Garmin GPSMAP 4010, GPSMAP 4208, GPSMAP 4210, GPSMAP 4012, GPSMAP 4212 quick reference guide
Finding a Marine Service and Navigating to It
Marking a Waypoint
To nd a marine service from your current location:
1. From the Home screen, select Where To?.
2. Select the marine service category to which you want to navigate. The chartplotter shows the
list of the 50 nearest locations and the distance and bearing to each.
3. Select the marine service item to which you want to navigate. A screen containing information
about the selected marine service appears.
4. Select Navigate To > Go To. (Or, select Guide To when using a preprogrammed BlueChart g2
Vision card to use Auto Guidance.)
5. Follow the colored line on the screen to the destination.
List of Marine Service Items Go to Destination
Navigating to a Destination on the Chart
To mark your current location as a waypoint:
1. From any screen, press MARK.
2. Select Edit Waypoint to designate a specic name, symbol, water depth, water
temperature, or position.
To create a new waypoint:
1. From the Home screen, select Charts > Navigation Chart.
2. By pressing the ROCKER, use the map pointer ( ) to select the location you want to
designate as a waypoint.
3. Select Create Waypoint.
Navigation Chart Create Waypoint Screen
Editing or Deleting a Waypoint
GPSMAP® 4000 Series
quick reference guide
To navigate to a destination on the chart:
1. From the Home screen, select Charts > Navigation Chart.
2. By pressing the ROCKER, use the map pointer ( ) to select the point on the chart where you
want to go.
3. Select Navigate To.
4. Select Go To to navigate directly to the location, or select Route To to create a specic route
to the location.
5. Follow the colored line on the Navigation Chart to the destination.
Navigation Chart
Follow the Route
To edit a waypoint:
1. From the Home screen, select Information > User Data > Waypoints.
2. Select the waypoint you want to edit.
3. Select Edit Waypoint.
4. Select the waypoint attribute you want to change
(Name, Symbol, Depth, Water Temp, or
Position).
To delete a waypoint:
1. From the Home screen, select Information >
User Data > Waypoints.
2. Select the waypoint you want to delete.
3. Select Delete.
Edit or Delete a Waypoint
Turning the Chartplotter On and Off
Using the Man Overboard Feature
Using the GPSMAP 4000 Series Keypad
To turn the chartplotter on:
1. Press and release the POWER key.
2. When the warning screen appears, press SELECT.
To turn the chartplotter off:
Press and hold the POWER key.
If one chartplotter is connected, it shuts down. If
multiple chartplotters are connected, a prompt asks
if you want to turn off the entire system. Select Yes
to turn off the entire network, or select No to put the
chartplotter in sleep mode.
To mark a Man Overboard location:
1. From any screen, press MARK.
2. Select Man Overboard.
3. Follow the colored line on the screen to the spot
To delete a Man Overboard location:
1. From the Home screen, select Information >
2. Select the Man Overboard location you want to
3. Select Delete.
Adjusting the Backlight and Color Mode
To adjust the backlight level:
1. While the chartplotter is on, press and release the POWER key.
2. Select Backlight.
To allow the chartplotter to automatically adjust the backlight based on ambient light, select
Auto.
To manually adjust the backlight, either
select Up or Down, or use the ROCKER.
To adjust the color mode:
1. Press and release the POWER key.
2. Select Color Mode.
3. Select Day Colors, Night Colors, or Auto.
To access and change screen combinations:
1. From the Home screen, select Combinations >
OR
While viewing a combination screen, press MENU,
2. Select Num Functions to change the number of
3. Select Done.
where the Man Overboard (MOB) feature was
activated.
User Data > Waypoints.
delete.
Man Overboard
Using Combination Screens
Unused Combo (if one is available).
and select Change Combination.
combination screens (1-3). Select Layout to switch
to a horizontal or vertical layout. Select Data Bar
to toggle the data bar on or off. Select a combination screen button to select the screens
to view. (When you select the combination screens to view, you will only be able to select
from the options available to your chartplotter.)
Select the number of
combination screens
Combination
screen 1
Combination
screen 2
Data bar
Change to vertical or
horizontal layout
Toggle the data bar
Change combination
screen 1
Change combination
screen 2
Automatic Backlight Sensor—detects ambient light and allows the
backlight to adjust automatically.
POWER/BACKLIGHT—press and hold to turn the chartplotter on or
off. Press and release to adjust the backlight.
RANGE(+/-)—press up (+) and down (-) to increase and decrease
the map zoom scale.
ROCKER—press up, down, left, and right to move the map pointer
and enter data.
SELECT—press to conrm messages and select items.
MARK—press to mark your current location as a Waypoint.
MENU—press to view additional options on most screens.
HOME—press at any time to return to the Home screen.
Numeric Keypad (4010/4210/4012/4212 only)—enter numbers and
letters into elds instead of using the ROCKER.
Soft Keys—press the Soft Key next to the option you want to view
to select it.
SD Card Slot—insert a BlueChart g2 Vision SD card to access
additional features on your GPSMAP 4000 series chartplotter. Insert
a blank SD card to transfer user data to other GPSMAP 4000/5000
series chartplotters or a PC.
Tips and Shortcuts
Press HOME from any screen to return to the Home screen.
•
Press MENU from any of the main screens to access advanced settings.
•
Press and release the POWER key to adjust the backlight and color mode.
•
WARNING: See the Important Safety and Product Information guide in the product box for
product warnings and other important information.
Please visit www.garmin.com for additional documentation and information.
January 2008 Part Number 190-00779-01 Rev. C Printed in Taiwan
Loading...