Prima di leggere aprire le due pagine con le immagini e prendere confidenza con le diverse funzioni
dell'apparecchio.
Antes de começar a ler abra as duas páginas com as imagens e, de seguida, familiarize-se com todas as
funções do aparelho.
Before reading, unfold both pages containing illustrations and familiarise yourself with all functions of the
device.
Klappen Sie vor dem Lesen die beiden Seiten mit den Abbildungen aus und machen Sie sich anschließend
mit allen Funktionen des Gerätes vertraut.
IT / MT Traduzione delle istruzioni d’uso originali Pagina 1
PT Tradução do manual de instruções original Página 13
GB / MT Translation of the original instructions Page 25
DE / AT / CH Originalbetriebsanleitung Seite 35
Traduzione della dichiarazione di conformità originale .................11
FAAS 12 B2
IT│MT
│
1 ■
SEGHETTO RICARICABILE PER
POTATURA FAAS 12 B2
Introduzione
Ci congratuliamo per l'acquisto del vostro nuovo
apparecchio. È stato scelto un prodotto di alta
qualità. Il manuale di istruzioni è parte integrante
del presente prodotto. Esso contiene importanti
indicazioni per la sicurezza, l'uso e lo smaltimento.
Prima di utilizzare il prodotto, familiarizzare con
tutte le indicazioni relative ai comandi e alla sicurezza. Utilizzare il prodotto solo come descritto e
per i campi d'impiego indicati. In caso di cessione
del prodotto a terze persone, consegnare anche
tutta la relativa documentazione.
Uso conforme
L'apparecchio, definito seghetto alternativo, è concepito con una battuta fissa (piastra di base) per il
taglio di legno, plastica e materiali di costruzione.
L'apparecchio è idoneo per interventi di saldatura
grossolani, tagli diritti e curvi e taglia a filo le
superfici. Il montaggio della staffa di sostegno
consente all'apparecchio di segare perfettamente
i rami. Osservare le informazioni sulle lame e le
istruzioni operative per il taglio. Qualunque altro
impiego o modifica della macchina è da considerarsi non conforme alla destinazione d'uso prevista
e può comportare gravi rischi di infortunio. Il
produttore non si assume alcuna responsabilità per
i danni derivanti da uso non conforme. L'apparecchio non è destinato all'uso commerciale.
Dotazione
Blocco di accensione
Impugnatura
Pacco batteria
Sblocco (pacco batteria)
Interruttore ON/OFF
Lama di taglio (SWISS MADE)
Piastra di base
Mandrino ad attacco rapido
Guanto
Sblocco (staffa di sostegno)
Staffa di sostegno
Caricabatteria rapido
LED di controllo (verde)
LED di controllo (rosso)
Indicatore dello stato della batteria
Volume della fornitura
1 seghetto ricaricabile per potatura FAAS 12 B2
1 caricabatterie rapido FAAS 12 B2-2
1 pacco batteria FAAS 12 B2-1
1 staffa di sostegno
1 lama per legno 152 mm / TPI 6 (SWISS MADE)
1 valigetta
1 manuale di istruzioni per l'uso
Dati tecnici
Gattuccio a batteria: FAAS 12 B2
Tensione nominale: 12 V
Numero di giri
nominale in folle: n
Lunghezza corsa: 20 mm
Max. Potenza di taglio: legno 80 mm
Pacco batteria: FAAS 12 B2-1
Tipo: IONI DI LITIO
Tensione nominale: 12 V
Capacità: 2000 mAh
Caricabatterie rapido: FAAS 12 B2-2
INGRESSO / Input:
Corrente nominale: 230 - 240 V ~, 50 Hz
Potenza assorbita nominale: 38 W
USCITA / Output:
Tensione nominale: 12,6 V
Corrente nominale: 2400 mA
Tempo di carica: circa 60 min
Fusibile (interno): 2 A
Classe di protezione: II / (isolamento doppio)
(corrente
continua)
0–2700 min
0
(corrente continua)
(corrente alternata)
(corrente continua)
T2A
-1
■ 2 │ IT
│
MT
FAAS 12 B2
Valori di emissione acustica:
Valore di misurazione dei rumori determinato
secondo ENISO 4871. Valori tipici del livello di
rumore ponderato A dell'elettroutensile nel luogo
dell'utilizzo:
Livello di pressione acustica: L
Fattore di convergenza: K
= 82 dB (A)
pA
= 3 dB
pA
Livello di potenza acustica: LWA = 93 dB (A)
Fattore di convergenza: K
= 3 dB
WA
Indossare paraorecchi acustici!
Valori totali di vibrazione (somma dei vettori di tre
direzioni) rilevati ai sensi della norma EN60745:
Taglio di pannelli di truciolato: a
h,B
Fattore di convergenza K = 1,5 m/s
Taglio di travi di legno: a
h,WB
Fattore di convergenza K = 1,5 m/s
= 6,37 m/s
2
= 9,26 m/s
2
2
NOTA
►
Il livello di vibrazioni indicato nelle presenti
istruzioni è stato misurato secondo un procedimento di misurazione conforme alla norma
e può essere usato per un confronto tra vari
apparecchi. Il coefficiente di emissione delle
vibrazioni può anche essere usato per una
stima introduttiva dell'esposizione.
ATTENZIONE!
► Il livello di vibrazioni cambia in base all'uso
dell'elettroutensile e in alcuni casi può essere
superiore al valore indicato nelle presenti
istruzioni. La sollecitazione da vibrazioni
potrebbe risultare sottostimata se l'elettroutensile viene utilizzato regolarmente in tal
modo. Cercare di ridurre il più possibile la
sollecitazione da vibrazioni. Provvedimenti
adeguati per la riduzione della sollecitazione
da vibrazioni sono l'uso di guanti nell'utilizzo
dell'elettroutensile e la limitazione della durata d'impiego. Occorre tenere in considerazione tutte le componenti del ciclo di esercizio
(per esempio i tempi nei quali l'elettroutensile
è spento e i tempi in cui è acceso ma funziona senza subire carichi).
Indicazioni generali
relative alla sicurezza
per elettroutensili
ATTENZIONE!
► Leggere tutte le indicazioni relative alla sicu-
rezza e le istruzioni. L'errata applicazione
delle indicazioni relative alla sicurezza e
delle istruzioni può causare scosse elettriche,
incendi e / o gravi lesioni.
Conservare le indicazioni relative alla
2
sicurezza e le istruzioni per il futuro.
Il termine "elettroutensile" utilizzato nelle indicazioni
relative alla sicurezza si riferisce a elettroutensili
collegabili alla rete elettrica (con cavo di rete) e a
elettroutensili a batteria (senza cavo di rete).
1. Sicurezza sul posto di lavoro
a) Mantenere l'area di lavoro pulita e ben
illuminata. Il disordine e la scarsa illuminazione
dell'area di lavoro potrebbero dare luogo a
infortuni.
b) Non lavorare con elettroutensili in ambienti
a rischio di esplosione, in cui siano presenti
liquidi, gas o polveri infiammabili. Gli elettro-
utensili generano scintille che possono incendiare
la polvere o i vapori.
c) Tenere lontani i bambini e altre persone
durante l'uso dell'elettroutensile. In caso di
distrazione, si potrebbe perdere il controllo
dell'apparecchio.
2. Sicurezza elettrica
a) La spina dell'elettroutensile deve essere
idonea all'inserimento nella presa. La spina
non deve essere assolutamente modificata.
Non utilizzare connettori adattatori con
elettroutensili collegati a terra. Le spine non
modificate e le prese idonee riducono il rischio
di scosse elettriche.
FAAS 12 B2
IT│MT
│
3 ■
b) Evitare il contatto corporeo con superfici col-
legate a terra, come tubi, termosifoni, stufe e
frigoriferi. Quando il corpo è a diretto contatto
con la terra sussiste un maggiore pericolo di
scosse elettriche.
c) Tenere gli elettroutensili lontano dalla piog-
gia o dall'umidità. La penetrazione di acqua
in un apparecchio elettrico aumenta il rischio di
scosse elettriche.
d) Non utilizzare il cavo elettrico per scopi non
conformi, come ad es. per trasportare l'elettroutensile, per appenderlo o per scollegare la
spina dalla presa. Tenere il cavo lontano dal
calore, dall'olio, da angoli acuminati o da
parti dell'apparecchio in movimento. Cavi
danneggiati o aggrovigliati aumentano il
rischio di scosse elettriche.
e) Se si lavora all'aperto con un elettroutensile,
utilizzare solo una prolunga omologata anche per uso esterno. L'utilizzo di una prolunga
idonea all'uso esterno riduce il rischio di scosse
elettriche.
f) Se è inevitabile l'uso dell'elettroutensile in
un ambiente umido, utilizzare un circuito di
sicurezza per correnti di guasto. L'uso di un
circuito di sicurezza per correnti di guasto evita
il rischio di scosse elettriche.
3. Sicurezza delle persone
a) Prestare sempre attenzione controllando le
operazioni in corso e procedere con cura
quando si lavora con un elettroutensile. Non
utilizzare l'elettroutensile se si è malati o stanchi o se sono state assunte sostanze come
droghe, alcol o farmaci. Un solo momento di
disattenzione nell'uso dell'elettroutensile può
dare luogo a gravi lesioni.
b) Indossare dispositivi di protezione individuale
e sempre occhiali di protezione. L'uso di un
dispositivo di protezione individuale come mascherina antipolvere, scarpe antiscivolo, casco
protettivo o paraorecchi acustici, a seconda
dell'uso e dell'impiego dell'elettroutensile, riduce
il rischio di lesioni.
c) Evitare l'accensione involontaria. Accertarsi
che l'elettroutensile sia spento prima di
collegarlo all'alimentazione e/o alla batteria,
sollevarlo o movimentarlo.
Se si tiene il dito sull'interruttore mentre si sposta
l'elettroutensile o si collega l'apparecchio alla
rete elettrica con l'interruttore su ON, si possono verificare infortuni.
d) Rimuovere gli utensili di regolazione o le
chiavi per dadi prima di accendere l'elettroutensile. Un utensile o una chiave lasciati in
una parte rotante dell'apparecchio possono
provocare lesioni.
e) Evitare posture innaturali. Provvedere a
una posizione sicura e mantenere sempre
l'equilibrio. In tal modo si può controllare
meglio l'elettroutensile, soprattutto in situazioni
impreviste.
f) Indossare un abbigliamento idoneo. Non
indossare abiti ampi o gioielli. Tenere lontani
i capelli, gli abiti e i guanti dalle parti in
movimento. Gli abiti ampi e pendenti, i gioielli
o i capelli lunghi possono impigliarsi nelle parti
mobili.
g) Se è possibile montare aspiratori per polvere
e trucioli, accertarsi che siano collegati e
vengano utilizzati correttamente. L'uso di un
aspiratore per polvere può ridurre i pericoli
associati alla polvere.
4. Uso e manipolazione dell'elettroutensile
a) Non sovraccaricare l'apparecchio. Utilizzare
l'elettroutensile idoneo al proprio lavoro. Con
l'elettroutensile adatto si lavora meglio e con
maggiore sicurezza nell'intervallo di potenza
indicato.
b) Non utilizzare elettroutensili con interruttore
difettoso.Un elettroutensile che non può più
essere acceso o spento è pericoloso e deve
essere riparato.
c) Staccare la spina dalla presa di corrente
e/o rimuovere la batteria prima di eseguire
impostazioni dell'apparecchio, sostituire gli
accessori o riporre l'apparecchio. Questa
fuori della portata dei bambini. Non consentire
l'uso dell'apparecchio a persone inesperte o
che non hanno letto le presenti istruzioni.
■ 4 │ IT
│
MT
FAAS 12 B2
Gli elettroutensili sono pericolosi se utilizzati da
persone inesperte.
e) Trattare gli elettroutensili con cura. Controllare
che le parti mobili dell'apparecchio funzionino perfettamente e non si inceppino e che
non vi siano elementi rotti o danneggiati al
punto da compromettere la funzione dell'elettroutensile. Fare riparare le parti danneggiate prima di utilizzare l'apparecchio. Molti
infortuni derivano da una cattiva manutenzione
degli elettroutensili.
f) Mantenere gli utensili da taglio ben affilati e
puliti. Gli utensili da taglio trattati con cura e
con angoli di taglio affilati si inceppano meno
spesso e sono più facili da controllare.
ecc. conformi a queste istruzioni. Tenere conto
delle condizioni di lavoro e dell'attività da
eseguire. L'uso di elettroutensili per applicazioni
diverse da quelle previste può dare luogo a
situazioni di pericolo.
5. Uso e manipolazione dell’utensile
a batteria
a) Caricare le batterie solo con i caricabatterie
che vengono consigliati dal costruttore. Se un
caricabatterie adatto a un determinato tipo di
batteria viene utilizzato con batterie diverse, vi
è pericolo di incendio.
b) Utilizzare solo le batterie appositamente
previste per gli elettroutensili. L’utilizzo di
altre batterie può causare lesioni e pericoli di
incendio.
c) Tenere la batteria non utilizzata lontano
da graffette, monete, chiavi, chiodi, viti o
altra minuteria in metallo, poiché tali oggetti
potrebbero provocare un cortocircuito fra
i contatti. Un cortocircuito fra i contatti della
batteria può dare luogo a ustioni o incendio.
d) In caso di utilizzo scorretto, potrebbe
fuoriuscire del liquido dalla batteria. Evitare
il contatto con questo liquido. In caso di
contatto accidentale, sciacquare con acqua.
Se il liquido entra a contatto con gli occhi,
consultare un medico. Il liquido che fuoriesce
dalla batteria potrebbe provocare irritazioni
cutanee o ustioni.
ATTENZIONE! PERICOLO DI ESPLO-
SIONE! Non caricare mai batterie
non ricaricabili.
Proteggere la batteria dal calore, per
es. es. anche da irradiazione solare
permanente, fuoco, acqua e umidità.
Sussiste pericolo di esplosione.
6. Assistenza
a) Fare riparare l’elettroutensile solo da per-
sonale qualificato specializzato e solo con
ricambi originali. In tal modo si garantisce la
sicurezza dell’elettroutensile.
Indicazioni relative alla sicurezza
specifiche per i seghetti alternativi
■ Afferrare sempre l’elettroutensile dal manico
isolato quando si eseguono lavori nei quali
l’elettroutensile potrebbe urtare cavi elettrici
nascosti o il proprio cavo di alimentazione.
Il contatto con una linea che conduce tensione
potrebbe mettere sotto tensione anche le parti
dell’apparecchio di metallo e provocare così
una scossa elettrica.
■ Indossare una mascherina antipolvere.
FAAS 12 B2
IT│MT
│
5 ■
Indicazioni relative alla sicurezza per caricabatterie
■ Questo apparecchio può essere
utilizzato dai bambini di almeno
8anni di età e da persone con
capacità fisiche, sensoriali o mentali
ridotte o insufficiente esperienza o
conoscenza, solo se sorvegliati o
istruiti sull'uso sicuro dell'apparecchio e qualora ne abbiano compreso i pericoli associati. I bambini non
devono giocare con l'apparecchio.
La pulizia e la manutenzione a
cura dell'utente non devono essere
eseguite da bambini, a meno che
non siano sorvegliati.
Il caricabatterie è indicato solo
per l'uso in ambienti interni.
■ In caso di danni al cavo di collega-
mento dell'apparecchio, farlo sostituire dal produttore, dal servizio
di assistenza clienti o da personale
altrettanto qualificato per evitare
pericoli.
Istruzioni operative per il taglio
■ Verificare la presenza di corpi esterni sul materiale
da lavorare quali chiodi, viti ecc. e rimuoverli.
■ Se la lama si blocca spegnere immediatamente
l'apparecchio. Allargare la fessura già tagliata
con un attrezzo idoneo ed estrarre il seghetto
alternativo.
■ Tagliare il materiale con un avanzamento
uniforme.
Accessori / apparecchi addizionali
originali
■ Utilizzare solo accessori e apparecchi addi-
zionali indicati nel manuale di istruzioni.
L'uso di apparecchi o accessori diversi da quelli
indicati nel manuale di istruzioni può comportare il pericolo di lesioni.
Informazioni sulle lame
È possibile utilizzare qualsiasi altra lama, purché
sia provvista del supporto adeguato, gambo
universale da ½“ (12,7 mm). Per ogni impiego del
seghetto alternativo, sono reperibili in commercio
lame ottimizzate di diverse lunghezze.
NOTA
TPI = teeth per inch = numero di denti ogni
►
2,54 cm
■ 6 │ IT
│
MT
FAAS 12 B2
Prima della messa in funzione
Carica del pacco batteria
ATTENZIONE!
► Staccare sempre la spina dalla presa prima
di rimuovere o inserire il pacco batteria
dal o nel caricabatterie rapido .
■ Non caricare il pacco batteria se la tempe-
ratura ambiente è al di sotto di 10 °C o al di
sopra di 40 °C.
♦ Inserire il pacco batteria nel caricabatteria
rapido
♦ Inserire la spina nella presa Il LED di controllo
rosso si accende.
♦ Il LED di controllo verde segnala che il pro-
cedimento di carica è concluso e che il pacco
batteria è pronto per l'uso.
♦ Introdurre il pacco batteria nell'apparecchio.
♦ Tra un processo di carica e l'altro spegnere il
caricabatterie rapido per almeno 15 minuti
scollegando la spina dalla presa di corrente.
.
Inserimento / rimozione del pacco
batteria dall'apparecchio
Inserire il pacco batteria:
♦ Fare in modo che il pacco batteria si innesti
in posizione nell'impugnatura
Rimozione del pacco batteria:
♦ Premere il tasto per lo sbloccaggio e prele-
vare il pacco batteria
.
.
Controllo della carica della batteria
♦ Per verificare le condizioni della batteria preme-
re l’interruttore
Lo stato o la carica residua vengono visualizzati
sull'indicatore di stato della batteria
♦ ROSSO / ARANCIONE / VERDE = potenza /
carica massima
ROSSO / ARANCIONE = potenza /
carica media
ROSSO = carica debole – caricare la batteria
et ON/OFF
.
:
Inserimento / rimozione della staffa
di sostegno
NOTA
Non è possibile inserire / rimuovere la staffa
►
di sostegno
Inserimento della staffa di sostegno
(vedere fig. B–D):
♦ Premere il tasto di sbloccaggio .
♦ Introdurre la staffa di sostegno tramite le
guide della piastra di base nell'apparecchio.
♦ Bloccare il tasto di sblocco .
Rimozione della staffa di sostegno:
♦ Premere lo sbloccaggio ed estrarre in
avanti la staffa di sostegno dalla guida.
se la lama è montata .
Montaggio / sostituzione della lama
Indossare i guanti protettivi durante l'utilizzo / la
sostituzione della lama.
♦ Ruotare completamente il mandrino ad attacco
rapido in direzione della freccia e mantenerlo ruotato.
♦ Infilare la lama nel mandrino ad attacco rapido
spingendola fino a quando non raggiunge
la battuta.
ATTENZIONE!
► I denti della lama di taglio devono essere
rivolti verso il basso!
♦ Rilasciare il mandrino ad attacco rapido ,
che deve ritornare nella posizione di partenza.
La lama è ora bloccata.
FAAS 12 B2
IT│MT
│
7 ■
Messa in funzione
Accensione/spegnimento
Accensione:
♦ Premere il blocco di accensione .
♦ Premere l'interruttore ON/OFF .
Spegnimento:
♦ Rilasciare l'interruttore ON/OFF .
Metodi di taglio
A) Intervento senza staffa di sostegno
(vedere fig. E):
■ In caso di rami con diametri più grandi o di taglio
di legno, plastica e materiali di costruzione, lavorare SENZA la staffa di sostegno. Il componente
di taglio deve essere posizionato sulla piastra
di base. In caso di pezzi circolari muovere il
seghetto con movimenti avanti e indietro.
A1) Taglio a filo:
■ Con lame flessibili, a condizione che abbia-
no la lunghezza corrispondente, è possibile
tagliare pezzi sporgenti come ad es. es. tubi
direttamente alla parete.
1. Posizionare la lama direttamente sulla parete.
2. Piegarla con una pressione laterale sul seghetto
alternativo, in modo che la piastra di base
aderisca lateralmente sulla parete.
3. Accendere l'apparecchio e tagliare il pezzo
esercitando una pressione costante.
B) Interventi con staffa di sostegno
(vedere fig. G):
♦ Muovere il seghetto con una leggera pressione
verso il basso.
Manutenzione e pulizia
ATTENZIONE! PERICOLO DI LESIONI!
Prima di qualsiasi lavoro sull'apparecchio, rimuovere la batteria.
■ Prima di eseguire qualsiasi lavoro sull'elettro-
utensile, estrarre sempre la lama.
■ Tenere l'apparecchio e la fessura di ventila-
zione sempre puliti. In caso di fessure otturate,
sussiste il pericolo di surriscaldamento e /o di
danno dell'apparecchio.
■ Pulire l'apparecchio al termine del lavoro.
■ Impedire la penetrazione di liquidi all'interno
dell'apparecchio. Per la pulizia dell'alloggiamento utilizzare un panno. Non utilizzare
mai benzina, solventi o detergenti in grado di
attaccare la plastica.
■ Pulire all'occorrenza il supporto della lama con
un pennello o con aria compressa.
■ Se si intende conservare la batteria agli ioni di
litio per un periodo prolungato, occorre controllare periodicamente la sua carica. La carica
ottimale è compresa tra il 50% e l'80%.
Si consiglia di conservare la batteria in un
luogo fresco e asciutto.
A2) Taglio a immersione (vedere fig. F):
ATTENZIONE! PERICOLO DI RINCULO!
► I tagli a immersione possono essere eseguiti
solo con materiali morbidi (legno o simili).
1. Posizionare il seghetto alternativo con il bordo
inferiore della piastra di base
Accendere l'apparecchio.
2. Inclinare il seghetto in avanti e immergerlo con
la lama nel pezzo.
3. Posizionare il seghetto in verticale e continuare
a tagliare lungo la linea di taglio.
■ 8 │ IT
│
MT
sul pezzo.
FAAS 12 B2
Garanzia della
Kompernass Handels GmbH
Egregio Cliente,
Questo apparecchio ha una garanzia di 3 anni
dalla data di acquisto. Qualora questo prodotto
presentasse vizi, Le spettano diritti legali nei confronti del venditore del prodotto. La garanzia qui di
seguito descritta non costituisce alcun limite a tali
diritti legali.
Condizioni di garanzia
Il periodo di garanzia decorre dalla data dell’acquisto. Si prega di conservare lo scontrino di cassa
originale. Tale documento è necessario come
prova di acquisto.
Qualora entro tre anni a partire dalla data
dell’acquisto di questo prodotto si presentasse un
vizio del materiale o di fabbricazione, provvederemo, a nostra discrezione, a riparare o a sostituire
gratuitamente il prodotto. Questa prestazione di
garanzia ha come presupposto che l’apparecchio
difettoso e la prova di acquisto (scontrino di cassa)
vengano presentati entro il termine di tre anni e
che si descriva per iscritto in cosa consiste il vizio e
quando si è presentato.
Se il vizio rientra nell’ambito della nostra garanzia,
il Suo prodotto verrà riparato o sostituito da uno
nuovo. Con la riparazione o la sostituzione del prodotto non decorre un nuovo periodo di garanzia.
Periodo di garanzia e diritti legali di
rivendicazione di vizi
Il periodo di garanzia non viene prolungato da
interventi in garanzia. Ciò vale anche per le parti
sostituite e riparate. Danni e vizi eventualmente già
presenti al momento dell’acquisto devono venire
segnalati immediatamente dopo che l’apparecchio
è stato disimballato. Le riparazioni eseguite dopo
la scadenza del periodo di garanzia sono a
pagamento.
Ambito della garanzia
L’apparecchio è stato prodotto con cura secondo
severe direttive qualitative e debitamente collaudato
prima della consegna.
La garanzia viene prestata in caso di vizi del
materiale o di fabbricazione. Questa garanzia non
si estende a componenti del prodotto che sono
esposti al normale logorio e possono pertanto essere
considerati come componenti soggetti a usura o a
danni che si verificano su componenti delicati, per
es. interruttori, batterie, stampi da forno o parti
realizzate in vetro.
Questa garanzia decade se il prodotto è stato
danneggiato oppure utilizzato o sottoposto a
interventi di manutenzione in modo non conforme.
Per un utilizzo adeguato del prodotto si devono
rigorosamente rispettare tutte le istruzioni esposte
nel manuale di istruzioni per l’uso. Si devono assolutamente evitare modalità di utilizzo e azioni che
il manuale di istruzioni per l’uso sconsiglia o da cui
esso mette in guardia.
Il prodotto è destinato esclusivamente all’uso domestico e non a quello commerciale. La garanzia
decade in caso di impiego improprio o manomissione, uso della forza e interventi non eseguiti
dalla nostra filiale di assistenza autorizzata.
Trattamento dei casi di garanzia
Per garantire una rapida evasione della Sua richiesta,
La preghiamo di seguire le seguenti istruzioni:
■ Tenga a portata di mano per qualsiasi richiesta
lo scontrino di cassa e il codice dell’articolo
(per es. IAN 12345) come prova di acquisto.
■ Il codice dell’articolo è indicato sulla targhetta
di modello, su un’incisione, sul frontespizio del
manuale di istruzioni per l’uso (in basso a sinistro)
o come adesivo sul lato posteriore o inferiore.
■ Qualora si presentassero malfunzionamenti o
altri tipi di vizi, contatti innanzitutto il reparto
assistenza clienti qui di seguito indicato telefo-nicamente o via e-mail.
■ Una volta che il prodotto è stato registrato come
difettoso, lo può poi spedire a nostro carico,
provvedendo ad allegare la prova di acquisto
(scontrino di cassa), una descrizione del vizio
e l’indicazione della data in cui si è presentato,
all’indirizzo del servizio di assistenza clienti che
Le è stato comunicato.
FAAS 12 B2
IT│MT
│
9 ■
Al sito www.lidl-service.com si possono
scaricare questo e molti altri manuali di
istruzioni per l’uso, filmati sui prodotti e
software.
Assistenza
ATTENZIONE!
► Far riparare gli apparecchi dal centro di
assistenza o da un elettricista specializzato
e solo con pezzi di ricambio originali.
In tal modo si garantisce la sicurezza dell'apparecchio.
► Fare eseguire sempre la sostituzione della
spina o del cavo dal produttore dell'apparecchio o dal relativo centro di assistenza.
In tal modo si garantisce la sicurezza dell'apparecchio.
NOTA
I pezzi di ricambio non indicati (come ad es.
►
batteria, interruttore o staffa di sostegno)
possono essere ordinati tramite il nostro call
center.
Assistenza Italia
Tel.: 02 36003201
E-Mail: kompernass@lidl.it
Assistenza Malta
Tel.: 80062230
E-Mail: kompernass@lidl.com.mt
IAN 298707
Importatore
Badi che il seguente indirizzo non è quello del
servizio di assistenza clienti. Contatti innanzitutto
il servizio di assistenza clienti indicato.
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
DE - 44867 BOCHUM
GERMANIA
www.kompernass.com
Smaltimento
L'imballaggio è composto da materiali
ecocompatibili che possono essere
smaltiti tramite gli appositi centri di
raccolta e riciclaggio.
Non smaltire gli elettrodomestici
assieme ai normali rifiuti domestici.
In base alla direttiva europea 2012/19/EU, gli
apparecchi elettrici usati devono essere raccolti separatamente e inviati a un centro per il riciclaggio
ecologico.
Non smaltire le batterie assieme ai
normali rifiuti domestici!
Le batterie difettose o esauste devono essere
riciclate in base alla direttiva 2006/66/EC.
Riconsegnare il pacco batteria e/o l'apparecchio
presso gli appositi centri di raccolta.
Per le possibilità di smaltimento relative agli
elettroutensili/pacchi batterie usati, informarsi
presso il municipio o l'amministrazione comunale
di residenza.
Smaltire l‘imballaggio conformemente
alle norme di tutela ambientale.
Tenere conto dei codici presenti sui
vari materiali di imballaggio ed
eventualmente separare i materiali
effettuando una raccolta differenziata.
I materiali di imballaggio presentano
codici costituiti da abbreviazioni (a) e
numeri (b) con il seguente significato:
1–7: materie plastiche,
20–22: carta e cartone,
80–98: materiali compositi
Per lo smaltimento del prodotto una
volta che ha terminato la sua funzione,
informarsi presso l’amministrazione
comunale.
■ 10 │ IT
│
MT
FAAS 12 B2
Traduzione della dichiarazione di conformità originale
La Società KOMPERNASS HANDELS GMBH, responsabile della documentazione: Sig. Semi Uguzlu,
BURGSTR. 21, DE - 44867 BOCHUM, GERMANIA, dichiara con la presente che questo prodotto è
conforme alle norme, ai documenti normativi e alle direttive CE seguenti:
*Il produttore è il responsabile esclusivo del rilascio di questa dichiarazione di conformità. L’oggetto
della dichiarazione sopra descritto soddisfa le prescrizioni della Direttiva 2011/65/EU del Parlamento
Europeo e del Consiglio Europeo dell’8 giugno 2011 sulla restrizione dell’uso di determinate sostanze
pericolose nelle apparecchiature elettriche ed elettroniche.
Norme armonizzate utilizzate:
EN 60745-1:2009/A11:2010
EN 60745-2-11:2010
EN 62233:2008
EN 60335-1:2012/A11:2014
EN 60335-2-29:2004/A2:2010
EN 55014-1:2017
EN 55014-2:2015
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 61000-3-3:2013
EN 50581:2012
Tipo / denominazione dell'apparecchio: Seghetto ricaricabile per potatura FAAS 12 B2
Anno di produzione: 01 - 2018
Numero di serie: IAN 298707
Bochum, 20/01/2018
Semi Uguzlu
- Direttore qualità Con riserva di modifiche tecniche volte al miglioramento del prodotto.
Tradução da Declaração de Conformidade original ....................23
FAAS 12 B2
PT
│
13 ■
SERRA COM BATERIA
FAAS 12 B2
Introdução
Parabéns pela compra do seu novo aparelho.
Optou por um produto de elevada qualidade.
O manual de instruções é parte integrante deste
produto. Este contém instruções importantes para a
segurança, utilização e eliminação. Antes de utilizar
o produto, familiarize-se com todas as instruções
de operação e segurança. Utilize o produto apenas
como descrito e nas áreas de aplicação indicadas.
Ao transferir o produto para terceiros, entregue
todos os respetivos documentos.
Utilização correta
O aparelho - por norma uma serra de vaivém - foi
concebido, com batente fixo (placa base) para serrar madeira, plástico e materiais de construção. O
aparelho é adequado para trabalhos de serragem
grosseiros, cortes direitos e curvos, e para separar
superfícies niveladas. O aparelho é apropriado
para cortar ramos com o aro de retenção montado.
Observe as informações sobre as lâminas de serra
e as instruções de trabalho sobre a serragem. Qualquer outra utilização ou alteração da máquina é
considerada incorreta e acarreta perigos de acidente graves. O fabricante não se responsabiliza por
quaisquer danos causados pela utilização incorreta. Este aparelho não se destina ao uso comercial.
Equipamento
Bloqueio de ativação
Punho
Bloco de acumuladores
Desbloqueio (bloco de acumuladores)
Interruptor LIGAR/DESLIGAR
Lâmina de serra (SWISS MADE)
Placa base
Mandril de aperto rápido
Proteção manual
Desbloqueio (aro de retenção)
Aro de retenção
Carregador rápido de acumuladores
LED de controlo (verde)
LED de controlo (vermelho)
Indicador do estado do acumulador
■ 14 │ PT
Conteúdo da embalagem
1 Serra com bateria FAAS 12 B2
1 Carregador rápido de acumuladores
FAAS 12 B2-2
1 Bloco de acumuladores FAAS 12 B2-1
1 Aro de retenção
1 Lâmina de serra para madeira de 152 mm
/ TPI 6 (SWISS MADE)
1 Mala
1 Manual de instruções
Dados técnicos
Serra com bateria : FAAS 12 B2
Tensão nominal: 12 V
Velocidade de
rotação nominal: n
Comprimento do curso: 20 mm
Rendimento máximo
de corte: Madeira 80 mm
Bloco de acumuladores: FAAS 12 B2-1
Tipo: IÕES DE LÍTIO
Tensão nominal: 12 V
Capacidade: 2.000 mAh
Carregador rápido de
acumuladores: FAAS 12 B2-2
ENTRADA / Input:
Corrente nominal: 230 - 240 V ~, 50 Hz
Consumo de energia: 38 W
SAÍDA / Output:
Tensão nominal: 12,6 V
Corrente nominal: 2.400 mA
Duração do carregamento: aprox. 60 min.
Fusível (interior): 2 A
Classe de proteção: II / (isolamento duplo)
Valores de emissões sonoras:
Valor de medição para ruído, determinado de
acordo com a Norma EN ISO 4871. O nível
sonoro ponderado A da ferramenta elétrica no
local de utilização é, em geral:
(corrente contínua)
0–2.700 rpm
0
(corrente contínua)
(corrente alternada)
(corrente contínua)
T2A
FAAS 12 B2
Nível de pressão
acústica: LpA = 82 dB (A)
Incerteza: K
= 3 dB
pA
Nível de potência
acústica: L
Incerteza: K
= 93 dB (A)
WA
= 3 dB
WA
Usar protetores auriculares!
Valor total da vibração (soma vetorial de três
direções) determinados de acordo com a
Norma EN 60745:
Serrar placas de
aglomerado de madeira: a
Incerteza K = 1,5 m/s
2
Serrar barrotes de madeira: a
Incerteza K = 1,5 m/s
2
= 6,37 m/s
h,B
= 9,26 m/s
h,WB
NOTA
►
O nível de vibração indicado nestas instruções foi medido de acordo com um processo
de medição normalizado e pode ser utilizado para a comparação de aparelhos. O
valor da emissão de vibração indicado também pode ser utilizado para uma avaliação
preliminar da intermitência.
AVISO!
► O nível de vibração altera-se de acordo com
a utilização da ferramenta elétrica e pode,
em alguns casos, exceder o valor indicado
nestas instruções. O grau de vibração pode
ser subestimado, caso a ferramenta elétrica
seja utilizada regularmente desta forma. Tente manter a pressão exercida por vibrações
tão baixa quanto possível. Podem ser tomadas medidas para reduzir a pressão exercida
pela vibração, como por exemplo, o uso de
luvas ao utilizar a ferramenta e a limitação
do tempo de trabalho. Ao mesmo tempo,
todas as partes do ciclo de funcionamento
têm de ser tidas em conta (por exemplo, os
períodos em que a ferramenta elétrica está
desligada e aqueles em que está ligada, mas
funciona sem pressão).
Instruções gerais de
segurança para ferramentas elétricas
AVISO!
► Leia todas as instruções de segurança e indi-
cações. O não cumprimento das instruções
2
2
de segurança e indicações pode causar
choque elétrico, incêndio e/ou ferimentos
graves.
Guarde todas as instruções de segurança e
indicações para futuras consultas.
O conceito "ferramenta elétrica", utilizado nas
instruções de segurança, refere-se a ferramentas
elétricas operadas por rede elétrica (com cabo de
alimentação) e a ferramentas elétricas operadas
por acumulador (sem cabo de alimentação).
1. Segurança no local de trabalho
a) Mantenha o seu local de trabalho limpo e
bem iluminado. Desarrumação e áreas de
trabalho pouco iluminadas podem causar
acidentes.
b) Não trabalhe com a ferramenta elétrica em
ambientes com perigo de explosão, onde se
encontram líquidos, gases ou poeiras inflamáveis. As ferramentas elétricas originam faíscas
que podem inflamar poeiras e vapores.
c) Durante a utilização da ferramenta elétrica,
mantenha crianças e outras pessoas afastadas. Em caso de distração pode perder o
controlo do aparelho.
2. Segurança elétrica
a) A ficha de ligação da ferramenta elétrica
tem de ser adequada à tomada. A ficha não
pode, de forma alguma, ser alterada. Não
utilize quaisquer fichas de adaptadores em
conjunto com ferramentas elétricas com proteção de ligação à terra. Fichas inalteradas e
tomadas adequadas reduzem o risco de choque elétrico.
FAAS 12 B2
PT
│
15 ■
b) Evite o contacto físico com superfícies ligadas
à terra, como tubos, aquecimentos, fogões e
frigoríficos. Existe um risco maior de choque
elétrico, se o seu corpo estiver ligado à terra.
c) Mantenha as ferramentas elétricas afastadas
de chuva ou humidade. A infiltração de água
num aparelho elétrico aumenta o risco de choque elétrico.
d) Não utilize o cabo para um fim diferente do
previsto, p. ex. para transportar, pendurar a
ferramenta elétrica ou puxar a ficha da tomada. Mantenha o cabo afastado de calor,
óleo, arestas afiadas ou peças do aparelho
móveis. Cabos danificados ou enrolados au-
mentam o risco de choque elétrico.
e) Se trabalhar com uma ferramenta elétrica ao
ar livre, utilize apenas extensões que também
sejam adequadas para exterior. A utilização
de uma extensão adequada para o exterior
diminui o risco de choque elétrico.
f) Se não for possível evitar a utilização da
ferramenta elétrica num ambiente húmido,
utilize um disjuntor diferencial residual.
A utilização de um disjuntor diferencial residual
reduz o risco de choque elétrico.
3. Segurança de pessoas
a) Esteja sempre atento, observe o que está a
fazer e utilize a ferramenta elétrica de forma
sensata. Não utilize a ferramenta elétrica se
estiver doente, cansado ou com sono, ou sob
a influência de drogas, álcool ou medicamentos. Um momento de distração durante a
utilização da ferramenta elétrica pode causar
ferimentos graves.
b) Use o equipamento de proteção individual e
sempre óculos de proteção. O uso do equipamento de proteção individual, como máscaras
de proteção antipoeiras, calçado de segurança
antiderrapante, capacete de proteção ou protetores auriculares, de acordo com o tipo e a
aplicação da ferramenta elétrica, reduz o risco
de ferimentos.
c) Evite uma colocação em funcionamento invo-
luntária. Certifique-se de que a ferramenta
elétrica se encontra desligada antes de a ligar
à fonte de alimentação e/ou ao acumulador,
elevar ou transportar.
Se, durante o transporte da ferramenta elétrica,
tiver o dedo no interruptor ou ligar o aparelho
a uma fonte de alimentação quando este já se
encontra ligado, podem ocorrer acidentes.
d) Retire as ferramentas de ajuste ou a chave de
parafusos antes de ligar a ferramenta elétrica.
Uma ferramenta ou uma chave numa parte
rotativa do aparelho pode causar ferimentos.
e) Evite uma postura corporal incorreta. Assegu-
re uma posição estável e mantenha sempre
o equilíbrio. Desta forma, consegue controlar
melhor a ferramenta elétrica em situações inesperadas.
f) Use vestuário adequado. Não use roupas
largas ou joias. Mantenha o cabelo, o vestuário e as luvas afastados das peças móveis.
Vestuário solto, joias ou cabelos compridos
podem ser recolhidos pelas peças móveis.
g) Se existir a possibilidade de montar dispo-
sitivos de aspiração ou de recolha de pó,
certifique-se de que são ligados e utilizados
corretamente. A utilização de um dispositivo
de aspiração pode reduzir eventuais perigos
devido a poeiras.
4. Utilização e manuseamento da
ferramenta elétrica
a) Não sobrecarregue o aparelho. Utilize a
ferramenta elétrica apropriada para o seu
trabalho. Com a ferramenta elétrica adequa-
da, trabalhará melhor e de forma mais segura
na respetiva área de trabalho.
b) Não utilize qualquer ferramenta elétrica,
cujo interruptor esteja avariado. Uma ferramenta elétrica que não se consegue ligar nem
desligar constitui perigo e tem de ser reparada.
c) Retire a ficha da tomada e/ou o acumulador
antes de realizar ajustes no aparelho, substituir acessórios ou se não estiver a utilizar o
aparelho. Esta medida de segurança evita o
arranque involuntário da ferramenta elétrica.
d) Guarde as ferramentas elétricas que não
estão a ser utilizadas fora do alcance das
crianças. Não autorize a utilização do aparelho por pessoas que não estejam familiarizadas com o mesmo ou que não tenham lido
estas instruções.
■ 16 │ PT
FAAS 12 B2
As ferramentas elétricas são perigosas, caso
sejam utilizadas por pessoas inexperientes.
e) F
aça uma manutenção cuidadosa das ferramentas elétricas. Verifique se as peças móveis
funcionam corretamente e não se encontram
encravadas, se peças estão partidas ou danificadas a ponto de interferir no bom funcionamento da ferramenta elétrica. Antes de utilizar
o aparelho, as peças danificadas devem ser
reparadas. Muitos acidentes ocorrem devido à
má manutenção das ferramentas elétricas.
f) Mantenha as ferramentas de corte afiadas e
limpas. Ferramentas de corte bem conservadas
e afiadas encravam muito menos e são mais
fáceis de conduzir.
g) Utilize a ferramenta elétrica, os acessórios,
as ferramentas de aplicação, etc., de acordo
com estas instruções. Tenha em consideração
as condições de trabalho e a atividade a
exercer. A utilização de ferramentas elétricas
para outras utilizações diferentes das previstas
pode levar a situações perigosas.
5. Utilização e manuseamento da
ferramenta sem fio
a) Carregue os acumuladores apenas em carre-
gadores recomendados pelo fabricante. Se
um carregador adequado a um tipo específico
de acumuladores for utilizado com outros acumuladores, existe perigo de incêndio.
b) Utilize, nas ferramentas elétricas, apenas os
acumuladores previstos para as mesmas.
A utilização de outros acumuladores pode
causar ferimentos e perigo de incêndio.
c) Mantenha o acumulador não utilizado afas-
tado de clipes, moedas, chaves, pregos,
parafusos ou de outros pequenos objetos de
metal, que possam causar uma conexão dos
contactos. Um curto-circuito entre os contactos
do acumulador pode levar à ocorrência de
queimaduras ou incêndio.
d) Se o acumulador for utilizado de forma
incorreta, é possível que verta líquido. Evite
o contacto com este líquido. Em caso de contacto acidental, lave com água. Se o líquido
entrar em contacto com os olhos, procure
adicionalmente assistência médica.
O líquido vertido do acumulador pode provocar irritações ou queimaduras na pele.
CUIDADO! PERIGO DE EXPLOSÃO!
Nunca carregue acumuladores que
não sejam recarregáveis.
Proteja o acumulador contra calor,
p. ex. também contra incidência solar
prolongada, fogo, água e humidade.
Há perigo de explosão.
6. Assistência Técnica
a) A sua ferramenta elétrica só pode ser repara-
da por técnicos especializados e com peças
sobresselentes de origem. Desta forma, é
garantida a segurança da ferramenta elétrica.
Instruções de segurança específicas
para serras de vaivém
■ Segure na ferramenta elétrica apenas pelas
superfícies isoladas do punho quando realizar trabalhos em que a ferramenta elétrica
possa atingir cabos elétricos ocultos ou o
próprio cabo de alimentação do aparelho.
O contacto com um cabo condutor de tensão
também pode colocar peças metálicas do aparelho sob tensão, levando à ocorrência de um
choque elétrico.
■ Use uma máscara de proteção antipoeiras!
FAAS 12 B2
PT
│
17 ■
Instruções de segurança para
carregadores
■ Este aparelho pode ser utilizado
por crianças com idades superiores
a 8 anos, bem como por pessoas
com capacidades físicas, sensoriais
ou mentais reduzidas, ou com falta
de experiência e/ou conhecimento,
caso sejam vigiadas ou instruídas
sobre a utilização segura do aparelho e compreendam os perigos daí
resultantes. As crianças não podem
brincar com o aparelho. A limpeza
e a manutenção pelo utilizador não
podem ser realizadas por crianças
não vigiadas.
O carregador destina-se ape-
nas ao funcionamento em espaços interiores.
■ Se o cabo de alimentação deste
aparelho for danificado, terá de
ser substituído pelo fabricante, pelo
seu serviço de apoio ao cliente ou
por uma pessoa igualmente qualificada, a fim de evitar situações de
perigo.
Indicações de trabalho para a
serragem
■ Verifique se o material a trabalhar está livre
de objetos estranhos, como pregos, parafusos,
etc., e retire-os.
■ Desligue imediatamente o aparelho, caso a
lâmina de serra bloqueie. Alargue a ranhura já
serrada com uma ferramenta adequada e retire
a serra de vaivém.
■ Serre o material com um avanço uniforme.
Acessórios/aparelhos adicionais de
origem
■ Utilize apenas acessórios e aparelhos adicio-
nais indicados no manual de instruções.
A utilização de ferramentas elétricas ou acessórios diferentes dos recomendados no manual
de instruções pode significar perigo de ferimentos para si.
Informações relativas às lâminas
de serra
Pode utilizar qualquer outra lâmina de serra, desde
que esteja equipada com o suporte de haste universal adequado de ½'' (12,7 mm). No comércio
podem ser adquiridas lâminas de serra, em diferentes comprimentos, para todos os fins de aplicação da sua serra de vaivém.
NOTA
TPI = teeth per inch = o número de dentes
►
por 2,54 cm
■ 18 │ PT
FAAS 12 B2
Antes da colocação em
funcionamento
Carregar o bloco de acumuladores
CUIDADO!
► Retire sempre a ficha da tomada antes de co-
locar ou retirar o bloco de acumuladores
do carregador rápido de acumuladores .
■ Nunca carregue o bloco de acumuladores ,
se a temperatura ambiente for inferior a 10 °C
ou superior a 40 °C.
♦ Insira o bloco de acumuladores no carregador
rápido .
♦ Insira a ficha na tomada. O LED de controlo
acende-se a vermelho.
♦ O LED verde de controlo indica que o pro-
cesso de carga está finalizado e que o bloco
de acumuladores está operacional.
♦ Insira o bloco de acumuladores no aparelho.
♦ Desligue o carregador rápido , entre proces-
sos de carga sucessivos, no mínimo durante
15 minutos. Para tal, retire a ficha da tomada.
Colocar/retirar o bloco de acumuladores do aparelho
Introduzir o bloco de acumuladores:
♦ Deixe encaixar o bloco de acumuladores
no punho
Retirar o bloco de acumuladores:
♦ Prima o tatear de desbloqueio e retire o
bloco de acumuladores
Verificar o estado do acumulador
♦ Para verificar o estado do acumulador, prima o
interruptor Bloqueio de ativação
DESLIGAR
tante é indicada no indicador do estado do
acumulador da seguinte forma:
♦ VERMELHO / LARANJA / VERDE =
carga/potência máxima
VERMELHO / LARANJA =
carga/potência média
VERMELHO = carga fraca - carregar o
acumulador
.
.
o LIGAR/
. O estado ou a potência res-
Colocar/retirar aro de retenção
NOTA
Não é possível colocar/retirar o aro de
►
retenção
montada.
Colocar aro de retenção (ver fig. B–D):
♦ Prima o botão de desbloqueio .
♦ Insira o aro de retenção no aparelho por
meio das guias da placa base .
♦ Trave o botão de desbloqueio .
Retirar aro de retenção:
♦ Prima o desbloqueio e puxe o aro de
retenção para a frente, para fora da guia.
com a lâmina de serra
Montar/substituir a lâmina de serra
Ao colocar/substituir a lâmina de serra, use luvas
de proteção.
♦ Rode o mandril de aperto rápido comple-
tamente na direção da seta e mantenha-o
rodado.
♦ Pressione a lâmina de serra necessária, até ao
encosto, no mandril de aperto rápido .
ATENÇÃO!
► Os dentes da lâmina de serra têm de
estar voltados para baixo!
♦ Solte o mandril de aperto rápido ; este tem
de regressar à sua posição inicial. A lâmina
de serra está agora bloqueada.
FAAS 12 B2
PT
│
19 ■
Colocação em funcionamento
Ligar/desligar
B) Trabalhar com aro de retenção (ver fig. G):
♦ Desloque a serra para baixo com leve pressão.
Ligar:
♦ Prima o bloqueio de ativação .
♦ Prima o interruptor LIGAR/DESLIGAR .
Desligar:
♦ Solte o interruptor LIGAR/DESLIGAR .
Métodos de serragem
A) Trabalhar sem aro de retenção (ver fig. E):
■ Em diâmetros de ramo maiores ou na serragem
de madeira, plástico e materiais de construção
trabalhe SEM aro de retenção. A peça a serrar
tem de estar apoiada na placa base. Desloque
a serra, em peças de trabalho redondas, em
corte oscilante.
A1) Serrar de forma nivelada:
■ Com lâminas de serra flexíveis, desde que com
os respetivos comprimentos, pode serrar peças
a trabalhar salientes diretamente na parede,
como p. ex. tubos.
1. Coloque a lâmina de serra diretamente na parede.
2. Dobre-a, aplicando pressão lateral na serra de
vaivém, de modo que a placa base
encostada lateralmente à parede.
3. Ligue o aparelho e serre a peça a trabalhar
com uma pressão constante.
fique
Manutenção e limpeza
AVISO! PERIGO DE FERIMENTOS!
Antes de realizar quaisquer trabalhos no aparelho, desligue-o e retire
o bloco de acumuladores.
■ Antes de efetuar qualquer trabalho na ferra-
menta elétrica, retire sempre a lâmina de serra.
■ Mantenha o aparelho e as ranhuras de venti-
lação sempre limpos. Se as ranhuras de ventilação estiverem bloqueadas, o aparelho pode
sobreaquecer e/ou ficar danificado.
■ Limpe o aparelho após a conclusão do traba-
lho.
■ Não podem entrar quaisquer líquidos para
o interior do aparelho. Utilize um pano para
limpar o corpo do aparelho. Nunca utilize
benzina, solventes ou detergentes agressivos
para o plástico.
■ Limpe o alojamento da lâmina de serra, se
necessário, com um pincel ou soprando com
ar comprimido.
■ Se for necessário guardar um acumulador de
iões de lítio durante um longo período de tempo, o estado de carga tem de ser controlado
regularmente. O estado de carga ideal situa-se
entre 50% e 80%. O ambiente de armazenamento ideal é fresco e seco.
A2) Serragem de imersão (ver fig. F):
CUIDADO! CONTRAGOLPE!
► Cortes de profundidade só podem ser
realizados em materiais macios (madeira ou
materiais semelhantes).
1. Coloque a serra de vaivém com a aresta inferior
da placa base
Ligue o aparelho.
2. Incline a serra de vaivém para a frente e imerja
a lâmina de serra na peça a trabalhar.
3. Coloque a serra de vaivém na vertical e continue
a serrar ao longo da linha de corte.
sobre a peça a trabalhar.
■ 20 │ PT
FAAS 12 B2
Garantia da
Kompernass Handels GmbH
Estimada Cliente, Estimado Cliente,
Este aparelho tem uma garantia de 3 anos a
contar da data de compra. No caso deste produto
ter defeitos, tem direitos legais contra o vendedor
do produto. Estes direitos legais não são limitados
pela nossa garantia que passamos a transcrever.
Condições de garantia
O prazo de garantia tem início na data da
compra. Por favor, guarde bem o talão de compra
original. Este documento é necessário como comprovativo da compra.
Se dentro de três anos a partir da data de compra
deste produto, ocorrer um defeito de material ou
fabrico, o produto será reparado ou substituído
por nós – consoante a nossa preferência – gratuitamente. Esta garantia parte do princípio que o
aparelho defeituoso e o comprovativo da compra
(talão de compra) são apresentados dentro do prazo
de três anos e é descrito brevemente, por escrito,
em que consiste o defeito e quando ocorreu.
Se o defeito estiver coberto pela nossa garantia,
receberá o produto reparado ou um novo produto.
Prazo de garantia e direitos legais
O período de garantia não é prolongado pelo
acionamento da mesma. Isto também se aplica a
peças substituídas e reparadas. Danos e defeitos
que possam eventualmente já existir no momento
da compra devem ser imediatamente comunicados,
após retirar o aparelho da embalagem. Expirado
o período da garantia, quaisquer reparações
necessárias estão sujeitas a pagamento.
Âmbito da garantia
O aparelho foi fabricado segundo diretivas de
qualidade rigorosas, com o maior cuidado, e testado
escrupulosamente antes da sua distribuição.
A garantia abrange apenas defeitos de material
ou de fabrico. Esta garantia não abrange peças
do produto, que estão sujeitas ao desgaste normal
e podem ser consideradas desta forma peças
de desgaste, ou danos em peças frágeis, p. ex.
interruptores, acumuladores, formas para bolos ou
peças de vidro.
Esta garantia perde a validade, se o produto
for danificado, utilizado incorretamente ou se a
manutenção tenha sido realizada indevidamente.
Para garantir uma utilização correta do produto, é
necessário cumprir todas as instruções contidas no
manual de instruções. Ações ou fins de utilização
que são desaconselhados, ou para os quais é
alertado no manual de instruções, têm de ser
impreterivelmente evitados.
O produto foi concebido apenas para uso privado
e não para uso comercial. A garantia extingue-se
em caso de utilização incorreta, uso de força e
intervenções que não tenham sido efetuadas pela
nossa Filial de Assistência Técnica autorizada.
Procedimento em caso de acionamento
da garantia
Para garantir um processamento rápido do seu
pedido, siga, por favor, as seguintes instruções:
■ Para todos os pedidos de esclarecimento, tenha
à mão o talão de compra e o número do artigo
(p. ex. IAN 12345) como comprovativo da
compra.
■ O número do artigo consta na placa de carac-
terísticas, numa impressão, na capa do seu
manual de instruções (em baixo à esquerda) ou,
como autocolante, no verso ou no lado inferior.
■ Caso ocorram falhas de funcionamento ou
outros defeitos, contacte primeiro o Serviço
de Assistência Técnico, indicado em seguida,
telefonicamente ou por e-mail.
■ De seguida, pode enviar gratuitamente o
produto registado como defeituoso, incluindo o
comprovativo da compra (talão de compra) e
indique o defeito e quando este ocorreu, para
a morada do Serviço de Assistência Técnica
que lhe foi indicada.
Em www.lidl-service.com poderá
descarregar este manual de instruções
e muitos outros, bem como vídeos sobre
os produtos e software.
FAAS 12 B2
PT
│
21 ■
Assistência Técnica
AVISO!
► Solicite a reparação dos seus aparelhos ao
Serviço de Assistência Técnica ou a um eletricista devidamente qualificado e apenas
com peças sobresselentes originais. Desta
forma, é garantida a segurança do aparelho.
► A substituição da ficha ou do cabo de
alimentação elétrica deve ser efetuada
sempre pelo fabricante do aparelho ou
pelo seu serviço de apoio ao cliente. Desta
forma, é garantida a segurança do aparelho.
Eliminação
A embalagem é composta por materiais
recicláveis que pode depositar nos ecopontos locais.
Não coloque ferramentas elétricas
no lixo doméstico!
Em conformidade com a Diretiva Europeia 2012/19/EU, as ferramentas elétricas
usadas têm de ser recolhidas separadamente e
submetidas a reciclagem adequada.
NOTA
Peças sobresselentes não especificadas
►
(como p. ex. acumulador, interruptor ou aro
de retenção) podem ser encomendas por
meio da nossa central telefónica.
Por favor, observe que a seguinte morada não é a
morada do Serviço de Assistência Técnica. Primeiro
entre em contacto com o Serviço de Assistência
Técnica.
Acumuladores com defeito ou usados têm de
ser reciclados em conformidade com a Diretiva
2006/66/EC. Devolva o bloco de acumuladores
e /ou o aparelho nos pontos de recolha disponibilizados.
Relativamente às possibilidades de eliminação de
ferramentas elétricas/blocos de acumuladores,
informe-se junto da junta de freguesia ou câmara
municipal da sua área de residência.
Elimine a embalagem de modo
ecológico.
Tenha em atenção a marcação nos
diversos materiais de embalagem e
separe-os convenientemente. Os
materiais de embalagem estão
identificados com abreviaturas (a) e
algarismos (b), com os seguintes
significados:
1–7: plásticos,
20–22: papel e cartão,
80–98: compostos
■ 22 │ PT
Relativamente às possibilidades de
eliminação do produto em fim de vida,
informe-se na junta de freguesia ou
câmara municipal da sua área de
residência.
FAAS 12 B2
Tradução da Declaração de Conformidade original
Nós, KOMPERNASS HANDELS GMBH, responsável pela documentação: Sr. Semi Uguzlu,
BURGSTR. 21,
documentos normativos, normas e diretivas comunitárias:
Diretiva Máquinas
(2006 / 42 / EC)
Compatibilidade Eletromagnética
(2014 / 30 / EU)
Diretiva Baixa Tensão CE
(2014 / 35 / EU)
Diretiva RSP (Restrição de Substâncias Perigosas)
(2011 / 65 / EU)*
*O fabricante é o único responsável pela emissão desta declaração de conformidade. O objeto da declaração acima descrito cumpre os regulamentos da Diretiva 2011/65/EU do Parlamento Europeu e do
Conselho de 8 de junho de 2011 relativamente à limitação da utilização de determinadas substâncias
perigosas em aparelhos elétricos e eletrónicos.
Normas harmonizadas aplicadas:
EN 60745-1:2009/A11:2010
EN 60745-2-11:2010
EN 62233:2008
EN 60335-1:2012/A11:2014
EN 60335-2-29:2004/A2:2010
EN 55014-1:2017
EN 55014-2:2015
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 50581:2012
Tipo/designação do aparelho: Serra com bateria FAAS 12 B2
Ano de fabrico: 01 - 2018
Número de série: IAN 298707
Bochum, 20.01.2018
DE - 44867 BOCHUM, ALEMANHA, declaramos que este produto cumpre os seguintes
Semi Uguzlu
- Gestor de qualidade Reservado o direito a alterações técnicas no âmbito do desenvolvimento.
Translation of the original Conformity Declaration .....................34
FAAS 12 B2
GB│MT
│
25 ■
CORDLESS BRANCH SAW
FAAS 12 B2
Introduction
Congratulations on the purchase of your new appliance. You have selected a high-quality product. The
operating instructions are part of this product. They
contain important information on safety, usage and
disposal. Before using the product, please familiarise yourself with all operating and safety instructions. Use the product only as described and for the
specified areas of application. Please also pass on
these operating instructions to any future owner.
Intended use
This appliance – standard designation: reciprocating saw – is intended for the sawing of wood,
plastics and building materials up to a fixed stop
(base plate). The appliance is suitable for rough
sawing work, straight and curved cuts; it cuts surfaces off flush. With the grip bracket mounted, the
appliance is suitable for sawing branches. Follow
the information concerning saw blades and practical advice on sawing. Any other uses of or modification to the appliance is deemed to be improper
and carries the risk of serious personal injury. The
manufacturer accepts no responsibility for damage(s) attributable to misuse. The appliance is not
intended for commercial use.
Features
Safety lock-out
Handle
Battery pack
Release (battery pack)
ON/OFF switch
Saw blade (SWISS MADE)
Base plate
Quick-release chuck
Hand guard
Release (grip bracket)
Grip bracket
High-speed battery charger
Control LED (green)
Control LED (red)
Battery charge level display
Package contents
1 cordless branch saw FAAS 12 B2
1 high-speed battery charger FAAS 12 B2-2
1 battery pack FAAS 12 B2-1
1 grip bracket
1 saw blade for wood 152 mm / TPI 6
(SWISS MADE)
1 carrying case
1 set of operating instructions
Technical data
Cordless branch saw: FAAS 12 B2
Rated voltage: 12 V
Rated idle speed: n0 0–2700 rpm
Stroke length: 20 mm
Max. cutting performance: Wood 80 mm
Battery pack: FAAS 12 B2-1
Type: LITHIUM ION
Rated voltage: 12 V
Capacity: 2000 mAh
High-speed
battery charger: FAAS 12 B2-2
INPUT:
Rated current: 230–240 V ~, 50Hz
(alternating current)
Rated power consumption: 38 W
OUTPUT:
Rated voltage: 12.6 V
Rated current: 2400 mA
Charging time: approx. 60 min.
Fuse (internal): 2 A
Protection class: II / (double insulation)
Noise emission values:
Measured values for noise determined in accordance
with EN ISO 4871. The A-rated noise level of the
power tool at the working location is typically as
follows:
Sound pressure level: LpA = 82 dB(A)
Uncertainty: K
Sound power level: L
Uncertainty: K
pA
WA
WA
Wear hearing protection!
(DC)
(DC)
(DC)
T2A
= 3 dB
= 93 dB(A)
= 3 dB
■ 26 │ GB
│
MT
FAAS 12 B2
Total vibration values (vector total of three directions) determined in accordance with EN 60745:
Cutting boards: a
Cutting wooden beams: a
= 6.37 m/s
h,B
Uncertainty K = 1.5 m/s
= 9.26 m/s
h,WB
Uncertainty K = 1.5 m/s
2
2
NOTE
►
The vibration level specified in these instructions has been measured in accordance with
a standardised measuring procedure and can
be used to make equipment comparisons. The
specified vibration emission value can also
be used to make an initial exposure estimate.
WARNING!
► The vibration level varies in accordance with
the use of the power tool and may be higher
than the value specified in these instructions
in some cases. Regular use of the electric
tool in such a way may cause the user to
underestimate the vibration. Try to keep the
vibration loads as low as possible. Measures
to reduce the vibration load are, e.g. wearing
gloves and limiting the working time. Wherein
all states of operation must be included (e.g.
times when the power tool is switched off and
times where the power tool is switched on but
running without load).
General Power
Tool Safety
2
2
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or batteryoperated (cordless) power tool.
1. Work area safety
a) Keep work area clean and well lit.
b) Do not operate power tools in explosive atmo-
c) Keep children and bystanders away while
Warnings
WARNING!
► Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fire and/or
serious injury.
Cluttered or dark areas invite accidents.
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
operating a power tool. Distractions can cause
you to lose control.
FAAS 12 B2
2. Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric
shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
GB│MT
│
27 ■
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
e) When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces
the risk of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
3. Personal safety
a) Stay alert, watch what you are doing and
use common sense when operating a power
tool. Do not use a power tool while you are
tired or under the influence of drugs, alcohol
or medication. A moment of inattention while
operating power tools may result in serious
personal injury.
b) Use personal protective equipment. Always
wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
revent unintentional starting. Ensure the
c) P
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools
with your finger on the switch or energising power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key
left attached to a rotating part of the power tool
may result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
ress properly. Do not wear loose clothing or
f) D
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewel-
lery or long hair can be caught in moving parts.
g) If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
4. Power tool use and care
a) Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at
the rate for which it was designed.
b) Do not use the power tool if the switch does
not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous
and must be repaired.
c) Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are dan-
gerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool’s operation. If damaged, have the
power tool repaired before use. Many acci-
dents are caused by poorly maintained power
tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions, taking into account the working conditions and
the work to be performed. Use of the power
tool for operations different from those intended
could result in a hazardous situation.
■ 28 │ GB
│
MT
FAAS 12 B2
5. Use and handling of the cordless
electrical power tool
a) Charge a rechargeable battery unit using
only the charger recommended by the manufacturer. Chargers are often designed for a
particular type of rechargeable battery unit.
There is the danger of fire if other types of rechargeable battery units are used.
b) Only the rechargeable battery units supplied
are to be used with an electrical power tool.
The use of other rechargeable battery units may
lead to the danger of injury or fire.
c) When they are not being used, store re-
chargeable battery units away from paper
clips, coins, keys, nails, screws or other small
metal objects that could cause the contacts
to be bridged. Short-circuiting the contacts of
a rechargeable battery unit may result in heat
damage or fire.
d) Fluids may leak out of rechargeable batteries
if they are misused. If this happens, avoid
contact with the fluid. If contact occurs, flush
the affected area with water. Seek additional
medical help if any of the fluid gets into your
eyes. Escaping battery fluid may cause skin
irritation or burns.
CAUTION! RISK OF EXPLOSION!
Never charge non-rechargeable
batteries!
Protect the rechargeable battery
from heat, for example from continuous exposure to sunlight, fire, water
and moisture. There is a risk of explo-
sion.
6. Service
a) Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the
power tool is maintained.
Appliance-specific safety instructions
■ Hold power tool by insulated gripping surfac-
es, when performing an operation where the
fastener may contact hidden wiring or its own
cord. Fasteners contacting a “live” wire may
make exposed metal parts of the power tool
“live” and could give the operator an electric
shock.
■ Wear a dust mask!
Safety guidelines for battery
chargers
■ This appliance may be used by chil-
dren aged 8 years and above and
by persons with limited physical,
sensory or mental capabilities or
lack of experience and knowledge,
provided that they are under supervision or have been told how to use
the appliance safely and are aware
of the potential risks. Do not allow
children to play with the appliance.
Cleaning and user maintenance
tasks may not be carried out by children unless they are supervised.
This charger is suitable for in-
door use only.
FAAS 12 B2
■ To avoid potential risks, damaged
mains cables should be replaced by
the manufacturer or the manufacturer’s customer service department or
a similarly qualified person.
GB│MT
│
29 ■
Practical advice on sawing
■ Check the material to be worked to make sure
that all foreign objects have been removed,
e.g. nails, screws, etc.
■ Switch the appliance off immediately if the saw
blade jams. Open up the sawn gap using a
suitable tool and pull out the reciprocating saw.
■ Saw the material at a constant speed.
Original accessories/auxiliary
equipment
■ Use only the additional equipment and ac-
cessories specified in the operating instructions.
Using attachments or accessory tools other than
those recommended in the operating instructions
can lead to a risk of injury.
Information on saw blades
You can use any saw blade that has a suitable
mount – ½" (12.7 mm) universal shaft. Saw blades
are available from retail stores in various lengths
and optimised for a variety of purposes.
NOTE
TPI = teeth per inch = the number of teeth per
►
2.54 cm
Before use
Charging the battery pack
CAUTION!
► Always unplug the appliance before you
remove the battery pack
the battery pack to the high-speed battery
charger .
■ Never charge the battery pack when the
ambient temperature is below 10°C or above
40°C.
♦ Connect the battery pack to the high-speed
battery charger
♦ Insert the power plug into the socket. The control
LED lights up red.
♦ The green control LED indicates that the
charging process is complete and the battery
pack is ready for use.
♦ Push the battery pack back into the appli-
ance.
♦ You should always switch the high-speed charg-
er off for at least 15 minutes between successive charging processes. Also disconnect the
power plug from the mains power socket.
.
Attaching/disconnecting the battery
pack to/from the appliance
Attaching the battery pack:
♦ Click the battery pack into the handle .
Removing the battery pack:
♦ Press the release buttons and remove the
battery pack
.
Checking the battery charge level
♦ Press the safety lock-out
OFF switch
battery. The status/remaining charge will be
shown on the battery charge level display
as follows:
♦ RED / ORANGE / GREEN = maximum
charge/performance
RED/ORANGE = medium charge/performance
RED = low charge – charge the battery
to check the charge level of the
from or connect
and the ON/
■ 30 │ GB
│
MT
FAAS 12 B2
Attaching/removing the grip bracket
NOTE
►
The grip bracket cannot be attached/
removed while the saw blade
Attaching the grip bracket (see fig. B–D):
♦ Press the release button .
♦ Push the grip bracket over the guides on the
base plate and onto the appliance.
♦ Lock the release button .
Removing the grip bracket:
♦ Press the release and pull the grip bracket
forwards out of the guides.
is attached.
Fitting/changing the saw blade
Wear protective gloves when fitting/changing a
saw blade.
♦ Turn the quick-release chuck as far as it will
go in the direction of the arrow and hold it in
this position.
♦ Push the required saw blade into the quick-
release chuck as far as the stop.
CAUTION!
► The teeth of the saw blade must point
downwards!
Operation
Switching on and off
Switching on:
♦ Press the safety lock-out .
♦ Press the ON/OFF switch .
Switching off:
♦ Release the ON/OFF switch .
Sawing methods
A) Working without the grip bracket (see fig. E):
■ For branches of a larger diameter or wood,
plastic or building material, work without the
grip bracket. The workpiece must be right up
against the base plate. Use a rocking cutting
motion for round workpieces.
A1) Sawing flush:
■ Flexible saw blades allow you to saw off pro-
truding workpieces such as pipes located close
to the wall, provided the saw blade is long
enough.
1. Place the saw blade directly against the wall.
2. Bend it by applying lateral pressure to the reciprocating saw so that the base plate
into contact with the wall.
3. Switch the appliance on as described and saw
off the workpiece by applying constant pressure.
A2) Plunge cutting (see fig. F):
comes
♦ Let go of the quick-release chuck ; it must
return to its initial position.
The saw blade is now locked.
FAAS 12 B2
CAUTION! RISK OF KICKBACK!
► Plunge cuts may only be made in soft materials
(wood or similar).
1. Place the reciprocating saw with the lower edge
of the base plate
the appliance on.
2. Tilt the reciprocating saw forwards and plunge
the saw blade into the workpiece.
3. Position the reciprocating saw vertically and
continue sawing along the cutting line.
B) Working with the grip bracket (see fig. G):
♦ Push down lightly and move the saw downwards.
on the workpiece. Switch
GB│MT
│
31 ■
Maintenance and cleaning
WARNING! RISK OF INJURY! Always
switch the appliance off and remove
the battery before carrying out any
work on the appliance.
■ Always remove the saw blade before carrying
out any work on the power tool.
■ Keep the appliance and ventilation slits clean at
all times. If the ventilation slits are blocked, there
is a risk of overheating and/or the appliance
being damaged.
■ Always clean the appliance after completion
of work.
■ Do not allow any liquids to get into the appli-
ance. Use a cloth to clean the housing. Never
use petrol, solvents or cleansers which can
damage plastic.
■ Clean the saw blade mount, if necessary with a
brush or by blowing it out with compressed air.
■ If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly. The optimum charge level is
between 50% and 80%. The optimum storage
climate is cool and dry.
Kompernass Handels GmbH
warranty
Dear Customer,
This appliance has a 3-year warranty valid from
the date of purchase. If this product has any faults,
you, the buyer, have certain statutory rights. Your
statutory rights are not restricted in any way by the
warranty described below.
Warranty conditions
The validity period of the warranty starts from the
date of purchase. Please keep your original receipt
in a safe place. This document will be required as
proof of purchase.
If any material or production fault occurs within
three years of the date of purchase of the product,
we will either repair or replace the product for you
at our discretion. This warranty service is dependent
on you presenting the defective appliance and
the proof of purchase (receipt) and a short written
description of the fault and its time of occurrence.
If the defect is covered by the warranty, your product
will either be repaired or replaced by us. The repair
or replacement of a product does not signify the
beginning of a new warranty period.
■ 32 │ GB
│
MT
Warranty period and statutory claims for
defects
The warranty period is not prolonged by repairs
effected under the warranty. This also applies to
replaced and repaired components. Any damage
and defects present at the time of purchase must
be reported immediately after unpacking. Repairs
carried out after expiry of the warranty period shall
be subject to a fee.
FAAS 12 B2
Scope of the warranty
This appliance has been manufactured in accordance
with strict quality guidelines and inspected meticulously prior to delivery.
The warranty covers material faults or production
faults. The warranty does not extend to product parts
subject to normal wear and tear or fragile parts such
as switches, batteries, baking moulds or parts made
of glass.
The warranty does not apply if the product has been
damaged, improperly used or improperly maintained.
The directions in the operating instructions for the
product regarding proper use of the product are
to be strictly followed. Uses and actions that are
discouraged in the operating instructions or which
are warned against must be avoided.
This product is intended solely for private use and
not for commercial purposes. The warranty shall be
deemed void in cases of misuse or improper handling,
use of force and modifications/repairs which have
not been carried out by one of our authorised
Service centres.
Warranty claim procedure
To ensure quick processing of your case, please
observe the following instructions:
■ Please have the till receipt and the item number
(e.g. IAN 12345) available as proof of purchase.
■ You will find the item number on the type plate,
an engraving on the front page of the instructions
(bottom left), or as a sticker on the rear or
bottom of the appliance.
■ If functional or other defects occur, please
contact the service department listed either by
telephone or by e-mail.
■ You can return a defective product to us free of
charge to the service address that will be provided
to you. Ensure that you enclose the proof of
purchase (till receipt) and information about
what the defect is and when it occurred.
Service
WARNING!
► Have the power tool repaired by the Service
centre or a qualified electrician and only
using genuine replacement parts. This will
ensure that the safety of the appliance is
maintained.
► Always ensure that the power plug or the
mains cable is replaced only by the manufacturer of the appliance or by an approved
customer service provider. This will ensure
that the safety of the appliance is maintained.
NOTE
Replacement parts not listed (such as
►
batteries, switches and grip bracket) can be
ordered via our service hotline.
You can download these instructions
along with many other manuals,
product videos and software on
www.lidl-service.com.
FAAS 12 B2
GB│MT
│
33 ■
Disposal
The packaging is made from environmen-
tally friendly material and can be disposed of at your local recycling plant.
Do not dispose of power tools in
your normal household waste!
European Directive 2012/19/EU requires that
worn-out power tools be collected separately and
recycled in an environmentally compatible manner.
Do not dispose of batteries in your
normal domestic waste!
Defective or worn-out rechargeable batteries must
be recycled according to Directive 2006/66/EC.
Take the battery pack and/or appliance to a
nearby collection facility.
Please consult your local authorities regarding
suitable disposal of worn out power tools/battery
packs.
Dispose of the packaging in an
environmentally friendly manner.
Note the labelling on the packaging
and separate the packaging material
components for disposal if necessary.
The packaging material is labelled
with abbreviations (a) and numbers
(b) with the following meanings:
1–7: Plastics,
20–22: Paper and cardboard,
80–98: Composites
Your local community or municipal
authorities can provide information on
how to dispose of the worn-out
product.
Translation of the original
Conformity Declaration
We, KOMPERNASS HANDELS GMBH, documents officer: Mr. Semi Uguzlu, BURGSTR. 21,
DE - 44867 BOCHUM, GERMANY, hereby declare
that this product complies with the following standards, normative documents and EC directives:
Machinery Directive
(2006/42/EC)
EMC (Electromagnetic Compatibility)
(2014/30/EU)
EC Low Voltage Directive
(2014/35/EU)
RoHS Directive
(2011/65/EU)*
The manufacturer bears the full responsibility for
*
compliance with this conformity declaration. The
object of the declaration described above complies
with the requirements of the Directive 2011/65/EU
of the European Parliament and Council of 8 June
2011 on the limitations of use of certain dangerous
substances in electrical and electronic appliances.
Applied harmonised standards:
EN 60745-1:2009/A11:2010
EN 60745-2-11:2010
EN 62233:2008
EN 60335-1:2012/A11:2014
EN 60335-2-29:2004/A2:2010
EN 55014-1:2017
EN 55014-2:2015
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 50581:2012
Type/appliance designation:
Cordless branch saw FAAS 12 B2
Year of manufacture: 1 - 2018
Serial number: IAN 298707
Bochum, 20/01/2018
■ 34 │ GB
│
MT
Semi Uguzlu
- Quality Manager The right to effect technical changes in the context
of further development is reserved.
Wir beglückwünschen Sie zum Kauf Ihres neuen
Gerätes. Sie haben sich damit für ein hochwertiges
Produkt entschieden. Die Bedienungsanleitung ist Teil
dieses Produkts. Sie enthält wichtige Hinweise für
Sicherheit, Gebrauch und Entsorgung. Machen Sie
sich vor der Benutzung des Produkts mit allen Bedienund Sicherheitshinweisen vertraut. Benutzen Sie das
Produkt nur wie beschrieben und für die angegebenen Einsatzbereiche. Händigen Sie alle Unterlagen
bei Weitergabe des Produkts an Dritte mit aus.
Bestimmungsgemäßer Gebrauch
Das Gerät - normativ eine Säbelsäge - ist mit
festem Anschlag (Fußplatte) zum Sägen von Holz,
Kunststoff und Baustoffen bestimmt. Das Gerät eignet sich für grobe Sägearbeiten, gerade, kurvige
Schnitte und trennt Flächen bündig ab. Mit montiertem Haltebügel ist das Gerät zum Sägen von
Ästen geeignet. Beachten Sie die Informationen
zu Sägeblättern und Arbeitshinweise zum Sägen.
Jede andere Verwendung oder Veränderung der
Maschine gilt als nicht bestimmungsgemäß und
birgt erhebliche Unfallgefahren. Für aus bestimmungswidriger Verwendung entstandene Schäden
übernimmt der Hersteller keine Haftung. Das Gerät
ist nicht für den gewerblichen Einsatz bestimmt.
Bemessungsspannung: 12,6 V
Bemessungsstrom: 2400 mA
Ladedauer: ca. 60 min
Sicherung (innen): 2 A
Schutzklasse: II / (Doppelisolierung)
Geräuschemissionswerte:
Messwert für Geräusch ermittelt entsprechend EN
ISO 4871. Der A-bewertete Geräuschpegel des
Elektrowerkzeugs am Ort des Benutzers beträgt
typischerweise:
Schalldruckpegel: L
Unsicherheit: KpA = 3 dB
Schallleistungspegel: L
Unsicherheit: KWA = 3 dB
Gehörschutz tragen!
(Gleichstrom)
(Gleichstrom)
(Wechselstrom)
(Gleichstrom)
T2A
= 82 dB (A)
pA
= 93 dB (A)
WA
-1
■ 36 │ DE
│AT│
CH
FAAS 12 B2
Schwingungsgesamtwerte (Vektorsumme dreier
Richtungen) ermittelt entsprechend EN 60745:
Sägen von
Spanplatte: a
= 6,37 m/s
h,B
Unsicherheit K = 1,5 m/s
Sägen von
Holzbalken: a
= 9,26 m/s
h,WB
Unsicherheit K = 1,5 m/s
2
2
2
2
HINWEIS
►
Der in diesen Anweisungen angegebene
Schwingungspegel ist entsprechend einem
genormten Messverfahren gemessen worden
und kann für den Gerätevergleich verwendet
werden. Der angegebene Schwingungsemissionswert kann auch zu einer einleitenden
Einschätzung der Aussetzung verwendet
werden.
WARNUNG!
► Der Schwingungspegel wird sich entspre-
chend dem Einsatz des Elektrowerkzeugs
verändern und kann in manchen Fällen über
dem in diesen Anweisungen angegebenen
Wert liegen. Die Schwingungsbelastung
könnte unterschätzt werden, wenn das
Elektrowerkzeug regelmäßig in solcher Weise
verwendet wird. Versuchen Sie, die Belastung
durch Vibrationen so gering wie möglich zu
halten. Beispielhafte Maßnahmen zur Verringerung der Vibrationsbelastung sind das Tragen von Handschuhen beim Gebrauch des
Werkzeugs und die Begrenzung der Arbeitszeit. Dabei sind alle Anteile des Betriebszyklus zu berücksichtigen (beispielweise Zeiten,
in denen das Elektrowerkzeug abgeschaltet
ist, und solche, in denen es zwar eingeschaltet ist, aber ohne Belastung läuft).
Allgemeine
Sicherheitshinweise
für Elektrowerkzeuge
WARNUNG!
► Lesen Sie alle Sicherheitshinweise und Anwei-
sungen. Versäumnisse bei der Einhaltung der
Sicherheitshinweise und Anweisungen können
elektrischen Schlag, Brand und/oder schwere
Verletzungen verursachen.
Bewahren Sie alle Sicherheitshinweise und
Anweisungen für die Zukunft auf.
Der in den Sicherheitshinweisen verwendete Begriff
„Elektrowerkzeug“ bezieht sich auf netzbetriebene
Elektrowerkzeuge (mit Netzkabel) und auf akkubetriebene Elektrowerkzeuge (ohne Netzkabel).
1. Arbeitsplatz-Sicherheit
a) Halten Sie Ihren Arbeitsbereich sauber und
gut beleuchtet. Unordnung und unbeleuchtete
Arbeitsbereiche können zu Unfällen führen.
b) Arbeiten Sie mit dem Elektrowerkzeug nicht
in explosionsgefährdeter Umgebung, in der
sich brennbare Flüssigkeiten, Gase oder
Stäube befinden. Elektrowerkzeuge erzeugen
Funken, die den Staub oder die Dämpfe entzünden können.
c) Halten Sie Kinder und andere Personen wäh-
rend der Benutzung des Elektrowerkzeugs
fern. Bei Ablenkung können Sie die Kontrolle
über das Gerät verlieren.
2. Elektrische Sicherheit
a) Der Anschlussstecker des Elektrowerkzeuges
muss in die Steckdose passen. Der Stecker
darf in keiner Weise verändert werden.
Verwenden Sie keine Adapterstecker gemeinsam mit schutzgeerdeten Elektrowerkzeugen.
Unveränderte Stecker und passende Steckdosen verringern das Risiko eines elektrischen
Schlages.
FAAS 12 B2
DE│AT│CH
│
37 ■
b) Vermeiden Sie Körperkontakt mit geerdeten
Oberflächen, wie von Rohren, Heizungen,
Herden und Kühlschränken. Es besteht ein
erhöhtes Risiko durch elektrischen Schlag, wenn
Ihr Körper geerdet ist.
c) Halten Sie Elektrowerkzeuge von Regen oder
Nässe fern. Das Eindringen von Wasser in ein
Elektrogerät erhöht das Risiko eines elektrischen
Schlages.
weckentfremden Sie das Kabel nicht, um das
d) Z
Elektrowerkzeug zu tragen, aufzuhängen oder
um den Stecker aus der Steckdose zu ziehen.
Halten Sie das Kabel fern von Hitze, Öl,
scharfen Kanten oder sich bewegenden Geräteteilen. Beschädigte oder verwickelte Kabel
erhöhen das Risiko eines elektrischen Schlages.
e) W
enn Sie mit einem Elektrowerkzeug im
Freien arbeiten, verwenden Sie nur Verlängerungskabel, die auch für den Außenbereich
zugelassen sind. Die Anwendung eines für den
Außenbereich geeigneten Verlängerungskabels
verringert das Risiko eines elektrischen Schlages.
f) Wenn der Betrieb des Elektrowerkzeuges in
feuchter Umgebung nicht vermeidbar ist, verwenden Sie einen Fehlerstromschutzschalter.
Der Einsatz eines Fehlerstromschutzschalters vermindert das Risiko eines elektrischen Schlages.
3. Sicherheit von Personen
a) Seien Sie stets aufmerksam, achten Sie dar-
auf, was Sie tun und gehen Sie mit Vernunft
an die Arbeit mit einem Elektrowerkzeug.
Benutzen Sie kein Elektrowerkzeug, wenn Sie
krank oder müde oder unter dem Einfluss von
Drogen, Alkohol oder Medikamenten stehen.
Ein Moment der Unachtsamkeit beim Gebrauch
des Elektrowerk zeuges kann zu ernsthaften
Verletzungen führen.
b) T
ragen Sie persönliche Schutzausrüstung und
immer eine Schutzbrille. Das Tragen persönlicher
Schutzausrüstung wie Staubmaske, rutschfeste
Sicherheitsschuhe, Schutzhelm oder Gehörschutz,
je nach Art und Einsatz des Elektrowerkzeuges,
verringert das Risiko von Verletzungen.
c) Vermeiden Sie eine unbeabsichtigte
Inbetrieb nahme. Vergewissern Sie sich, dass
das Elektrowerkzeug ausgeschaltet ist, bevor
Sie es an die Stromversorgung und / oder
den Akku anschließen, es aufnehmen oder
tragen. Wenn Sie beim Tragen des Elektrowerk-
zeuges den Finger am Schalter haben oder das
Gerät bereits eingeschaltet an die Stromversorgung anschließen, kann dies zu Unfällen führen.
d) Entfernen Sie Einstellwerkzeuge oder Schrau-
benschlüssel, bevor Sie das Elektrowerkzeug
einschalten. Ein Werkzeug oder Schlüssel, der
sich in einem drehenden Geräteteil befindet,
kann zu Verletzungen führen.
e) Vermeiden Sie eine abnormale Körperhal-
tung. Sorgen Sie für einen sicheren Stand
und halten Sie jederzeit das Gleichgewicht.
Dadurch können Sie das Elektrowerkzeug in
unerwarteten Situationen besser kontrollieren.
f) Tragen Sie geeignete Kleidung. Tragen Sie
keine weite Kleidung oder Schmuck. Halten
Sie Haare, Kleidung und Handschuhe fern
von sich bewegenden Teilen. Lockere Klei-
dung, Schmuck oder lange Haare können von
sich bewegenden Teilen erfasst werden.
g) Wenn Staubabsaug- und -auffangeinrichtun-
gen montiert werden können, vergewissern
Sie sich, dass diese angeschlossen sind und
richtig verwendet werden. Die Verwendung
einer Staubabsaugung kann Gefährdungen
durch Staub verringern.
4. Verwendung und Behandlung des
Elektrowerkzeugs
a) Überlasten Sie das Gerät nicht. Verwenden
Sie für Ihre Arbeit das dafür bestimmte
Elektrowerkzeug. Mit dem passenden Elektro-
werkzeug arbeiten Sie besser und sicherer im
angegebenen Leistungsbereich.
b) Benutzen Sie kein Elektrowerkzeug, dessen
Schalter defekt ist. Ein Elektrowerkzeug, das
sich nicht mehr ein- oder ausschalten lässt, ist
gefährlich und muss repariert werden.
■ 38 │ DE
│AT│
CH
FAAS 12 B2
c) Ziehen Sie den Stecker aus der Steckdose
und / oder entfernen Sie den Akku, bevor Sie
Geräteeinstellungen vornehmen, Zubehörteile wechseln oder das Gerät weglegen. Diese
Vorsichtsmaßnahme verhindert den unbeabsichtigten Start des Elektrowerkzeuges.
d) Bewahren Sie unbenutzte Elektrowerkzeuge
außerhalb der Reichweite von Kindern auf.
Lassen Sie Personen das Gerät nicht
benutzen, die mit diesem nicht vertraut sind
oder diese Anweisungen nicht gelesen
haben. Elektrowerkzeuge sind gefährlich, wenn
sie von unerfahrenen Personen benutzt werden.
e) Pflegen Sie Elektrowerkzeuge mit Sorgfalt.
Kontrollieren Sie, ob bewegliche Teile
einwandfrei funktionieren und nicht klemmen,
ob Teile gebrochen oder so beschädigt sind,
dass die Funktion des Elektrowerkzeuges
beeinträchtigt ist. Lassen Sie beschädigte
Teile vor dem Einsatz des Gerätes reparieren.
Viele Unfälle haben ihre Ursache in schlecht
gewarteten Elektrowerkzeugen.
f) Halten Sie Schneidwerkzeuge scharf und
sauber. Sorgfältig gepflegte Schneidwerkzeuge
mit scharfen Schneidkanten verklemmen sich
weniger und sind leichter zu führen.
erwenden Sie Elektrowerkzeug, Zubehör,
g) V
Einsatzwerkzeuge usw. entsprechend diesen
Anweisungen. Berücksichtigen Sie dabei die
Arbeitsbedingungen und die auszuführende
Tätigkeit. Der Gebrauch von Elektrowerkzeugen
für andere als die vorgesehenen Anwendungen
kann zu gefährlichen Situationen führen.
5. Verwendung und Behandlung des
Akkuwerkzeugs
a) Laden Sie die Akkus nur in Ladegeräten auf,
die vom Hersteller empfohlen werden. Für
ein Ladegerät, das für eine bestimmte Art von
Akkus geeignet ist, besteht Brandgefahr, wenn
es mit anderen Akkus verwendet wird.
b) Verwenden Sie nur die dafür vorgesehenen
Akkus in den Elektrowerkzeugen. Der Gebrauch von anderen Akkus kann zu Verletzungen und Brandgefahr führen.
c) Halten Sie den nicht benutzten Akku fern von
Büroklammern, Münzen, Schlüsseln, Nägeln,
Schrauben oder anderen kleinen Metallgegenständen, die eine Überbrückung der
Kontakte verursachen könnten. Ein Kurzschluss
zwischen den Akkukontakten kann Verbrennungen oder Feuer zur Folge haben.
d) Bei falscher Anwendung kann Flüssigkeit aus
dem Akku austreten. Vermeiden Sie den Kontakt damit. Bei zufälligem Kontakt mit Wasser
abspülen. Wenn die Flüssigkeit in die Augen
kommt, nehmen Sie zusätzlich ärztliche Hilfe
in Anspruch. Austretende Akkuflüssigkeit kann
zu Hautreizungen oder Verbrennungen führen.
VORSICHT! EXPLOSIONSGEFAHR!
Laden Sie nicht aufladbare Batterien
niemals auf.
Schützen Sie den Akku vor Hitze,
z. B. auch vor dauernder Sonneneinstrahlung, Feuer, Wasser und
Feuchtigkeit. Es besteht Explosionsge-
fahr.
6. Service
a) Lassen Sie Ihr Elektrowerkzeug nur von quali-
fiziertem Fachpersonal und nur mit OriginalErsatzteilen reparieren. Damit wird sicherge-
stellt, dass die Sicherheit des Elektrowerkzeugs
erhalten bleibt.
Gerätespezifische
Sicherheitshinweise für Säbelsägen
■ Halten Sie das Elektrowerkzeug an den
isolierten Griffflächen, wenn Sie Arbeiten
ausführen, bei denen das Elektrowerkzeug
verborgene Stromleitungen oder das eigene
Netzkabel treffen kann. Der Kontakt mit einer
spannungsführenden Leitung kann auch metallene Geräteteile unter Spannung setzen und zu
einem elektrischen Schlag führen.
■ Tragen Sie eine Staubschutzmaske!
FAAS 12 B2
DE│AT│CH
│
39 ■
Sicherheitshinweise für
Ladegeräte
■ Dieses Gerät kann von Kindern
ab 8 Jahren und darüber sowie
von Personen mit verringerten
physischen, sensorischen oder
mentalen Fähigkeiten oder Mangel an Erfahrung und Wissen
benutzt werden, wenn sie beaufsichtigt oder bezüglich des
sicheren Gebrauchs des Gerätes
unterwiesen wurden und die
daraus resultierenden Gefahren
verstehen. Kinder dürfen nicht mit
dem Gerät spielen. Reinigung
und Benutzer-Wartung dürfen
nicht von Kindern ohne Beaufsichtigung durchgeführt werden.
Das Ladegerät ist nur für den
Betrieb im Innenbereich
geeignet.
■ Wenn die Netzanschlussleitung
dieses Gerätes beschädigt wird,
muss sie durch den Hersteller
oder seinen Kundendienst oder
eine ähnlich qualifizierte Person
ersetzt werden, um Gefährdungen zu vermeiden.
Arbeitshinweise zum Sägen
■ Prüfen Sie das zu bearbeitende Material auf
Fremdkörper wie Nägel, Schrauben etc. und
entfernen Sie diese.
■ Schalten Sie das Gerät sofort aus, wenn das
Sägeblatt verklemmt. Spreizen Sie den bereits
gesägten Spalt mit einem geeigneten Werkzeug
und ziehen Sie die Säbelsäge heraus.
■ Sägen Sie das Material mit gleichmäßigem
Vorschub.
Originalzubehör / -zusatzgeräte
■ Benutzen Sie nur Zubehör und Zusatzgeräte,
die in der Gebrauchsanweisung angegeben
sind. Der Gebrauch anderer als in der Bedie-
nungsanleitung empfohlener Einsatzwerkzeuge
oder anderen Zubehörs kann eine Verletzungsgefahr für Sie bedeuten.
Informationen zu Sägeblättern
Sie können jedes Sägeblatt verwenden, vorausgesetzt, es ist mit der passenden Aufnahme - ½“
(12,7 mm) Universalschaft versehen. Es sind für
jeden Einsatzzweck Ihrer Säbelsäge optimierte
Sägeblätter in verschiedenen Längen im Handel
erhältlich.
HINWEIS
TPI = teeth per inch = die Anzahl der Zähne
►
je 2,54 cm
■ 40 │ DE
│AT│
CH
FAAS 12 B2
Vor der Inbetriebnahme
Akku-Pack laden
VORSICHT!
► Ziehen Sie immer den Netzstecker, bevor
Sie den Akku-Pack
Ladegerät nehmen bzw. einsetzen.
■ Laden Sie den Akku-Pack nie, wenn die
Umgebungstemperatur unterhalb 10 °C oder
oberhalb 40 °C liegt.
♦ Stecken Sie den Akku-Pack in das Schnell-
Ladegerät
♦ Stecken Sie den Netzstecker in die Steckdose.
Die Kontroll-LED leuchtet rot.
♦ Die grüne Kontroll-LED signalisiert Ihnen,
dass der Ladevorgang abgeschlossen und der
Akku-Pack einsatzbereit ist.
♦ Schieben Sie den Akku-Pack in das Gerät
ein.
♦ Schalten Sie das Schnell-Ladegerät zwischen
aufeinanderfolgenden Ladevorgängen für
mindestens 15 Minuten ab. Ziehen Sie dazu
den Netzstecker.
.
Akku-Pack ins Gerät
einsetzen / entnehmen
Akku-Pack einsetzen:
♦ Lassen Sie den Akku-Pack in den Handgriff
einrasten.
Akku-Pack entnehmen:
♦ Drücken Sie die beiden Tasten zur Entriegelung
und entnehmen Sie den Akku-Pack .
Akkuzustand prüfen
♦ Drücken Sie zum Prüfen des Akkuzustands
die Einschaltsperre und den EIN- / AUSSchalter . Der Zustand bzw. die Restleistung
wird in der Akkuzustandsanzeige wie folgt
angezeigt:
♦ Drücken Sie die Entriegelungstaste .
♦ Schieben Sie den Haltebügel über die Füh-
rungen der Fußplatte in das Gerät.
♦ Arretieren Sie die Entriegelungstaste
Haltebügel entnehmen:
♦ Drücken Sie die Entriegelung und ziehen
Sie den Haltebügel nach vorne aus der
Führung.
.
Sägeblatt montieren / wechseln
Tragen Sie beim Einsetzen / Wechsel des Sägeblattes Schutzhandschuhe.
♦ Drehen Sie das Schnellspannfutter vollstän-
dig in Pfeilrichtung und halten Sie es gedreht.
♦ Drücken Sie das benötigte Sägeblatt bis zum
Anschlag in das Schnellspannfutter .
ACHTUNG!
► Die Zähne des Sägeblatts müssen dabei
nach unten zeigen!
♦ Lassen Sie das Schnellspannfutter los, es
muss in seine Ausgangsposition zurückkehren.
Das Sägeblatt ist nun verriegelt.
FAAS 12 B2
DE│AT│CH
│
41 ■
Inbetriebnahme
Ein- / ausschalten
Einschalten:
♦ Drücken Sie die Einschaltsperre .
♦ Drücken Sie den EIN- / AUS-Schalter .
Ausschalten:
♦ Lassen Sie den EIN- / AUS-Schalter los.
Sägemethoden
A) Arbeiten ohne Haltebügel (siehe Abb. E):
■ Bei größeren Astdurchmessern oder Sägen von
Holz, Kunststoff und Baustoffen arbeiten Sie
OHNE Haltebügel. Das Sägestück muss an der
Fußplatte anliegen. Bewegen Sie die Säge bei
runden Werkstücken im Wiegeschnitt.
A1) Bündig sägen:
■ Mit flexiblen Sägeblättern, entsprechende Län-
ge vorausgesetzt, können Sie hervorstehende
Werkstücke wie z. B. Rohre unmittelbar an der
Wand absägen.
1. Legen Sie das Sägeblatt direkt an der Wand an.
2. Biegen Sie es durch seitlichen Druck auf die
Säbelsäge so, dass die Fußplatte
der Wand anliegt.
3. Schalten Sie das Gerät ein und sägen Sie das
Werkstück mit konstantem Druck ab.
seitlich an
Wartung und Reinigung
WARNUNG! VERLETZUNGSGEFAHR!
Schalten Sie vor allen Arbeiten am
Gerät das Gerät aus und entnehmen
Sie den Akku.
■ Entfernen Sie vor allen Arbeiten am Elektrowerk-
zeug stets das Sägeblatt.
■ Halten Sie das Gerät und die Lüftungsschlitze
stets sauber. Bei verstopften Lüftungsschlitzen
droht eine Überhitzung und / oder eine Beschädigung des Gerätes.
■ Reinigen Sie das Gerät nach Abschluss der
Arbeit.
■ Es dürfen keine Flüssigkeiten in das Innere
des Gerätes gelangen. Verwenden Sie zum
Reinigen des Gehäuses ein Tuch. Verwenden
Sie niemals Benzin, Lösungsmittel oder Reiniger,
die Kunststoff angreifen.
■ Reinigen Sie die Sägeblattaufnahme ggf. mit ei-
nem Pinsel oder durch Ausblasen mit Druckluft.
■ Soll ein Lithium-Ionen-Akku längere Zeit gela-
gert werden, muss regelmäßig der Ladezustand
kontrolliert werden. Der optimale Ladezustand
liegt zwischen 50 % und 80 %. Das optimale
Lagerungsklima ist kühl und trocken.
A2) Tauchsägen (siehe Abb. F):
VORSICHT! RÜCKSCHLAGGEFAHR!
► Tauchschnitte dürfen nur in weichen Werkstof-
fen (Holz o. ä.) durchgeführt werden.
1. Setzen Sie die Säbelsäge mit der Unterkante der
Fußplatte auf das Werkstück auf. Schalten
Sie das Gerät ein.
2. Kippen Sie die Säbelsäge nach vorn und
tauchen mit dem Sägeblatt in das Werkstück ein.
3. Stellen Sie die Säbelsäge senkrecht und sägen
Sie weiter entlang der Schnittlinie.
B) Arbeiten mit Haltebügel (siehe Abb. G):
♦ Bewegen Sie die Säge mit leichtem Druck nach
unten.
■ 42 │ DE
│AT│
CH
FAAS 12 B2
Garantie der
Kompernaß Handels GmbH
Sehr geehrte Kundin, sehr geehrter Kunde,
Sie erhalten auf dieses Gerät 3 Jahre Garantie ab
Kaufdatum. Im Falle von Mängeln dieses Produkts
stehen Ihnen gegen den Verkäufer des Produkts
gesetzliche Rechte zu. Diese gesetzlichen Rechte
werden durch unsere im Folgenden dargestellte
Garantie nicht eingeschränkt.
Garantiebedingungen
Die Garantiefrist beginnt mit dem Kaufdatum. Bitte
bewahren Sie den Original-Kassenbon gut auf.
Diese Unterlage wird als Nachweis für den Kauf
benötigt.
Tritt innerhalb von drei Jahren ab dem Kaufdatum
dieses Produkts ein Material- oder Fabrikationsfehler auf, wird das Produkt von uns – nach unserer
Wahl – für Sie kostenlos repariert oder ersetzt.
Diese Garantieleistung setzt voraus, dass innerhalb
der Drei-Jahres-Frist das defekte Gerät und der
Kaufbeleg (Kassenbon) vorgelegt und schriftlich
kurz beschrieben wird, worin der Mangel besteht
und wann er aufgetreten ist.
Wenn der Defekt von unserer Garantie gedeckt ist,
erhalten Sie das reparierte oder ein neues Produkt
zurück. Mit Reparatur oder Austausch des Produkts
beginnt kein neuer Garantiezeitraum.
Garantiezeit und gesetzliche
Mängelansprüche
Die Garantiezeit wird durch die Gewährleistung
nicht verlängert. Dies gilt auch für ersetzte und
reparierte Teile. Eventuell schon beim Kauf vorhandene Schäden und Mängel müssen sofort nach
dem Auspacken gemeldet werden. Nach Ablauf
der Garantiezeit anfallende Reparaturen sind
kostenpflichtig.
Garantieumfang
Das Gerät wurde nach strengen Qualitätsrichtlinien
sorgfältig produziert und vor Auslieferung gewissenhaft geprüft.
Die Garantieleistung gilt für Material- oder Fabrikationsfehler. Diese Garantie erstreckt sich nicht auf
Produktteile, die normaler Abnutzung ausgesetzt
sind und daher als Verschleißteile angesehen werden können oder für Beschädigungen an zerbrechlichen Teilen, z. B. Schalter, Akkus, Backformen
oder Teile die aus Glas gefertigt sind.
Diese Garantie verfällt, wenn das Produkt beschädigt, nicht sachgemäß benutzt oder gewartet wurde. Für eine sachgemäße Benutzung des Produkts
sind alle in der Bedienungsanleitung aufgeführten
Anweisungen genau einzuhalten. Verwendungszwecke und Handlungen, von denen in der Bedienungsanleitung abgeraten oder vor denen gewarnt
wird, sind unbedingt zu vermeiden.
Das Produkt ist nur für den privaten und nicht
für den gewerblichen Gebrauch bestimmt. Bei
missbräuchlicher und unsachgemäßer Behandlung,
Gewaltanwendung und bei Eingriffen, die nicht
von unserer autorisierten Service-Niederlassung
vorgenommen wurden, erlischt die Garantie.
Abwicklung im Garantiefall
Um eine schnelle Bearbeitung ihres Anliegens
zu gewährleisten, folgen Sie bitte den folgenden
Hinweisen:
■ Bitte halten Sie für alle Anfragen den Kassen-
bon und die Artikelnummer (z. B. IAN 12345)
als Nachweis für den Kauf bereit.
■ Die Artikelnummer entnehmen Sie bitte dem
Typenschild, einer Gravur, auf dem Titelblatt
ihrer Anleitung (unten links) oder als Aufkleber
auf der Rück- oder Unterseite.
■ Sollten Funktionsfehler oder sonstige Mängel
auftreten, kontaktieren Sie zunächst die nachfolgend benannte Serviceabteilung telefonisch
oder per E-Mail.
■ Ein als defekt erfasstes Produkt können Sie dann
unter Beifügung des Kaufbelegs (Kassenbon)
und der Angabe, worin der Mangel besteht und
wann er aufgetreten ist, für Sie portofrei an die
Ihnen mitgeteilte Service-Anschrift übersenden.
FAAS 12 B2
DE│AT│CH
│
43 ■
Auf www.lidl-service.com können Sie
diese und viele weitere Handbücher,
Produktvideos und Software herunterladen.
Service
WARNUNG!
► Lassen Sie Ihre Geräte von der Servicestelle
oder einer Elektrofachkraft und nur mit
Original-Ersatzteilen reparieren. Damit wird
sichergestellt, dass die Sicherheit des Gerätes
erhalten bleibt.
► Lassen Sie den Austausch des Steckers
oder der Netzleitung immer vom Hersteller
des Gerätes oder seinem Kundendienst
ausführen. Damit wird sichergestellt, dass die
Sicherheit des Gerätes erhalten bleibt.
HINWEIS
Nicht aufgeführte Ersatzteile (wie z. B. Akku,
►
Schalter oder Haltebügel) können Sie über
unsere Callcenter bestellen.
Service Deutschland
Tel.: 0800 5435 111 (Kostenfrei aus dem
dt. Festnetz/Mobilfunknetz)
E-Mail: kompernass@lidl.de
Bitte beachten Sie, dass die folgende Anschrift
keine Serviceanschrift ist. Kontaktieren Sie zunächst
die benannte Servicestelle.
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
DE - 44867 BOCHUM
DEUTSCHLAND
www.kompernass.com
Entsorgung
Die Verpackung besteht aus umwelt-
freundlichen Materialien, die Sie über
die örtlichen Recyclingstellen entsorgen
können.
Werfen Sie Elektrowerkzeuge nicht
in den Hausmüll!
Gemäß Europäischer Richtlinie 2012/19/EU
müssen verbrauchte Elektrowerkzeuge getrennt
gesammelt und einer umweltgerechten Wiederverwertung zugeführt werden.
Werfen Sie Akkus nicht in den
Hausmüll!
Defekte oder verbrauchte Akkus müssen gemäß
Richtlinie 2006/66/EC recycelt werden. Geben
Sie Akku-Pack und / oder das Gerät über die angebotenen Sammeleinrichtungen zurück.
Über Entsorgungsmöglichkeiten für ausgediente
Elektrowerkzeuge / Akku-Packs informieren Sie sich
bitte bei Ihrer Gemeinde- oder Stadtverwaltung.
Entsorgen Sie die Verpackung
umweltgerecht.
Beachten Sie die Kennzeichnung auf
den verschiedenen Verpackungsmaterialien und trennen Sie diese gegebenenfalls gesondert. Die Verpackungsmaterialien sind gekennzeichnet mit
Abkürzungen (a) und Ziffern (b) mit
folgender Bedeutung:
1–7: Kunststoffe,
20–22: Papier und Pappe,
80–98: Verbundstoffe
Möglichkeiten zur Entsorgung des
ausgedienten Produkts erfahren Sie
bei Ihrer Gemeinde- oder Stadtverwaltung.
■ 44 │ DE
│AT│
CH
FAAS 12 B2
Original-Konformitätserklärung
Wir, KOMPERNASS HANDELS GMBH, Dokumentenverantwortlicher: Herr Semi Uguzlu,
BURGSTR. 21, DE - 44867 BOCHUM, DEUTSCHLAND, erklären hiermit, dass dieses Produkt
mit den folgenden Normen, normativen Dokumenten und EG-Richtlinien übereinstimmt:
*Die alleinige Verantwortung für die Ausstellung dieser Konformitätserklärung trägt der Hersteller.
Der oben beschriebene Gegenstand der Erklärung erfüllt die Vorschriften der Richtlinie 2011/65/EU
des Europäischen Parlaments und des Rates vom 8. Juni 2011 zur Beschränkung der Verwendung
bestimmter gefährlicher Stoffe in Elektro- und Elektronikgeräten.
Angewandte harmonisierte Normen:
EN 60745-1:2009/A11:2010
EN 60745-2-11:2010
EN 62233:2008
EN 60335-1:2012/A11:2014
EN 60335-2-29:2004/A2:2010
EN 55014-1:2017
EN 55014-2:2015
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 50581:2012
Typ / Gerätebezeichnung: Akku-Astsäge FAAS 12 B2
Herstellungsjahr: 01 - 2018
Seriennummer: IAN 298707
Bochum, 20.01.2018
Semi Uguzlu
- Qualitätsmanager Technische Änderungen im Sinne der Weiterentwicklung sind vorbehalten.
FAAS 12 B2
DE│AT│CH
│
45 ■
■ 46 │ DE
│AT│
CH
FAAS 12 B2
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
DE - 44867 BOCHUM
DEUTSCHLAND
www.kompernass.com
Versione delle informazioni · Estado das informações
Last Information Update · Stand der Informationen:
04 / 2018 · Ident.-No.: FAAS12B2-032018-2
IAN 298707
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.