Hilti PS1000R1 User Manual
1
0,
2
0,
3
0,
4
0,
ORIGINAL OPERATING INSTRUCTIONS
PS 1000 x‑scan
It is essential that the operating instructions are read before the tool is operated
for the first time.
Always keep these operating instructions
together with the tool.
Ensure that the operating instructions are
with the tool when it is given to other persons.
Contents Page
1. General information 1
2. Description 2
3. Before use 2
4. Operation 2
5. Settings 5
1. General information
1 These numbers refer to the corresponding illustrations. The illustrations can be found on the fold-out
cover pages. Keep these pages open while studying
the operating instructions.
Scanner 1
@
;
=
%
Buttons 2
&
(
)
+
§
en
Grip
Wheels
Cancel button
Start/stop button
Function buttons
On/off button
Rocker switch
Confirmation button (OK)
Home button
1.1 Explanation of the pictograms and other
information
Symbols
Read the
operating
instructions
before use.
2. Description
2.1 Use
The PS 1000 is used for locating objects embedded
in concrete structures.
2.2 Limitations of use
The tool complies with the requirements of EN
302066-1 and 302067-2.
Prior to planned use of ground or wall penetrating
radar equipment, the user/operator should check that
there are no sensitive radio sites/systems in the near
vicinity (airfields, radio astronomy sites, etc.). These
sites may be generally defined in the licence issued by
the responsible national administration. If these are
present in the area, then liaison with the organization
1
Loading...