INSTALLATION INSTRUCTIONS
ARCHITECTURAL GRILLE MODEL AG
These instructions cover the installation on an Architectural Grille, Model AG, into a WSC model solid-side sleeve. The Architectural Grille must be installed just prior to the installation of the air conditioner chassis.
The contents of the package are:
1.AG Architectural Grille
2.Brackets, 2 each
3.Fiber strap
4.Screws (10 each)
5.Instructions
Tools required for installation: A fl at-blade screwdriver or 1/4" hex. nut driver.
STEP 1. WSC sleeve should have been installed as specifi ed in the Sleeve Installation Instructions. Remove the front closure panel, louvered metal grille and back weather panel in the sleeve. Should the air conditioner grille using proper procedures.
STEP 2. Install the |
1 below to identify |
the correct |
sleeve, towards the |
back, so that |
ange (same holes |
used to mount |
provided. Repeat the |
procedure to |
|
FIGURE 1
617-408-01 (7-05)