FUJIFILM Saber V-6e, Luxel V-6e CTP User Manual

SA B ER V-6E

affordability, r el ia bi li ty a nd t he q ua li ty r equired to meet the denand of the mid-size printer.

Saber V-6e

Luxel V- 6 e CTP

Semi-automatic conﬁ guration shown.

INTERNAL DR UM

4-page entry level Violet CTP platesetter.

The Fujifilm Violet Saber Series of Violet platesetters is transforming today’s prepress industry.

The Saber V-6e is the series’ newest addition – affordable, reliable and high quality 4-page CTP

platesetter designed specifically for the 4-up and mid-size printer, both now and well into the

future. Designed and optimized for Fujifilm Brillia LP-NV photopolymer plates, Saber V-6e features

the highest level imaging, repeatability and accuacy in an affordable, reliable solution. Flexible

and upgradeable, the Saber V-6e can keep up with your customers’ production requirements.

A composite internal drum and Fujifilm’s single custom-built violet laser assembly (featuring

a life of over 5,000 imaging hours) give you the highly-accurate image quality you’ve come

to expect from Fujifilm. Violet photopolymer CTP plates are easily handled in a bright yellow

safelight environment. Configurations include:

Manual – Manual plate feed and removal

Semi-Automatic – Manual plate feed, automatic processing

Saber V-6e Features:

• Affordable entry level 4-page Violet CTP system

• Extremely reliable addition to the Fujiﬁ lm Violet Saber Series

• The same high quality you’ve come to expect from the Fujiﬁ lm Violet Saber Series

• Violet laser technology provides a lower cost of ownership and long laser life

• Small footprint

• Upgradeability – manual to semi-automatic

• Productivity options – The Saber V-6e can grow as your business grows

• The ultra-ﬂ exible Fujiﬁ lm LP-NV plate for run lengths up to 500,000 with UV curing

• Fujiﬁ lm Co-Res Screening for enhanced image quality and improved productivity

Fujiﬁ lm Graphic Systems USA Phone: 800.877.0555 • Email: contact@fujifilmgs.com • Web: www.fujifilmgs.com

LOW COST OF OWNERSHIP

1580 mm (62.2 in)

5306 mm (208.9 in)

V-6E SEMI-AUTOMATIC

MEDIA

LOAD AREA

ENGINE PROCESSOR

STACKER

V-6E MANUAL

1000 mm

(39.4 in)

MEDIA

LOAD AREA

ENGINE

1580 mm (62.2 in)

1070 mm

(42.1 in)

Affordability is no longer a trade-off against quality. Saber V-6e has

a composite drum that, coupled with Fujiﬁ lm’s custom built laser

assembly results in highly accurate images and the highest quality

output.

Fujiﬁ lm’s laser assembly features a life of over 5,000 imaging

hours – that’s ﬁ ve years of typical use – giving large cost savings

compared with multiple laser arrays used in thermal devices. These

savings are not only on the initial purchase price, but also long

term servicing, laser replacement and daily operating costs are

dramatically reduced as well.

A guiding principle in the design of the Violet Saber Series is simplicity. Manufacturing standards

are the highest, to ensure that Violet Saber platesetters keep working reliably and predictably,

plate after plate. By designing down the number of parts, system stability is enhanced.

SABER V-6e ENGINE

Using the same award-winning optics technology from the Violet Saber series, the Saber V-6e

system produces the high quality results you would expect from Fujiﬁ lm. Powered by its

dedicated single-laser assembly coupled to a high-speed spinner, the Saber V-6e is capable

of producing up to 10, 4-page plates per hour at 2400dpi and 12 plates per hour at 1200dpi.

Saber V-6e

Luxel V- 6 e CTP

VIOLET –THE FUTURE OF CTP

Violet technology has strengthened with more platesetters

now using the low-cost, low-power diodes than ever before.

Newspaper and 4-page markets in particular are dominated with Violet

laser devices due to their leading productivity, high quality and low cost of ownership.

SP E CIFICATI O NS:

MEDIA SUPPLY Semi-Automatic and Manual Conﬁ guration

• Single plate feed

• No interleaf removal

IMAGING

• Patented, 60mw Violet laser technology

• High speed spinner control

• Semi-conductor laser @ 405nm

• Standard resolutions 1200 & 2400 dpi

USER INTERFACE

• PC-based user interface only

RIP / WORKFLOW SUPPORT

• Choice of RIPs

• Celebrant Gateway (supplied)

• Rampage

• Output Director

UPGRADE OPTIONS

• Manual to Semi-Automatic

• V-6e High speed upgrade (15 pph)

• V-6e to V-6 upgrade (20 pph)

RIP / RECORDING INTERFACE

• Firewire (IEEE 1394)

IMAGE QUALITY

• Class leading image quality

• Fujiﬁ lm Quality Screening

• 50 to 200 lpi screen rulings

• Adobe Accurate Screening

• Co-Res Screening

MEDIA TYPE

• Fujiﬁ lm Brillia LP-NV photopolymer Violet aluminum plate

• 6, 8 and 12 gauge

ENVIRONMENT

• 69˚F – 77˚F

• 55% ± 5% relative humidity (non-condensing)

POWER REQUIREMENTS

• Single phase 230 ± 10% VAC 16AMP, 47 – 63 Hz

• Heat output – 7846 BTU/hour

WEIGHT

• Weight – 1,984 lbs. (excluding processor) RESOLUTION / PLATES/HR

• 1200 dpi – 12 plates/hour

• 1219 dpi – 12 plates/hour

• 1270 dpi – 12 plates/hour

• 2400 dpi – 10 plates/hour

• 2438 dpi – 10 plates/hour

• 2540 dpi – 10 plates/hour

• 3600 dpi – 8 plates/hour

• 3657 dpi – 8 plates/hour

OPTIONAL RESOLUTIONS

• 1219 / 2438*

• 1270 / 2540*

• 3600

• 3657

*Available as set

So where is the future now for Violet diodes, and how will they impact the CTP market?

Violet diode lasers are being constantly driven by the demand of the consumer DVD market.

Ever growing DVD writer sales are pushing for yet higher powered lasers to enable more

data to be burnt to media, while still maintaining low costs. Dramatic announcements in the

development path for Violet diodes are now clear, and as the 5mw diodes moved to 30mw, we

are now seeing 60mw and 100mw with 200 mw expected in the next few years.

Violet imaging technology takes the

next major leap into the next generation

of Violet imaging. The announcement

of Fujiﬁ lm’s chemical free violet plate,

clearly positions Fujiﬁ lm’s Violet CTP

as a world class system and reinforces

Fujiﬁ lm Graphic Systems USA Phone: 800.877.0555 • Email: contact@fujifilmgs.com • Web: www.fujifilmgs.com

Violet as a leading class CTP solution.

Gauge Max / Min Saber V-6e (mm) Saber V-6e (in)

LANDS CAPE

6 Maximum 525 x 459 2021/32” x 181/16”

6 Minimum 320 x 2 90 1219/32” x 1113/32”

8 Maximum 765 x 686 303/32” x 27”

8 Minimum 320 x 2 90 1219/32” x 1113/32”

12 Maximum 765 x 686 303/32” x 27”

12 Minimum 410 x 3 50 165/32” x 1325/32”

PORTRAIT

6 Maximum 459 x 459 181/16” x 181/16”

6 Minimum 279 x 3 81 1031/32” x 15”

8 Maximum 500 x 686 1921/32” x 27”

8 Minimum 279 x 3 81 1031/32” x 15”

12 Maximum 500 x 686 1921/32” x 27”

12 Minimum 350 x 4 80 1 325/32” x 1829/32”

•

Lead or plate width is shown first, where width is d efined as the slow scan direction,

or along the drum, and height is the fast scan, or around the drum.

•

Image area 4mm (

") les s plate size .

saberV6e_06_1

+ 1 hidden pages