Garmin International, Inc.
1200 East 151st Street,
Olathe, Kansas 66062, USA
Tel. (913) 397.8200 or (800)
800.1020
Fax (913) 397.8282
All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied,
transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express
prior written consent of Garmin. Garmin hereby grants permission to download a single copy of this manual
onto a hard drive or other electronic storage medium to be viewed and to print one copy of this manual or of any
revision hereto, provided that such electronic or printed copy of this manual must contain the complete text of
this copyright notice and provided further that any unauthorized commercial distribution of this manual or any
revision hereto is strictly prohibited.
Information in this document is subject to change without notice. Garmin reserves the right to change or improve
its products and to make changes in the content without obligation to notify any person or organization of such
changes or improvements. Visit the Garmin Web site (www.garmin.com) for current updates and supplemental
information concerning the use and operation of this and other Garmin products.
Garmin® and nüvi® are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries.
Garmin Lock™ is a trademark of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the
express permission of Garmin. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc., and
any use of such name by Garmin is under license. MSN and the MSN logo are trademarks of the Microsoft group
of companies
Garmin (Europe) Ltd.
Liberty House
Hounsdown Business Park,
Southampton, Hampshire, SO40
9RB UK
Tel. +44 (0) 870.8501241 (outside
the UK)
0808 2380000 (within the UK)
Fax +44 (0) 870.8501251
April 2008 Part Number 190-00847-02 Rev. B Printed in Taiwan
Your nüvi Unit
See the Important Safety and Product Information guide in the product box for product warnings and other important
information.
Power key:
Battery cover
GPS antenna
slide to the left to turn the unit on/off;
slide to the right to lock the screen
Headphone/
audio out
jack
Microphone
new
MicroSD
card slot
3
Mini-USB
connector
Speakers
Microphone
WARNING: This product contains a lithium-ion battery. To prevent damage, remove the unit from the vehicle or store it out
of direct sunlight.
Check local trafc laws before mounting. Currently, some state laws prohibit drivers from using suction mounts or other
devices on their windshields that could obstruct the driver’s vision while operating motor vehicles. Other Garmin dashboard
or friction mounting options should be used.
Serial number
under battery
External
antenna
connector
Step 1: Install the Battery
Cradle
Power
cable
Cradle
Power
cable
Suction cup
mount
Suction cup
mount
1. Locate the rectangular lithium-ion battery
that came in the product box.
2. Slide the battery cover off the back of the
nüvi.
3. Locate the metal contacts on the end of
the lithium-ion battery.
4. Insert the battery so the metal contacts
on the battery match up with the metal
contacts inside the battery compartment.
5. Press the battery down into place.
6. Slide the battery cover back on until it
clicks into place.
Ways to Charge Your nüvi
Use the vehicle power cable.
•
Use the USB cable.
•
Use an AC adapter cable (optional
•
accessory).
Step 2: Mount the nüvi
1. Plug the
vehicle power
cable into the
power
connector on
the right side
of the cradle.
2. Snap the cradle
onto the suction
cup arm.
3. Clean and dry
your windshield
and the suction
cup with a lint-free cloth. Remove the
clear plastic from the suction cup. Place
the suction cup on the windshield.
4. Flip the lever back,
toward the windshield.
5. Fit the bottom of your
nüvi into the cradle.
6. Tilt the nüvi back until it
snaps into place.
7. Plug the other end of the vehicle power
cable into a power outlet in your vehicle.
Your unit should turn on automatically if it
is plugged in and the vehicle is running.
4
Step 3: Assemble and
Arrow on
battery cover
Battery cover
Arrow on
outer edge of
remote
Battery
Arrow on
battery cover
Battery cover
Arrow on
outer edge of
remote
Battery
Mount the Speech
Recognition Remote
Control
1. Insert the round lithium coin CR2032
battery into the remote control with the
positive side facing up.
2. Align the
arrow on the
battery cover
with the arrow
on the outer
edge of the
remote.
3. Use a coin to
twist the cover
clockwise until closed.
Mount the remote control in a convenient
location in your vehicle, such as on your
steering wheel. Use the strap to secure the
remote control in place.
5
Step 4: Congure the nüvi
To turn on your nüvi, slide the Power
key to the left and let go after one second.
Follow the on-screen instructions.
Step 5: Acquire Satellites
Go outdoors to an open area, out of garages,
and away from tall buildings. Stop your
vehicle, and turn on the nüvi. Acquiring
satellite signals may take a few minutes.
The bars indicate GPS satellite
strength. When one bar is green, the nüvi
has acquired satellite signals. Now you can
select a destination and navigate to it. For
more information about GPS, visit
www.garmin.com/aboutGPS.
Loading...
+ 11 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.