries in their packaging and away from metal objects which may cause a short-circuit resulting in leakage or, in extreme cases, re or even an explosion.
Take care to t your batteries correctly, observing the plus and minus marks on the battery and appliance. Incorrect tting can cause leakage or, in extreme cases, re or even an explosion.
Remove dead batteries from equipment and all batteries from equipment you know you are not going to use for a long time. Otherwise the batteries may leak and cause damage.
Replace the whole set of batteries at one time, taking care not to mix old and new batteries or batteries of dierent types, since this can result in leakage or, in extreme cases, re or even an explosion.
Never dispose of batteries in re as this can cause them to explode. Please recycle dead batteries; do not put with the normal household waste.
Never attempt to recharge ordinary batteries, either in a charger or by applying heat to them. They may leak, cause re or even explode. There are special rechargeable batteries which are clearly marked as such.
Keep loose button cells away from young children.
Supervise children if they are replacing batteries themselves in order to ensure these guidelines are followed.
Make sure battery compartments are secure.
Remember that small button cell batteries such as used in some hearing aids, toys, games and other appliances, are easily swallowed by young children and this can be dangerous.
Seek medical advice if you believe a cell has been swallowed.
Page 6
Safety Warnings
GB
• Read all the instructions carefully before using the unit and keep them for future reference.
• Retain the manual. If you pass the unit onto a third party make sure to include this manual.
• Check that the voltage marked on the rating label matches your mains voltage.
Damage
• Please inspect the unit for damage after unpacking.
• Do not continue to operate the unit if you are in any doubt about it working normally, or if it is damaged in any way - switch o, withdraw the mains plug and consult your dealer.
Location of Unit
• The unit must be placed on a at stable surface and should not be subjected to vibrations.
• Do not place the unit on sloped or unstable surfaces as the unit may fall o or tip over.
• The mains socket must be located near the unit and should be easily accessible.
• This unit is designed for indoor domestic use only.
Temperature
• Avoid extreme degrees of temperature, either hot or cold. Place the unit well away from heat sources such as radiators or gas/ electric res.
• Avoid exposure to direct sunlight and other sources of heat.
Naked Flames
• Never place any type of candle or naked ame on the top of or near the unit.
Moisture
• To reduce the risk of re, electric shock or product damage, do not expose this unit to rain, moisture, dripping or splashing. No objects lled with liquids, such as vases, should be placed on the unit.
• If you spill any liquid into the unit, it can cause serious damage. Switch it o at the mains immediately. Withdraw the mains plug and consult your dealer.
Ventilation
• To prevent the risk of electric shock or re hazard due to overheating, ensure that curtains and other materials do not obstruct the ventilation vents.
• Do not install or place this unit in a bookcase, built-in cabinet or in another conned space. Ensure the unit is well ventilated.
Safety
• Always disconnect the unit from the mains supply before connecting/ disconnecting other devices or moving the unit.
• Unplug the unit from the mains socket before a lightning storm.
• In the interests of safety and to avoid unnecessary energy consumption, never leave the unit switched on while unattended for long periods of time, e.g. overnight, while on holiday or while out of the house. Switch it o and disconnect the mains plug from the mains socket.
Mains Cable
• Make sure the unit or the unit stand is not resting on top of the mains cable, as the weight of the unit may damage the cable and create a safety hazard.
Interference
• Do not place the unit on or near appliances which may cause electromagnetic interference. If you do, it may adversely aect the operating performance of the unit, and cause a distorted picture or sound.
Batteries
• Batteries used in the remote control for this unit are easily swallowed by young children and this is dangerous.
• Keep loose batteries away from young children and make sure that the battery holder tray is secure in the remote control. Seek medical advice if you believe a cell has been swallowed.
• Please dispose of batteries correctly by following the guidance in this manual.
• Do not expose the battery to direct sunlight or sources of excessive heat.
6
Page 7
Supervision
GB
• Children should be supervised to ensure that they do not play with the unit and the remote control.
• Never let anyone especially children push anything into the holes, slots or any other openings in the case - this could result in a fatal electric shock.
Class 1 Laser Product
• This unit utilises a laser. Use of controls, adjustments or
CLASS 1
LASER PRODUCT
performance of procedures other than those specied herein may result in hazardous radiation exposure.
• Before moving the unit, ensure the disc tray is empty.
• Always remove the disc when the unit is not in use.
• Failure to do so will risk severely damaging the disc and the unit.
• Do not stack devices, heat from other devices may aect the performance of the unit.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Service
• To reduce the risk of electric shock, do not remove screws. The unit does not contain any user-serviceable parts. Please leave all maintenance work to qualied personnel.
• Do not open any xed covers as this may expose dangerous voltages.
Maintenance
• Ensure the unit is fully unplugged from the power supply before cleaning.
• Do not use any type of abrasive pad or abrasive cleaning solutions as these may damage the unit’s surface.
• Do not use liquids to clean the unit.
The lightning ash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the unit’s enclosure that may be of sucient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the manual accompanying the unit.
7
Page 8
GB
Thank you for purchasing your new HITACHI Micro Hi-Fi System.
We recommend that you spend some time reading this instruction manual so that you fully understand all the operational features it oers. You will also nd some hints and tips to help you resolve any issues.
Read all the safety instructions carefully before use and keep this instruction manual for future reference.
Unpacking
Remove all packaging from the unit. Retain the packaging. If you dispose of it please do so according to local regulations.
The following items are included:
Speakers x 2
Control Cable FM Aerial
Instruction Manual
Remote ControlThe Unit
Speaker Cable x2
8
Page 9
Control Locations
GB
The CD Player
1. Standby
2. USB Port
3. Remote Sensor
4. VFD(Vacuum Fluorescent Display) Display Lens
5. Function
6. Preset Equalizer
7. Volume Control Knob
8. Disc Door
9. Previous/Search Backward Channel Select Backward – PRESET
10. Next/Search Forward Channel Select Forward PRESET +
11. Play/Pause Tuning Backward – TUNING
12. Stop Tuning Forward TUNING +
13. Mode Stereo/MONO Select
14. Open/Close
15. Control Cable Connector
16. Line Output Terminals (L&R)
17. AUX Input Terminals (L&R)
18. FM Aerial Socket
The Amplier
1. Display Lens
2. AC Power Cord
3. Control Cable Connector
4. Left & Right Speaker Output Terminals
9
Page 10
The Remote Control
GB
1. Standby
2. CD Function
3. Tuner Function
4. Random
5. Intro
6. Dimmer DIM
7. Preset Equalizer P-EQ
8. Clock
9. Next Preset +
10. Search Backward Tuning Backward
11. Previous Preset –
12. Play/Pause
13. Album Up ALB +
14. Album Down ALB –
15. Mute
16. Number
17. Open/Close
18. USB Function
19. AUX Function
20. Repeat A-B
21. Mode
22. Loudness
23. Super Bass S-BASS
24. Sleep/Timer
25. CD Display DISPLAY RDS Display
26. Search Forward Tuning Forward
27. Stop
28. Volume Up VOL+
29. Volume Down VOL–
30. Program PROG Memory
10
Page 11
Installation of Battery
GB
1. Unscrew the screw at the back of the remote control.
2. Remove the insulating mylar strip from the battery if the battery is being used for the rst time. It is located at the bottom back side of the remote control.
3. Pull out the battery compartment with your ngernails.
4. Replace a new battery (size 2025) correctly and fully insert the battery compartment back to the original position.
Handling the Remote Control
• Remove the batteries if the remote control is not going to be used for an extended period of time.
• To avoid possible failure, read the following instructions and handle the remote control property.
• Do not drop or cause impact to the remote control.
• Do not spill water or any liquid on the remote control.
• Do not place the remote control on a wet object.
• Do not place the remote control under the direct sunlight or near sources of excessive
heat.
• Do not use caustic cleaners ( porcelain, stainless steel, toilet, or oven cleaner etc. ) on the remote, as it may suer damage.
• Remove the battery from remote control handset when it is not to be used for a long period.
• Otherwise it can be damaged due to leakage of battery.
11
Page 12
GB
Handling the Battery
• Improper or incorrect use of batteries may cause corrosion or battery leakage, which could cause re, personal injury or damage to property.
• Install the battery correctly by following the polarity ( + and – ) indications in the battery compartment.
• When the battery is exhausted, the remote control will not function.
• Only use the battery type indicated in this manual.
• Do not dispose of the used battery as domestic waste. Dispose of it in accordance with
local regulations.
• Small button cell batteries such as the one used in the remote control are easily swallowed by young children, this is dangerous. Keep loose button cells away from young children and make sure that the battery holder tray is secure in the remote control. Seek medical advice if you believe a cell has been swallowed.
Remote Control Operation Range
• The remote control sensor on the front unit is sensitive to the remote control’s commands up to a maximum of 5 metres away and within a maximum of a 60° arc.
• Please note that the operating distance may vary depending on the brightness of the room.
30° 30°
Max. 5 m
12
Page 13
Connections
GB
Make all connections before plugging the system into an AC power outlet.
Connecting the Speakers
Connect the speaker cords between the terminals as shown below.
Connect the cords with black sleeves at the ends and tracer marks to the (-) (G) terminals and cords with red sleeves at the ends and tracer marks to the (+) (L) (R) terminals.
Right Speaker Box
Back View
Left Speaker Box Back View
Connecting the FM Aerial
Connect the FM wire aerial provided to the FM Aerial socket as illustrated below.
1. Connect the FM wire aerial to the FM aerial socket on the rear of the CD player.
2. If reception is poor, connect the unit to an outdoor aerial.
• Before attaching a 75 ohm coaxial lead (the kind with a round wire going to an outside aerial), disconnect the supplied FM wire aerial.
• To avoid noise, keep antennas away from the system, the control cable and the mains cable.
13
Page 14
GB
Connecting Auxiliary Equipment
Connect the AUX INPUT sockets on this unit to the line output sockets on the auxiliary equipment as illustrated below.
The CD player
Auxiliary equipment
Connect the LINE OUT sockets on this unit to the auxiliary input sockets on the auxiliary equipment as illustrated below.
The CD player
Auxiliary equipment
Connecting Control Cable
Connect the control cable between the CD player and the amplier.
The CD player The amplier
Connecting the AC Power Plug
Insert the AC power plug into a wall outlet, and your system is ready to use.
Be sure to unplug the power plug from the outlet when going out or when the system is not in use for an extended period of time.
14
Page 15
ECO-Power/Standby Features
POPS JAZZCLASSICROCKFLAT
GB
This unit features a ECO-Power Standby mode. Press the Standby button to enter standby mode. To save energy consumption, the clock will not be displayed. If you want to display the clock during standby mode, you can press the Clock button. The clock display will disappear after 90 seconds.
If the unit is idle for more than 15 minutes, it will automatically switch to standby mode.
Sound Quality
Adjusting the Volume
To increase or decrease the volume, rotate the volume control knob (– VOLUME +) on the CD player or press the volume up/down buttons (VOL +/–) on the remote control.
Adjusting the super bass
You can reinforce the bass sound to maintain rich, full bass at low volume.
Press the super bass button (S-BASS) on the remote control to get the eect, the “BASS” will display on the VFD. Press the super bass button (S-BASS) again to cancel the eect.
Control the Loudness
This unit has a loudness function, it can automatically increase bass sound eect at low volume (the higher volume, the smaller bass increase). You only need to press the loudness button (LOUDNESS) on the remote control to obtain the loudness function, the “LOUD” will display on the VFD.
Preset Equalizer
You can adjust the sound reproduced by pressing the preset equalizer button (P-EQ) repeatedly. Select from one of the 5 preset equalizer:
Changing the VFD Darkness
To dim or brighten the VFD display, repeatedly press the dimmer button (DIM) on the remote control to the desired brightness.
15
Page 16
GB
Listening to Radio Broadcasts
You can listen to FM stations. Stations can be tuned in manually, automatically, or from preset memory storage.
Before listening to the radio, please check that the FM antenna is correctly connected and adjusted for length and direction or that the unit is connected to an external FM antenna.
Tuning in a Station
1. Repeatedly press the function button (FUNCTION) on the front of the product or press the tuner function button ( ) on the remote control to select tuner function.
2. Select a station using one of the following methods.
• Manual Tuning
Repeatedly press the tuning backward/forward button (– TUNING +) on the front of the product or press the search backward/forward button ( control to change the frequency until you nd the station you want.
• Auto Tuning
/ ) on the remote
If you press and hold the tuning backward/forward button (– TUNING +) on the front of the product or press the search backward/forward button ( control for one second or more, the frequency changes down, or up, automatically until a station is found.
• Preset Tuning (Possible only after presetting stations)
Repeatedly press the channel select backward/forward button (– PRESET +) on the front of the product or press the channel select backward/forward button ( the remote control to select the desired preset number. Its band and frequency are displayed on the VFD.
/ ) on the remote
/ ) on
Presetting Stations
You can preset up to 20 FM stations.
Tune in the desired station:
1. Press the memory button (PROG) on the remote control, the “MEM” will ash on the display and the preset number will be displayed.
2. Press the channel select backward/forward button (– PRESET +) on the front of the product or press the channel select backward/forward button ( control to select the preset number.
– PRESET/ Decreases the preset number by 1
/ ) on the remote
PRESET +/ Increases the preset number by 1
If you selecgt more than 20, the preset number will be changed to “1” automatically.
16
Page 17
3. Press the memory button (PROG) on the remote control to store the station. After 1
GB
second, the display returns to the broadcast frequency display.
4. Repeat above steps 1 to 3 for each station you want to store in memory with a preset number.
If the system is unplugged or if a power failure occurs, the preset stations will not be erased.
To change the FM Reception Mode
When you are tuned into a FM stereo broadcast, “FM ST.” will be displayed and you can hear stereo eects.
If a FM stereo broadcast is hard to receive or noisy, you can select MONO by pressing the mode button (MODE) and the “FM ST” will not displayed. Reception will be improved, but you will lose any stereo eect.
To restore the stereo eect, press the mode button (MODE) and the “FM ST” will be displayed.
RDS (Radio Data System) Reception
Many FM stations are broadcasting added data compatible with RDS. This radio set oers convenient functions using such data.
• PS (Program Service Name)
When an RDS station is received, the “RDS” and the name of that station will be displayed.
When RDS display button (DISPLAY) on the remote control is pressed during PS display, the CT is displayed for 3 seconds, then PS display returns.
• PTY (Program Type)
Program type identication signal. (Example: News, Rock, Classical music.)
• CT (Clock Time System)
The CT system may not properly operate in areas where RDS CT service is not available. Once CT service is received, the CT system keeps operating. “RDS CLOCK” is displayed in areas where no CT services are available.
• Changing Display
During PS display, press the RDS display button (DISPLAY) on the remote control repeatedly to select the CT, PTY or Frequency. They will be displayed for 3 seconds, then the PS display returns.
17
Page 18
GB
CD Operation
CD Playing
1. Repeatedly press the function button (FUNCTION) on the front of the product until “DISC” is displayed or press the CD function button ( ) on the remote control to select tuner function.
2. Press the open/close button ( tray (with the printed side up).
) to open the disc door and place the disc on the disc
3. Press the open/close button ( play it automatically.
If in stop mode, please press the play/pause button ( ) to start playing the disc.
4. Press the play/pause button ( ) to pause the playing, press the button again and it will be continue to play.
5. Press the stop button (
) to stop the disc playing.
) to close the disc door, the unit will read the disc and
To Skip Search or Search and Play
• Press the previous/search backward button ( / ) on the front of the unit or previous button ( ) on the remote control once or more to skip previous one or more tracks of the disc.
Press and hold the previous/search backward button ( search backward button ( ) on the remote control to search for the position that you intend to start playing.
• Press the next/search forward button ( ( ) on the remote control once or more to skip forward one or more tracks of the disc.
/ ) on the front of the unit or next button
/ ) on the front of the unit or
Press and hold the next/search forward button ( search forward button ( intend to start playing.
Program Play
1. Insert a disc and press button when it starts playing.
2. Press the program button (PROG) on the remote control.
3. Press the on the remote control to select the desired track number and press the program button (PROG) to conrm your programme.
4. Repeat above step 3 to nish your programming.
5. Press the
6. Press the
Random play will not shue the programmed music list.
18
/ , / buttons on the front of the product or 0-9, 10+, , buttons
button to start programme play.
button to stop the programme play.
/ ) on the front of the unit or
) on the remote control to search for the position that you
Page 19
Random Play (CD and MP3 discs)
GB
The CD can be played randomly.
Random play begins by pressing the random button (RANDOM) on the remote control in stop mode.
Playing the Beginning (Intro) of each Track
In stop mode, press the intro button (INTRO) on the remote control to play the beginning of each track consecutively. The playing time of each track is 10 seconds.
Press the
button to exit the intro mode.
Playing Repeatedly
• For CD disc, ONE and ALL repeat play can be set by pressing the mode button (MODE) repeatedly.
First press : To repeat the same track over and over again, (“REP” will ash).
Second press : To repeat all tracks on a disc and then play them again and again, (“REP” will stay lit).
Third press : To cancel the repeat playing, (“REP” o ).
• You can use this function to enjoy the certain part of a disc which you like repeating.
When it is playing, press the repeat A-B button (A-B) on the remote control at the beginning of the content that needs repeat playing. Press the repeat A-B button (A-B) again at the end of the content that needs repeat playing. Then the player will repeatedly play between A and B until you press the repeat A-B button (A-B) again to cancel the repeat paragraph the setting and turn to normal playing mode.
A-B repeat function can only be used within the same track.
19
Page 20
MP3 Disc Playing
GB
When selecting tracks the player will automatically display the album and track number. For example: track number 21 may be from album 3, track 7.
1. Press the
2. Press the CD display button (DISPLAY) on the remote control, ID3 information (song title and artist) will be displayed or “NO ID3” if there is no ID3 information. Press this button again, album, track and playing time will be displayed.
3. When playing MP3 discs, the current album and track will be displayed.
4. Press the remote control to select the previous/next track. When pressing the / , / button on the front of the product or , button on the remote control for a few seconds, it will search backward or search forward.
5. Press the album up button (ALB+) or album down button (ALB–) on the remote control to select the next/previous album, and play the rst track of this album.
If playing has ended, press the album up button (ALB+) or album down button (ALB–) on the remote control to select the next/previous album.
Then choose the track with the
button on the remote control.
6. Press the
7. Press the
button to open the disc door and place the MP3 disc on the disc tray.
/ , / button on the front of the product or , button on the
/ , / button on the front of the product or ,
button to start playing the disc.
button to stop playback.
• Play will continue to the nal track when the selected tracks have been played.
• The rst 2 digits of the display is the album number, the next 3 digits is the track number and
the remaining digits display the minutes and seconds.
Playing Repeatedly
For MP3 disc, ONE, ALB and ALL repeat play can be set by pressing the mode button (MODE) repeatedly.
First press : To repeat the same track.
Second press : To repeat ALB (Album).
Third press : To repeat ALL (All albums and tracks).
Fourth press : To cancel the repeat playing.
The word ALB will appear on the display to indicate the albums stored on your MP3 disc.
20
Page 21
Use the USB
GB
By connecting an USB mass storage device (including USB ash memory, USB ash players or memory cards) to this unit, you can enjoy the device’s stored music through the powerful speakers of Hi-Fi system.
1. Insert the USB device’s USB plug into the front of unit.
2. Press the USB button on remote control or press the function select button on the CD player to select the USB function.
3. The device’s stored music will be played automatically.
socket on the
For the devices with USB cables:
1. Insert one plug of the USB cable (not supplied) to the socket on the set.
2. Insert the other plug of the USB cable to the USB output terminal of the USB device.
For the memory card:
1. Insert the memory card into a card reader (not supplied).
2. Use a USB cable (not supplied) to connect the card reader into the set.
socket on the
Playing Repeatedly
For USB, ONE, ALB and ALL repeat play can be set by pressing the mode button (MODE) repeaedly.
First press : To repeat the same track.
Second press : To repeat ALB (Album).
Third press : To repeat ALL (All albums and tracks).
Fourth press : To cancel the repeat playing.
21
Page 22
Setting the Clock Automatically
GB
Tune into a RDS station and wait for a few minutes. To conrm, press the clock button.
Setting the Clock Manually
The built-in clock shows the time on the display.
1. In standby mode, long press the clock button (CLOCK), the VFD will display SET CLOCK and 24HR indicator will blink.
2. Set the 12/24 hour format with the VOL– or VOL+ button.
3. Press the clock button (CLOCK), hour indicator will blink.
4. Set the hour with the VOL– or VOL+ button.
5. Press the clock button (CLOCK), minute indicator will blink.
6. Set the minute with the VOL– or VOL+ button.
7. Press the clock button (CLOCK), the built-in clock starts operating.
• The operating time of every step shouldn’t be longer than 30 seconds or it will return to the time display.
• If there is a power failure or the systems power is turned o, the clock will lose its setting.
Setting the Sleep Timer
Use the sleep timer to turn the system o after a certain number of minutes when in play mode. By setting the sleep timer, you can fall asleep to music and know that your system will turn o by itself rather than play all night.
1. Play a CD or tune in to the desired station.
2. To set the sleep timer press the sleep/timer button (SLEEP/TIMER) on the remote control repeatedly, it changes the number of minutes shown on the display in this sequence:
After setting the number of minutes for the sleep timer, the display will return to the display as before setting the sleep timer.
The system is now set to turn o after the number of minutes you set. The display will show “
zzz ”.
To conrm the sleep time
When the sleep/timer button (SLEEP/TIMER) on the remote control is pressed once, the remaining sleep time is displayed. Wait for a second until the display returns to the original display.
22
Page 23
To cancel the sleep timer setting
GB
Repeatedly press the sleep/timer button (SLEEP/TIMER) on the remote control until the “OFF” is displayed.
Turning o the system also cancels the sleep timer.
Setting the Daily on Timer
You can use the setting timer to make the unit automatically turn on at a certain time everyday from standby. When the setting timer is on, the timer indicator “ ” will be displayed. But the clock must be correctly set for the timer to operate correctly.
1. In standby mode, press the sleep/timer button (SLEEP/TIMER) on the remote control, SET TIMER is displayed on the VFD and the hour indicator will blink.
2. Set the hour with the VOL– or VOL+ button.
3. Press the sleep/timer button (SLEEP/TIMER) on the remote control, minute indicator will blink.
4. Set the minute with the VOL– or VOL+ button.
5. Press the sleep/timer button (SLEEP/TIMER) on the remote control, the selected time is set.
• You can set the daily timer only in standby mode.
• The operating time of every step shouldn’t be longer than 30 seconds or it will return to
the time display.
• Please select the sound source before turning into standby mode. e.g. CD, Radio.
To conrm the daily time
When you press the sleep/timer button (SLEEP/TIMER) on the remote control in standby mode, the daily time is displayed. Wait for a few seconds until the display returns to the time display.
To cancel the daily timer setting
In standby mode, press the sleep/timer button (SLEEP/TIMER) to set the daily timer to o, the timer indicator “ ” will be disappear.
Disconnecting the mains from the unit also cancels the daily timer.
23
Page 24
Maintenance
GB
Cleaning the Unit
Ensure the unit is fully unplugged from the mains socket before cleaning.
• To clean the unit, wipe the case with a slightly moist, lint-free cloth.
• Do not use any cleaning uids containing alcohol, ammonia or abrasives.
• Do not spray an aerosol at or near the unit.
Handling Discs
• Do not touch the playback side of the disc.
• Do not attach paper or tape to the disc.
Playback side
Cleaning Discs
• Fingerprints and dust on the disc cause picture and sound deterioration. Wipe the disc from the centre outwards with a cloth. Always keep the disc clean.
• If you cannot wipe o the dust with a soft cloth, wipe the disc lightly with a slightly moistened cloth and nish with a dry cloth.
• Do not use any type of solvent such as thinner, benzine, commercially available cleaners or antistatic spray. They may damage the disc.
Storing Discs
• Do not store discs in places subjected to direct sunlight or near heat sources.
• Do not store discs in places subjected to moisture and dust such as a bathroom or near
a humidier.
• Storing discs vertically in a case, stacking discs or placing objects on discs outside of their cases may cause warping.
24
Page 25
Troubleshooting
GB
If you are having a problem with your system, check this list for a possible solution before calling for service.
If you cannot solve the problem from the hints given here, or the system has been physically damaged, call a qualied person, such as your dealer, for service.
Symptom Possible Cause Action
No sound is heard • Connections are incorrect, or
loose
Poor radio reception • The antenna is disconnected
• The FM wire antenna is not properly extended and positioned
The CD skips • The CD is dirty or scratched • Clean or replace the CD
The CD does not play • The CD is upside down • Put the CD in with the label
Unable to operate the remote control
Operations are disabled
• The path between the remote control and the sensor on the CD player is blocked
• The batteries have lost their charge
• The built-in microprocessor has malfunctioned due to external electrical interference
• Check all connections and make corrections
• Reconnect the antenna securely
• Extend FM wire antenna to the best reception position
side up
• Remove the obstruction
• Replace the batteries
• Unplug the system then plug
it back in
25
Page 26
GB
Specications
Model AX-M76E
System Specication
Power Requirements AC 230V/50Hz
FM Tuning Range 87.5~108 MHz
Power Consumption 60W (ECO standby <0.5W)
Output Power 45W x 2
THD ≤ 0.7%
Dimensions (CD) 218(W) x 75(H) x 225(D) mm
(Amplier) 218(W) x 80(H) x 215(D) mm
Speaker Specications
Impedance 4Ω
Input Power 50W
Dimensions 161(W) x 250(H) x 220(D) mm
Features and specications are subject to change without prior notice.
26
Page 27
Page 28
Notes for battery disposal
The batteries used with this product contain chemicals that are harmful to the environment. To preserve our environment, dispose of used batteries according to your local laws or regulations. Do not dispose of batteries with normal household waste.
For more information, please contact the local authority or your retailer where you purchased the product.
The above mark is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE).
The mark indicates the requirement NOT to dispose the equipment including any spent or discarded batteries as unsorted municipal waste, but use the return and collection systems available. If the batteries or accumulators included with this equipment display the chemical symbol Hg, Cd or Pb, then it means that the battery has a heavy metal content of more than 0.0005% Mercury, or more than 0.002% Cadmium or more than, 0.004% Lead.
All trademarks are the property of their respective owners and all rights are acknowledged.
Importer: Elkjøp, Solheimsveien 6-8, PB 153, NO 1471 Lørenskog, Norge
Norge: 815 32 000 Sverige: 0771 115 115
Danmark: 70 80 70 70 Suomi: 020321321
Manufacturer: Hitachi Europe Ltd., Whitebrook Park, Lower Cookham Road,
Maidenhead, Berkshire SL6 8YA U.K.
IB-AX-M76E-GB-130802V5
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use