Hasselblad PCP 80 User Manual

4 (1)
Hasselblad PCP 80 User Manual

Section12

Projectors

Hasselblad 6x6 . . . . . . . . . . 500-501

Rollei 6x6/35mm . . . . . . . .502-504

Noblux 4x5 . . . . . . . . . . . . . . . . .

504

Mamiya 6x7 . . . . . . . . . . . . . . . . .505

H A S S E L B L A D

P C P 8 0

P R O J E C T O R S

500

The lights dim, an expectant hush falls. The projector springs to life and an image of dazzling quality appears on the screen before a suddenly attentive audience.

When the PCP80 is the projector, you can be assured of a quality presentation that lives up to the Hasselblad name. It is the only projector equipped with the same top-quality Zeiss optics used on Hasselblad cameras. And with projected images this sharp, all the nuances of the original slide will reach the screen — whether the presentation uses one projector or a battery of pro-

jectors run by a professional AV producer switching between panorama displays and animated sequences.

FEATURES

Perspective control:

When a projector is pointed up or down towards a screen, the image may appear distorted. The PCP80's lens moves up and down, like that of a view camera, resulting in a square screen image from a square slide even when the camera is projecting at an angle.

Lens and condenser:

Lenses have their own matched condenser lens, which is replaced whenever a lens is replaced; no light-absorbing heat absorption filter is necessary.

Automatic lamp replacement:

When a projector bulb fails, a reserve bulb immediately clicks into place and a

warning light on the control panel indicates the replacement, unnoticed by the audience, has been made. This can save the day when a bulb fails during an important presentation.

Unparalleled reliability:

The PCP80 has separate, quiet motors for slide change, fan operation and focusing. The cooling system uses pressurized, filtered air to prevent any dust buildup from affecting performance of the mechanism or optic system. Two fuse circuits protect the electronics from power surges and monitors temperature with automatic heat damage turn-off, respectively.

Rotary slide magazine:

The slide tray holds 80 transparencies and can be detached without re-setting.

Control systems:

3 connector inputs for external control systems are available; a standard 6-pin socket, an 8 and 12-pin socket offer lamp control with our without the built-in TRIAC. Connectors for most other professional control systems are available as accessories.

PCP80 Components

Hasselblad PCP80 Projector Body (70101)

With power cord, front protective cover and projector lamp. (Lens and rotary slide magazine must be purchased separately). Can be switched to 110/130 220/240 V 50-60 Hz.

Item # HAPCP80

.............................................................................................................................................................................................2,725.00

Overnight Shipping Available

H A S S E L B L A D

P C P 8 0

PCP80 Components, continued

Zeiss P-Planar 3.5/150mm Projector Lens (70205)

 

Rotary Slide Magazine (70303)

 

Standard lens, supplied with matching condenser lens and front lens

Holds 80 transparencies in 234 x 234˝ (7x7cm) mounts.

 

cap 75/150 (70526).

497.00

Item # HATP .................................................................................

84.95

Item # HA15035P .......................................................................

Zeiss P-Planar 3.5/75mm Projector Lens (70214)

 

Zeiss P-Sonnar 4/250mm Projector Lens (70210)

 

 

 

For short projection distances, especially back projection.

 

For long projection distances. Supplied with matching condenser

Supplied with matching condenser lens and front lens cap 75/150

lens and front lens cap 93-100 (51654).

 

(70526).

 

Item # HA2504P ......................................................................

1,256.00

Item # HA7535P ......................................................................

1,065.00

Remote Cable Control Unit (70507)

For manual slide change and focusing. Cable length: 13 ft. (4m).

Item # HARCP

......................................57.95

Projector Rack, Basic Unit (70517)

For twin projector setups. Weight: 21 lbs. (9.5kg).

Item # HARP

......................................539.95

Supplementary Unit for Projector Rack (70518)

Add-on unit to permit stacking. 13 lbs. (5.9kg).

Item # HASURP

.................................351.95

214 x 214˝ (6x6cm)

Registration Slide Mounts (70511)

Slide mounts with special guide pins to simplify perfect image positioning in Rostrum cameras or in Hasselblad standard multivision programs. Box of 40 mounts.

Item # HASM66P

.................................57.95

214 x 158˝ (6x4.5cm) Registration Slide Mounts (70512)

PCP80 Accessories

Alignment Slide (70520)

For precise adjustment of projectors in a multi-projector set-up.

Item # HAASP

......................................34.95

PCP80 Projector Case (70535)

Sturdy plywood frame with aluminum and steel reinforcements. Foam plastic interior. Holds PCP80 projector body. Dimensions: 20 x 17 x 11˝ (510 x 430 x 285mm) W.D.H. Weight: 18 lbs. (8kg).

Item # HACP

......................................299.95

Front Lens Cap 75/150 (70526)

Protects front lens element of the 75mm P-Distagon and 150mm P-Planar lenses. Replacement.

Item # HALC75P

....................................7.95

Front Lens Cap 250 (51654)

Protects front lens element of the 260mm P-Sonnar lens. Replacement.

Item # HALC250P

................................19.95

PCP80 Dust Cover (70547)

Soft dust cover protects projector when not in use.

Item # HADCP

.....................................44.95

Power Cord (70539)

American plug. Supplied with projector body. Length: 8ft. (2.5m). Replacement.

Item # HAPCP......................................

18.95

Air Filter (70541)

 

Supplied with projector body.

 

Replacement.

 

Item # HAFAP ......................................

19.95

Wiko EHJ Projector Lamp

 

Item # HALEHJ ......................................

8.50

7-Pin AV Connector/

 

Adapter AA (70525)

 

Item # HACAP ...................................

149.95

S R O T C E J O R P

501

Mounts as 70511 above, but with rectangular image format. Box of 40.

Item # HASM645P

...............................57.95

PCP80 Front Protective Cover (70532)

 

Protects projector when no lens is attached. Replacement.

 

Item # HALCP ........................................................................................................................

7.95

 

 

 

PCP80 SPECIFICATIONS

 

 

 

 

 

 

 

TYPE OF PROJECTOR:

 

ILLUMINATION SYSTEM:

 

MAGAZINE:

 

 

 

 

 

 

Slide projector for 214x214˝ (6x6cm) format.

 

Two 24v/250ws halogen lamps (base 6),

 

Rotary; capacity: 80 slides

 

 

 

 

Rotary tray, 80-slide capacity. Remote

 

automatic lamp replacement. Slide

 

DIMENSIONS:

 

 

 

 

controllable

 

temperature approximately 70° c

 

 

 

 

 

 

 

14.3 x 17 x 8˝

 

 

 

SLIDE MOUNTS:

 

COOLING SYSTEM:

 

 

 

 

 

 

(362 x 432 x 204mm) WDH

 

 

 

 

External dimensions 234 x 234˝ (7 x 7cm)

 

Hyperbaric, with filtered air

 

WEIGHT:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Subject to change without notice

 

 

 

 

 

 

31 lbs. (14kg)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

THE PROFESSIONAL’S SOURCE (212) 444-6630 FAX: (212) 239-7770

 

 

 

 

 

 

 

1 • 8 0 0

• 9 4 7 • 6 6 5 0

 

 

 

 

 

 

PHOTO - VIDEO - PRO AUDIO

 

 

 

 

 

 

 

 

 

 

 

 

Loading...
+ 4 hidden pages