JS760BL/DL/EL/SL/FL
GE® 30" Slide-In Electric Convection Range
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
RECEPTACLE LOCATIONS: Locally approved flexible service cord or conduit must be used because terminals are not accessible after range installation. See shaded area in drawing for location of electrical outlet box. Recommended outlet locations allow range to be installed directly against rear wall.
NOTE: This appliance has been approved for 0" spacing to adjacent surfaces above the cooktop. However, a 6" minimum spacing to surfaces less than 15" above the cooktop and adjacent cabinet is recommended to reduce exposure to steam, grease splatter and heat.
INSTALLATION INFORMATION: Before installing, consult installation instructions for current dimensional data and additional requirements
27-1/3"
KW RATING
240V 13.6
208V 10.2
BREAKER SIZE
240V 40 Amps†
208V 40 Amps†
†NOTE: Check local codes for required breaker size.
29-7/8"
36"
+1/2" -1/4"
37-1/4"
*25-7/8"
48-1/4"
|
30" |
|
|
Side Wall |
|
30" min |
|
|
See note A |
|
|
Recommended |
0" |
0" permitted |
Wall-Mounted |
minimum |
|
|
|
|
|
to cabinets |
recommend |
|
below |
6" space to |
|
cooktop |
each side wall |
|
24" |
|
6-1/2" single ovens
7-1/2" double ovens
2-1/2" 36"
2-1/2" |
30" |
|
|
4" single ovens |
|
3" double ovens |
Note A: 30" Minimum to bare cabinet, see |
|
|
|
installation instructions heights less than 30" |
*Depth including door handle is approximately 28-1/4".
ADA
COMPLIANT
For answers to your Monogram, GE Café™ Series, GE Profile™ Series or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000.
All GE Appliances ranges are equipped with an Anti-Tip device. The installation of this device is an important, required step in the installation of the range.
Specification Revised 5/20
Loading...